Re: [squid-users] Trying to combine two 50K GPRS connections with Squid on a Windows LAN for an Internet Cafe in Ghana

DEMETRIO MARTINEZ wrote: Hello I'm an Italian engineer working in the North of Ghana setting up small internet points. I would like to combine two 50Kbps GPRS connections on a Internet point LAN using a Squid hierarchy. I have set up the two connections separately on two WinXP SP3 PC (Let's

[squid-users] squid + wccp

I am trying with no luck to setup squid Version 3.0.STABLE10 (Fedora core 9) with wccp2. The configuration seems to be ok at least this is what the debug logs are showing however squid does not receive any traffic. I tested squid by pointing the browser to its IP and it works fine. GRE tunnel and

Re: [squid-users] squid + wccp

Ramzi Abdallah wrote: I am trying with no luck to setup squid Version 3.0.STABLE10 (Fedora core 9) with wccp2. The configuration seems to be ok at least this is what the debug logs are showing however squid does not receive any traffic. I tested squid by pointing the browser to its IP and it

Re: [squid-users] squid + wccp

Try this: iptables -t nat -A PREROUTING -i wccp0 -p tcp -m tcp --dport 80 -j DNAT --to-destination On Sun, Feb 8, 2009 at 1:39 PM, Amos Jeffries squ...@treenet.co.nz wrote: Ramzi Abdallah wrote: I am trying with no luck to setup squid Version 3.0.STABLE10 (Fedora core 9) with wccp2. The

RE: [squid-users] squid + wccp

Thank you for your reply. iptables -t nat -L now shows the entry Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywheretcp dpt:http redir ports 3128 Cache.log is showing wccp2 configured properly

RE: [squid-users] squid + wccp

Thanks david still no luck From: David Rodríguez Fernández [mailto:davi...@gmail.com] Sent: Sunday, February 08, 2009 3:17 PM To: Amos Jeffries Cc: rabdal...@pobox.com; squid-users@squid-cache.org Subject: Re: [squid-users] squid + wccp Try this: iptables -t nat -A PREROUTING -i wccp0 -p tcp -m

RE: [squid-users] forward and reverse through one system

Amos, See responses to your questions below. Thanks. I have one instance of squid is configured for forward web proxy and accelerator for OWA (per the wiki). In order for users to avoid changing their proxy settings, I need the forward proxy to be able to access OWA going out and back in

[squid-users] Build patch fails to apply on Squid 2.7 stable6

Hi, I have been trying to compile squid 2.7-stable6 on Fedora Core 9 x86-64 system. I have already done all the changes I need in the spec file in order to create my system rpms but I noticed that when the rpmbuild try to build the rpm it fails when it tries to apply the squid2.6Stable2 build

RE: [squid-users] squid + wccp

Thanks david still no luck From: David Rodríguez Fernández [mailto:davi...@gmail.com] Sent: Sunday, February 08, 2009 3:17 PM To: Amos Jeffries Cc: rabdal...@pobox.com; squid-users@squid-cache.org Subject: Re: [squid-users] squid + wccp Try this: iptables -t nat -A PREROUTING -i wccp0 -p

Re: [squid-users] Build patch fails to apply on Squid 2.7 stable6

Hi, I have been trying to compile squid 2.7-stable6 on Fedora Core 9 x86-64 system. I have already done all the changes I need in the spec file in order to create my system rpms but I noticed that when the rpmbuild try to build the rpm it fails when it tries to apply the squid2.6Stable2

RE: [squid-users] forward and reverse through one system

Amos, See responses to your questions below. Thanks. I have one instance of squid is configured for forward web proxy and accelerator for OWA (per the wiki). In order for users to avoid changing their proxy settings, I need the forward proxy to be able to access OWA going out and

[squid-users] TProxy4 and Squid 3.1.0.5 client address spoofing problem !

Hi, Here is my situation : * CentOS 5.2 ( my own built kernel 2.6.25.11-TProxy-ReiserFS with this patch : http://www.balabit.com/ downloads/files/tproxy/tproxy- kernel-2.6.25-20080519-165031- 1211208631.tar.bz2) * iptables v1.4.3-rc1( ftp://ftp.netfilter.org/pub/

Re: [squid-users] TProxy4 and Squid 3.1.0.5 client address spoofing problem !

Hi, Here is my situation : * CentOS 5.2 ( my own built kernel 2.6.25.11-TProxy-ReiserFS with this patch : http://www.balabit.com/ downloads/files/tproxy/tproxy- kernel-2.6.25-20080519-165031- 1211208631.tar.bz2) * iptables v1.4.3-rc1( ftp://ftp.netfilter.org/pub/

[squid-users] Squid-2.7-STABLE6 dns.median_svc_time is always 0

Hello, I am currently in the process of moving from 2.6 to 2.7 and I am seeing an issue on 2 of the servers that I just installed 2.7-STABLE6 on. The dns.median_svc_time = 0.00 seconds is always 0 now matter and squid is processing request just fine. I an running Linux 2.6.9 kernel and

[squid-users] Squid SSL problem with OWA

Hi, I have squid V3 PRE5 running RHL for 2 years without any problem for https access to OWA. As the ssl certificate was expiring we received a new ssl certificate and since then I have problem. I have installed a new box with Squid3.0.STABLE12. When I start squid with -DYNCD3 option I can do

[squid-users] Squid 3.0 STABLE7 -- deny all ??

Dear All, Recently I have installed FC9 and squid 3.0 STABLE 2.0 (Which has installed along with that). I was trying using NCSA authentication. After a day long try I was unable to setup NCSA auth. At the end through googeling I found that STABLE 2 has the bug in auth. I updated squid to 3.0

Re: [squid-users] Squid 3.0 STABLE7 -- deny all ??

Arun Shrimali wrote: Dear All, Recently I have installed FC9 and squid 3.0 STABLE 2.0 (Which has installed along with that). I was trying using NCSA authentication. After a day long try I was unable to setup NCSA auth. At the end through googeling I found that STABLE 2 has the bug in auth. I

Re: [squid-users] Squid SSL problem with OWA

Rakesh Jha wrote: Hi, I have squid V3 PRE5 running RHL for 2 years without any problem for https access to OWA. As the ssl certificate was expiring we received a new ssl certificate and since then I have problem. I have installed a new box with Squid3.0.STABLE12. When I start squid with