RE: [squid-users] Getting error Too few basicauthenticator processes are running

--- Chris Robertson [EMAIL PROTECTED] wrote: -Original Message- From: ads squid [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 09, 2005 3:42 AM To: squid-users@squid-cache.org Subject: [squid-users] Getting error Too few basicauthenticator processes are running

RE: [squid-users] Getting error Too few basicauthenticator processes are running

/etc/passwd' Type 'USERNAME PASSWORD' And see what it says - I suspect you wont get that far though. Once you try run it it should giv eyou and error -Original Message- From: ads squid [mailto:[EMAIL PROTECTED] Sent: 10 November 2005 09:40 AM To: Chris Robertson; squid-users

[squid-users] Getting error Too few basicauthenticator processes are running

Hi, I am trying to configure squid version squid-2.5.STABLE12 as follows : [EMAIL PROTECTED] squid-2.5.STABLE12]# /usr/local/squid/sbin/squid -NCd1 I am getting following error 2005/11/09 18:03:40| Accepting HTTP connections at 0.0.0.0, port 3128, FD 15. 2005/11/09 18:03:40| WCCP Disabled.

Re: [squid-users] Re: Squid access.log problem.

. Thanks for support. --- Adam Aube [EMAIL PROTECTED] wrote: ads squid wrote: I am using squid 2.5 STABLE on Redhat Linux 9 working fine. I am using squid access logs file with SARG for getting user reports. SARG report IN-CACHE-OUT shows me total 1132 MB which is based on squid

[squid-users] Squid access.log problem.

Hi, I am using squid 2.5 STABLE on Redhat Linux 9 working fine. I am using squid access logs file with SARG for getting user reports. My ISP (bandwidth supplier) have given me control panel which shows that data dowmload is about 250 MB and Upload about 3500 MB. Total 3750 MB. SARG report

[squid-users] Number of users currecntly connected?

Hi, I am using squid Version 2.5.STABLE7 on Redhat 9.0 working O.K. Is there any way I can find out how many users are currently connecte to squid. It should give dynamic status of cunnected users. OR If squid can not do this, is there any open source utility which do this ? Thanks for support.

[squid-users] ERROR : While trying to retrieve the URL:

I am running squid Version 2.5.STABLE6 on Redhat Linux 9.0. Squid is running on Gateway. DNS, Web server are running on DMZ. Everything was working smoothly so far. Suddenly It started giving following error when try to click on URL on the web page of site hosted on DMZ server. The

[squid-users] error:request-too-large

Hi, I am using squid squid-2.5.STABLE7 on Redhat Linux 9.0 working O.K. I am getting following error in log file 1103030629.354 0 192.168.0.93 NONE/413 1572 NONE error:request-too-large - NONE/- text/html 1103030629.498 0 192.168.0.93 NONE/413 1572 NONE error:request-too-large - NONE/-

RE: [squid-users] Getting 'clientReadRequest: FD 16 Invalid' error.

I can not ignore this error. It slows down browsing speed. When I stop squid again Internet browsing speed comes to normal. I am posting some more information. Follwoing are error in cache.log file 2004/11/03 16:05:41| Config 'request_header_max_size'= 15360 bytes. 2004/11/03

[squid-users] Getting 'clientReadRequest: FD 16 Invalid' error.

Hi, I am getting following error. Don't know why? 2004/11/01 17:10:28| clientReadRequest: FD 45 Invalid Request 2004/11/01 17:15:28| clientReadRequest: FD 22 Invalid Request 2004/11/01 17:20:28| clientReadRequest: FD 38 Invalid Request 2004/11/01 17:25:28| clientReadRequest: FD 21

[squid-users] Need some clarification about delay pools features.

Hi, I am using delay pools with following configuration. ## delay_pools 1 delay_class 1 2 delay_parameters 1 -1/-1 1200/100 delay_class 2 2 delay_parameters 2 -1/-1 600/100 delay_access 1 allow DELAY delay_access 1 deny all delay_access 2 allow DELAY-1 delay_access 1

[squid-users] delay pool configuration clarification.

Hi, I am using delay pools with following configuration. ## delay_pools 1 delay_class 1 2 delay_parameters 1 -1/-1 1200/100 delay_class 2 2 delay_parameters 2 -1/-1 600/100 delay_access 1 allow DELAY delay_access 1 deny all delay_access 2 allow DELAY-1 delay_access 1 deny

[squid-users] Squid with auth options.

Hi, I am runnung squid on Redhat Linux 9.0 working O.K. It is serving Interent access for two subnets 192.168.0.0. 192.168.1.1. having 2 Network cards. I want to authenticate users of subnet 192.168.1.1 only and users of subnet 192.168.0.0.will get internet access without authenticatoin. It is

[squid-users] Using Squid to monitor Data transfer per user basis.

Hi, I am using squid for monitoring bandwidth for my users. I am using Delay pools and all sorts of acl for monitoring users. Is there any way I can monitor data downloading in MB's per user basis with squid. For example My network serves Internet bandwidth for user Ip's

[squid-users] Where I can see squid source code.

Hi, I am using Redhat Linux 9.0. I have downloaded and installed squid latest squid-2.5.STABLE5.tar.gz I would like to go through the source code of squid. Please guide me where I can find source code of squid. Thanks for support. __

[squid-users] Is bandwidth shaper required?

Hi, I have installed squid and using it's delay pool and acl features to limit bandwidth of indivisual user. I am told that with this I can restrict only downloading speed. Squid is not useful for monitoring uploading. As per my knowledge Downloading and Uploading are releated to each other since

Re: [squid-users] Error in cache.log

. --- Henrik Nordstrom [EMAIL PROTECTED] wrote: On Sat, 20 Dec 2003, ads squid wrote: 2003/12/20 22:28:42| parseHttpRequest: Unsupported method 'recipientid=99sessionid=8119^M ^M ' 2003/12/20 22:28:42| clientReadRequest: FD 33 Invalid Request 2003/12/20 22:28:42| parseHttpRequest

[squid-users] Speed reduces as squid is activated

Hi, I have installed squid-2.4.STABLE4 on Linux 8.0, Pentium IV, 512 MB RAM and 40 GB IDE hard drive. I am having 128 Kbps Broadband Internet connection. I have created separate /cache partition of 2500 MB. User Authentication is not activated. I am using squid as transperent proxy. When squid

Re: [squid-users] Re: Hardware filewall + squid: blocking kazaa/kazaa lite

It seems it is impossible to block Kazza. Best option is to limit bandwidth of hosts using kazza by squid delay_pool feature. It worked very well for me. Also block port 1214 so that hosts could not act as kazza server. --- Robert S [EMAIL PROTECTED] wrote: Henrik Nordstrom wrote: On Fri,

[squid-users] Squid is active OR Not?

Hi, I have installed squid fresh. Installation is O.K. I get message [EMAIL PROTECTED] root]# /usr/local/squid/sbin/squid 2003/11/27 18:23:35| Squid is already running! Process ID 18315 My cache.log is as follows in file /usr/local/squid/var/logs/cache.log # 2003/11/27 17:14:38| Ready

[squid-users] Error due to access.log

Hi, Following is error in /var/log/messages file Nov 26 20:11:22 xyz squid[20230]: Squid Parent: child process 20574 started Nov 26 20:11:28 xyz (squid): Cannot open '/usr/local/squid/var/logs/access.log' for writing. ^IThe parent directory must be writeable by the ^Iuser 'adssquid', which is the

RE: [squid-users] Error due to access.log

I am not getting what do you mean by symbolic link. Thank for support --- Anthony Boynes [EMAIL PROTECTED] wrote: Was it a symbolic link? -Original Message- From: ads squid [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 26, 2003 8:01 AM To: [EMAIL PROTECTED] Subject: [squid

RE: [squid-users] Error due to access.log

location. See the man pages for ln for specifics on how it works. -- Anthony Boynes -Original Message- From: ads squid [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 26, 2003 8:29 AM To: Anthony Boynes; [EMAIL PROTECTED] Subject: RE: [squid-users] Error due to access.log

[squid-users] Error in cache.log file

Hi, I am getting warning in cache.log file. Please find attached cache_error file giving details error. I have created /cache directory as per FAQ. Size was not mentioned. I think size of the /cache directory is reducing. Is it so? Please advice. If so how to increase size of directory /cache and

[squid-users] Adding cache directory

Hi, My existing cache partition is egtting full. I have created new cache directory in different partition. I would like to use cache in old partition also. I have gone thorugh FAQ. It says With Squid-2, you will not lose your existing cache. You can add and delete cache_dir's without affecting

[squid-users] Delay pools limitations?

Is there any limitation for maximum number of delay pools can be used? Can I have 8 delay pools with delay class 1/2/3 as required for each delay pool. Max. number of delay class is 3. Thanks __ Do you Yahoo!? The New Yahoo! Shopping - with improved product

[squid-users] Squid without Cache problem

I, I am running squid-2.5.STABLE4 on Linux. I don't want to use cache. Therefore I have set following in Squid.conf #cache_mem 128 MB #cache_dir ufs /cache 5000 16 256 cache_dir null /null I am using delay pools. My Cache.log is as follows : * 2003/10/10 20:59:41| Restarting Squid

[squid-users] Some data does not get stored in cache.

Hi, Squid is running fine. Getting good amount of TCP_REFRESH_HIT and TCP_IMG_HIT and TCP_HIT I noticed some data, for example google.com is used frequently by my users bur surprisingly access.log does not show any kind of TCP_HIT. This happens with some other sites also. I have alloted 5000 MB

[squid-users] Squid performance problem.

Hi, I am running squid-2.5.STABLE4 on Linux 8.0 box. Server is Intel P4, 256 DDR, 40 GB IDE Hard drive. Everything works fine in initial stages. No error in cache.log file. No problem with access.log file. Cache works fine. Facing two problem. Don't know what is the cause. 1) As cache size

Re: [squid-users] Bloacking Kazza seems to be impossible.[Scanned]

Can you suggest me a site or article on web which will guide me how to perform content filtering by firewall. OR a working firewall code. Thanks --- fooler [EMAIL PROTECTED] wrote: - Original Message - From: ads squid [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, August 21

Re: [squid-users] Squid Error

configuration changes are required to make squid tarnsperent proxy and ncsa authentication without accelerator mode. If so I can as well use 2.5 version. Thanks --- Henrik Nordstrom [EMAIL PROTECTED] wrote: On Mon, 15 Sep 2003, ads squid wrote: As observed, Squid 3.0 is in development stage

Re: [squid-users] Squid Error

therefore looking for some alternative. Once again Soryy for trouble. Thanks --- Henrik Nordstrom [EMAIL PROTECTED] wrote: On Mon, 15 Sep 2003, ads squid wrote: Is it possible to use squid 2.5 STABLE3 as transperent proxy, with ncsa authentication No, and it never will be or has been

Re: [squid-users] Squid Error

, 15 Sep 2003, ads squid wrote: As you said it is technically not possible then how come you say with Squid 3.0 it could be done. What I said: If you are running an accelerator for your own web sites then authentication can be enabled in the source. Details can be found

[squid-users] Squid Error

I am using ncsa authentication. When I use authentication. I get following in cache.log 2003/09/14 19:30:29| aclAuthenticated: authentication not applicable on accelerated requests. 2003/09/14 19:30:31| aclAuthenticated: authentication not applicable on accelerated requests. 2003/09/14

Re: [squid-users] access.log analysis queries

I have given thought to it and would be starting this soon. I have decided to use php to analysis access.log file. By using php, you extract access.log file line by line. store Timestamp, bytes, IP address, etc in mysql database row. Each line of access.log file will be converted to each row of

[squid-users] ncsa authentication

Hi, I want to use ncsa authentication. I have installed squid-2.5.STABLE3 with [EMAIL PROTECTED] root]# /usr/local/squid/sbin/squid -v Squid Cache: Version 2.5.STABLE3 configure options: --enable-delay_pools --enable-arp-acl --enable-auth As mentioned in Squid configuration manager Icould not

[squid-users] Sending email from LAN user problem

: Fri, 5 Sep 2003 09:43:00 -0700 (PDT) From: ads squid [EMAIL PROTECTED] Subject: Re: [squid-users] delay pool problem To: Henrik Nordstrom [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] In-Reply-To: [EMAIL PROTECTED] MIME-Version: 1.0 Content-Type: multipart/alternative; boundary=0-2108689775-1062780180

Re: [squid-users] Sending email from LAN user problem

Trying with plain text mail client. --- Adam Aube [EMAIL PROTECTED] wrote: Whenever I try to email squid mailing from my LAN host machine I get follwoing error. [EMAIL PROTECTED]: ezmlm-reject: fatal: Sorry, I don't accept messages of MIME Content-Type 'multipart/alternative'

Re: [squid-users] Squid start problem

can add a new group by 'groupadd' command. You can do it in X also. Best Regards. Ehsan Lesani. - Original Message - From: ads squid To: Ehsan Lesani ; [EMAIL PROTECTED] Sent: Sunday, August 31, 2003 9:07 AM Subject: Re: [squid-users] Squid start problem How

[squid-users] Squid start problem

I have compiled and installedsquid-2.5.STABLE3 version on my Linix 8.0 machine. It went smothly. As per squid FAQ I have created cache directory. cache partition is also there. when I gave command [EMAIL PROTECTED] squid-2.5.STABLE3]# /usr/local/squid/sbin/squid -k parse It gives error. FATAL:

[squid-users] delay pool problem

Hi, I am trying to use delay pool feature for first time. Code of delay pool is as follows in squid.conf file. It is at the end of the file. *** acl tech src 192.168.0.23 delay_pools 1 #Number of delay_pool 1 delay_class 1 1 #pool 1 is a delay_class 1 delay_parameters 1 100/100 delay_access 1

[squid-users] Bloacking Kazza seems to be impossible.

As advised on this mailing list earliest. I tried everything to block Kazza as follows : My Squid.conf acl WORKING time 07:30-20:30 acl SITE dstdomain .kazza.com .KaZaA.com .imesh.com http_access deny WORKING SITE acl WORKING1 time 07:30-20:30 acl SITE1 dstdomain .desktop.kazza.com

[squid-users] want to block downloads from kazza

Hi, 10 % of my total users continuously download from kazza. It has totally hampered speed of other users. I checked mail archieve but could not get required thing. I tried with acl options. acl STOP1 src 192.168.0.42 acl WORKING time MTWHF 07:30-16:32 acl SITE dstdomain desktop.KaZaA.com

[squid-users] User Authentication using NCSA module.

Hi, I want to use NCSA type user authentication. Looking for source code since FAQ says I need to compile and install one of the supplied authentication modules. I got squid-ncsa_auth-2.5.STABLE3-2.i586.rpms from web. I installed this rpm but still get following error after squid reconfigure.

Re: [squid-users] Re: custom error messages

I have made the suggested chamges in /etc/squid/errors/ERR_ACCESS_DENIED file to supress Time, ect. saved it. But when error page is hit, it does not display modified page. Any clue. Thanks --- Henrik Nordstrom [EMAIL PROTECTED] wrote: On Wednesday 13 August 2003 23.43, Norman Zhang wrote:

RE: [squid-users] User Authentication using NCSA module.

I have added line auth_param basic program /usr/local/squid/bin/ncsa_auth /usr/local/squid/etc/passwd as mentioned in default squid file. and reconfigured squid. It gives error [EMAIL PROTECTED] root]# /usr/local/squid/sbin/squid -k reconfigure FATAL: authparam basic program

RE: [squid-users] User Authentication using NCSA module.

My password file will be at /usr/local/squid/etc/passwd but I am sorry, I am new to this don't know how to create crypt encryption. I think format is username:passowrd . Please correct me and guide about the same. Thanks for support. thanks --- Adam Aube [EMAIL PROTECTED] wrote: FATAL: authparam

[squid-users] Separate machines for cache and bandwodth management?

Hi, I have one server Linux 8.0 installed. Pentium IV. 512 RAM 36 GB SCSI. Squid 2.5 stable installed working fine as cache server . ACL's, Delay pools will be handles by same machine. also acting as router. Is it necessary to have separate machines for cache server and separate for bandwidth

RE: [squid-users] User Authentication using NCSA module.

Yes I have used rpm -ql and found out location. So my command in .conf file is auth_param basic program /usr/lib/squid/ncsa_auth /usr/local/squid/etc/passwd I have created password file. path /usr/local/squid/etc/passwd. tried to creat username and passowd by command [EMAIL PROTECTED] root]#

Re: [squid-users] Re: Sudden improvement in performance

Yes, Two-Three ACL's are working simultaneously. I stopped squid and restarted again. Cache size is reduced to 25 % of previous. May be due to this now squid is giving good performance. Is it necessary to reduce cache size once it reaches to particular limit? Is changing IDE hard disk to

[squid-users] Using Squid for distributing bandwidth proportionatly to diff networks.

Hi, I am taking 128 Kbps bandwidth from ISP and distributing it to 60 users presently of one network through Linux server running squid. I want to take additional 128 Kbps and 64 Kbps bandwidth from ISP for two additional different networks respectivly. ALL these 128 x 2 + 56 = 312 kbps will come

Re: [squid-users] Two-Three ACL combination syntax.

. Thanks --- Henrik Nordstrom [EMAIL PROTECTED] wrote: On Sunday 03 August 2003 19.17, ads squid wrote: This is my acl code. acl localnet src 192.168.0.0/255.255.255.0 acl localhost src 127.0.0.1/255.255.255.255 acl Safe_ports port 80 443 210 119 70 20 21 1025-65535 acl

Re: [squid-users] Two-Three ACL combination syntax.

am confused with acl logic. Thanks for help --- Henrik Nordstrom [EMAIL PROTECTED] wrote: On Monday 04 August 2003 08.09, ads squid wrote: I have done as directed but no success. I think I am restricting access with acl STOP1 src 192.168.0.42 acl WORKING time MTWHF 09:30-11:48 acl

Re: [squid-users] Two-Three ACL combination syntax.

127.0.0.1/255.255.255.255 http_access allow localnet http_access allow localhost http_access deny all acl magic_words1 dst 192.168.0.0/255.255.255.0 It has stop access of all users. Thanks --- Henrik Nordstrom [EMAIL PROTECTED] wrote: On Monday 04 August 2003 10.53, ads squid wrote: O.K. My

[squid-users] Sudden improvement in performance

Hi, Last 10 days I was using squid as cache server. I was getting complaints from users about very low speed in last 3-4 days. Could not use ACL's correctly therefore I stopped squid and canceled redirection of port 80 to port 3128. Surprisingly there is sudden improvement in access speed. All

[squid-users] Two-Three ACL combination syntax.

Yes, Following Code worked acl STOP src 192.168.0.23 http_access deny STOP ### I want to use following ACL jointly.I added following to squid.conf file. ### acl STOP src 192.168.0.23 acl WORKING time MTWHF 09:30-18:00 acl SITE dstdomain www.xyz.com http_access deny STOP WORKING SITE ###

RE: [squid-users] Squid.conf setting queries

It's not working Thanks --- Adam Aube [EMAIL PROTECTED] wrote: acl STOP1 src 192.168.0.23 acl WORKING time MTWHF 07:30-22:30 http_access allow STOP1 WORKING is not stopping Internet access of 192.168.0.23 after 22:30 There is an http_access line later in your squid.conf that

RE: [squid-users] Squid.conf setting queries

appreciated. Thanks --- ads squid [EMAIL PROTECTED] wrote: It's not working Thanks --- Adam Aube [EMAIL PROTECTED] wrote: acl STOP1 src 192.168.0.23 acl WORKING time MTWHF 07:30-22:30 http_access allow STOP1 WORKING is not stopping Internet access of 192.168.0.23 after 22:30

[squid-users] Squid.conf setting queries

I have configured squid.conf as follows but I can not see any performance difference. Can you guid whether squid.conf is correct. If so what may be problem? Here is my squid.conf file. ### #squid.conf #Every option in this file is very well documented in the original squid.conf

[squid-users] Putting limits with IP/MAC Address

As I know with squid I can put limits on users downloading speed by using client IP OR MAC address. I am managing Network from remote place. Some users are changing IP addresses purposly. This give IP conflict error. Then I tried to put limits by using MAC address of those particular addresses.

[squid-users] Is cbq.init must?

Hi, I am refering Bandwidth Limiting HOWTO from linux.org Documentation. It says certain things can not be done with squid.conf and therefore cbq.init should be used, which needs compilation of kernel, which i want to avoid. Is there anything which can not be done by only squid, for which

[squid-users] Is Squid is running?

I have given command /usr/local/squid/sbin/squid to start squid. It gives message Squid is already runnung WhenI use top utiliry iT does not show any squid running. Also these no change in access.log file. Is squid runnomg? Thanks __ Do you Yahoo!? Yahoo!

[squid-users] Putting upper limit on Uploading.

Hi can I put limit on uploading data speed that is for example 2Kbps using squid. So that I will get better download speed. Thanks __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com