Hi everyone,
I want to control the bandwidth of my network by limiting the download size
of a group of users at different times of a day. I googled and I found
SQUISH that can do this. Anyone have tested this tools before? I sent an
email to it's developers but there is no answer yet :-/ Is this
hosseinyounesi:
Hi everyone,
I want to control the bandwidth of my network by limiting the download size
of a group of users at different times of a day. I googled and I found
SQUISH that can do this. Anyone have tested this tools before? I sent an
email to it's developers but there is no answer
Jeff you can check it here ;
http://www.ledge.co.za/software/squint/squish/FAQ
hosseinyounesi:
Hi everyone,
I want to control the bandwidth of my network by limiting the
download size
of a group of users at different times of a day. I googled and I found
SQUISH that can do this. Anyone have
Jeff Pang wrote:
hosseinyounesi:
Hi everyone,
I want to control the bandwidth of my network by limiting the download
size
of a group of users at different times of a day. I googled and I found
SQUISH that can do this. Anyone have tested this tools before? I
sent an
email to it's developers
Ismail OZATAY:
Jeff you can check it here ;
http://www.ledge.co.za/software/squint/squish/FAQ
Sorry I did google it but lost this.
It seems squish is a web application that is based on Squid.
So I think squid itself will most probably implement the jobs asked by
the OP well.
--
Jeff Pang
On Tue, 2009-12-08 at 15:32 -0800, Guy Bashkansky wrote:
I've built squid with the -pg flag and run it in the no-daemon mode
(-N flag), without the initial fork().
I send it the SIGTERM signal which is caught by the signal handler, to
flag graceful exit from main().
I expect to see
Amos Jeffries:
Jeff Pang wrote:
hosseinyounesi:
Hi everyone,
I want to control the bandwidth of my network by limiting the
download size
of a group of users at different times of a day. I googled and I found
SQUISH that can do this. Anyone have tested this tools before? I
sent an
email to
This question is better answered by the Samba users group: Squid uses
the services of Samba for this task.
On 12/9/09, vikas rawat rawat.vi...@gmail.com wrote:
Hi,
I have sucessfully configure Squid Proxy on RHEL 5 with windows Active
directory Authentication and Grouping and it is working
Jeff Pang wrote:
Amos Jeffries:
Jeff Pang wrote:
hosseinyounesi:
Hi everyone,
I want to control the bandwidth of my network by limiting the
download size
of a group of users at different times of a day. I googled and I found
SQUISH that can do this. Anyone have tested this tools before? I
Hi again,
No one has answered me yet :(
for squish, chekc http://www.ledge.co.za/software/squint/squish/ this out.
As I said in previous question, I want to control A GROUP of USERS download
size. Any way to do this with squid and it's addons? any other way/tool?
Thanks a lot :D
--
View
Amos Jeffries squ...@treenet.co.nz writes:
On Tue, 08 Dec 2009 15:31:07 +0100 (CET), Ludovit Koren
ludovit_ko...@tempest.sk wrote:
Amos Jeffries squ...@treenet.co.nz writes:
On Mon, 07 Dec 2009 17:59:22 +0100, Ludovit Koren
ludovit_ko...@tempest.sk wrote:
Hi,
I have Debian Linux and
Hi people
I having troubles with my two server.
Server A - PDC with SAMBA LDAP Works Fine.
Server B - Squid without SAMBA LDAP.
I need to autenticated all users that has web Access and is login on PDC but
it's not working.
The Server B tell me this:
2009/12/09 05:16:42| Reconfiguring Squid
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi,
I'm already using LDAP authentication and the
company I work for tries to put a lot of authentication
and authorization (meta-)information inside LDAP.
This week, we were wondering if it is possible
to use LDAP as a backend for
Hi!
Sure: the DN syntax that squid is sending to the LDAP is invalid.
without your config, there is nothing more I can say (for me: it just
worked!).
I hope this helps,
Ildefonso Camargo
On Wed, Dec 9, 2009 at 8:57 AM, Dominguez, Gaston Matias
gdoming...@eling.com.ar wrote:
Hi people
I
Hello,
Would appreciate your help with my Ubuntu EC2 instance Squid
configuration. Until recently I had a single dedicated Fedora server
for my development needs. Currently I am trying to migrate to Amazon
EC2 based Ubuntu Hardy Heron instance for my server requirements.
Background:
- Single
Is there an oprofile version for FreeBSD? I thought it is limited to
Linux. On FreeBSD I tried pmcstat, but it gives an initialization
error.
My version of Squid is old and customized (so I can't upgrade) and may
not have builtin timers. Since what version did they appear?
As for gprof - even
I have a squid 2.7 box, configured as transparent with wccp2 router
configured. ACL's are wide open for the whole 10.0.0.0/8 network. My WCCP2
router is a Cisco 6509 with a Sup32 running IOS.
The squid works fine if I add it in the browser on port 3128, but if I take
it out, internet stops
Hi,
you can use squid's delay pool feature to accomplish your task! They
work like a charm provided following is true:
your squid is build with delay-pool options (squid can show this by
running squid -v command on CLI)
your understand very well the delay pool structure of classes
Hi,
I need an expert opinion on best suitable setup for my requirement. I am
running shorewall 4.4 on RHEL 5 for NATTING/FIREWALLING. I've installed
SQUID-3.0STABLE20-1 on that same machine as well. Shorewall is
REDIREC-ing port 80 traffic to squid. Currently Squid was running in
transparent
Update - Changed the remote end of the gre tunnel to the router identifier IP
of the 6509 which is routeable from the gateway of the squid box - still not
working
--
View this message in context:
On Wed, 09 Dec 2009 13:42:47 +0100 (CET), Ludovit Koren
ludovit_ko...@tempest.sk wrote:
Amos Jeffries squ...@treenet.co.nz writes:
On Tue, 08 Dec 2009 15:31:07 +0100 (CET), Ludovit Koren
ludovit_ko...@tempest.sk wrote:
Amos Jeffries squ...@treenet.co.nz writes:
On Mon, 07 Dec 2009
On Wed, 09 Dec 2009 12:34:42 -0200, Felipe Augusto van de Wiel
felipe.w...@hpp.org.br wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi,
I'm already using LDAP authentication and the
company I work for tries to put a lot of authentication
and authorization
hosseinyounesi wrote:
Hi again,
No one has answered me yet :(
for squish, chekc http://www.ledge.co.za/software/squint/squish/ this out.
As I said in previous question, I want to control A GROUP of USERS download
size. Any way to do this with squid and it's addons? any other way/tool?
Felipe Augusto van de Wiel wrote:
Hi,
I'm already using LDAP authentication and the
company I work for tries to put a lot of authentication
and authorization (meta-)information inside LDAP.
This week, we were wondering if it is possible
to use LDAP as a backend for acl lists.
Asim Ahmed @ Folio3 wrote:
Hi,
I need an expert opinion on best suitable setup for my requirement. I
am running shorewall 4.4 on RHEL 5 for NATTING/FIREWALLING. I've
installed SQUID-3.0STABLE20-1 on that same machine as well. Shorewall
is REDIREC-ing port 80 traffic to squid. Currently Squid
On Thu, 10 Dec 2009 01:55:48 +0500, Asim Ahmed @ Folio3
aah...@folio3.com wrote:
Hi,
FWIW, what you are talking about is NAT interception, not true
transparency.
I'm trying to get people to clean up the talk since Squid-3 is now moving
towards true 'tproxy' transparency plus NAT interception
I think that the router's okay and your squid needs adjustment.
My system only has one GRE device, not two.
iptables -t nat -nvL has
3499K 197M DNAT tcp -- wccp0 * 0.0.0.0/00.0.0.0/0
tcp dpt:80 to:203.15.226.132:3128
95 4592 REDIRECT tcp --
On Wed, 9 Dec 2009 08:01:59 -0800, N ng.s...@gmail.com wrote:
Hello,
Would appreciate your help with my Ubuntu EC2 instance Squid
configuration. Until recently I had a single dedicated Fedora server
for my development needs. Currently I am trying to migrate to Amazon
EC2 based Ubuntu Hardy
On Wed, 9 Dec 2009 09:57:52 -0800, Guy Bashkansky guy...@gmail.com
wrote:
Is there an oprofile version for FreeBSD? I thought it is limited to
Linux. On FreeBSD I tried pmcstat, but it gives an initialization
error.
My version of Squid is old and customized (so I can't upgrade) and may
Talk to the freebsd guys (eg me) about pmcstat and support for your
hardware. You may just need to find / organise a backport of the
particular hardware support for your platform. I've been working on
profiling Lusca with pmcstat and some new-ish tools which use and
extend it in useful ways.
Hi
I use actually Squid with NTLM authentication, that work very good with XP
We have tested our configuration with Windows 7, and authentication
don't work.
My config:
Squid 3.0-Stable7
Winbind/Samba 3.2.0-1
conf:
auth_param ntlm program /usr/bin/ntlm_auth
Dear Sirs,
I have attached the necessary files that asked for. Please help me in
this issue.
I am waiting to hear from you.
Thanks and Regards,
Sankar.M
-- Forwarded message --
From: sankar m debianlinux...@gmail.com
Date: Fri, Nov 13, 2009 at 12:45 PM
Subject: Re: [Bug 2805]
32 matches
Mail list logo
