The Khadas Tone Board is a great match for pCP on Pi. It sounds great.
Jim
https://jukeradio.double6.net
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
*Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
*Dining Room* SB
Man in a van wrote:
> Yes. then follow the instructions, I use hw:CARD=Control,DEV=0
>
> The ones in the the drop down are mostly what are called Hats
>
> https://www.raspberrypi.com/news/introducing-raspberry-pi-hats/
>
> which require a specific code (overlay) to be implemented in the
>
Man in a van wrote:
> Yes. then follow the instructions, I use hw:CARD=Control,DEV=0
>
> The ones in the the drop down are mostly what are called Hats
>
> https://www.raspberrypi.com/news/introducing-raspberry-pi-hats/
>
> which require a specific code (overlay) to be implemented in the
>
anglecard48 wrote:
> So, the correct selection is the one shown in the attached screen grab?
> I was thinking that since many of the DAC brands are shown in the pick
> list that the Khadas maybe isn't supported. But I'll be OK with Khadas
> Tone 1 if I just select USB Audio as shown. Right?
>
Man in a van wrote:
> Select usb input from the dropdown, save and then follow the
> instructions
>
> ronnie
So, the correct selection is the one shown in the attached screen grab?
I was thinking that since many of the DAC brands are shown in the pick
list that the Khadas maybe isn't
anglecard48 wrote:
> Hello,
>
> I currently use pCP. I'm adding a second, separate system. Can I use a
> Khadas Tone 1 DAC with pCP? It is an ES9038Q2M 32-bit stereo audio DAC
> that I would connect to my Raspberry Pi 4 via USB.
>
> I do not see Khadas or Tone 1 or ES9038Q2M on the DAC
Hello,
I currently use pCP. I'm adding a second, separate system. Can I use a
Khadas Tone 1 DAC with pCP? It is an ES9038Q2M 32-bit stereo audio DAC
that I would connect to my Raspberry Pi 4 via USB.
I do not see Khadas or Tone 1 or ES9038Q2M on the DAC pull-down lists on
pCP.
I am
