Looking to upgrade from my ReadyNAS Duo V2 as it is a tad slow at times
and also is not able to stream flac 24/192 without pausing to buffer.
Any thoughts appreciated.
Cheers, David
DavidBulluss's Profile:
mherger wrote:
> > I can not get into LMS to check logs!
>
> No need to get into LMS for the log files - if you can ssh in to it.
> Have you enabled ssh on the ReadyNAS? You'd find the file in
>
> /c/.squeezeboxserver/log/server.log
>
> --
>
> Michael
I have been into the ReadyNas
The system has run very well with only few glitches for a year or two.
Recently the players have been working ok but alternating into "trying
to connect" - three players involved, all can not be faulty at the same
time. I have been running LMS 7.9.0-1459712283. Yesterday it became
worse so I
mherger wrote:
> >This will trigger a full rescan upon next restart. But I
> guess that's still preferable over a non-functioning LMS :-).
>
>
> --
>
> Michael
Michael, thanks!
Am back in business :-)
Scanning as I write this!
David
mherger wrote:
> > I can not get into LMS to check logs!
>
> No need to get into LMS for the log files - if you can ssh in to it.
> Have you enabled ssh on the ReadyNAS? You'd find the file in
>
> /c/.squeezeboxserver/log/server.log
>
> --
>
> Michael
Michael, all gobbly gook to me. Would
Server Settings>Plugins - found Chromecast Bridge in available plugins
and ticked it. Clicked "apply", ticked prompt for "restart now" for
application restart. After restart the LMS home page shows a random
single digit number next to the info indicator at bottom left of screen.
Navigate to
philippe_44 wrote:
> Try to add direclty the link to my plugin page (see at the beginning of
> the castbridge thread). Also, clean the cache/DownloadedPlugins folder
> as well
Thanks! I added the link
http://iweb.dl.sourceforge.net/project/lms-plugins-philippe44/repo-sf.xml
and after a restart
cathcam wrote:
> I have a Netgear NVX with LMS 7.9, it's run fine since I updated to 7.9
> a year or so ago... last night it stopped working, I tried stopping and
> starting the LMS via the Netgear Admin panel/web which (apparently)
> worked but none of my Squeezeboxes, mobile apps, or the basic
Ralphy, thanks again for providing the plugin for me. It all went nicely
as soon as I realised I can map the network drive (ReadyNas with SSH)
and copy the files into the plugin folder. :)
Had I google for the plugin I would have found the files were available,
as I did eventually!
Again,
ralphy wrote:
> I've attached what I believe is the latest version from my plugins
> backup folder.
>
> I'm not sure about the repository.
Ralphy, thanks for that. Now to work out how to install it into LMS on
the ReadyNAS..
Cheers, David
Some how the DENON AVR plugin disappeared last week from LMS on my
ReadyNAS. Seeing as the google repo is down, is there another I can get
it from?
Regards, David
DavidBulluss's Profile:
kidstypike wrote:
> I am pretty clueless on all this.
>
> I keep my playlist folder on a tiny USB stick attached to the server Pi
> (see sig), this way it survives if the SD card goes bad. And I can read
> and write to it in Windows.
>
> A complete clear and rescan will clear your duplicate
kidstypike wrote:
> Where is your Playlist folder stored?
>
> Remind us what your setup is, LMS is running where, your music files are
> where?
>
> This sounds like a can't write to this location problem.
Server - Raspberry pi3 running pCP 3.21 and LMS 7.9.1.
Media library stored on ReadyNAS
DavidBulluss wrote:
> Server - Raspberry pi3 running pCP 3.21 and LMS 7.9.1.
> Media library stored on ReadyNAS Duo V2. LMS pointed at media library.
> Playlists stored on ReadyNAS Duo V2. LMS pointed at playlist folder.
>
> I have looked at permissions of the playlist folder
Hi,
Posting this in the main LMS thread as not sure if it is to do with
Raspberry, pCP, or SPOTTY!
Changed from ReadyNAS with LMS 7.9.1 to a Raspberry pi3 with pCP and LMS
7.9.1 so that I can enjoy SPOTTY, and it is great! Have now learned how
to change file paths in my saved playlists so that
kidstypike wrote:
> David
>
> Can you make a *new* playlist (just a couple of tracks will do), and
> post the Notepad text here?
This could take a while... have created a couple of playlists and saved
them in LMS but they do not appear in the folder of the playlist
files... I will persevere.
I am giving LastMix a try in conjunction with DSTM. I have it set to
local songs only. Scrobbling local and Spotify tracks. Quite impressed!
It always adds 5 songs on to to list at a time. The first 5 added are
very close to the seed track, but as each 5 is added it wanders away
quickly. I
Hi Michael,
thanks for your reply and advice. I changed MAX_TRACKS to 25 and
restarted LMS (of course!) and it works perfectly. Thanks again!
Cheers, David
*Server* pi3 pCP LMS
*Media* ReadyNAS DuoV2
*Lounge/dining areas* SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS
Broken again! The auto scan at 9.00 am today did not happen. I then set
another scan for a later time, and that time passed without scan. I had
done a restart of pCP and LMS at 7.00 am before the autoscan programmed
time, and the server.log shows that the rescan plugin was loaded. When I
checked
About a month ago I set up the rescan timer for a daily scan of changed
and new files. It worked on the dot every morning at the selected time.
I have noticed over the past few days that it no longer scans
automatically. I have checked all settings, restarts, etc. pCP on the
Pi3 has correct time
mherger wrote:
> Anything in server.log? Enable debugging for plugin.rescan.
That may have found the problem... there is no plugin.rescan listed in
logging. See screen cap.
Regards, David
24061
+---+
|Filename:
mherger wrote:
> I'd suggest you double-check whether the plugin is installed at all?
It appears to be installed and active.
24062
+---+
|Filename: Screenshot-2017-11-22 Server Settings.png|
|Download:
DavidBulluss wrote:
> It appears to be installed and active.
>
Interesting that after installing the overnite update 7.9.1 - 1511211491
I set a time for auto scan, and it worked. All happy now! :D
David
*Server* pi3 pCP LMS
*Media* ReadyNAS DuoV2
*Lounge/dining areas* SBT > Deno
LMS 7.9.2 update from 2 nights ago appears to install ok on my Pi3 (pCP)
and is reported under "information" as the installed version, but
regardless of how many times I install it I get advice that updated
version 7.9.2-1527493162-noCPAN.tgz is available for installing. Anyone
else getting
paul- wrote:
> Synchronizing is not a perfect science, and if you have audio problems,
> should be the first thing you disable.
>
> If the hardware is not identical, problems are worse..even if they
> are the same, clock rates of the two devices are never identical. This
> causes them to
Paul Webster wrote:
> Write it down on a piece of paper and stick it to the back of the
> players!
Not a bad idea, have already done that with the pi3 user name and
password... must be age LOL :p
*Server*pi3 pCP3.5.0 LMS7.9.2
*Media*ReadyNAS DuoV2
*Lounge/dining areas*SBT > Denon AVR2113 >
Using pi3 with LMS 7.9.2 always updated. SBT is connected by wireless to
internet modem. The connection is used by other devices and has no
streaming issues. Highest rate FLAC files stream from my library over
wifi to SBT with no problems. Usually if there is a buffering issue the
screen reads
As an aside, I have just come to realise that DSTM with LastMix ticked
actually streams from Spotty; I naively thought that it was streaming
from LastFM, I realise now that it only pulls the mix down from there!
So when I say I am having pauses in streaming from LastFM & Spotty I
really mean
bpa wrote:
> SBT is connected by wireless and if Pi3 is also connected by wireless to
> internet then perhaps the double hop of internet traffic is too much for
> WLAN. With local file - there is only a single transfer active.
A good thought, but pi3 is connected to modem/router by LAN cable.
paul- wrote:
> How many players do you have (even counting ones that are turned off)
> Are you sure you don't have another player sync'd.
>
> Also in the case of wifi, it is not just your activity, but a neighbor
> could be operating on the same wifi frequency..in which case you are
>
mherger wrote:
>
>
> And yes, please try without the syncing.
>
> And please check what streaming format you're using
> (Settings/Advanced/File formats). If it's PCM, then try FLAC instead, or
>
> even MP3 (just to rule out a wireless bandwidth issue).
> --
>
> Michael
Michael - PCM is
Had issues with my pi3 since pCP update to 4.0.0 earlier in the week
(posted in pCP thread) and ended up with SD card clean and new pCP 4.0.0
image install, then new LMS 7.9.2 install, set up etc. Was working After
last night's LMS update I am unable to start LMS. Not sure if it is pCP
4 issue
Pi3 with pCP 4.0.0b6 and LMS 7.9.2 nightly. Using DSTM I select a seed
and of course it populates correctly with new tracks and the playlist
grows. That is all good, no problems with DSTM, but if I stop LMS and
then restart pCP (and obviously LMS) then LMS will often revert to the
playlist I had
Greg Erskine wrote:
> What happens if you press [Backup]!?
I just tried pressing BACKUP in pCP and then after it returned to main
page I restarted the Pi. The playlist had disappeared except for the two
seed tracks, it restarted again where it had been 2 hours before.
David
*Server*rpi3
Am still experiencing the same problem. Apart from restarting my full
system... pCP, LMS, wifi router and access points... nothing has changed
but the playlist has reverted to one three days ago. Had been playing
one of my saved playlists yesterday. Not a huge issue, but annoying.
Cheers, David
Update to Lastmix FM = don't stop the music (V1.1.7) appeared today. Is
there a brief of changes or bug fixes available?
Cheers, David
*Server* pi3 pCP LMS
*Media* ReadyNAS DuoV2
*Lounge/dining areas* SBT > Denon AVR2113 > Bose Acoustimass10 / Krix
Seismix3 18" 300w RMS custom cinema sub (&
mherger wrote:
> > Update to Lastmix FM = don't stop the music (V1.1.7) appeared today.
> Is
> > there a brief of changes or bug fixes available?
>
> Prefer lossless streaming services over lossy. Eg. if you had TIDAL and
>
> Spotty installed, it would always use TIDAL if possible.
>
> --
>
Since update to V1.1.7 I noticed that it was back to 5 max. tracks
selected from the seed, I had previously set it to 25. Update wrote over
that and took it back to 5. No problem, have edited MAX TRACKS = 25.
Just to adise anyone else who had set max tracks previously to a
different number.
Paul Webster wrote:
> Have you checked to see if the DSTM generated playlist is written out to
> "disk"?
> Perhaps it is only in LMS memory and not ever written to a file.
That is a good thought... I wish I knew how to check it!
*Server*rpi3 pCP4.0.0 LMS7.9.2
*Media*USB hard drive
DavidBulluss wrote:
> Nightly update of LMS succeeded this morning - v7.9.2, 1537960170 - but
> LMS keeps insisting that there is a new update available both in LMS GUI
> and in pCP GUI. Have updated now 4 times, restarted system etc. but it
> is still insistant. I guess it will co
Nightly update of LMS succeeded this morning - v7.9.2, 1537960170 - but
LMS keeps insisting that there is a new update available both in LMS GUI
and in pCP GUI. Have updated now 4 times, restarted system etc. but it
is still insistant. I guess it will correct itself after next nightly.
Cheers,
Nightly update of LMS succeeded this morning - v7.9.2, 1537960170 - but
LMS keeps insisting that there is a new update available both in LMS GUI
and in pCP GUI. Have updated now 4 times, restarted system etc. but it
is still insistant. I guess it will correct itself after next nightly.
Cheers,
For all of this week the nightly update 7.9.2 - 53860 is available but
when I try the 'nightly update' in pCP first message is
-LMS Update Found:
http://downloads.slimdevices.com/nightly/7.9/sc/d3dc8958120af6999b1f4985159438b245a43694/logitechmediaserver-7.9.2-1544453860-noCPAN.tgz
Download
paul- wrote:
> Reported several times and fix is noted in the pCP thread.
> https://forums.slimdevices.com/showthread.php?109404-ANNOUNCE-piCorePlayer-4-0-0=926928=1#post926928
Thanks Paul :o
*Server*rpi3 pCP4.0.0 LMS7.9.2
*Media*USB hard drive
*Lounge/dining areas*SBT > Denon AVR2113 >
DLD-UK wrote:
> I am so out of date on such things. How do you run LMS on a Pi? Is there
> a download with the operating system and LMS in one package? I also
> didn't know I could use external storage with LMS. How do I do that?
I heartily support using a Raspberry Pi to run LMS, works a
mherger wrote:
> > It always adds 5 songs on to to list at a time. The first 5 added are
> > very close to the seed track, but as each 5 is added it wanders away
> > quickly. I understand why, so my question is: Can the setting for
> number
> > of songs added be changed? Have been searching for
mherger wrote:
> > I have previously edited the constant MAX_TRACKS in
> DontStopTheMusic.pm
> > to increase from 5 to 10 or more. Since the recent DSTM update I am
> > unable to find that line in the file in the plugins folder. Are you
> able
> > to point me to the line I need to alter please.
The auto rescan not working so I try to set time but it always reverts
to 12.00 am and does not scan. It is turned on. Has been working with no
problem until around when pCP 5.0.0 was installed. I also reinstalled
LMS V 7.9.2 at the same time. Soon after I noticed auto rescan not
working. I have
mherger wrote:
> > The auto rescan not working so I try to set time but it always
> reverts
> > to 12.00 am and does not scan. It is turned on. Has been working with
> no
> > problem until around when pCP 5.0.0 was installed. I also reinstalled
> > LMS V 7.9.2 at the same time. Soon after I
I did nightly update on Saturday morning and since then I am unable to
connect to LMS via computer interface or via SBT. In pCP when I try to
restart LMS the message is " Slimserver PID not found, Server already
stopped. I have tried re booting pCP and also power off/on to the
raspberry Pi but
paul- wrote:
> David,
>
> If LMS wont run, you will have to do a manual update. As LMS normally
> does the update check.
>
> https://www.picoreplayer.org/how_to_upgrade_lms.shtml
>
> Paul
Thanks, all working again :cool:
I had actually tried that yesterday but stupidly I was typing the
mherger wrote:
> > The next nightly update will probably include it if you want to wait.
>
> A fixed (reverted) build should have been available for almost 24h now.
>
> Does the latest still not work?
>
> http://downloads.slimdevices.com/nightly/index.php?ver=8.0
>
> --
>
> Michael
I am
I am using Raspberry pi3 with pCP and nightly updates of LMS. I have set
the correct system time in pCP and correct time is showing on my LMS
Touch screens. Internet modem/router time has been checked and is set
correctly. My computer system is displaying correct time. My problem is
that
mherger wrote:
> > *Server*rpi3 pCP5.0.1 LMS7.9.2
>
> Please try to get up to date with everything and report back.
Actually my system is running up to date pCP & LMS. I copied the info I
put into my message from my Signature which I had updated not long ago
to match my actual system but it
mherger wrote:
> > Actually my system is running up to date pCP & LMS. I copied the info
> I
> > put into my message from my Signature which I had updated not long
> ago
> > to match my actual system but it appears the revised signature did
> not
> > save. Long story cut short, I am using pCP
mherger wrote:
> > I think that there have to be at least 2 before it kicks in
>
> No, that's for when there are more than 2 tracks in the queue. Once
> playback of the third to last track has started, DSTM would kick in. But
>
> that's not true in case of a single track.
It certainly works
56 matches
Mail list logo
