* bijayant kumar bijayan...@yahoo.com:
Hello list,
I want to have reports about the squid performance like how much
caching is being done by Squid, how much bandwidth is being saved by
the squid cache by returning objects from cache. I thought of cache
manager output but my seniors want to
Hi All,
Two wccp services 80, 90 is detected by the router. 80 - outgoing,
90-incoming. But return traffic does not comes to squid. No packets
redirected by the service 90.
Router IOS version is
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version
12.4(13b), RELEASE
Hi.
You can use cacti but it's MRTG-like. The best tools I know for squid
reports are sarg (which is rather popular) and lightsquid (it makes
reports a lot faster but I don't know if it's popular outside Russia).
Regards,
LPIC-1, EMCPA
Nikita Andreev
Hi, all,
I'm trying squid as a reverse proxy for a web application.
I have a problem when my URL is not ending with a trailing slash.
For example :
http://ip-proxy/test/ = OK
http://ip-proxy/test = KO, Problem
if I send the request directly to the IIS server we have :
http://ip-iis/test/ = OK
hello all,
my clients should access an IIS website requesting ntlm authentication
'WWW-Authentication'. they all use ie6 and proxied through a chain of
two proxies.
the first one hosted in internal network making the whole job of
logging, validating ntlm authentication coming from all the ie's
Hi ALL
Here is HOW to - Step by Step. I use this on Redhat/CentOS
SARG - Step by Step -
Fisst install rpmforge-release RPM .
Then, perform below steps
[r...@worldnet ~]# yum install sarg
[r...@worldnet ~]# cd /etc/httpd/conf.d/
[r...@worldnet conf.d]# cp sarg.conf sarg.conf.orig
On Fri, Jan 16, 2009 at 11:08 AM, François-Xavier VIOLET
fxvio...@ciril.net wrote:
Hi, all,
I'm trying squid as a reverse proxy for a web application.
I have a problem when my URL is not ending with a trailing slash.
For example :
http://ip-proxy/test/ = OK
http://ip-proxy/test = KO,
vincent.blon...@ing.be wrote:
hello all,
my clients should access an IIS website requesting ntlm authentication
'WWW-Authentication'. they all use ie6 and proxied through a chain of
two proxies.
the first one hosted in internal network making the whole job of
logging, validating ntlm
Hello.
I would like to know what does these errors mean:
2009/01/15 20:44:39| ctx: enter level 0:
'http://prev.explabs.net/sspost3.aspx'
2009/01/15 20:44:39| http.cc(561) HttpStateData::cacheableReply:
unexpected http status code 100
2009/01/15 21:04:42| ctx: exit level 0
2009/01/15 21:04:42|
Greetings
I am running two squid boxes as content filters for a number of
schools. Google has recently changed and we are now getting a Sorry
you look like a botnet
We're sorry...
... but your query looks similar to automated requests from a computer
virus or spyware application. To
Amos, Henrik
I need your help. I am a newbie in squid + tproxy + WCCP. So I sent lot
messages to you.
Now i describe my problem. I have a router with 2 Ethernet, 6 Serial
interfaces. LAN users connected via Ethernet 0/0 and squid machine
connected via Ethernet 0/1 interface. And internet
On Fri, Jan 16, 2009 at 11:27 AM, Amos Jeffries squ...@treenet.co.nz wrote:
howard chen wrote:
Hello,
(1) Is that Vary: * exact header, or Vary: with some header names?
Exactly Vary: *
(2) do the pages have Cache-Control: must-revalidate ?
or does squid.conf have a short
MALWARE ALERT!
I had this, my PC was infected by a drive by download from an innocent site.
2009/1/16 jeff donovan dono...@beth.k12.pa.us:
Greetings
I am running two squid boxes as content filters for a number of schools.
Google has recently changed and we are now getting a Sorry you
Some additional thoughts.
From memory, when my PC was infected it was bypassing squid and going
direct. (My PC was allowed through the firewall for testing) The
malware was looking for other sites to infect using Google. As google
are already blocking your access I would start looking at your
hello :)
I've took a break of working live on squid and started reading more about it
to see what I'm getting myself into..
I managed to get the router and squid to see each other and troubleshoot the
GRE tunnel..
sh ip wccp shows hits.. but when I check the access.log and cache.log of
squid I
The firewall on the squid box might be blocking the traffic, either the GRE
traffic itself, or some other facet. Start by allowing all traffic in to the
box on the eth interface and the gre interface from both the IP from the router
identifier field, and the IP of the ethernet interface of the
Hi,
We are trying to get rid fo a commercial reverse proxy, how ever, we must get
this data from SNMP. I know that squid has snmp support, I've used, but I
dont know all oids. Does any one has a link where oids are specified?
Regards,
If you have snmp enabled, I would highly recommend setting up an instance of
cacti (http://www.cacti.net/)
If you have trouble understanding the Cacti installation, I would recommend
getting started with CactiEZ...it's an ISO that gets you up and going fast.
CactiEZ Download:
Yes. Multiple authentication methods, triggered from multiple sources,
going via multiple paths can be confusing.
Squid auth_param elided, which leaves:
A user name and password are being requested by ...
== basic challenge by ISA.
Enter user name and password for ...
==
I installed squid-3.0 STABLE11 and at first it is working smooth, but after 1
day the proxy is working very very slow and dying, I am getting an error
similar below. Can anybody help me on my problem please.
2009/01/16 22:42:47| WARNING: HTTP header contains NULL characters {Accept: */*
Wouldn't having a web-cache and another identifier 80 cause issues? Web-cache
is port 80.
What does your wccp2_service directive say, 80 or 0? W
What does your wccp ACL look like on your router/asa?
What does your wccp2_forwarding and wccp2_return method state? (this is your
communication over
░▒▓ ɹɐzǝupɐɥʞ ɐzɹıɯ ▓▒░ wrote:
i use crontab
*/30 * * * * /usr/bin/sarg -f /etc/squid/sarg.conf
but the sarg always display 2 lines
16Jan2009-16Jan2009 Fri Jan 16 07:30:01 EST 20097 82.28M 11.75M
15Jan2009-16Jan2009 Fri Jan 16 06:30:12 EST 200998 3.44G 35.13M
Andreev Nikita wrote:
Hi.
I'm trying to get basic squid info by issuing 'squidclient -p 8080
mgr:info'. Port 8080 is where our squid is listening to connections.
All clients works fine through the squid. But squidclient return http
response (lets say mydomain.com is my domain):
ERROR
The
bijayant kumar wrote:
Hello list,
I want to have reports about the squid performance like how much caching is being done by Squid, how much bandwidth is being saved by the squid cache by returning objects from cache. I thought of cache manager output but my seniors want to see reports in a less
Google is your friend, search for Squid+OID...the following were in the
top 10 results:
http://www.linofee.org/~jel/proxy/Squid/oid.shtml
http://www.oidview.com/mibs/3495/SQUID-MIB.html
Keep in mind that a lot of these OIDs will end in .1, .5 and .60 (for 1
min, 5 min and hourly
Andreev Nikita wrote:
Hi.
What are the reasons of squid rebuilding it's cache? Sometimes after
startup sometimes during work it starts to rebuild cache. I see it in
cahce.log:
Squid rebuilds the swap.state file when a logrotate (and I think
reconfigure) is called for. Usually it's not a
Luis Daniel Lucio Quiroz wrote:
Hi,
We are trying to get rid fo a commercial reverse proxy, how ever, we must get
this data from SNMP. I know that squid has snmp support, I've used, but I
dont know all oids. Does any one has a link where oids are specified?
Regards,
There is a MIB
Mark Barlow wrote:
Log all requests to port 80 and look for the PC/s that are
trying to access google constantly.
Especially at times when it's normally a lower load. At the school I
work for, lunchtime is pretty slow as pretty much everyone is off the
computers... And nights are obvious too
I have installed RHEL 5.1 and have the following result with the
following configurations.
Conf-A. ADSL Modem---Windows // It offers fast response
when connecting any website
Conf-B. ADSL Modem -- Linux-- Hub---Windows Client ... // Slow
response compared to Conf-A when
29 matches
Mail list logo