The ports are set up as:
ports:
- 9004:9000/tcp
And you try to access the instance on port 9004?
Please note that the server must run on the same port as you map on the
outside. This is not important for the web UI, but for the players: LMS
would tell the players on which port to get the
Does this mean I need to start again with a fresh download to continue
to receive 8.1 nightlies?
Yes, if you want to have the 8.1.2 nightlies, you'll have to install the
first one manually.
--
Michael
___
Squeezecenter mailing list
philippe_44 wrote:
> Also, if you set player.source log at at least info, you should see a
> log saying "Stopping remote stream upon full buffer when paused". It
> means that the player has been stopped and 1/the stream is seekable
> 2/the position was known.
>
> BTW, is this a Group (from my
Thanks a lot! :cool:
Michael83's Profile: http://forums.slimdevices.com/member.php?userid=70574
View this thread: http://forums.slimdevices.com/showthread.php?t=113672
___
Does this mean I need to start again with a fresh download to continue
to receive 8.1 nightlies?
Sent from my Pixel 3a using Tapatalk
slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609
View
mherger wrote:
> >
> How did you set up the port mapping?
>
The ports are set up as:
ports:
- 9004:9000/tcp
- 9092:9090/tcp
- 3485:3483/tcp
- 3485:3483/udp
mortify's Profile:
mherger wrote:
> > The ports are set up as:
> > ports:
> > - 9004:9000/tcp
>
> And you try to access the instance on port 9004?
>
> Please note that the server must run on the same port as you map on the
> outside. This is not important for the web UI, but for the players: LMS
> would tell
As seen in the attached log, the Networking requests return 200 OK,
while the Player requests return 403 Forbidden. The reason is the way
Player builds it's requests, which is slightly different than
Networking. 'Player adds a port to the Host header if it is anything
What kind of player are
Dear all
may be a silly question. I have an old readynas ultra 2 nas system
running still 7.9.1. Will there be also an 8.x version for this device
?
Best
Michael
mmartins's Profile:
vco1 wrote:
> One thing that's not fully working is the (highly anticpated) change to
> handle multiple files in a cue sheet. This works almost. Which is a lot
> better than "not at all" as it was in 7.9.x. ;-) However, for this
> edge-case scenario, I still see the flac 'source' files in the
>
may be a silly question. I have an old readynas ultra 2 nas system
running still 7.9.1. Will there be also an 8.x version for this device
Unfortunately no. 7.9 is the last version which would run on those
devices. See the announcement for 8.1, where I explained the reasoning.
--
Michael
Is the 8.x UI accessible via https only? I'm getting "secure connection
failed" via https and "the connection was reset" via http. The docker
image in up and it completed a library scan... just no web UI.
mortify's
Is the 8.x UI accessible via https only? I'm getting "secure connection
There's no https for the UI.
failed" via https and "the connection was reset" via http. The docker
image in up and it completed a library scan... just no web UI.
How did you set up the port mapping?
--
Michael
Unfortunately, it will won't find any players. If I start up my 7.9
instance, that will find the players and then so will 8.1.1, but 8.1.1
won't find it by itself. This seems like another port configuration
issue.
ports:
- 9005:9005/tcp
- 9095:9090/tcp
- 3488:3483/tcp
- 3488:3483/udp
So is there any way to get it to work with version 8.1?
Stone Free's Profile: http://forums.slimdevices.com/member.php?userid=31773
View this thread: http://forums.slimdevices.com/showthread.php?t=113400
mherger wrote:
> One case we've seen recently was where a FLAC file had an embedded CUE
> sheet in addition to the .CUE sheet, and they weren't identical. Would
> you mind sharing your files with us to investigate?
>
> --
>
> Michael
I can't share the files unfortunately. It's copyrighted
- 3488:3483/tcp
- 3488:3483/udp
Yes, you can't change these ports. They must be 3483.
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter
Paul Webster wrote:
> Looks like this is indeed how it works ... (X-Amz-SignedHeaders being
> the list of header fields and X-Amz-Signature is the result of their
> pre-signing calculation.
> https://docs.aws.amazon.com/AmazonS3/latest/API/sigv4-query-string-auth.html
>
Good find! This
Regular CUE sheets, i.e. with one file, are working fine now. Although
I'm still curious to know what the requirements are: do filenames matter
(off course the filename in the cue sheet should be equal to the
filename of the flac/m3 file)? What's the logic for not adding files to
the database
bpa wrote:
> My earlier posts were to do with cue files with multiple source files.
> The Nov/Dec LMS problem with Cue files was related to cue files with
> multiple source files - this seems to be similar to the edge case you
> are referring.
> The cue file you posted had only one source
mherger wrote:
> > I recently upgraded to an iMac running Mac OS Catalina and LMS 8.2.
> My
> > media is on an external drive and even though I choose the music
> folder
> > on that drive, LMS does not see any of the music files when I rescan.
> I
> > have tried clearing the cache but it
See my posts here:
https://forums.slimdevices.com/showthread.php?113581-LMS-can-t-select-media-folder-under-macOS-Big-Sur
MrC's Profile: http://forums.slimdevices.com/member.php?userid=468
View this thread:
mherger wrote:
> > Going to http://192.168.1.100:9004 gives me connection reset.
> HTTP_PORT
> > was set to 9004
>
> In this case you'd have to make a 9004:9004 mapping, not 9004:9000.
>
That's it!!! Thank you for your help.
RobbH wrote:
> Please forgive me if I'm wildly off base here. That's not at all
> unlikely. But I think what makes certain multi-source cue files
> non-standard is the addition of a pregap (index 0 command) for each
> track (>1) to the end of the preceding track. Without this quirk,
>
mherger wrote:
>
> What kind of player are you using? I must assume it's not a SB, as that
>
> wouldn't support https.
>
> Would forcing proxied streaming in LMS work?
>
Im using a squeezelite player. And with the Reliable plugin enabled, it
is already forced proxying from what I
This system just gets better and better. Mine runs on my old WHS 2011
on an old Proliant Microserver. I need intel for Sugarcube which I still
use.
Mine updated to 8 automatically, although I did load one of Michael's
manual builds after a crash a couple of years ago, and recovered my
Going to http://192.168.1.100:9004 gives me connection reset. HTTP_PORT
was set to 9004
In this case you'd have to make a 9004:9004 mapping, not 9004:9000.
--
Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
'PR created' (https://github.com/Logitech/slimserver/pull/508). Please
add/criticize/scold on github if you desire!
daveaudi0's Profile: http://forums.slimdevices.com/member.php?userid=71231
View this thread:
No worries.
The bash binary lives in /bin (not /usr/bin). Follow the instructions I
posted in my replies in the thread I mentioned.
Use the LMS panel in System Preferences to Stop / Start the server.
MrC's Profile:
bpa wrote:
> You're probably right. I don't use cue files and the comment about
> "INDEX" makes sense as when I tested the unsupported EAC generated
> variant it had "INDEX" entries.
>
>
Specifically, I think it's the "INDEX 0" (or 00) command that's the
problem, when it's appended to
Hi,
I've been using LMS for a while on my x86 server running Debian 10. It
works great. I use it to stream to various AirPlay and UPnP-compatible
devices around the house.
However, I have the problem that I have m4a and mp4 files in my library
and I would like to play those files, too. I have
MrC wrote:
> No worries.
>
> The bash binary lives in /bin (not /usr/bin). Follow the instructions I
> posted in my replies in the thread I mentioned.
>
> Use the LMS panel in System Preferences to Stop / Start the server.
Thanks. It seems to have worked--the media library statistics went
bpa wrote:
> You're probably right. I don't use cue files and the comment about
> "INDEX" makes sense as when I tested the unsupported EAC generated
> variant it had "INDEX" entries.
>
>
> Isn't the just the audio copyrighted not the CUE text file ?
> Can you not even share the CUE file
Have they been excluded?
Settings/Advanced/File Types
If not - then check LMS server.log to see if there are any clues.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
supla finland, abc australia, cbc/radio-canada and rte
MrC wrote:
> See my posts here:
>
> https://forums.slimdevices.com/showthread.php?113581-LMS-can-t-select-media-folder-under-macOS-Big-Sur
Pardon my ineptitude, although I have been able to locate and allow disk
access for perl and perl5.18, I cannot locate either bash (I do see
bashbug) or
Hello,
Are there any settings for the UPnP/DLNA Media Interface plugin we can
change or any way to customize the DLNA client views?
Here are the folders I can view from my DLNA client (Yamaha Musiccast
app):
32966
My problem is that the Artist view include a lot of "1 or 2
track-artists"
Stone Free wrote:
> So is there any way to get it to work with version 8.1?
If original developer dont plan to update it someone would have to
manually download install it in Plugins directory and possibly modify
the install.xml bundled in the plugin to say maxVersion=* and after this
verify
I'm still working my way through the code, especially cue.pm. Being not
fluent in Perl (to say the least ;-)) and unfamiliar with the inner
workings of LMS altogether, that takes a while. Still, I'm pretty sure
the handling of a cue sheet with multiple files contains a bug. The fact
that the
38 matches
Mail list logo