Hi.
I'm trying to set up an authentication scheme for Vista/W7, but haven't
succeed yet. Squid says squid_kerb_auth: gss_accept_sec_context()
failed: Miscellaneous failure (see text). failed to find
HTTP/proxy1.norma@norma.com(kvno 6) in keytab /etc/krb5.keytab.
To save time I listed
Squid Cache: Version 2.7.STABLE5
'allowed_websites.txt' is a text file, contains some websites that every
one can access.
'ipes.txt' is a text file, contains my LAN IPes.
'skype_servers_ip.txt' is a text file, contains almost 65 IPes of skype
servers. I found the skype IPes from squid log, and as
Long post - hope some of it makes sense / helps. By coincidence, I also have
just spent the last week trying to sort out a proxy.pac file that works for all
of our situations - Windows road-warriors that have to use our Squids from any
of our LANs, from VPN and direct from the Internet to our
Hi, a few of us dev's have been working on getting a build-test
environment up and running. We're still doing fine tuning on it but the
basic facility is working.
We'd love it if users of squid, both individuals and corporates, would
consider contributing a test machine to the buildfarm.
The
squid -z
FATAL: Bungled squid.conf line 3: cache_dir diskd /var/cache/squid 4096
16 256 64 72
Squid Cache (Version 2.7.STABLE5): Terminated abnormally.
what should I do ? where I am doing the mistake ?
Regards
--ms
Hi,
On Tue, Aug 18, Muhammad Sharfuddin wrote:
squid -z
FATAL: Bungled squid.conf line 3: cache_dir diskd /var/cache/squid 4096
16 256 64 72
Squid Cache (Version 2.7.STABLE5): Terminated abnormally.
what should I do ? where I am doing the mistake ?
the line should look something like
tis 2009-08-18 klockan 03:23 -0500 skrev Bill Allison:
For example, on a Windoze client (XP-SP3 at least) on VPN, the
javascript function myIPAddress() will return the IP address of the
*outside* of the tunnel
Yes, and a number of other similar situations as well.
My general recommendation
tis 2009-08-18 klockan 15:18 +0600 skrev Muhammad Sharfuddin:
squid -z
FATAL: Bungled squid.conf line 3: cache_dir diskd /var/cache/squid 4096
16 256 64 72
Squid Cache (Version 2.7.STABLE5): Terminated abnormally.
what should I do ? where I am doing the mistake ?
Bad syntax.
start with
Hi,
On Tue, 18 Aug 2009, Henrik Nordstrom wrote:
tis 2009-08-18 klockan 03:23 -0500 skrev Bill Allison:
For example, on a Windoze client (XP-SP3 at least) on VPN, the
javascript function myIPAddress() will return the IP address of the
*outside* of the tunnel
Yes, and a number of
Muhammad Sharfuddin wrote:
Squid Cache: Version 2.7.STABLE5
'allowed_websites.txt' is a text file, contains some websites that every
one can access.
'ipes.txt' is a text file, contains my LAN IPes.
'skype_servers_ip.txt' is a text file, contains almost 65 IPes of skype
servers. I found the
Experiencing strange problem with squid+icap+clam.
Downloading files, larger than 2GB failed. Turning on squid debugging
figure out following:
2009/08/18 12:17:26.420| comm_calliocallback: 0
2009/08/18 12:17:26.420| comm_calliocallback: 0
2009/08/18 12:17:26.420| commio_call_callback: called for
/etc/init.d/squid restart
* Restarting Squid HTTP proxy squid
2009/08/18 14:04:15| Invalid Proxy Auth ACL 'acl
AuthorizedUsers proxy_auth REQUIRED' because no authentication schemes
are fully configured.
FATAL: Bungled squid.conf line 39: acl AuthorizedUsers proxy_auth REQUIRED
Squid
If I have squid on server A and Web server B, I wish using squid Accelerator
on A to forward all requests to B. The requests are incoming from Internet
to Squid port 80 where Squid Accelerator should have to forward them to
machine B on port 8080.
Squid A works also as proxy server for my internal
Hello,
i trying to configure squid with chroot. When i start squid, i get the
following error message:
FATAL: MIME Config Table on//etc/squid3/mime.conf: (2) No such file or
directory
Squid Cache (Version 3.0.STABLE15): Terminated abnormally.
CPU Usage: 0.008 seconds = 0.008 user + 0.000 sys
Avinash Rao wrote:
/etc/init.d/squid restart
* Restarting Squid HTTP proxy squid
2009/08/18 14:04:15| Invalid Proxy Auth ACL 'acl
AuthorizedUsers proxy_auth REQUIRED' because no authentication schemes
are fully configured.
FATAL: Bungled squid.conf line 39: acl AuthorizedUsers
Bingo!!!
With
ignore_expect_100 on
the rest of Iphone clients works correctly.
Thanks Henrik
Regards,
Maurizio
From: hen...@henriknordstrom.net
To: hdyugoplast...@hotmail.com
CC: squid-users@squid-cache.org
Date: Mon, 17 Aug 2009 23:50:52 +0200
Jakob Curdes wrote:
Bear schrieb:
are you joking? This is a public mailing list. Whatever you send
here, is
public by definition.
It's just my sig, I didn't even think about it.
I often wonder who on earth has the idea that putting such a signature
on every single email leaving a company
I am having trouble getting squid 3.1 configured with icap and clamav.
I have it working with squid 3.0 but using the information on
http://wiki.squid-cache.org/Features/ICAP I just get ICAP
communication failed, nothing is getting logged in the icap logs so I
am fairly sure that it is a squid
Hello,
I try to purge request via HTTP with purge method. Squid cache
request with a vary tag.
To explain my problem, I have two request (Request A end Request B)
with the same url but with a variant. Getting result from cache for
Request A or Request B , every thing is ok.
I
tis 2009-08-18 klockan 17:02 +0200 skrev Riccardo Castellani:
If I have squid on server A and Web server B, I wish using squid Accelerator
on A to forward all requests to B. The requests are incoming from Internet
to Squid port 80 where Squid Accelerator should have to forward them to
machine
tis 2009-08-18 klockan 17:09 +0200 skrev Tom Penndorf:
i trying to configure squid with chroot. When i start squid, i get the
following error message:
FATAL: MIME Config Table on//etc/squid3/mime.conf: (2) No such file or
directory
Squid Cache (Version 3.0.STABLE15): Terminated abnormally.
The HQ office network is behind a Linux appliance running Squid in
transparent mode. All filtering / usage policies are enforced via
Dansguardian Squid.
When users go on the road with laptops, all usage should still go through
the Squid proxy back at the HQ. So I put the proxy settings in the
tis 2009-08-18 klockan 20:01 +0200 skrev Youenn Boussard:
I try to purge request via HTTP with purge method. Squid cache
request with a vary tag.
PURGE of Vary objects is still very poorly supported, and you can only
purge one variant at a time and need to get the URL cached again before
Gentlemen,
I realize that my question has morphed into a general SLES question, so
I won't keep this chain going forever. Here's my last question to you guys
before I start looking for outside help on our SLES 11 implementation (ie;
where in the World are the krb dev libs).
I searched
Hello
Using squid 2.6.STABLE21 Version.
I authenticate my users against active directory of windows. need to
add another server to possible technical failures, if no response from
the primary controller, then to consult a secondary.
is it possible?
Michel
Hello,
It's possible to :
1 - do a transparent authentication in windows with squid (ntlm or
kerberos).
2 - append an http header after that to a backend server with user
principal name (u...@domain) or an header domain\user ?
If you have sample configuration
tis 2009-08-18 klockan 15:42 -0400 skrev Daniel:
Gentlemen,
I realize that my question has morphed into a general SLES question,
so I won't keep this chain going forever. Here's my last question to
you guys before I start looking for outside help on our SLES 11
implementation (ie;
Henrik Nordstrom hen...@henriknordstrom.net wrote in message
news:1250627594.12999.2.ca...@henriknordstrom.net...
tis 2009-08-18 klockan 15:42 -0400 skrev Daniel:
Gentlemen,
I realize that my question has morphed into a general SLES question,
so I won't keep this chain going forever. Here's
On Tue, Aug 18, 2009 at 10:10 AM, John Andrunasj...@andrunas.net wrote:
I am having trouble getting squid 3.1 configured with icap and clamav.
I have it working with squid 3.0 but using the information on
http://wiki.squid-cache.org/Features/ICAP I just get ICAP
communication failed, nothing
John Andrunas wrote:
On Tue, Aug 18, 2009 at 10:10 AM, John Andrunasj...@andrunas.net wrote:
I am having trouble getting squid 3.1 configured with icap and clamav.
I have it working with squid 3.0 but using the information on
http://wiki.squid-cache.org/Features/ICAP I just get ICAP
twd wrote:
The HQ office network is behind a Linux appliance running Squid in
transparent mode. All filtering / usage policies are enforced via
Dansguardian Squid.
When users go on the road with laptops, all usage should still go through
the Squid proxy back at the HQ. So I put the proxy
tis 2009-08-18 klockan 12:07 -0700 skrev twd:
When users go on the road with laptops, all usage should still go through
the Squid proxy back at the HQ. So I put the proxy settings in the browsers,
lock the the settings so employees can't change them, and all works well,
UNTIL the laptop is
tis 2009-08-18 klockan 15:51 -0400 skrev mic...@casa.co.cu:
Hello
Using squid 2.6.STABLE21 Version.
I authenticate my users against active directory of windows. need to
add another server to possible technical failures, if no response from
the primary controller, then to consult a
tis 2009-08-18 klockan 22:06 +0200 skrev Youenn Boussard:
1 - do a transparent authentication in windows with squid (ntlm or
kerberos).
Yes.
2 - append an http header after that to a backend server with user
principal name (u...@domain) or an header domain\user ?
Yes.
Youenn Boussard wrote:
Hello,
It's possible to :
1 - do a transparent authentication in windows with squid (ntlm or
kerberos).
Yes.
2 - append an http header after that to a backend server with user
principal name (u...@domain) or an header domain\user ?
No. The
Understood and it worked.. You have been of great help.
Here's what i want to achieve from this..
I have about 40 samba users logging into the samba domain using winxp.
The squid and samba runs on the same server. This setup is for an NGO
- Educational Institute
and the students really misuse
A basic question. what is the use of installing squid in chroot, is
this something to do with ltsp?
On Wed, Aug 19, 2009 at 12:25 AM, Henrik
Nordstromhen...@henriknordstrom.net wrote:
tis 2009-08-18 klockan 17:09 +0200 skrev Tom Penndorf:
i trying to configure squid with chroot. When i start
37 matches
Mail list logo