What are your settings for Safe_ports and SSL_ports?
I am using default settings.
acl SSL_ports port 443 563
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 563 # https, snews
acl Safe_ports port 70 # gopher
acl Safe_ports port
Hi,
I'm using squid 2.6 as an accelerator to speed up some dynamic
generated content.
I have different hostnames which all point to the same IP and I'd like
squid to use the same cache regardless the hostname.
For example, in my current setup for these two requests:
http://a.host.com/t.cgi
Hi
I'm looking for an example of how to have white lists for one subnet
but the other subnet is full access ...
Many Thanks
--
Gregory Machin
[EMAIL PROTECTED]
www.linuxpro.co.za
I test this two antivirus
Drweb and avast fot icap
Drweb bad support for preview mode :( and many bugs
Avast dont support preview
from avast support
Thank you for your answer.
Now I know what you mean. But WebGate don´t support the feature
On 3/26/07, James Sutherland [EMAIL PROTECTED] wrote:
LFUDA should be a close approximation to the result the original
poster
wanted: anything getting hit only by a robot will still not be
'frequently'
used, so although it will be cached initially, it will soon be evicted
again.
Yes, it's a
Hmm I did set /proc/sys/net/ipv4/ip_local_port_range to 1024 65000
I will look into how to manual assign port at the squid then.
Thanks,
Khanh
-Original Message-
From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Sent: Monday, March 26, 2007 6:29 PM
To: NGUYEN, KHANH, ATTSI
Cc:
Quoting [EMAIL PROTECTED]:
Quoting Garry Glendown [EMAIL PROTECTED]:
Garry Glendown wrote:
one of our customers has asked about getting some information about the
amount of surfing users are doing. Problem is that most users are using
terminal servers to do their surfing, so all I get at the
tis 2007-03-27 klockan 09:36 -0400 skrev NGUYEN, KHANH, ATTSI:
Hmm I did set /proc/sys/net/ipv4/ip_local_port_range to 1024 65000
I will look into how to manual assign port at the squid then.
Note: You will also need multiple IP addresses on the server.
Regards
Henrik
signature.asc
multiple IP addresses on the server is not a problem. I can have more than one
address bind to one network interface. What will it help if I already use up to
65K sockets on the time_wait state? should 65K limit is per box or per ip
address? and why is this 65K limit? can I make 100K or higher?
On 3/27/07, Charl Loubser [EMAIL PROTECTED] wrote:
My squid.conf :
acl local_network dst 192.168.0.0/24
acl local_dmz dst 192.168.1.0/255.255.255.240
I believe you mean 'acl local_network src 192.168.0.0/24' and 'acl
local_dmz src 192.168.1.0/255.255.255.240'
http_access allow localhost
I installed 2.6STABLE12-20070327 on our test proxy and Fidelity Active Trader
Pro is now working correctly. It is getting the streaming updates.
Thank you for the help!
-- Mike Mitchell
-Original Message-
From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Sent: Monday, March 26, 2007 7
Indunil Jayasooriya wrote:
Hi ,
I am now running squid with ncsa_auth.
I have bound ip addresses to usernames. So users now can access
Internet from their ips.
Now I want a few users to prevent from accessing all the sites. But
Instead, I want them to allow to access a few sites scuh as
tis 2007-03-27 klockan 10:40 +0200 skrev Ehud Shabtai:
For example, in my current setup for these two requests:
http://a.host.com/t.cgi
http://b.host.com/t.cgi
Squid would generate a cache entry for each request where I'd like it
to use the same cache for both.
Is there a setup option
Hi,
I have been struggling with the next problem for 3 weeks now, and have been
unable to find an answer to the problem.
My network setup is as follows:
LAN Clients: Windows 2000 / XP
Network Address: 192.168.2.0
Directory Services: Active Directory
All clients are in Domain.
Proxy SErver:
tis 2007-03-27 klockan 11:36 -0400 skrev NGUYEN, KHANH, ATTSI:
multiple IP addresses on the server is not a problem. I can have more
than one address bind to one network interface. What will it help if I
already use up to 65K sockets on the time_wait state? should 65K limit
is per box or per
On 3/27/07, Henrik Nordstrom [EMAIL PROTECTED] wrote:
If you only use the defaultsite= option to http_port and not vhost then
Squid will process all requests as requests for that single site.
Thanks a lot. After removing the vhost option it works great.
--
Ehud Shabtai
tis 2007-03-27 klockan 13:12 -0400 skrev Mike Mitchell:
I installed 2.6STABLE12-20070327 on our test proxy and Fidelity Active
Trader Pro is now working correctly. It is getting the streaming
updates.
Excellent!
Thank you for the help!
Thank you for bringing up the issue and helping
Hello,
I am still having a issue with high CPU usage.
In a previous post it was suggested that my ACL (which is 8k+ lines)
could be the culprit.
Also i am going to try a newer squid version, currently i am on 2.5.6
going to try both
squid-2.5.STABLE14 and a squid2.6.x version
I noticed in the
i´m using squid with squidguard .. about 3.000.000 of expressions..
squidguard is working veryyy good.. you can try... but my system is
Linux.. for solaris.. i believe that you can change some codes (or not
:P)
On 3/27/07, Chris Rosset [EMAIL PROTECTED] wrote:
Hello,
I am still having a
Alexandre,
Mind if i ask what version of Berkeley DB your using?
I was installing squidguard last week with 4.1, 4.2 and 4.5
checked the squidguard mailing lists and found out you need a older version
So i tried 3.3 but squidguard's complaining it still cant find it even with
-with-db=DIR
On 3/27/07, Chris Rosset [EMAIL PROTECTED] wrote:
So just checking if the --enable-gnuregex might help, or should i go
with squidgard or squirm some other redirector?
I'm not sure what you are trying to acl, but Dansguardian works nicely
for filtering purposes.
Chris
i´m using db 4 !! i will check what´s the exact version ...
Alexandre
On 3/27/07, Chris Nighswonger [EMAIL PROTECTED] wrote:
On 3/27/07, Chris Rosset [EMAIL PROTECTED] wrote:
So just checking if the --enable-gnuregex might help, or should i go
with squidgard or squirm some other redirector?
Here i am using squid from long time with no problem
but some of new Voice chats and URLs
Are unable to open with squid
and if i remove squid proxy and change the proxy to
isp proxy it works fine
this URLs
http://www.hala5.net/hala5/chat/iVocalize4Setup.exe
And
On Tue, Mar 27, 2007, squid learner wrote:
iv4://logo=http://www.hala5.net/logo.htmamp;logowidth=-1amp;prompt=hala5.net%20Voice%20Chatamp;title=hala5.net%20Voice%20Chatlayout=topwbsize=20tcsize=70amp;server=70.85.254.219:5049amp;room=5c033129;pass=
Thats not a HTTP protocol. It'll be supported
I test this two antivirus
Drweb and avast fot icap
Drweb bad support for preview mode :( and many bugs
Avast don'tsupport preview
from avast support
Thank you for your answer.
Now I know what you mean. But WebGate don't support the feature
25 matches
Mail list logo