[speedtouch] Re: Speedtouch on *BSD
Francois Rogler a écrit : Hi Guys, I guess I have to give you some explanations. I am still the maintainer of the BSD part (yes, it's written on the website).. Unfortunatly, the last 2 years, I didn't do any dev on the driver, just a few corrections on docs and scripts. For the personal part, I have been moving around with no internet connection at home for about 2 years. I just settled down 1 month ago and sent the signup form for the internet connection 3 days ago ! Hopefuly I'll be connected in a few weeks. No problem Francois. I have been maintaining the BSD part by checking that each release compiled fine on all BSD variants (using gmake). However, I've not tested if it works correctly, but since I did not change the BSD specific code, it should! Benoit PAPILLAULT Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch on *BSD
Hi. As far as I know, that is a big detail expecting to be fixed on the modem_run driver. Every time the USB plug is detached, the driver hangs. And the process can't be iniciated again in 1.3.1 (due the fact that only one registered instance of modem_run is allowed). And the easy way to get connection again is rebooting. The way in Linux to know when a device is dettached or attached is usbdevfs. That implementation is used on modem_run to catch the events on the interface, right? The manual page of usb(4) on NetBSD say: -snip USB EVENT INTERFACE All USB events are reported via the /dev/usb device. This devices can be opened for reading and each read(2) will yield an event record (if something has happened). The poll(2) system call can be used to determine if an event record is available for reading. ... Note that that there is a separation between device and device driver events. A device event is generated when a physical USB device is attached or detached. A single USB device may have zero, one, or many device drivers associated with it. -snip So, this could be associated in some way with libpusb-bsd. I don't know about other BSD's, but it has to be done on a similar way. When the connection dies: native ppp on BSD works a lot better than userppp. It is able to reconnect and set the default route and MTU properly. Since NetBSD 2.0, there are in-kernel threads available, but I don't know if is related to pppoa2. The rest is to elaborate a good rc script that can be integrated to the /etc/ifconfig.* files, and to solve a misterious murder (signal 1) of the father or the son after the boot at starting of pppoa2. Regards -- César Catrián C. http://mioficina.cjc.cl --- Francois Rogler [EMAIL PROTECTED] escribió: Hi Guys, I guess I have to give you some explanations. I am still the maintainer of the BSD part (yes, it's written on the website).. Unfortunatly, the last 2 years, I didn't do any dev on the driver, just a few corrections on docs and scripts. For the personal part, I have been moving around with no internet connection at home for about 2 years. I just settled down 1 month ago and sent the signup form for the internet connection 3 days ago ! Hopefuly I'll be connected in a few weeks. Do you know if there are any plans in the future for further *BSD support in the speedtouch software, as in: Right now, there is no big announcement from me. 1. Support for when the connection dies: In Linux this was handled by some system call which allowed the modem (USB flavour) to do a hardware reset without having to reboot? 2. Any params to modem_run to allow a hardware reset of the USB modem? Is that possible? I'm using v 1.2 of the package as a lot of the new functionality doesn't work on *BSD. (so the features I'm mentioning may already be in 1.3.x, but are not supported yet on *BSD) Anyway let's try to handle thoses problems. The open points that needs to be reviwed are : - 1.3 working on every BSD ? if not why ? (btw now gmake is mandatory to compile the driver) - hard reset of the modem (The 2 points you mentionned deals with it or did I miss something?) Is there anyother problem with the driver under BSD ? Open and Net still use pppoa2 cauz of the lack of good thread library ? Anyway, I promise I'll have a look at your request very soon. Many thanks, Simon. About the futur of the project (BSD part), now as I am working, I don't have much free time. So if someone is interested in taking over that job, there is no problem. I can also give him some hints and help. Just let me know ! Have Fun -- Francois Rogler _ Do You Yahoo!? Información de Estados Unidos y América Latina, en Yahoo! Noticias. Visítanos en http://noticias.espanol.yahoo.com Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch on *BSD
Hi All, Do you know if there are any plans in the future for further *BSD support in the speedtouch software, as in: 1. Support for when the connection dies: In Linux this was handled by some system call which allowed the modem (USB flavour) to do a hardware reset without having to reboot? 2. Any params to modem_run to allow a hardware reset of the USB modem? Is that possible? I'm using v 1.2 of the package as a lot of the new functionality doesn't work on *BSD. (so the features I'm mentioning may already be in 1.3.x, but are not supported yet on *BSD) Many thanks, Hi Same questions here, is the *BSD package always maintained coz nothing seems to be done...? Simon. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] -- Raimondeau Guillaume Utilsez Tux!!! ça marche mieux :) Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch on *BSD
Hi Guys, I guess I have to give you some explanations. I am still the maintainer of the BSD part (yes, it's written on the website).. Unfortunatly, the last 2 years, I didn't do any dev on the driver, just a few corrections on docs and scripts. For the personal part, I have been moving around with no internet connection at home for about 2 years. I just settled down 1 month ago and sent the signup form for the internet connection 3 days ago ! Hopefuly I'll be connected in a few weeks. Do you know if there are any plans in the future for further *BSD support in the speedtouch software, as in: Right now, there is no big announcement from me. 1. Support for when the connection dies: In Linux this was handled by some system call which allowed the modem (USB flavour) to do a hardware reset without having to reboot? 2. Any params to modem_run to allow a hardware reset of the USB modem? Is that possible? I'm using v 1.2 of the package as a lot of the new functionality doesn't work on *BSD. (so the features I'm mentioning may already be in 1.3.x, but are not supported yet on *BSD) Anyway let's try to handle thoses problems. The open points that needs to be reviwed are : - 1.3 working on every BSD ? if not why ? (btw now gmake is mandatory to compile the driver) - hard reset of the modem (The 2 points you mentionned deals with it or did I miss something?) Is there anyother problem with the driver under BSD ? Open and Net still use pppoa2 cauz of the lack of good thread library ? Anyway, I promise I'll have a look at your request very soon. Many thanks, Simon. About the futur of the project (BSD part), now as I am working, I don't have much free time. So if someone is interested in taking over that job, there is no problem. I can also give him some hints and help. Just let me know ! Have Fun -- Francois Rogler Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
