Hi Amos,
Just to update you, I didnot only block the port 5222 and 5223, I also created
a
cache_peer_access dummy_host talk, then acl talk dstdomain .talk.google.com
.talkx.l.google.com .talkgadget.google.com
.talkgadget.google.com/talkgadget/popout www.google.com/talk/start.html and
finally
Jan 18 15:52:32 server-2008-1-D00-1 last message repeated 2 times
Jan 18 16:08:34 server-2008-1-D00-1 last message repeated 2 times
Jan 18 16:11:32 server-2008-1-D00-1 squid[21826]: httpAppendBody: Request not
yet fully sent POST http://www.server-2008-1-D00-1.com/bet/index.server.php;
Jan 18
Hi All,
Can anyone tell us, which is the best squid proxy log analyzer package
available, which can give the various reports in graphical format.
the detailed
information about which sites were accessed by which users from which
computer, at what time all other related information.
I've gone
Oops...
I meant
Vary: Accept-Encoding, Cookie
E
- Original Message -
From: Elli Albek e...@sustainlane.com
To: 'Amos Jeffries' squ...@treenet.co.nz
Cc: squid-users@squid-cache.org
Sent: Sun, 18 Jan 2009 22:00:18 -0800 (PST)
Subject: RE: [squid-users] Caching pages for users without a
Hi, all,
I'm trying squid as a reverse proxy for a web application.
I have a problem when my URL is not ending with a trailing slash.
For example :
http://ip-proxy/test/ = OK
http://ip-proxy/test = KO, Problem
if I send the request directly to the IIS server we have :
http://ip-iis/test/ = OK
On 1/18/09, Amos Jeffries squ...@treenet.co.nz wrote:
sameer shinde wrote:
On Sat, Jan 17, 2009 at 4:26 PM, Amos Jeffries squ...@treenet.co.nz
wrote:
By the sounds of it you need to open CONNECT access to that port.
Safe_ports by itself is not quite enough.
Amos
the
Thank you
Would you please share with you a configuration example for two squid servers
running behind hardware NLB switch where they use ICP and sibling relation, one
of the two server is the origin for both
Regards
Atef A. M. AlQashqish
Operation Manager / MCSE, MCT, ITIL Certified Service
François-Xavier VIOLET wrote:
Hi, all,
I'm trying squid as a reverse proxy for a web application.
I have a problem when my URL is not ending with a trailing slash.
For example :
http://ip-proxy/test/ = OK
http://ip-proxy/test = KO, Problem
if I send the request directly to the IIS server we
On 1/19/09, sameer shinde s9sam...@gmail.com wrote:
On 1/18/09, Amos Jeffries squ...@treenet.co.nz wrote:
sameer shinde wrote:
On Sat, Jan 17, 2009 at 4:26 PM, Amos Jeffries squ...@treenet.co.nz
wrote:
By the sounds of it you need to open CONNECT access to that port.
Atef Alqashqish wrote:
Thank you
Would you please share with you a configuration example for two squid servers
running behind hardware NLB switch where they use ICP and sibling relation, one
of the two server is the origin for both
The sibling part of the config you had sort of right.
It
Hi all
i need insert an string between /Internet/ and /acces/ in urls and let the
rest of the beginin and the end intact
for example: http://www.site.com/Internet/acces/2009-01-15/network/any_think
to
http://www.site.com/Internet/www.site.com/acces/2009-01-15/network/any_think
whit squirm,
You may write your redirector
On Monday 19 January 2009 13:48:02 Enrique wrote:
Hi all
i need insert an string between /Internet/ and /acces/ in urls and let the
rest of the beginin and the end intact
for example:
http://www.site.com/Internet/acces/2009-01-15/network/any_think to
You can.. You must look at Rewrite URL for your question.
Regards,
Mehmet CELIK
On Monday 19 January 2009 13:48:02 Enrique wrote:
Hi all
i need insert an string between /Internet/ and /acces/ in urls and let the
rest of the beginin and the end intact
for example:
Hi,
After I have installed squid3-stable11 from source on fedora 9 with all
updates done to fedora some clients complained that they browsing
interruptions and slowness going through the logs I noticed that squid every
now and then crashes with the following error and restarts by itself
Hi,
After I have installed squid3-stable11 from source on fedora 9 with all
updates done to fedora some clients complained that they browsing
interruptions and slowness going through the logs I noticed that squid
every
now and then crashes with the following error and restarts by itself
All,
I am looking for a squid based solution for a problem I have. I
have a squid reverse proxy sitting in front of three web servers, set up
so I can test and QA each server by itself without a problem, and yet
still server to the www site as if they were one. While this works fine
Hi!
Recentyli i have installed jesred and configure it and put only one rule:
to test
regexi ^.*/Internet/acces/*.[^/]*/(.*$) http://mylocaldomain
and work. But problem is i don't want redirect to especific URL ; realy
need insert an string in url maintaining the rest of the URL, i realy
Amos I got the same errors wit Stable11 this is why I switched back to the
original fedora squid package.
Here are the logs I got for Stable11
2009/01/19 09:36:52| helperStatefulOpenServers: Starting 5 'ntlm_auth'
processes
[2009/01/19 09:36:52, 0] utils/ntlm_auth.c:get_winbind_domain(173)
All,
I am looking for a squid based solution for a problem I have. I
have a squid reverse proxy sitting in front of three web servers, set up
so I can test and QA each server by itself without a problem, and yet
still server to the www site as if they were one. While this works fine
Amos Jeffries wrote:
All,
I am looking for a squid based solution for a problem I have. I
have a squid reverse proxy sitting in front of three web servers, set up
so I can test and QA each server by itself without a problem, and yet
still server to the www site as if they were one. While
Amos Jeffries wrote:
All,
I am looking for a squid based solution for a problem I have. I
have a squid reverse proxy sitting in front of three web servers, set
up
so I can test and QA each server by itself without a problem, and yet
still server to the www site as if they were one.
Greetings,
Access to www.dairyaustralia.com.au hangs indefinitely when accessed by IE
and Firefox behind a squid proxy server (V2.7.STABLE4).
Access to the site works fine when the proxy is bypassed for this site.
I did a Wireshark trace and checked the http headers but they don't reveal
2009/01/16 11:00:35| CACHEMGR: unknown@127.0.0.1 requesting 'info'
2009/01/16 11:00:35| The reply for GET
cache_object://localhost.mydomain.com/info is DENIED, because it matched
'all'
What do your reply_access lines look like? The reply to this allowed
request is denied.
Thank you
Why so many 304 resposne for MSIE ?
I am serving a static JS file, with Squid as reverse proxy to my
Apache 1.x, which has the following response to the client:
=
Status=OK - 200
Last-Modified=Thu, 11 Oct 2007 05:04:34 GMT
Accept-Ranges=bytes
Content-Length=27157
Looking at my Firefox session it appears Firefox hangs on performing
this: Read ajax.googleapis.com
Perhaps understanding what it is trying to access will lead to an
answer as to why Squid is causing issues with the site.
On Tue, Jan 20, 2009 at 1:26 PM, tony.car...@dpi.nsw.gov.au wrote:
Hi
Installed squid 2.7 on our Windows Xp machine, connected to our DMZ zone
firewall, configured the firewall to point to proxy webserver (squid) Ip
address and port 3128.
Our internet line is filtered by our ISP which they use a proxy also.
Our XP clients machines in our internal Windows 2003
howard chen wrote:
Why so many 304 resposne for MSIE ?
I am serving a static JS file, with Squid as reverse proxy to my
Apache 1.x, which has the following response to the client:
=
Status=OK - 200
Last-Modified=Thu, 11 Oct 2007 05:04:34 GMT
Accept-Ranges=bytes
Enrique wrote:
Hi!
Recentyli i have installed jesred and configure it and put only one rule:
to test
regexi ^.*/Internet/acces/*.[^/]*/(.*$) http://mylocaldomain
and work. But problem is i don't want redirect to especific URL ; realy
need insert an string in url maintaining the rest of the
Hi,
I am using squid 2.6.STABLE 21 on linux.
my squid.conf has the following settings:
maximum_object_size_in_memory 10 KB
cache_mem 3072 MB
maximum_object_size 2000 MB
minimum_object_size 0
After running squid for more than 1 months, I ran 'squidclient
How to enable socks v4 and Z39.50 ports support on port 210 in squid
3.0 proxy server?
30 matches
Mail list logo