Date: Thu, 23 Sep 2010 03:49:06 +1200
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Utorrrent through squid
On 22/09/10 22:43, GIGO . wrote:
So Amos does this means that downloading of torrents with earlier version of
squid is not possible at all
Hi all,
I am unable to run utorrent software through squid proxy due to ipv6 tracker
failure.I am unable to connect to an ipv 6 tracker.
1285141356.609152 10.1.97.27 TCP_MISS/504 1587 GET
http://ipv6.torrent.ubuntu.com:6969/announce? - DIRECT/ipv6.torrent.ubuntu.com
text/html [Host:
] Utorrrent through squid
On 22/09/10 19:56, GIGO . wrote:
Hi all,
I am unable to run utorrent software through squid proxy due to ipv6 tracker
failure.I am unable to connect to an ipv 6 tracker.
1285141356.609 152 10.1.97.27 TCP_MISS/504 1587 GET
http://ipv6.torrent.ubuntu.com:6969
when cache Peer is used.
On 17/09/10 23:14, GIGO . wrote:
I have configured my proxy servers in two regions for backup internet path
of each other by declaring the following directives.
Directives on Proxy A:
cache_peer A parent 8080 0 proxy-only
prefer_direct on
nonhierarchical_direct
I have configured my proxy servers in two regions for backup internet path of
each other by declaring the following directives.
Directives on Proxy A:
cache_peer A parent 8080 0 proxy-only
prefer_direct on
nonhierarchical_direct off
cache_peer_access A allow all
Directives on Proxy B:
Dear All,
I am using squid 2.7 stable 9 version the facebook was working fine since
yesterday and suddenly the issue appears that a blank page comes whenever tried
to access facebook. I have tried the recommended directive
server_http11 on
But the problem is unresolved please help.
Dear All,
Is it possible to use squid as backup path if going direct fails? i am using
squid 2.7 stable 9 with cache_digest enabled. Follwoing are the directives i
think will do it please check them if they are correct?
Setting of cache at North Region:
cache_peer SOUTH parent
Date: Sat, 24 Jul 2010 14:06:37 +1200
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Delay Pool Configuration Confirmation.
GIGO . wrote:
Right Amos i think what i want was the class 2 so i will configure as you
suggest
Dear all,
I am using squid 2.7 stable 9. I want to restrict downloads for every one both
authenticated and IP based clients to 128KB at the day time and with full
capacity at night. I have done the following configurations however they dont
seem to work for me. Can you confirm that if they
Subject: Re: [squid-users] Delay Pool Configuration Confirmation.
GIGO . wrote:
Dear all,
I am using squid 2.7 stable 9. I want to restrict downloads for every one
both authenticated and IP based clients to 128KB at the day time and with
full capacity at night. I have done the following
Dear All,
I am having lot of such errors please your help and guidance is required.
2010/07/20 17:26:34| clientCacheHit: request has store_url
'http://www.cricinfo.com/navigation/cricinfo/ci/scorecard.css'; mem object in
hit has mis-matched url
Dear All,
I am seeing the following in my cache.log. Is this refering to some
misconfiguration or issue ?
2010/07/19 17:58:20| clientCacheHit: request has store_url
'http://cdn.nytimes.com/images/apps/timespeople/none.png'; mem object in hit
has mis-matched url
Amos,
Thank you. I will do as per your advice.
regards,
Bilal
Date: Fri, 16 Jul 2010 13:43:17 +1200
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] swapfile header too small
GIGO . wrote:
Dear All,
I
Dear All,
I am finding this in my cache.log file.
2010/07/15 19:12:14| WARNING: swapfile header too small
2010/07/15 19:12:14| WARNING: swapfile header too small
2010/07/15 19:28:30| WARNING: swapfile header too small
squid 2.7 stable 9 installed on RHEL
What is the reason of these
I am using ISA as a parent peer and have squid has no direct connection to
internet
I am unable to use IDM with Squid proxy i have both tried with Authenticated as
well as IP based client but its not being successful.Another download manager
(FDM) works fine with the same setup
Error is
. If they
have the same access right you can use -g
inetgrl...@mailserver.v.local:inetgrl...@mailserver.v.local:inetgrl...@mailserver.v.local
Regards
Markus
- Original Message -
From: GIGO .
To: squidsuperuser2 ; SquidHelp
Sent: Thursday, July 01, 2010 11:31 AM
Subject: RE: [squid-users
and squid_kerb_ldap to
create more debut output and send the cache.log extract
Regards
Markus
GIGO . wrote in message
news:snt134-w34626d5c8ec65f9d8495b1b9...@phx.gbl...
Hi Henrik/Markus/All
Every setting(keeping in view your recommendation) was correct i many a
times confirmed that.Even i tried re
-cache.org
Subject: Re: [squid-users] Startup/shutdown script which was working
perfactly alright for squid 3.0stable25 is not working for squid 2.7 stable9.0
GIGO . wrote:
Hi all,
I am able to run squid manually however whenever i try to run it through the
startup/shutdown script it fails
: squid_kerb_auth (parseNegTokenInit failed with
rc=102)
Make sure the squid servers hostname matches squidhr1.v.local. If not use -s
HTTP/squidhr1.v.local as an option to squid_kerb_auth.
Regards
Markus
GIGO . gi...@msn.com wrote in message
news:snt134-w64257c53609757cd3cf006b9...@phx.gbl
Dear All,
Your help is required.
Problem: Setting up squid in an Active Directory environment. (where Active
Directory domain controllers, Windows clients, UNIX clients, and application
servers must all have a shared understanding of the correct host names and IP
addresses for each
Date: Wed, 16 Jun 2010 23:11:08 +1200
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Confusion regarding regex
GIGO . wrote:
Hi,
Please need your guidance regarding the regex used by squid. Is it bre ere
or perl? I assume that squid
+ skrev GIGO .:
Hi Amos,
There is still some confusion regarding regex and any help will be great
please.
you told that squid uses posix regex but is it BRE or ERE???
Extended.
as for ERE according to my best understanding special characters are
not required to be escaped
Hi,
Please need your guidance regarding the regex used by squid. Is it bre ere or
perl? I assume that squid using a gnurep compatible version? Am i right?
In grep to use some metacharacter we have to encode it which are ‘\?’, ‘\+’,
‘\{’, ‘\|’, ‘\(’, and ‘\)’ does this hold true to write
23:11:08 +1200
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Confusion regarding regex
GIGO . wrote:
Hi,
Please need your guidance regarding the regex used by squid. Is it bre ere
or perl? I assume that squid using a gnurep compatible version? Am i
] Youtube -An error occured, please try again later
GIGO . wrote:
Hi henrik,
Right now i don't have my access.log. (will share it with you after the
weekend) However let me tell you that after setting the negative_ttl to 0.
Apparently the problem was resolved. But i need to be sure about
My store.logs are following
1275025642.358 SWAPOUT 00 8152 04FD0DB17EE9789F06B1386F1D6CDA4D 200
1275025483 1234793502 1275047700 video/x-flv 5142132/5142132 GET
:
On Fri, 28 May 2010 06:15:32 +
GIGO . wrote:
My store.logs are following
A. Because people read from top to bottom.
Q. Why should I not top post?
Ah, fun...
you know.
sdrawkcab daer lla tnac ew
so please dont
posting above the reference
what is top posting?
and my
,
Bilal
Subject: Re: [squid-users] Youtube -An error occured, please try again later
From: hen...@henriknordstrom.net
To: gi...@msn.com
CC: squid-users@squid-cache.org
Date: Fri, 28 May 2010 18:53:19 +0200
fre 2010-05-28 klockan 05:33 + skrev GIGO
-cache.org
Subject: Re: [squid-users] Running Multiple instances and reporting confusion.
GIGO . wrote:
Hi all,
I am running multiple instances of squid on the same machine. One
instance is taking the clients request and forwarding to its parent
peer at 127.0.0.1. All is going well. However
Hi all,
For some of my youtube videos i am getting the following error.
An error occured, please try again later.
I have confirmed that this only occur when squid is being used. find below the
relevant information in this regard.
cache_dir aufs
Hi all,
I request that please read my squid.conf file and guide me on the order of the
directives and any issue as i am unable to cache a single thing. Does it matter
the order of definition of the following?
1. storeurl program
2. refresh patterns
3 storeurl rewrite lists...
I assume :
Hi all,
Please guide about runcache script behaviour uptil now i have only understood
this that this script will check and autorestart squid in case of failure. I
also assume that this script should be registered with init.d for
startup/shutdown. Where is this script located?(2.7 version).
Hi all,
I am able to run squid manually however whenever i try to run it through the
startup/shutdown script it fails. This is the same script working for squid 3.0
stable 25 however i am not being able to figure out that why its failing on
squid 2.7 stable 9? Neither of the instance starts
Hi All,
can it be said as a generalization that one can allocate/fix 1/4 of physical
ram for cache mem objects. Will it holds true even when you are running
multiple instances???
please guide that how memory handling will be occuring in multiple instances
setup???cache_mem will
instances of squid on the same server.
fre 2010-05-21 klockan 06:38 + skrev GIGO .:
can it be said as a generalization that one can allocate/fix 1/4 of
physical ram for cache mem objects. Will it holds true even when you
are running multiple instances???
I would not generalize a rule
Hi all,
Does squid_kerb_auth squid_kerb_ldap work fine in squid 2.7 like squid 3.x.
Are these the correct options?
./configure *...*--enable-basic-auth-helpers=LDAP
--enable-auth=basic,negotiate,ntlm
--enable-external-acl-helpers=wbinfo_group,ldap_group
:52 + skrev GIGO .:
Does squid_kerb_auth squid_kerb_ldap work fine in squid 2.7 like squid 3.x.
Yes.
./configure *...*--enable-basic-auth-helpers=LDAP
--enable-auth=basic,negotiate,ntlm
--enable-external-acl-helpers=wbinfo_group,ldap_group
--enable-negotiate-auth-helpers
increase the
security of your proxy server.
But you will need to build a policy module for squid_kerb_auth witch
is not currently supported by selinux policy on redhat-like systems.
What distrib do you use ?
Tiery
On Wed, May 19, 2010 at 6:17 AM, GIGO . wrote:
Thank you i will give
Hi All,
I was running multiple instances of squid 3.0 Stable 25 on the same server
successfully. However i intend to run squid 2.7 3.1.3 on the same server now
reason being 2.7s enhance support of dynamic content caching. (Earlier the main
intention to use multiple instances was to give
Hi all,
When i change SELINUX from permissive mode to Enforcing mode. My multiple
instance setup fail to start. Please guide how to overcome this.
---Excerpts from cache.log-
2010/05/18 10:31:51| TCP connection to 127.0.0.1/3128 failed
2010/05/18
Dear All,
Your guidance is required. Please help.
It looks that squid process run by default as a confined process whether its a
compiled version or a version that come with the linux distro. It means that
the squid software is SELINUX aware.Am i right?
[r...@squidlhr ~]# ps -eZ | grep
Hi all,
I am running multiple instances of squid on the same machine. One instance is
taking the clients request and forwarding to its parent peer at 127.0.0.1. All
is going well. However there is a confusion related to reporting through sarg.
To capture the client activity sarge is parsing
| audit2allow
You can also try to restore selinux context for all squid files:
restorecon -R /etc/squid
restorecon -R /var/log/squid
etc...
or touch /.autorelabel and reboot
Tiery
On Tue, May 18, 2010 at 9:47 AM, GIGO . wrote:
Dear All,
Your guidance is required. Please help.
It looks
context (with restorecon or .autorelabel and reboot).
But i am not sure modifing this file is the best way.
It you update your selinux policy, changement will not be persistent.
I think it is better to build a selinux module for our squid.
Tiery
On Tue, May 18, 2010 at 2:34 PM, GIGO . wrote
2010-05-18 klockan 06:02 + skrev GIGO .:
2010/05/18 10:31:52| storeLateRelease: released 0 objects
2010/05/18 10:31:52| TCP connection to 127.0.0.1/3128 failed
setsebool -P squid_connect_any true
should help there.
Regards
Henrik
Hi All,
Your guidance is required regarding compilation.
I had compiled squid-3.0.STABLE25 with the following options:
./configure --prefix=/usr --includedir=/usr/include --datadir=/usr/share
--bindir=/usr/sbin --libexecdir=/usr/lib/squid --localstatedir=/var
--sysconfdir=/etc/squid
Dear all,
never_direct/always_direct
Why two directives had to be created while one directive could have done the
trick? Please guide
regards,
Bilal
_
Hotmail: Free, trusted and rich
Caching/Windowsupdate/Facebook/youtube
GIGO . wrote:
All,
I am really sorry i was looking at the access.log file of squid instance
that is user facing and not the instance that is doing the fetching/caching
and there i can see mp4 files being cached. However i am not very much
confident
Dear All,
I require your help and guidance regarding dynamic content caching. Following
are the quries.
1. I am running squid in multiple instances mode (For Cache Disk Failure
Protection). I dont think that it has any effect on internet object caching? I
am confused that if connect
All,
I am really sorry i was looking at the access.log file of squid instance that
is user facing and not the instance that is doing the fetching/caching and
there i can see mp4 files being cached. However i am not very much confident
about my settings so please read my queries and the
Hi all,
Can anybody please explain me what does this error mean and why it occurs it
happens while i was testing youtube/facebook caching.
TCP_NEGATIVE_HIT/204
Does this suggest that some object in cache has corrupted? if so how to rectify
the error?
Is this error only means that
Dear All,
I want to confirm that my youtube/facebook and windowsupdate are being cached
as i configured. How to have this assurity. Further i wish to view what are the
contents of my cache. Please guide in this respect.
Thanking you
regards,
Bilal
Hi,
I start squid in the normal mode as following:
/usr/sbin/squid -D -f /etc/squid/squid.conf
Could there be any benefit achieved running it in a deamon mode. Can please
somebody guide in detail
Thanking in advance
regards,
Bilal
Dear All,
Is it safe enough to use Automatic yum updates on the squid Server
machine? Is there any strict package version requirements to have those
with which squid was already installed.
Automatic updates will even upgrade kernel as well so is it ok?
Please your guidance
Hi,
What is the behaviour/mechanism of authentication if using squid proxy for both
as forward proxy and reverse proxy.
I have successfully setup it for a forward proxy using the Helper files by
Markus and the following tutorial;
Dear All,
The problem under discussion is a continutity of SPN creation/Single Forest
MultiDomain (Active Directory) topic.
@ Markus
Yes my infrastructure is Active Directory based (Root Forest Directory A with
two child domains B (80 % users) C (20 % users) in their own trees). Only
Dear Markus/All,
Please guide me on the matter discussed below:
Single Forest Multiple Domain setup
A
/ \
/ \
BC
Problem:
Single FOrest Multiple domains where as Root A is empty
Dear Markus/Nick/All,
After a great struggle and help (i got from you people)i was managed to resolve
the issue however i have few confusions which i wish you to ask please.
1. First of all I traced down my problem to SPN Names casesensitivity the case
for ServicePrincipalName attribute
I get the following error whenever i try to use squid: (currently i am trying
to use it from the AD which is also the KDC for squid to provide
authentication.)
Access Denied:
Access control configuration prevents your request from being allowed at this
time. Please contact your service
.
Nick
On 16/04/2010 08:43, GIGO . wrote:
Dear Nick/Markus,
I am totally lost in translation and am not sure what to do i need your help
please. The problem is that my kerberos authentication is not working. In my
virtual environment i have two machines one configured as Domain
the browser is returning a NTLM token not a Kerberos token whu
squid_kerb_auth will deny access.
Regards
Markus
GIGO . gi...@msn.com wrote in message
news:snt134-w155de8e05828b08d15c09ab9...@phx.gbl...
Dear Nick,
This was the result of my klist -k command:
[r...@squidlhrtest log
account
of the UnixAdministrators to it. Finally I change the permissions on the
OU=UnixPrincipals so that the members of the group UnixAdministrators have
full rights (or limited rights ) for objects under this OU.
Regards
Markus
GIGO . wrote in message
news:snt134
/ spn upn and
not just the domain. Also check your DNS and host local host entries.
E.g.: msktutil -c -b CN=COMPUTERS -s HTTP/squid1.[mydomain] -k
/etc/squid/HTTP.keytab --computer-name auth1 --upn HTTP/squid1 --server dc1
-verbose
Nick
On 15/04/2010 07:22, GIGO . wrote:
Dear Markus
Dear All,
Once again i failed to properly create keytab. Following is the detail of how i
performed this task
step No 1: i changed my krb5.conf file as follows;
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/kadmind.log
2010-04-14 klockan 04:47 + skrev GIGO .:
Hi Henrik,
Thank you this problem is resolved by placing the squid_kerb_auth in
the libexec folder. Now i beleive that i also have to place any other
helpers like squid_ldap_group in the same location to get it to work.
Yes. if you have selinux
When you upgrade is it possible to use the existing cache directories created
through previous version(squid 3) or you have to rebuild your cache.
regards,
Bilal Aslam
_
Hotmail: Trusted
: hen...@henriknordstrom.net
To: gi...@msn.com
CC: squid-users@squid-cache.org
Date: Sat, 10 Apr 2010 19:44:31 +0200
Subject: Re: [squid-users] ipcCreate error:
lör 2010-04-10 klockan 09:23 + skrev GIGO .:
I have created a user proxy in Centos from which i am running my squid
successfully
Authorizing users via LDAP group:
It is listed in the squid_ldap_group man page that using -D binddn -W secret
fle is to be preferred on -D binddn -w password. While it provides extra
security then printing the password in plaintext inside squid.conf. Doesnt this
query itself go in clear
I have created a user proxy in Centos from which i am running my squid
successfully with all the rights properly configured until i change my
configuration file for Negotiate/Kerboros.
I am receiving the following error when trying to start squid:
2010/04/09 05:06:12| helperOpenServers:
this? Happy to
discuss any of this off list or on.
Cheers,
Nick
On 08/04/2010 04:06, GIGO . wrote:
If i select negotiate/Kerberos as authentication protocol for my Squid on
Linux and configure no FallBack Authentication.what would be the consequence ?
1. Isnt it that all of my users who
regenerated. Have you experienced this? Happy to
discuss any of this off list or on.
Cheers,
Nick
On 08/04/2010 04:06, GIGO . wrote:
If i select negotiate/Kerberos as authentication protocol for my Squid on
Linux and configure no FallBack Authentication.what would be the consequence
?
1
down-side to Kerberos is that it's an
all-or-nothing service, either you use Kerberos and only Kerberos or
you risk security breaches in any mixed situation.
HTH
Khaled
2010/4/6 GIGO . :
Dear All,
Please guide me in regard to SSO setup with Active Directory(No
winbind/Samba). I have
If i select negotiate/Kerberos as authentication protocol for my Squid on Linux
and configure no FallBack Authentication.what would be the consequence ?
1. Isnt it that all of my users who have logged into Active Directory and where
browser is supported will be able to use squid?
2.
Dear All,
Please guide me in regard to SSO setup with Active Directory(No winbind/Samba).
I have the following questions in this regard.
1. Creating a Kerberos service principal and keytab file that is used by the
Squid what is the effective method? Difference between using Ktpass vs
think it will depend on your environment.
Regards
Markus
GIGO . wrote in message
news:snt134-w101cbed44254f957cda154b9...@phx.gbl...
Dear Markus,
Please i have few confusions which i want to satisfy.
1. If kerberos Authentication fails then what would be the fallback behavior
would
Hi All,
In our environment currently we are using ISA server with userbased
authentication. we are using windows 2003 Active Directory and almost all of
the users are using Windows based OS. We want to seemlessly migrate our users
to Squid.
I have not yet reached to any conlusion despite lot
with Active Directory-Squid Clients
Have a look at
http://wiki.squid-cache.org/ConfigExamples/Authenticate/Kerberos and
http://sourceforge.net/projects/squidkerbauth/files/squidkerbldap/squid_kerb_ldap-1.2.1/squid_kerb_ldap-1.2.1.tar.gz/download
Regards
Markus
GIGO . wrote in message
news:snt134
Dear All/Amos,
I want to allow certain(not all) Active Directory users to use squid by way of
SSO with Active Directory. So means when any one from those specific users will
login into Active Directory they should have automatically access to internet
via Squid Proxy. Other AD users which
Is it possible to upgrade from Squid3.0 to Squid3.1.1 by applying patch/diff.
Is there any howto available which can be refered to? Should every body
upgrade?
_
Hotmail: Trusted email with
Date: Tue, 30 Mar 2010 17:05:50 +1300
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] HTTP_Miss/200,304 Very Slow responsetime. Experts
please help.
GIGO . wrote:
I am using ISA server as cache_peer parent and runing multiple instances on
my squid
Is there a trick to trace cache_hits and Cache_misses in SARG and in more
readable format.Also in detail and summarized form that how much data has been
came through the cache.or i have to use someother tool and which?
what is the best reporting tools to use for squid.Can someone give a
I am using ISA server as cache_peer parent and runing multiple instances on my
squid Sever. However i am failing to understand that why the behaviour of Squid
is extremely slow. At home where i have direct access to internet the same
setup works fine.Please somebody help me out
regards,
Very Slow responsetime. Experts
please help.
GIGO . wrote:
I am using ISA server as cache_peer parent and runing multiple instances on
my squid Sever. However i am failing to understand that why the behaviour of
Squid is extremely slow. At home where i have direct access to internet
I want that if my first listed cache peer goes down then only should my second
peer be used.
-
cache_peer 127.0.0.1 3128 0 default no-digest no-query no-delay (only if this
is unavailable then the second one listed is used)
cache_peer 10.1.82.205 8080 0 default proxy-only
What is the meaning of Rebuilding storage in /var/spool/squid3 (DIRTY).
regards,
_
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
Subject: Re: [squid-users] SquidCompilationproblem -squid_ldap_auth.c:123:18:
error: lber.h: No such file or directory
On Sun, 21 Mar 2010 19:37:56 +, GIGO . wrote:
Please guide me on this whats wrong. I am unable to compile
Squid3stable24 on Ubuntu 8.04 LTS server.
I want to use
DearAll,
Please help me on this as after setting up multiple instances on the same
server for (cache Directory fault tolerance myy squid speed/response is
extremely slow and even most of the sites keep on opening and opening. I am
failing to figure out whats wrong. Please guide me on this i
Please I want to add information for my previous query. My previous setup with
single instance was running fine.Another change is that i compiled my new setup
with more options this time like enabling delay pools , cache digest and active
directory authentication support. Is the below issue in
From the multiple instance setup using Squid 3stable25 i have shifted to
squid3stable1 packaged with ubuntu 8.04 LTS.However i am unable to understand
why its too much slow. Whats wrong please anybody help out.Is it something to
do with Operating system? Or initially Squid runs that much slow?
: Re: [squid-users] Peering squid multiple instances.
GIGO . wrote:
I have successfully setup running of multiple instances of squid for the
sake of surviving a Cache directory failure. However I still have few
confusions regarding peering multiple instances of squid. Please guide me
I want to do the security hardening of my Squid Server with Iptables. I intend
to have no rule on outbond traffic however ibound traffic would be restricted.
please guide what are the minimum ports that are required to be open on
iptables.
Following is what i thought:
Allow all incoming
purpose:
To authenticate squid users through active directory before allowing them
access to internet.
Compile Options:
./configure --prefix=/usr --localstatedir=/var --libexecdir=${prefix}/lib/squid
--srcdir=. --datadir=${prefix}/shares/squid --sysconfdir=/etc/squid3
I have successfully setup running of multiple instances of squid for the sake
of surviving a Cache directory failure. However I still have few confusions
regarding peering multiple instances of squid. Please guide me in this respect.
In my setup i percept that my second instance is doing
Please guide me on this whats wrong. I am unable to compile
Squid3stable24 on Ubuntu 8.04 LTS server.
I want to use active directory authentication(my clients should be able to
authenticate themselves with active directory accounts) Following is my command:
./configure
On a compiled squid3 stable24. I am unable to run squid as root in Ubuntu. So
the cache_effective_user defined in squid.conf never comes into play. Is this a
security concern? what good is cache_effective_user for?
Is it right to run squid with the default ubuntu user one has installed
considerations
GIGO . ha scritto:
Well i want to make sure that my settings are optimized and want to
learn more about the cache_dir settings.let me come in details
Gigo,
you are asking a lot of questions all at once.
This is a volounteer-based support list, so your chances of getting
Dear henrik,
If you have only one physical machine what is the best strategy for miminmizing
the downtime and rebuild the cache directory again or start utilizing the squid
without the cache directory? I assume we have to reinstall the Squid Software?
Please guide
I installed ubuntu server as u-admin account. I have set the directive:
cache_effective_user to squidadmin. However my squid process keep on running
as b-admin account. And my cache_effective user never comes into play.
As per a guide which described that squid will only shift to the defined
How to setup squid proxy to run in fail-over mode? Any guide.
regards,
Bilal Aslam
_
Hotmail: Powerful Free email with security by Microsoft.
https://signup.live.com/signup.aspx?id=60969
@squid-cache.org
Date: Thu, 18 Mar 2010 09:54:34 +0100
Subject: RE: [squid-users] Squid cache_dir failed - can squid survive?
tor 2010-03-18 klockan 06:16 + skrev GIGO .:
Dear henrik,
If you have only one physical machine what is the best strategy for
miminmizing the downtime and rebuild
1 - 100 of 119 matches
Mail list logo