Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread DJanGo


pavowren wrote: 
> ok, good folks, let me step back and paint a clearer picture.
> 
> Wishlist:
> be able to run both LMS and Roon on NUC.  
> they have been successfully installed but there are
> 
> Issues:
> 1) Roon Bridge and SqueezeLite cannot coexist with the Allo DigiOne
> output device.
> if i stop SqueezeLite, Roon works; otherwise, it does not see it.
> 2) forgetting Roon for a moment, LMS has problems getting to
> mysqueeze.com.
> Firefox has no problems going anywhere including mysqueeze.com.
> i've installed linux packages from the terminal without any problems.
> so, i know the internet access via wifi works.
> it would seem LMS is the only guy with issues.
> 
> i have pursued the network interface metric angle without success so
> far.
> any more ideas for me to try will be most welcome...

1) Run squeezelite on the lms not the Pi
2) Show your network config from both devices



DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] transferring to new machine

2019-02-27 Thread Michael Herger

Does anyone know of an easy way to transfer a LMS setup to an new
machine without having to manually do the lot again? Is there a way to
export and re-import?


There's no tool I'm aware of. But you can copy the configuration to a 
certain degree: it's all in the prefs folder (see Settings/Information) 
and its plugin sub-folder. You'll just have to make sure to get rid of 
all paths in those files, and the server_uuid in server.prefs.


--

Michael
___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


[SlimDevices: SqueezeCenter] Synchronization and power on

2019-02-27 Thread Fahzz


Running a wired Allo Digione Pi with Max2Play as my main player, and a
boom upstairs. They sync fine when playing. My issue is that when I
start up, the Boom powers on by default, but the Max2Play unit does not.
I want it the other way around. They are set to be powered on and off
separately.
How do I get the Max2Play to power up by default?



Living Room: Pi3 w/Allo Digione Player (Wired), Max2Play w/LMS Server
7.9 and SqueezeLite
Pioneer Elite VSX 80, Parasound 2125 v2
KEF LS50's, Paradigm SE Center, SVS SB12-NSD Subwoofer, Paradigm Atom
v.5 Surrounds
Harmony Smart Control w/Hub and iPeng
Dining Room: KEF Q100's
Bedroom: Logitech Boom
Porch: Boston Acoustics Voyager Metro II
Router: Asus RT-N56U

Fahzz's Profile: http://forums.slimdevices.com/member.php?userid=12585
View this thread: http://forums.slimdevices.com/showthread.php?t=110243

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


[SlimDevices: SqueezeCenter] transferring to new machine

2019-02-27 Thread s2kiwi


Hi guys,

For ages I've been meaning to move from windows to Linux, but I've been
putting it off as re-setting up everything from scratch (plugins,
settings, sync timings etc) all seems a bit of a hassle.

Does anyone know of an easy way to transfer a LMS setup to an new
machine without having to manually do the lot again? Is there a way to
export and re-import?

Thanks.



s2kiwi's Profile: http://forums.slimdevices.com/member.php?userid=63950
View this thread: http://forums.slimdevices.com/showthread.php?t=110241

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Problems with http://lms:9000/stream.mp3

2019-02-27 Thread d6jg

I think you do need SB Player or similar. I haven’t used it for ages but
pretty sure you can tell it where your LMS server is (ip) and use the
vpn to connect.
Is there a bandwidth limiter ? Not sure.

All I can say is that I can use iPeng on iOS with a VPN and set the
bandwidth to MP3 level and can listen when I’m away



VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3
-> Onkyo CRN755 -> Wharfedale Modus Cubes
*Dining Room* -> SB Boom 
*Kitchen* -> UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones
*Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s
Everything controlled by iPeng

d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051
View this thread: http://forums.slimdevices.com/showthread.php?t=110237

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Problems with http://lms:9000/stream.mp3

2019-02-27 Thread mr-b


Tx - guess that explains why it seemed very laggy!

I'd not bought the native SB player since it would be streaming from my
FLAC library and my requirements are for something more lightweight.
For the background, see my other post
https://forums.slimdevices.com/showthread.php?110240-Easy-remote-access-to-LMS-from-Android-phone.



mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=110237

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Problems with http://lms:9000/stream.mp3

2019-02-27 Thread bpa


mr-b wrote: 
> Is this playback method still supported?
I tried it not too long ago and it work ok but but is really only a
internet radio type facility with basic metadata.  Using standard stream
mp3 players have large buffer so timing etc. will be out.



bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this thread: http://forums.slimdevices.com/showthread.php?t=110237

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread bpa


pavowren wrote: 
> yes, for radio, it does require local wifi on RPi as you pointed out
> before.

No it doesn't require wifi just proper setup where AFAICT the NUC is
setup as a router (I.e. it is has two network connection) and routes
packets from RPi to internet but as d6jg points out this requires a
proper network design.



bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Problems with http://lms:9000/stream.mp3

2019-02-27 Thread d6jg

Why not use SB Player on Android coupled with Material skin. SB Player
is a few £



VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3
-> Onkyo CRN755 -> Wharfedale Modus Cubes
*Dining Room* -> SB Boom 
*Kitchen* -> UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones
*Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s
Everything controlled by iPeng

d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051
View this thread: http://forums.slimdevices.com/showthread.php?t=110237

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Double Scrobbles

2019-02-27 Thread d6jg


Group Player plugin? Synchronised Players?



VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3
-> Onkyo CRN755 -> Wharfedale Modus Cubes
*Dining Room* -> SB Boom 
*Kitchen* -> UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones
*Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s
Everything controlled by iPeng

d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051
View this thread: http://forums.slimdevices.com/showthread.php?t=110238

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread d6jg

pavowren wrote: 
> well, networking sometimes works or not works in mysterious ways!
> first the good news:
> i was finally able to install Spotty; for whatever reason, it would
> simply not stick.
> i enable it on the plugin page and click to restart LMS, but it would
> come right back unchecked but now, at the top of the page.
> this went on all morning until just now.  
> anyway, i can now stream Spotify (with no stuttering) from LMS with/out
> wifi enabled on RPi.
> yes, for radio, it does require local wifi on RPi as you pointed out
> before.
> 
> bad news:
> i need the hotspot for internet radio; was hoping to locate it in just
> one place, near LMS.
> so, what exactly did i do to make it work?
> i really don't know.
> 
> i did change the metric (using ifmetric) for ethernet interface greater
> than wlan but
> that made things much worse.  i couldn't browse the net nor could i
> connect to NUCi over LAN.
> so i undid the change and now, the routing table looks like this:
> 
> groundie@NUCi:~$ route
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric RefUse
> Iface
> default _gateway0.0.0.0 UG60000
> wlp0s20f3
> link-local  0.0.0.0 255.255.0.0 U 1000   00
> eno1
> 192.168.1.0 0.0.0.0 255.255.255.0   U 10000
> eno1
> 192.168.43.00.0.0.0 255.255.255.0   U 60000
> wlp0s20f3
> 
> and somehow, it all works.
> being an ex-engineer, i wish i understood why.
> perhaps you have an explanation...
> 
> n.b. as for the sim card, it is not a data-sim.  it is in the phone and
> i certainly do not want to mess with it at this point.

Networking always work as long as you use the correct kit and keep the
design simple. I am afraid you are doing neither.
Effectively you are trying to save the price of a data SIM card and
appropriate router by picking our brains for ideas but without initially
telling us the whole picture.
The problem is nothing to do with LMS it’s entirely a networking issue.

LMS (and probably Roon) requires a working network.
Without spending some money you are constantly going to run into these
sort of issues.
The acronym KISS really does apply to networking.



VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3
-> Onkyo CRN755 -> Wharfedale Modus Cubes
*Dining Room* -> SB Boom 
*Kitchen* -> UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones
*Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s
Everything controlled by iPeng

d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread pavowren


d6jg wrote: 
> I assume your SIM is actually in a mobile phone then?
> If so simplify the network
> Move the SIM card into a Wireless Dongle and connect that to the WAN
> port of the Linksys or get a Router that will take a SIM card as its WAN
> interface.
> Your problem is routing related. Stuff that you want to go over the WiFi
> is going over the LAN.

well, networking sometimes works or not works in mysterious ways!
first the good news:
i was finally able to install Spotty; for whatever reason, it would
simply not stick.
i enable it on the plugin page and click to restart LMS, but it would
come right back unchecked but now, at the top of the page.
this went on all morning until just now.  
anyway, i can now stream Spotify (with no stuttering) from LMS with/out
wifi enabled on RPi.
yes, for radio, it does require local wifi on RPi as you pointed out
before.

bad news:
i need the hotspot for internet radio; was hoping to locate it in just
one place, near LMS.
so, what exactly did i do to make it work?
i really don't know.

i did change the metric (using ifmetric) for ethernet interface greater
than wlan but
that made things much worse.  i couldn't browse the net nor could i
connect to NUCi over LAN.
so i undid the change and now, the routing table looks like this:

groundie@NUCi:~$ route
Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse
Iface
default _gateway0.0.0.0 UG60000
wlp0s20f3
link-local  0.0.0.0 255.255.0.0 U 1000   00
eno1
192.168.1.0 0.0.0.0 255.255.255.0   U 10000
eno1
192.168.43.00.0.0.0 255.255.255.0   U 60000
wlp0s20f3

and somehow, it all works.
being an ex-engineer, i wish i understood why.
perhaps you have an explanation...

n.b. as for the sim card, it is not a data-sim.  it is in the phone and
i certainly do not want to mess with it at this point.



pavowren's Profile: http://forums.slimdevices.com/member.php?userid=51958
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2019-02-27 Thread dolodobendan


digimaster wrote: 
> Yep that not the way. It has to run in chroot. Google Linux chroot.

Not sure if it's better this time:


Code:


  [\u@\h \W]$ ./slimserver.pl --help
  Your locale was detected as C, you may have problems with non-Latin 
filenames.  Consider changing your LANG variable to the correct locale, i.e. 
en_US.utf8
  Usage: ./slimserver.pl [--diag] [--daemon] [--stdio]
  [--logdir ]
  [--logfile ]
  [--user ]
  [--group ]
  [--httpport  [--httpaddr ]]
  [--cliport  [--cliaddr ]]
  [--priority ]
  [--prefsdir  [--pidfile ]]
  [--perfmon] [--perfwarn= | --perfwarn ]
  [--checkstrings] [--charset ]
  [--noweb] [--notranscoding] [--nosb1slimp3sync] [--nostatistics] [--norestart]
  [--noimage] [--novideo] [--nobrowsecache]
  [--logging ] [--noinfolog | --nodebuglog]
  [--localfile]
  
  --help   => Show this usage information.
  --cachedir   => Directory for Logitech Media Server to save cached music 
and web data
  --diag   => Use diagnostics, shows more verbose errors.
  Also slows down library processing considerably
  --logdir => Specify folder location for log file
  --logfile=> Specify a file for error logging.  Specify 'syslog' to 
log to syslog.
  --daemon => Run the server in the background.
  This may only work on Unix-like systems.
  --stdio  => Use standard in and out as a command line interface 
  to the server
  --user   => Specify the user that server should run as.
  Only usable if server is started as root.
  This may only work on Unix-like systems.
  --group  => Specify the group that server should run as.
  Only usable if server is started as root.
  This may only work on Unix-like systems.
  --httpport   => Activate the web interface on the specified port.
  Set to 0 in order disable the web server.
  --httpaddr   => Activate the web interface on the specified IP address.
  --cliport=> Activate the command line interface TCP/IP interface
  on the specified port. Set to 0 in order disable the 
  command line interface server.
  --cliaddr=> Activate the command line interface TCP/IP 
  interface on the specified IP address.
  --prefsdir   => Specify the location of the preferences directory
  --pidfile=> Specify where a process ID file should be stored
  --quiet  => Minimize the amount of text output
  --playeraddr => Specify the _server's_ IP address to use to connect 
  to Slim players
  --priority   => set process priority from -20 (high) to 20 (low)
  --streamaddr => Specify the _server's_ IP address to use to connect
  to streaming audio sources
  --nodebuglog => Disable all debug-level logging (compiled out).
  --noinfolog  => Disable all debug-level & info-level logging (compiled 
out).
  --norestart  => Disable automatic restarts of server (if performed by 
external script) 
  --nosetup=> Disable setup via http.
  --noserver   => Disable web access server settings, but leave player 
settings accessible.
  Settings changes are not preserved.
  --noweb  => Disable web interface. JSON-RPC, Comet, and artwork web 
APIs are still enabled.
  --nosb1slimp3sync=> Disable support for SliMP3s, SB1s and associated 
synchronization
  --nostatistics   => Disable the TracksPersistent table used to keep to 
statistics across rescans (compiled out).
  --notranscoding  => Disable transcoding support.
  --noimage=> Disable scanning for images.
  --novideo=> Disable scanning for videos.
  --nomysqueezebox => Disable mysqueezebox.com integration.
  Warning: This effectively disables all music services provided by Logitech 
apps.
  --nobrowsecache  => Disable caching of rendered browse pages.
  --perfmon=> Enable internal server performance monitoring
  --perfwarn   => Generate log messages if internal tasks take longer than 
specified threshold
  --failsafe   => Don't load plugins
  --checkstrings   => Enable reloading of changed string files for plugin 
development
  --charset=> Force a character set to be used, eg. utf8 on Linux 
devices
  which don't have full utf8 locale installed
  --dbtype => Force database type (valid values are MySQL or SQLite)
  --logging=> Enable logging for the specified comma separated 
categories
  --localfile  => Enable LocalFile protocol handling for locally connected 
squeezelite service
  
  Commands may be sent to the server through standard in and will be echoed via
  standard out.  See complete documentation for details on the command syntax.
  




QLMS 7.9.2@2.03.31 x64 (digimaster) with perl 5.28 dedicated to me. :D /
QNAP 469L QTS 4.3.4

dolodobendan's Profile: http://forums.slimdevices.com/member.php?userid=67663
View this thread: http://forums.slimdevices.com/showthread.php?t=108702


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2019-02-27 Thread digimaster


dolodobendan wrote: 
> I'm not very good with linux, but this is what I got:
> 
> > 
Code:

  >   > SlimServer$ ./slimserver.pl --help
  > 
  > bash: ./slimserver.pl: /usr/bin/perl: bad interpreter: No such file or 
directory
  > 

> > Yep that not the way. It has to run in chroot. Google Linux chroot. 

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2019-02-27 Thread dolodobendan


digimaster wrote: 
> The message if as is, when you do SlimServer.pl  --help. 
> 
> Send from my mobile Phone

I'm not very good with linux, but this is what I got:


Code:

SlimServer$ ./slimserver.pl --help
  
  bash: ./slimserver.pl: /usr/bin/perl: bad interpreter: No such file or 
directory
  




QLMS 7.9.2@2.03.31 x64 (digimaster) with perl 5.28 dedicated to me. :D /
QNAP 469L QTS 4.3.4

dolodobendan's Profile: http://forums.slimdevices.com/member.php?userid=67663
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


[SlimDevices: SqueezeCenter] Double Scrobbles

2019-02-27 Thread SlimPvC


I don't know what has changed, but recently I found out that all tracks
I play via LMS / Squeezebox Touch are scrobbled twice on last.fm. This
was not the case earlier. 

On searching online, I only found references to double scrobbles in
Spotify, but this does not concern spotify plays, these are streamed
from a local collection. 
(I have Spotty plugin installed but there are no last.fm settings in
there)

I have upgraded to the last LMS version, 7.9.2, and re-installed the
last.fm plugin, but unfortunately this does not help. 

There are only two places to activate scrobbling in LMS: in the plugin
settings and for eacht individual player. I have no clue where to look
for the solution for this. 

Would appreciate any help!



SlimPvC's Profile: http://forums.slimdevices.com/member.php?userid=51
View this thread: http://forums.slimdevices.com/showthread.php?t=110238

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2019-02-27 Thread digimaster


dolodobendan wrote: 
> Same error (and some more) with PERL=1 and perl 5.024:
> 
> > 
Code:

  >   > 
  > [19-02-27 17:09:18.5490] main::init (387) Starting Logitech Media Server 
(v7.9.2, 1550612824, Tue Feb 19 23:22:28 CET 2019) perl 5.024004 - 
x86_64-linux-thread-multi
  > [19-02-27 17:09:22.1330] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuesort.sql
 : No such file or directory
  > [19-02-27 17:09:22.1341] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_extravalue.sql
 : No such file or directory
  > [19-02-27 17:09:22.1352] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuetype.sql
 : No such file or directory
  > [19-02-27 17:09:41.5304] Slim::Control::Request::renderAsArray (2233) 
Error: request should set useIxHashes in Slim::Control::Request->new()
  > [19-02-27 17:09:41.5534] Slim::Control::Request::renderAsArray (2233) 
Backtrace:
  > 
  > frame 0: Slim::Utils::Log::logBacktrace 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2233)
  > frame 1: Slim::Control::Request::renderAsArray 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Plugin/CLI/Plugin.pm
 line 697)
  > frame 2: Slim::Plugin::CLI::Plugin::cli_request_write 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Plugin/CLI/Plugin.pm
 line 1010)
  > frame 3: Slim::Plugin::CLI::Plugin::cli_subscribe_notification 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2058)
  > frame 4: (eval) 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2058)
  > frame 5: Slim::Control::Request::notify 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 859)
  > frame 6: Slim::Control::Request::checkNotifications 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
708)
  > frame 7: main::idle 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
677)
  > frame 8: main::main 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
1213)
  > 
  > [19-02-27 17:09:41.5930] Slim::Control::Request::renderAsArray (2233) 
Error: request should set useIxHashes in Slim::Control::Request->new()
  > [19-02-27 17:09:41.5939] Slim::Control::Request::renderAsArray (2233) 
Backtrace:
  > 
  > frame 0: Slim::Utils::Log::logBacktrace 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2233)
  > frame 1: Slim::Control::Request::renderAsArray 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Plugin/CLI/Plugin.pm
 line 697)
  > frame 2: Slim::Plugin::CLI::Plugin::cli_request_write 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Plugin/CLI/Plugin.pm
 line 1010)
  > frame 3: Slim::Plugin::CLI::Plugin::cli_subscribe_notification 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2058)
  > frame 4: (eval) 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2058)
  > frame 5: Slim::Control::Request::notify 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 859)
  > frame 6: Slim::Control::Request::checkNotifications 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
708)
  > frame 7: main::idle 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
677)
  > frame 8: main::main 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
1213)
  > 
  > [19-02-27 17:10:41.0526] Slim::Networking::IO::Select::__ANON__ (131) 
Error: Select task failed calling 
Slim::Networking::Async::HTTP::_http_read_body: Error in tempfile() using 
/XX: Parent directory (/) is not writable
  > at 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Utils/Scanner/Remote.pm
 line 716.
  > ; fh=Slim::Networking::Async::Socket::HTTP=GLOB(0x7fd84364ddb0)
  > [19-02-27 17:10:41.0566] Slim::Networking::IO::Select::__ANON__ (131) 
Error: Select task failed calling 
Slim::Networking::Async::HTTP::_http_read_body: Error in tempfile() using 
/XX: Parent directory (/) is not writable
  > at 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Utils/Scanner/Remote.pm
 line 716.
  > ; fh=Slim::Networking::Async::Socket::HTTP=GLOB(0x7fd84364ddb0)
  > [19-02-27 17:10:41.0583] Slim::Networking::IO::Select::__ANON__ (131) 
Error: Select task failed calling 

Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread pavowren


d6jg wrote: 
> Are you actually saying that your Pi was connected to your NUC by LAN
> cable and not originally by WiFi and that the NUC had both WiFi (to the
> Hotspot) and LAN to the Pi?
> If so then the NUC was probably sending its internet packets via the LAN
> cable - the fastest connection.
> You need to explain more about your networking setup.

ok, good folks, let me step back and paint a clearer picture.

OLD setup:
little RPi had everything on it; LMS, music on usb stick, SqueezeLite,
Jivelite, the works.
and it worked fine for a while. then, it started acting up in various
ways, e.g., LMS just stops playing, volume drops, hdmi display became
non-touch, etc.
so i decided to trim it all the way since i was buying a brand new Intel
NUCi7 kit.

NEW setup:
LMS runs on the new NUC with music on a SSD.
RPi runs squeezelite and jivelite.

Network-wise:
RPi and NUC are on the same LAN with a Linksys router (NO internet, i
cut the cord to Windstream).
RPi has no wifi now.
NUC has wifi connection to the mobile hotspot (T-Mobile) averaging now
about 0.6 Mbps (normally up to 20 Mbps) after using up my monthly
bucket. 

Wishlist:
be able to run both LMS and Roon on NUC.  
they have been successfully installed but there are

Issues:
1) Roon Bridge and SqueezeLite cannot coexist with the Allo DigiOne
output device.
if i stop SqueezeLite, Roon works; otherwise, it does not see it.
2) forgetting Roon for a moment, LMS has problems getting to
mysqueeze.com.
Firefox has no problems going anywhere including mysqueeze.com.
i've installed linux packages from the terminal without any problems.
so, i know the internet access via wifi works.
it would seem LMS is the only guy with issues.

i have pursued the network interface metric angle without success so
far.
any more ideas for me to try will be most welcome...



pavowren's Profile: http://forums.slimdevices.com/member.php?userid=51958
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2019-02-27 Thread dolodobendan


Same error (and some more) with PERL=1 and perl 5.024:


Code:


  [19-02-27 17:09:18.5490] main::init (387) Starting Logitech Media Server 
(v7.9.2, 1550612824, Tue Feb 19 23:22:28 CET 2019) perl 5.024004 - 
x86_64-linux-thread-multi
  [19-02-27 17:09:22.1330] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuesort.sql
 : No such file or directory
  [19-02-27 17:09:22.1341] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_extravalue.sql
 : No such file or directory
  [19-02-27 17:09:22.1352] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuetype.sql
 : No such file or directory
  [19-02-27 17:09:41.5304] Slim::Control::Request::renderAsArray (2233) Error: 
request should set useIxHashes in Slim::Control::Request->new()
  [19-02-27 17:09:41.5534] Slim::Control::Request::renderAsArray (2233) 
Backtrace:
  
  frame 0: Slim::Utils::Log::logBacktrace 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2233)
  frame 1: Slim::Control::Request::renderAsArray 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Plugin/CLI/Plugin.pm
 line 697)
  frame 2: Slim::Plugin::CLI::Plugin::cli_request_write 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Plugin/CLI/Plugin.pm
 line 1010)
  frame 3: Slim::Plugin::CLI::Plugin::cli_subscribe_notification 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2058)
  frame 4: (eval) 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2058)
  frame 5: Slim::Control::Request::notify 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 859)
  frame 6: Slim::Control::Request::checkNotifications 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
708)
  frame 7: main::idle 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
677)
  frame 8: main::main 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
1213)
  
  [19-02-27 17:09:41.5930] Slim::Control::Request::renderAsArray (2233) Error: 
request should set useIxHashes in Slim::Control::Request->new()
  [19-02-27 17:09:41.5939] Slim::Control::Request::renderAsArray (2233) 
Backtrace:
  
  frame 0: Slim::Utils::Log::logBacktrace 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2233)
  frame 1: Slim::Control::Request::renderAsArray 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Plugin/CLI/Plugin.pm
 line 697)
  frame 2: Slim::Plugin::CLI::Plugin::cli_request_write 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Plugin/CLI/Plugin.pm
 line 1010)
  frame 3: Slim::Plugin::CLI::Plugin::cli_subscribe_notification 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2058)
  frame 4: (eval) 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 2058)
  frame 5: Slim::Control::Request::notify 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Control/Request.pm
 line 859)
  frame 6: Slim::Control::Request::checkNotifications 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
708)
  frame 7: main::idle 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
677)
  frame 8: main::main 
(/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/slimserver.pl line 
1213)
  
  [19-02-27 17:10:41.0526] Slim::Networking::IO::Select::__ANON__ (131) Error: 
Select task failed calling Slim::Networking::Async::HTTP::_http_read_body: 
Error in tempfile() using /XX: Parent directory (/) is not writable
  at 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Utils/Scanner/Remote.pm
 line 716.
  ; fh=Slim::Networking::Async::Socket::HTTP=GLOB(0x7fd84364ddb0)
  [19-02-27 17:10:41.0566] Slim::Networking::IO::Select::__ANON__ (131) Error: 
Select task failed calling Slim::Networking::Async::HTTP::_http_read_body: 
Error in tempfile() using /XX: Parent directory (/) is not writable
  at 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Utils/Scanner/Remote.pm
 line 716.
  ; fh=Slim::Networking::Async::Socket::HTTP=GLOB(0x7fd84364ddb0)
  [19-02-27 17:10:41.0583] Slim::Networking::IO::Select::__ANON__ (131) Error: 
Select task failed calling Slim::Networking::Async::HTTP::_http_read_body: 
Error in tempfile() using /XX: Parent directory (/) is not writable
  at 

[SlimDevices: SqueezeCenter] Problems with http://lms:9000/stream.mp3

2019-02-27 Thread mr-b


I've not used this method for ages but wanted a quick method of using my
android phone as a player.
In a browser or Foobar it connects and I can select it as a player in
LMS (Mozilla from [ip address]) but it only plays for a few seconds,
then stops.

If I try from a PC it says connection reset.
I then tried from my tablet and music starts playing after a few minutes
but the progress bar jumps around and is generally erratic.

Is this playback method still supported?



mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=110237

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2019-02-27 Thread dolodobendan


digimaster wrote: 
> It's inside the SlimServer/ so I don't know about this. But maybe
> related to perl 5.28, you could try the touch .PERL. To switch to 5.24
> to test, if same happens. 
> 
> Send from my mobile Phone

I will try it, ok. But ~.31 also uses perl 5.28, and there are no
problems.



QLMS 7.9.2@2.03.31 x64 (digimaster) with perl 5.28 dedicated to me. :D /
QNAP 469L QTS 4.3.4

dolodobendan's Profile: http://forums.slimdevices.com/member.php?userid=67663
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2019-02-27 Thread digimaster


dolodobendan wrote: 
> Same problem as before:
> 
> > 
Code:

  >   > 
  > *[19-02-25 02:00:40.0778] main::init (387) Starting Logitech Media Server 
(v7.9.2, 1550612824, Tue Feb 19 23:22:28 CET 2019) perl 5.028001 - 
x86_64-linux-thread-multi <- That's 2.03.31*
  > [19-02-25 02:00:42.4546] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuesort.sql
 : No such file or directory
  > [19-02-25 02:00:42.4556] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_extravalue.sql
 : No such file or directory
  > [19-02-25 02:00:42.4566] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuetype.sql
 : No such file or directory
  > [19-02-25 15:12:09.1404] Slim::Utils::Scanner::Remote::__ANON__ (193) 
Error: Can't connect to remote server to retrieve playlist for, 
http://streams.radiobob.de/bob-live/aac-48/tunein/play.m3u: 501 Not Implemented.
  > [19-02-25 15:12:52.8514] Slim::Utils::Scanner::Remote::__ANON__ (193) 
Error: Can't connect to remote server to retrieve playlist for, 
http://streams.radiobob.de/bob-live/aac-48/tunein/play.m3u: 501 Not Implemented.
  > [19-02-25 15:13:57.2113] Slim::Utils::Scanner::Remote::__ANON__ (193) 
Error: Can't connect to remote server to retrieve playlist for, 
http://streams.radiobob.de/bob-live/aac-48/tunein/play.m3u: 501 Not Implemented.
  > [19-02-26 20:14:10.7477] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-26 20:14:10.7612] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-26 20:14:10.7703] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-26 20:14:10.7825] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-26 20:14:20.7651] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-26 20:14:30.7699] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-27 05:27:39.6823] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-27 05:27:39.6864] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-27 05:27:39.6906] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-27 05:27:41.4705] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-27 05:42:22.6786] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-27 05:42:22.7067] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > [19-02-27 05:42:22.7164] Slim::Web::JSONRPC::requestMethod (486) 
squeezelitexmac: request not dispatchable!
  > *[19-02-27 15:54:18.2342] main::init (387) Starting Logitech Media Server 
(v7.9.2, 1550612824, Tue Feb 19 23:22:28 CET 2019) perl 5.028001 - 
x86_64-linux-thread-multi <- That's 2.03.40* 
  > [19-02-27 15:54:21.7187] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuesort.sql
 : No such file or directory
  > [19-02-27 15:54:21.7197] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_extravalue.sql
 : No such file or directory
  > [19-02-27 15:54:21.7207] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuetype.sql
 : No such file or directory
  > [19-02-27 16:01:09.3018] Slim::Networking::IO::Select::__ANON__ (131) 
Error: Select task failed calling 
Slim::Networking::Async::HTTP::_http_read_body: Error in tempfile() using 
/XX: Parent directory (/) is not writable
  > at 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Utils/Scanner/Remote.pm
 line 667.
  > ; fh=Slim::Networking::Async::Socket::HTTP=GLOB(0x7f3488472ac8)
  > [19-02-27 16:01:17.8070] Slim::Networking::IO::Select::__ANON__ (131) 
Error: Select task failed calling 
Slim::Networking::Async::HTTP::_http_read_body: Error in tempfile() using 
/XX: Parent directory (/) is not writable
  > at 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Utils/Scanner/Remote.pm
 line 667.
  > ; 

Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread d6jg


pavowren wrote: 
> well, you are absolutely correct about RPi streaming radio directly, not
> via LMS.
> i re-enabled wifi and RPi has no problems playing internet radio!
> 
> however, if only i can get Spotty to install on LMS, i can test Spotify
> which i'm assuming (confidently?) will be streamed by LMS.
> 
> thank you for your note!

Are you actually saying that your Pi was connected to your NUC by LAN
cable and not originally by WiFi and that the NUC had both WiFi (to the
Hotspot) and LAN to the Pi?
If so then the NUC was probably sending its internet packets via the LAN
cable - the fastest connection.
You need to explain more about your networking setup.



VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3
-> Onkyo CRN755 -> Wharfedale Modus Cubes
*Dining Room* -> SB Boom 
*Kitchen* -> UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones
*Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s
Everything controlled by iPeng

d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread Paul Webster


I think, if you had enabled Proxied Streaming in LMS for this player and
the remote player had started to work when trying to play internet radio
then it would have indicated that internet access from the LMS machine
was working fine and that the problem was internet access from the
player machine (and you would have sidestepped the issue ... allowing
you to listen while researching further at a lower priority).

Seems odd that reenabling (disabling and then enabling?) WiFi on the RPi
player made it work given that clearly Wi-fi was working on it already
(since you were able to SSH into it etc).
So perhaps there was/is some sort of timing issue with the RPi somehow
not picking up the gateway address or DNS server address via DHCP.
ifconfig when it stops working next time might help in diagnosis.

On the LMS machine ... have you tried restarting LMS long after the
reboot completes?



Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin

Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] QLogitechMediaServer for Qnap with QTS 4.2 or higher and x86_64/I686/X86 support !

2019-02-27 Thread dolodobendan


Same problem as before:


Code:


  [19-02-25 02:00:40.0778] main::init (387) Starting Logitech Media Server 
(v7.9.2, 1550612824, Tue Feb 19 23:22:28 CET 2019) perl 5.028001 - 
x86_64-linux-thread-multi
  [19-02-25 02:00:42.4546] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuesort.sql
 : No such file or directory
  [19-02-25 02:00:42.4556] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_extravalue.sql
 : No such file or directory
  [19-02-25 02:00:42.4566] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuetype.sql
 : No such file or directory
  [19-02-25 15:12:09.1404] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: 
Can't connect to remote server to retrieve playlist for, 
http://streams.radiobob.de/bob-live/aac-48/tunein/play.m3u: 501 Not Implemented.
  [19-02-25 15:12:52.8514] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: 
Can't connect to remote server to retrieve playlist for, 
http://streams.radiobob.de/bob-live/aac-48/tunein/play.m3u: 501 Not Implemented.
  [19-02-25 15:13:57.2113] Slim::Utils::Scanner::Remote::__ANON__ (193) Error: 
Can't connect to remote server to retrieve playlist for, 
http://streams.radiobob.de/bob-live/aac-48/tunein/play.m3u: 501 Not Implemented.
  [19-02-26 20:14:10.7477] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-26 20:14:10.7612] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-26 20:14:10.7703] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-26 20:14:10.7825] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-26 20:14:20.7651] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-26 20:14:30.7699] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-27 05:27:39.6823] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-27 05:27:39.6864] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-27 05:27:39.6906] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-27 05:27:41.4705] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-27 05:42:22.6786] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-27 05:42:22.7067] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  [19-02-27 05:42:22.7164] Slim::Web::JSONRPC::requestMethod (486) 
couldbemyphonesmac: request not dispatchable!
  *[19-02-27 15:54:18.2342] main::init (387) Starting Logitech Media Server 
(v7.9.2, 1550612824, Tue Feb 19 23:22:28 CET 2019) perl 5.028001 - 
x86_64-linux-thread-multi <- That's 2.03.40* 
  [19-02-27 15:54:21.7187] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuesort.sql
 : No such file or directory
  [19-02-27 15:54:21.7197] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_extravalue.sql
 : No such file or directory
  [19-02-27 15:54:21.7207] Plugins::CustomScan::Scanner::executeSQLFile (522) 
Couldn't open: 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Cache/InstalledPlugins/Plugins/CustomScan/SQL/SQLite/dbupgrade_valuetype.sql
 : No such file or directory
  [19-02-27 16:01:09.3018] Slim::Networking::IO::Select::__ANON__ (131) Error: 
Select task failed calling Slim::Networking::Async::HTTP::_http_read_body: 
Error in tempfile() using /XX: Parent directory (/) is not writable
  at 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Utils/Scanner/Remote.pm
 line 667.
  ; fh=Slim::Networking::Async::Socket::HTTP=GLOB(0x7f3488472ac8)
  [19-02-27 16:01:17.8070] Slim::Networking::IO::Select::__ANON__ (131) Error: 
Select task failed calling Slim::Networking::Async::HTTP::_http_read_body: 
Error in tempfile() using /XX: Parent directory (/) is not writable
  at 
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/Slim/Utils/Scanner/Remote.pm
 line 667.
  ; fh=Slim::Networking::Async::Socket::HTTP=GLOB(0x7f3488481890)
  [19-02-27 16:01:19.9097] Slim::Utils::Scanner::Remote::__ANON__ 

Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread pavowren


bpa wrote: 
> What is the IP gateway address set on the RPI ?
> What is the IP gateway address set on the NUC ?
> 
> Internet radio will play directly from a player and not through LMS - if
> Rpi cannot access internet - internet streams won't play but yet will be
> able to communicate with other devices onLAN.
> 
> LMS WebUI timer is often irrelevant - it is not synced to player
> progress at start.

well, you are absolutely correct about RPi streaming radio directly, not
via LMS.
i re-enabled wifi and RPi has no problems playing internet radio!

however, if only i can get Spotty to install on LMS, i can test Spotify
which i'm assuming (confidently?) will be streamed by LMS.

thank you for your note!



pavowren's Profile: http://forums.slimdevices.com/member.php?userid=51958
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2019-02-27 Thread JaMo


digimaster wrote: 
> You could try doing touch .Perl in .qpkg/LogitechMediaServer directory.
> Then it will use Perl 5.24 and not 5.28.
> Remember to do a restart after this. Perl 5.28 is new, could case this
> issue. 
> 
> Send from my mobile Phone

I will do. Thanks again for the work.
/Jan



JaMo's Profile: http://forums.slimdevices.com/member.php?userid=56386
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2019-02-27 Thread digimaster


JaMo wrote: 
> Hi Digimaster, 
> 
> I have now tested the 2.03.40 and the remote playing of DSD files works
> with it but playing of Radio Paradise AAC 320/128 still doesn't work.
> 
> I reverted back again to .25 again.
> 
> /JanYou could try doing touch .Perl in .qpkg/LogitechMediaServer directory.
Then it will use Perl 5.24 and not 5.28.

Send from my mobile Phone



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 7.9.2 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*

digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2019-02-27 Thread JaMo


digimaster wrote: 
> Should be fixed in version 2.03.40.
> Please test it, and let me know ?

Hi Digimaster, 

I have now tested the 2.03.40 and the remote playing of DSD files works
with it but playing of Radio Paradise AAC 320/128 still doesn't work.

I reverted back again to .25 again.

/Jan



JaMo's Profile: http://forums.slimdevices.com/member.php?userid=56386
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread d6jg


pavowren wrote: 
> player is set for "Direct Streaming" as it should be.
> both the RPi (squeezelite) and NUC (LMS) are connected to the same LAN,
> so of course, local music playback is fine.
> it's just the internet streaming that's the issue.
> when playing a radio station, sqzlite shows "Connecting..." 
> 
> problem i believe lies in networking.
> here's the server log for this morning right after powering on:
> 
> 
> 2019-02-27 06:22:41 squeezeboxserver_safe started.
> [19-02-27 06:22:42.4184] main::init (387) Starting Logitech Media Server
> (v7.9.1, 1522157629, Fri Mar 30 12:25:29 CEST 2018) perl 5.026002 -
> x86_64-linux-gnu-thread-multi
> [19-02-27 06:22:42.5335] Slim::Utils::IPDetect::_init (140) Warning:
> Couldn't call connect() - falling back to 127.0.0.1
> [19-02-27 06:22:42.7006] Slim::Formats::XML::gotErrorViaHTTP (339)
> Error: getting http://www.mysqueezebox.com/api/sounds/v1/opml
> Couldn't resolve IP address for: www.mysqueezebox.com
> [19-02-27 06:22:42.7007] Slim::Plugin::Sounds::Plugin::_gotSoundsError
> (83) Error: Unable to cache Sounds & Effects menu from SN: Couldn't
> resolve IP address for: www.mysqueezebox.com
> [19-02-27 06:22:42.7221] Slim::Formats::XML::gotErrorViaHTTP (339)
> Error: getting http://opml.radiotime.com/Index.aspx?partnerId=16
> Couldn't resolve IP address for: opml.radiotime.com
> [19-02-27 06:22:42.7222]
> Slim::Plugin::InternetRadio::Plugin::_gotRadioError (67) Unable to
> retrieve radio directory from SN: Couldn't resolve IP address for:
> opml.radiotime.com
> [19-02-27 06:22:42.7223] Slim::Networking::SqueezeNetwork::_error (565)
> Unable to login to SN: Couldn't resolve IP address for:
> www.mysqueezebox.com
> [19-02-27 06:22:42.7224] Slim::Networking::SqueezeNetwork::_init_error
> (185) Unable to login to mysqueezebox.com, sync is disabled:Couldn't
> resolve IP address for: www.mysqueezebox.com
> (http://www.mysqueezebox.com)
> [19-02-27 06:22:42.7226] Slim::Networking::SqueezeNetwork::_init_error
> (201) mysqueezebox.com sync init failed: Couldn't resolve IP address
> for: www.mysqueezebox.com, will retry in 900

The clue is here.
LMS cannot resolve mysqueezebox.com
Check your dns settings



VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s
*Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3
-> Onkyo CRN755 -> Wharfedale Modus Cubes
*Dining Room* -> SB Boom 
*Kitchen* -> UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones
*Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s
Everything controlled by iPeng

d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2019-02-27 Thread dolodobendan


JaMo wrote: 
> Yes, sure. Where can I get it?
> /Jan

'Here' (https://www.qnapclub.eu/nl/qpkg/545).



QLMS 7.9.2@2.03.36 x64 (digimaster) with perl 5.28 dedicated to me. :D /
QNAP 469L QTS 4.3.4

dolodobendan's Profile: http://forums.slimdevices.com/member.php?userid=67663
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Scanner.log has lots of refs to playlists and missing wavs from .cue files

2019-02-27 Thread dolodobendan


mr-b wrote: 
> Yes of course I don't want dups, but that's rather a side issue.  I'm
> very gradually working my way through the DAO rips to convert them to
> track rips. But I still want them in the library meanwhile, hence I
> don't wish to exclude .cue files!
> 
> The issue is the log filling up with superfluous info that swamps out
> any errors.

I see how this could get annoying. Maybe it should just count the .cue
files processed and then log this number if error logging is selected
for the scan module.

I don't think it creates dupes, but I'm curious about how LMS processes
this. Maybe information is just overwritten by whatever is scanned last.



QLMS 7.9.2@2.03.36 x64 (digimaster) with perl 5.28 dedicated to me. :D /
QNAP 469L QTS 4.3.4

dolodobendan's Profile: http://forums.slimdevices.com/member.php?userid=67663
View this thread: http://forums.slimdevices.com/showthread.php?t=110218

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread bpa


What is the IP gateway address set on the RPI ?
What is the IP gateway address set on the NUC ?

Internet radio will play directly from a player and not through LMS - if
Rpi cannot access internet - internet streams won't play but yet will be
able to communicate with other devices onLAN.

LMS WebUI timer is often irrelevant - it is not synced to player
progress at start.



bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Only streaming from Internet is not working; all else ok.

2019-02-27 Thread pavowren


Paul Webster wrote: 
> Regarding proxying through LMS ... it is a setting in LMS itself.
> 
> Settings/Player/your player name/Audio/Streaming Method
> If it is already set to "Proxied streaming" then that might be your
> problem ... if it is not then try it.
> 
> Note - if WiFi speed/contention is the underlying issue and LMS is only
> on WiFi then this would probably makes things worse since an extra hop
> is being introduced - but it is easy to try.

player is set for "Direct Streaming" as it should be.
both the RPi (squeezelite) and NUC (LMS) are connected to the same LAN,
so of course, local music playback is fine.
it's just the internet streaming that's the issue.
when playing a radio station, sqzlite shows "Connecting..." 

problem i believe lies in networking.
here's the server log for this morning right after powering on:


2019-02-27 06:22:41 squeezeboxserver_safe started.
[19-02-27 06:22:42.4184] main::init (387) Starting Logitech Media Server
(v7.9.1, 1522157629, Fri Mar 30 12:25:29 CEST 2018) perl 5.026002 -
x86_64-linux-gnu-thread-multi
[19-02-27 06:22:42.5335] Slim::Utils::IPDetect::_init (140) Warning:
Couldn't call connect() - falling back to 127.0.0.1
[19-02-27 06:22:42.7006] Slim::Formats::XML::gotErrorViaHTTP (339)
Error: getting http://www.mysqueezebox.com/api/sounds/v1/opml
Couldn't resolve IP address for: www.mysqueezebox.com
[19-02-27 06:22:42.7007] Slim::Plugin::Sounds::Plugin::_gotSoundsError
(83) Error: Unable to cache Sounds & Effects menu from SN: Couldn't
resolve IP address for: www.mysqueezebox.com
[19-02-27 06:22:42.7221] Slim::Formats::XML::gotErrorViaHTTP (339)
Error: getting http://opml.radiotime.com/Index.aspx?partnerId=16
Couldn't resolve IP address for: opml.radiotime.com
[19-02-27 06:22:42.7222]
Slim::Plugin::InternetRadio::Plugin::_gotRadioError (67) Unable to
retrieve radio directory from SN: Couldn't resolve IP address for:
opml.radiotime.com
[19-02-27 06:22:42.7223] Slim::Networking::SqueezeNetwork::_error (565)
Unable to login to SN: Couldn't resolve IP address for:
www.mysqueezebox.com
[19-02-27 06:22:42.7224] Slim::Networking::SqueezeNetwork::_init_error
(185) Unable to login to mysqueezebox.com, sync is disabled:Couldn't
resolve IP address for: www.mysqueezebox.com
(http://www.mysqueezebox.com)
[19-02-27 06:22:42.7226] Slim::Networking::SqueezeNetwork::_init_error
(201) mysqueezebox.com sync init failed: Couldn't resolve IP address
for: www.mysqueezebox.com, will retry in 900



pavowren's Profile: http://forums.slimdevices.com/member.php?userid=51958
View this thread: http://forums.slimdevices.com/showthread.php?t=110232

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] LogitechMediaServer for Qnap x86_64 with qts 4.2 or higher

2019-02-27 Thread JaMo


digimaster wrote: 
> Should be fixed in version 2.03.40.
> Please test it, and let me know ?

Yes, sure. Where can I get it?
/Jan



JaMo's Profile: http://forums.slimdevices.com/member.php?userid=56386
View this thread: http://forums.slimdevices.com/showthread.php?t=108292

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter


Re: [SlimDevices: SqueezeCenter] Scanner.log has lots of refs to playlists and missing wavs from .cue files

2019-02-27 Thread mr-b


Yes of course I don't want dups, but that's rather a side issue.  I'm
very gradually working my way through the DAO rips to convert them to
track rips. But I still want them in the library meanwhile, hence I
don't wish to exclude .cue files!

The issue is the log filling up with superfluous info that swamps out
any errors.



mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044
View this thread: http://forums.slimdevices.com/showthread.php?t=110218

___
Squeezecenter mailing list
Squeezecenter@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/squeezecenter