see **** injected in your email below Paul Tegler [EMAIL PROTECTED] www.teglerizer.com
----- Original Message ----- From: "Harve Thorn" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <spitfires@autox.team.net>; <[EMAIL PROTECTED]> Sent: Tuesday, September 25, 2007 8:13 AM Subject: >>NASS help on mounting 1500 hardtop needed > Greetings... > > I am mounting my hardtop for the first time and have a few questions :) > > A. It appears from various illustrations that the two spacer tubes at the > front mount with the flanged end up - against the hardtop.. Correct? **** correct > > B. What bolt is needed for the front connection (through the spacer tube) > I see and read references to both a headed bolt and an all-threaded > bolt. The front bolts that I have are headed. Which is supposed to be > used? a headed bolt and flat washer.... be caeful of the length so it doesn't go too far through and dentth sheet metal of the hardtop > > C. I have read several comments re the "underside of the hardtop where it > rests on the read edge." Apparently the top can damage the paint on the > rear deck. I have the "seals" that are noted in the various catalogs. I > have read that different people have done different things to protect > this area - everything from thicker "seals" to using the "c" shaped > chrome door edge guard molding to trim the bottom edge. Suggestions? *****Just dont crank it down that tight. The stock heavy pads if installed correctly will stop it from hitting the paint work. I too use the door chrome edge gaurd just to be safe. > > Many thanks!! > > Harve > > Harve Thorn > NASS # 79 > > > >> To unsubscribe send an empty email to: [EMAIL PROTECTED] > >> NASS Home Site nasshq resources http://www.nasshq.org > >> Full Membership details: http://www.nasshq.org/docs/memberapp.html > > Yahoo! Groups Links > > <*> To visit your group on the web, go to: > http://groups.yahoo.com/group/nass/ > > <*> Your email settings: > Individual Email | Traditional > > <*> To change settings online go to: > http://groups.yahoo.com/group/nass/join > (Yahoo! ID required) > > <*> To change settings via email: > mailto:[EMAIL PROTECTED] > mailto:[EMAIL PROTECTED] > > <*> To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > <*> Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ _______________________________________________ [EMAIL PROTECTED] Spitfires@autox.team.net http://autox.team.net/mailman/listinfo/spitfires