On Wed, Jun 26, 2013 at 06:55:01, Fernandes, Joel wrote:
From: Joel A Fernandes agnel.j...@gmail.com
A new reg-offset property was added to account for register offsets
in some omap-hsmmc's. Document the new property.
Small nitpick
I usually get feedback that any driver DT changes and the
On Sun, Jun 02, 2013 at 00:57:26, Mark Brown wrote:
On Fri, May 31, 2013 at 03:43:05PM +0530, Hebbar Gururaja wrote:
Amend the spi omap controller to optionally take a pin control
handle and set the state of the pins to:
- default on boot, resume and before performing an spi transfer
On Fri, May 10, 2013 at 15:26:29, Mark Brown wrote:
On Tue, May 07, 2013 at 10:47:31AM +, Hebbar, Gururaja wrote:
On Tue, May 07, 2013 at 14:25:35, Mark Brown wrote:
There's also been some discussion about factoring out the suspend/resume
code since it's going to get equally
On Tue, May 07, 2013 at 14:25:35, Mark Brown wrote:
On Tue, May 07, 2013 at 03:56:09AM +, Hebbar, Gururaja wrote:
There are cases where driver('s) needs to place pin-mux's to sleep on
suspend
default/idle on resume. For such cases Pinctrl needs to be handled inside
the driver
On Tue, May 07, 2013 at 01:06:38, Mark Brown wrote:
Since commit ab78029 (drivers/pinctrl: grab default handles from device
core) we can rely on device core for handling pinctrl so remove
devm_pinctrl_get_select_default() from the driver.
NACK.
There are cases where driver('s) needs to place
On Fri, Jan 11, 2013 at 11:18:37, Porter, Matt wrote:
Move mach-davinci/dma.c to common/edma.c so it can be used
by OMAP (specifically AM33xx) as well. This just moves the
private EDMA API and enables it to build on OMAP.
Signed-off-by: Matt Porter mpor...@ti.com
---
arch/arm/Kconfig
On Fri, Jan 11, 2013 at 11:18:41, Porter, Matt wrote:
The binding definition is based on the generic DMA controller
binding.
Signed-off-by: Matt Porter mpor...@ti.com
---
Documentation/devicetree/bindings/dma/ti-edma.txt | 51
+
1 file changed, 51 insertions(+)
Matt,
On Thu, Oct 18, 2012 at 18:56:52, Porter, Matt wrote:
Adds AM33XX MMC support for am335x-bone and am335x-evm.
I want to test Suspend/Resume feature on omap hsmmc driver.
Do you any tree based on mainline kernel v3.8-rc1 with these edma mmc
patches.
Signed-off-by: Matt Porter
On Thu, Oct 18, 2012 at 18:56:39, Porter, Matt wrote:
...snip...
...snip...
...snip...
This series adds DMA Engine support for AM33xx, which uses
an EDMA DMAC. The EDMA DMAC has been previously supported by only
a private API implementation (much like the situation with OMAP
DMA) found on
On Thu, Oct 18, 2012 at 18:56:44, Porter, Matt wrote:
Adds support for the per-EDMA channel event mux. This is required
for any peripherals using DMA crossbar mapped events.
Signed-off-by: Matt Porter mpor...@ti.com
---
arch/arm/common/edma.c | 63
Matt
On Fri, Oct 12, 2012 at 00:34:33, Porter, Matt wrote:
AM33xx requires special handling in hsmmc initialization
platform glue.
Since AM335x boots mainly through DT, do we still need this patch.
This function will be called in case of initializing hsmmc with
Platform data.
On Fri, Sep 21, 2012 at 23:52:11, Porter, Matt wrote:
On Fri, Sep 21, 2012 at 08:27:07AM +, Hebbar, Gururaja wrote:
On Thu, Sep 20, 2012 at 20:13:33, Porter, Matt wrote:
This series adds DMA Engine support for AM33xx, which uses
an EDMA DMAC. The EDMA DMAC has been previously
On Fri, Sep 21, 2012 at 23:52:11, Porter, Matt wrote:
On Fri, Sep 21, 2012 at 08:27:07AM +, Hebbar, Gururaja wrote:
On Thu, Sep 20, 2012 at 20:13:33, Porter, Matt wrote:
This series adds DMA Engine support for AM33xx, which uses
an EDMA DMAC. The EDMA DMAC has been previously
On Thu, Sep 20, 2012 at 20:13:34, Porter, Matt wrote:
Move mach-davinci/dma.c to common/edma.c so it can be used
by OMAP (specifically AM33xx atm) as well. This just moves
the private EDMA API but does not support OMAP.
Signed-off-by: Matt Porter mpor...@ti.com
---
arch/arm/Kconfig
On Thu, Sep 20, 2012 at 20:13:33, Porter, Matt wrote:
This series adds DMA Engine support for AM33xx, which uses
an EDMA DMAC. The EDMA DMAC has been previously supported by only
a private API implementation (much like the situation with OMAP
DMA) found on the DaVinci family of SoCs.
There
On Thu, Sep 20, 2012 at 20:13:38, Porter, Matt wrote:
The binding definition is based on the generic DMA controller
binding.
Signed-off-by: Matt Porter mpor...@ti.com
---
Documentation/devicetree/bindings/dma/ti-edma.txt | 49
+
1 file changed, 49 insertions(+)
On Thu, Sep 20, 2012 at 20:13:36, Porter, Matt wrote:
Adds support for parsing the TI EDMA DT data into the required
EDMA private API platform data.
Calls runtime PM API only in the DT case in order to unidle the
associated hwmods on AM335x.
Signed-off-by: Matt Porter mpor...@ti.com
---
On Fri, Sep 21, 2012 at 14:59:23, Russell King - ARM Linux wrote:
On Thu, Sep 20, 2012 at 10:43:34AM -0400, Matt Porter wrote:
Move mach-davinci/dma.c to common/edma.c so it can be used
by OMAP (specifically AM33xx atm) as well. This just moves
the private EDMA API but does not support
18 matches
Mail list logo
