Unfortunately due to design by architects here this will not be possible at
this moment, but I will suggest this up the chain. So we will stick with
v3.5.28. Is there plans to make the windows version available in the future.
Chris Latino
Systems Platform Engineer II
Mastercard
1 Angel Lane |
You only have one port open for Squid
http_port 3128
You need two ports, one for HTTP and another for HTTPS.
Also, if you are going to block HTTPS based on the domain name, you need to
do sslBump to get the SNI of the destination website and then terminate the
SSL connection.
On Thu, Feb 13, 2020
I think so.
Here is the conf file: https://pastebin.com/DKMbwNV6
Felipe Arturo Polanco escreveu no dia quinta,
13/02/2020 à(s) 16:22:
> Did you configure Squid to accept both HTTP and HTTPS ports?
>
> Please share your squid.conf file.
>
> Thanks,
>
> On Thu, Feb 13, 2020 at 12:18 PM Patrícia
Sorry Chris,
We still cannot find time to finish compilation of Squid 4 for Windows.
The Linux version running within Hyper-V works much better most probably. Why
not to try it?
Best regards,
Rafael Akchurin
Diladele B.V.
From: squid-users On Behalf Of
Latino, Chris
Sent: Thursday, 13
Did you configure Squid to accept both HTTP and HTTPS ports?
Please share your squid.conf file.
Thanks,
On Thu, Feb 13, 2020 at 12:18 PM Patrícia Sousa wrote:
> Hi,
>
> Thanks for the tip,
>
> Enabling debug_options I can see that the wget from the machine computer
> to the Squid machine does
Hi,
Thanks for the tip,
Enabling debug_options I can see that the wget from the machine computer to
the Squid machine does not goes through the proxy. Any idea why?
Felipe Arturo Polanco escreveu no dia quinta,
13/02/2020 à(s) 15:32:
> Hi,
>
> For this, you need to use IPtables to block at
Hi
Hoping you can help we are using squid for windows 3.5.28
Our vulnerability scanner is saying this isn't the latest version but I can't
see a 4.10 version for windows and when I go to
https://squid.diladele.com/
It's still showing the 3.5.28 version
Chris Latino
Senior Systems Platform
On 2020-02-13 9:10 am, Patrícia Sousa wrote:
I'm using the squid proxy and I'm trying to block some connections (incoming and outcoming traffic) from a certain ip address. However, for example, if I deny all the connections (http_access deny all) it only blocks the connections that I made to
Hi,
For this, you need to use IPtables to block at the network level.
SSH uses port 22/tcp but wget uses HTTP, it should have been blocked by
squid.
Enabled debug_options in squid to see why it was allowed.
On Thu, Feb 13, 2020 at 11:10 AM Patrícia Sousa wrote:
> I'm using the squid proxy
I'm using the squid proxy and I'm trying to block some connections
(incoming and outcoming traffic) from a certain ip address. However, for
example, if I deny all the connections (http_access deny all) it only
blocks the connections that I made to websites for example, but if I use
another PC and
10 matches
Mail list logo
