On tor, 2008-05-29 at 04:55 +0300, Mr. Issa(*) wrote:
THanks Chris it worked BUT check this:
Clearing URL http://www.google.com/ ..
HTTP/1.0 404 Not Found
Server: squid/2.6.STABLE19
Date: Thu, 29 May 2008 01:31:43 GMT
Content-Length: 0
.. done.
it Says that the URL is not found?
On 28.05.08 09:36, [EMAIL PROTECTED] wrote:
Hello, I have a problem with Squid. Every day, over 0:00h (when logs are
rotated) my squid generates a core file that almost full all
'/var/spool/squid' partition. Looking at squid-cache logs, here is what it's
shown:
2008/05/27 00:06:12|
Do you mean MSN messenger? No, it wont pass thru squid, only if you
block port 1863. Are you sure that is squid causing this?
Amod Kulkarni wrote:
Hello,
I am using squid proxy in our network.
Since last few days, we are facing problem with our squid proxy server
that it gets disconnected
Hello Squid,
Presently I have a problem to access a URL
The problem details is given below:
The requested URL could not be retrieved
While trying to retrieve the URL: http://googlewebtoolkit.blogspot.com/
The following error was encountered:
Unable to determine IP address from host name
Amod Kulkarni wrote:
Hello Squid,
Presently I have a problem to access a URL
The problem details is given below:
The requested URL could not be retrieved
While trying to retrieve the URL: http://googlewebtoolkit.blogspot.com/
The following error was encountered:
Unable to determine IP
JPP wrote:
Ooops. Must have missed that post to the list if there was one... I will wait
patiently!
Or you could grab the daily snapshot of 2.7.
http://www.squid-cache.org/Versions/v2/2.7/
Thanks for the quick response.
Jerome
On Thu, 29 May 2008 13:35:43 +0800, Adrian Chadd wrote
Treker Chen wrote:
Dear all
I downloaded squid-3.HEAD-20080528, compiled it with --enable-ssl
--enable-icap-client. and configured squid.conf with SSL bump with the
following setting
http_port 3128 sslBump cert=/usr/local/squid/etc/apache.crt
key=/usr/local/squid/etc/apache.pem
ssl_bump allow
Hello Tommy,
First increase the file descriptor for your terminal using ulimit -n
8192 . Then start the squid and check the cache.log.
Thanks,
-Visolve Squid Team
www.visolve.com/squid/
[EMAIL PROTECTED] wrote:
greeting for dear all...
how can i upgrade my file descriptor in my
Ritter, Nicholas wrote:
In websense the client IP addresses that show up are those of the squid boxes I
have deployed. Websense does not utilize, as far as I know, the x-forwarded-for
header.
The doc on squid-cache.org about how to setup TPROXY with squid is a bit out of
date because the
Yup, and this could be the same problem you are having with your
messaging software.
This is like DNS failures.
Amos Jeffries wrote:
Amod Kulkarni wrote:
Hello Squid,
Presently I have a problem to access a URL
The problem details is given below:
The requested URL could not be retrieved
Dear All...
I'm already solving the problem for that file descriptor. Thanks for support :)
This is a little bit of my cache.log :
2008/05/29 19:18:12| Starting Squid Cache version 2.6.STABLE18 for
i386-unknown-openbsd4.3...
2008/05/29 19:18:12| Process ID 19231
2008/05/29 19:18:12| With 8192
Leonardo Rodrigues Magalhães wrote:
Amos Jeffries escreveu:
Two things.
1) The ACL should be dstdomain .microsoft.com not a slow regex.
OK, fixed that it wont make much difference for me, as i have
very few requests on this squid box and a lot of available CPU power.
2) The
Amos Jeffries escreveu:
Anyway . even with request_header_access or
reply_header_access as i told on the original message, i cannot see
these parameters when using 'Current Squid Configuration' option of
cachemgr.cgi. I think this looks a minor bug ..
It does. Could you file
That is interesting to note, and part of where my problem lies. Given
the way the files are marked on the balabit site, I would not have known
of the support versions and differences. I just downloaded the patches
for the versions of squid, iptables, and kernel I was using.
During the setup of
Chris Robertson [EMAIL PROTECTED] 5/28/2008 5:03 PM
Proxies. Plural. How are you spreading the traffic among the proxies.
A number of authentication requiring websites associate login
credentials with a source IP. Using a round robin load balancer
(without source NATing the outgoing
That error looks like your ACL are denying access somewhere. Is there a peer
configured and never_direct lines anywhere?
Nope, there is no peer or never_direct configured, the following is
the entire squid.conf with # filtered
debian40r3:/usr/local/squid# more etc/squid.conf
acl manager
Just for everyone's future reference, I found the problem with my setup.
There was a Barracuda Networks webfilter located between our Cisco ASA5520
and the Squid box. Even though Barracuda claims the webfilter should work
fine with Squid, it broke my Squid/WCCP setup. In their defense, it does
Just for everyone's future reference, I found the problem with my setup.
There was a Barracuda Networks webfilter located between our Cisco ASA5520
and the Squid box. Even though Barracuda claims the webfilter should work
fine with Squid, it broke my Squid/WCCP setup. In their defense, it does
Just for everyone's future reference, I found the problem with my setup.
There was a Barracuda Networks webfilter located between our Cisco ASA5520
and the Squid box. Even though Barracuda claims the webfilter should work
fine with Squid, it broke my Squid/WCCP setup. In their defense, it does
Just for everyone's future reference, I found the problem with my setup.
There was a Barracuda Networks webfilter located between our Cisco ASA5520
and the Squid box. Even though Barracuda claims the webfilter should work
fine with Squid, it broke my Squid/WCCP setup. In their defense, it does
Just for everyone's future reference, I found the problem with my setup.
There was a Barracuda Networks webfilter located between our Cisco ASA5520
and the Squid box. Even though Barracuda claims the webfilter should work
fine with Squid, it broke my Squid/WCCP setup. In their defense, it does
Just for everyone's future reference, I found the problem with my setup.
There was a Barracuda Networks webfilter located between our Cisco ASA5520
and the Squid box. Even though Barracuda claims the webfilter should work
fine with Squid, it broke my Squid/WCCP setup. In their defense, it does
I have a consultant telling me that I need to have my squid server
dual homed and bypassing my firewall for squid to be able to properly
report usage. Is this the case? Is there some other reason this config
is required?
Hi. I am using squid 2.6 as my reverse proxy. Sometimes there are many
many requests from same ip in a very shot period ( like 100 requests/
second). is it possible to deny these ips dynamically ?
I has written a script to check access log one time per minute in cron
and add these ips into deny
In my cache.log I get flooded with the following error:
parseHttpRequest: Unsupported method 'JEDI'
From what I've been able to find, JEDI must refer to Joint Endeavour
of Delphi Innovators. Has anyone encountered this, suggest a
workaround, etc.?
Running SQUID 2.7.STABLE1-20080528 on
Squidly wrote:
I have a consultant telling me that I need to have my squid server
dual homed and bypassing my firewall for squid to be able to properly
report usage. Is this the case? Is there some other reason this config
is required?
reporting and connectivity are separate issues.
measuring
I have tried quite a few variations of the squid_ldap_group eg:
[EMAIL PROTECTED]:/usr/lib/squid# ./squid_ldap_group -b
ou=groups,dc=example,dc=com -f
((cn=%v)(member=%u)(objectClass=group)) -B
ou=people,dc=example,dc=com
testuser testgroup
ERR
May 29 10:00:11 control slapd[5925]: hdb_search: no
Rhino wrote:
In my cache.log I get flooded with the following error:
parseHttpRequest: Unsupported method 'JEDI'
From what I've been able to find, JEDI must refer to Joint Endeavour
of Delphi Innovators. Has anyone encountered this, suggest a
workaround, etc.?
Running SQUID
Henrik Nordstrom wrote:
On tor, 2008-05-29 at 04:55 +0300, Mr. Issa(*) wrote:
THanks Chris it worked BUT check this:
Clearing URL http://www.google.com/ ..
HTTP/1.0 404 Not Found
Server: squid/2.6.STABLE19
Date: Thu, 29 May 2008 01:31:43 GMT
Content-Length: 0
.. done.
it Says that the
Squidly escreveu:
I have tried quite a few variations of the squid_ldap_group eg:
[EMAIL PROTECTED]:/usr/lib/squid# ./squid_ldap_group -b
ou=groups,dc=example,dc=com -f
((cn=%v)(member=%u)(objectClass=group)) -B
ou=people,dc=example,dc=com
testuser testgroup
ERR
But cannot get this to run
Rob Asher wrote:
Chris Robertson [EMAIL PROTECTED] 5/28/2008 5:03 PM
The traffic isn't being balanced among the proxies. I have multiple locations,
4 to be exact, all trying to access the same site with the same results. Each
location uses it's own proxy. None of them are transparent
Rhino wrote:
In my cache.log I get flooded with the following error:
parseHttpRequest: Unsupported method 'JEDI'
From what I've been able to find, JEDI must refer to Joint Endeavour
of Delphi Innovators. Has anyone encountered this, suggest a
workaround, etc.?
Running SQUID
Dear All...
How to limiting the download manager session in Squid? I have the
problem for that case. I wanna limit only 2 download session in every
download manager that connected to my Squid box.
My configuration like this :
acl koneksi maxconn 2
acl TIME-03 time SMTWHFA 00:00-07:59
acl
I run squid in a DMZ and have no problem getting usage information from it.
The only issue I could see a firewall causing is if your firewall is using NAT
(Network Address Translation) or PAT (Port Address Translation), you could not
determine which machine the request came from, unless you
Hello
I want to create a captive portal able to deal with users that are behind a
NAT.
The network diagram is :
userA1---(priv subnet)---[NAT gateway A]---(pub subnet)---|
userA2---(priv subnet)---[NAT gateway A]---(pub subnet)---|
... |
I have setup a squid server with dansguardian. I also have a server setup
with iptables acting as the default gateway. I have transparent proxy with
dansguardian filtering working. When using transparent proxy, the squid
server does not process the Ident info. If I manually put in the proxy info
[EMAIL PROTECTED] wrote:
Dear All...
How to limiting the download manager session in Squid? I have the
problem for that case. I wanna limit only 2 download session in every
download manager that connected to my Squid box.
My configuration like this :
acl koneksi maxconn 2
acl TIME-03 time
I am hoping there is a way to encrypt user name and password as they
are are passed from the browser to my debian squid box. I have looked
around the web and just keep getting more confused. I found some
reference to digest_ldap_auth but that does not exist in my lib and
seems to be for windowz.
On tor, 2008-05-29 at 12:34 -0700, modulok wrote:
I have setup a squid server with dansguardian. I also have a server setup
with iptables acting as the default gateway. I have transparent proxy with
dansguardian filtering working. When using transparent proxy, the squid
server does not process
On tor, 2008-05-29 at 10:05 -0700, Squidly wrote:
I have tried quite a few variations of the squid_ldap_group eg:
[EMAIL PROTECTED]:/usr/lib/squid# ./squid_ldap_group -b
ou=groups,dc=example,dc=com -f
((cn=%v)(member=%u)(objectClass=group)) -B
ou=people,dc=example,dc=com
testuser testgroup
On tor, 2008-05-29 at 23:30 +0800, Changying Li wrote:
Hi. I am using squid 2.6 as my reverse proxy. Sometimes there are many
many requests from same ip in a very shot period ( like 100 requests/
second). is it possible to deny these ips dynamically ?
I has written a script to check access
On tor, 2008-05-29 at 06:53 -0700, domboy wrote:
Just for everyone's future reference, I found the problem with my setup.
There was a Barracuda Networks webfilter located between our Cisco ASA5520
and the Squid box. Even though Barracuda claims the webfilter should work
fine with Squid, it
On tor, 2008-05-29 at 21:23 +0800, Treker Chen wrote:
And if i set always_direct allow all in squid.conf, then i can
connect to https website without problem
Sounds like ssl bump handles decrypted https requests as accelerated
requests by default.. file a bug on that please.
but i don't
On tor, 2008-05-29 at 16:21 -0700, Squidly wrote:
I am hoping there is a way to encrypt user name and password as they
are are passed from the browser to my debian squid box. I have looked
around the web and just keep getting more confused. I found some
reference to digest_ldap_auth but that
I am runnig squid servers on firewalls and on DMZ. no issue at all.
--
Thank you
Indunil Jayasooriya
Hi,all
I have a script which used to parse swap.state, it works well
in aufs, but I don't know whether it will be ok in coss,who can give me
some advices?thanks a lot.
Is there a good guide detailing how to set this digest up with openLdap?
On Thu, May 29, 2008 at 4:40 PM, Henrik Nordstrom
[EMAIL PROTECTED] wrote:
On tor, 2008-05-29 at 16:21 -0700, Squidly wrote:
I am hoping there is a way to encrypt user name and password as they
are are passed from the
Hello
I want to create a captive portal able to deal with users that are behind
a NAT.
The network diagram is :
userA1---(priv subnet)---[NAT gateway A]---(pub subnet)---|
userA2---(priv subnet)---[NAT gateway A]---(pub subnet)---|
...
Hi,
Is there a good guide detailing how to set this digest up with openLdap?
http://yajith.blogspot.com/2007/12/squid-ldap-and-active-directory.html
--
Thank you
Indunil Jayasooriya
That is interesting to note, and part of where my problem lies. Given
the way the files are marked on the balabit site, I would not have known
of the support versions and differences. I just downloaded the patches
for the versions of squid, iptables, and kernel I was using.
So you have the
Chris Robertson wrote:
cc wrote:
Hi,
I have Squid: The Definitive guide and have installed
v2.6STABLE 16 installed.
I'm *quite* confused as to how to access the cache-manager.
The book has the following:
Cache Host: localhost
Cache Port: 3128
Manager Name:
Password:
continue
How can I use squid with auto-proxy ISP
Do I need to use cache_peer ?
Thanks and Advance
Mr Crack 007
52 matches
Mail list logo
