Dear guys,
unfortunately the last problem is coincided with the break of the modem
(Alcatel Speedtouch USB).
I have check the modem on the systems linux, bsd and windows, always with
the same result.
Finally I have bought a new modem ethernet and the line is returned up
without problems.
So, I
Hi guys, tonight I have reconfigured my lan and I have re-checked my
configuration.
I have tried different configurations, but the problem persist.
I have always used vpi.vci 8.35 for Italy
/var/log/messages
...
Feb 8 00:45:15 Minas_Tirith /bsd: ugen0 at uhub1 port 1
Feb 8 00:45:15
Hi people, from today my connection don't work more...why ? I have looked that
in my log,
/var/log/daemon
Feb 7 02:02:32 Minas_Tirith pppoa2[27610]: Cell had wrong VPI(1313)/VCI(9132)
(OAM?) PTI=0x03
Feb 7 02:02:42 Minas_Tirith pppoa2[27610]: CRC error in an AAL5 frame
Feb 7 02:02:49
Hi people, from today my connection don't work more...why ? I have looked that
in my log,
/var/log/daemon
Feb 7 02:02:32 Minas_Tirith pppoa2[27610]: Cell had wrong VPI(1313)/VCI(9132)
(OAM?) PTI=0x03
Feb 7 02:02:42 Minas_Tirith pppoa2[27610]: CRC error in an AAL5 frame
Feb 7 02:02:49
Hi guys, yeasterday I have compiled the source of speedtouch, after update from
cvs.
It's ok, but like the last time, after a short period I riceive this error in
the log file:
Dec 23 02:35:00 Minas_Tirith modem_run[14643]: modem_run version 1.3.1 started
by root uid 0
Dec 23 02:35:34
On Fri, 03 Dec 2004 14:13:36 +0100
Benoit PAPILLAULT [EMAIL PROTECTED] wrote:
Note: replace make by gmake on BSD systems.
So, try again with gmake instead of make. This is a common trap.
Thanks Benoit, with gmake I don't receive errors :-)
$ gmake
cd src gmake
gmake[1]: Entering
On Thu, 02 Dec 2004 02:52:19 +
Andrew Benton [EMAIL PROTECTED] wrote:
Have you tried different firmware?
I have had some problems with the firmware.
The file KQD6_R204.zip contain two files bin that are not loaded.
So, now I use the bin file KQD6both.eni.
I try on other sources...
On Thu, 02 Dec 2004 20:58:25 +0100
Benoit PAPILLAULT [EMAIL PROTECTED] wrote:
Can you post your compile log. The current version of the speedtouch
driver is 1.3.1 btw. Sending your compiled log will help other people
using OpenBSD 3.5.
Benoit PAPILLAULT
Sure Benoit, and excuse if I have
On Thu, 02 Dec 2004 02:52:19 +
Andrew Benton [EMAIL PROTECTED] wrote:
Have you tried different firmware?
I have changed my firmware; I have tried a bin of size:
523K Dec 2 18:22 /usr/local/libdata/mgmt.o
in comparison to
330K Nov 26 16:17 KQD6_R204.zip
991B Dec 1
Alessio Piazza a écrit :
Ok, OpenBSD 3.5 work fine with driver speedotouch-1.2 beta
2...thanks at all:)
The compilation's phase was finished without errors...while I had
problems with1.2 and 1.3 version, respect to make and make install
session.. I'll attend future development ;)
10 matches
Mail list logo