Hey,
On Sat, May 30, 2009 at 11:34 AM, Amos Jeffries squ...@treenet.co.nz wrote:
Further, the access.log of Squid is likely recording the HTTP version of the
visitor.
But Squid do support HTTP 1.1 keep-alive?
E.g.
Status=OK - 200
Last-Modified=Wed, 08 Mar 2006 10:45:14 GMT
Roy M. wrote:
Hey,
On Sat, May 30, 2009 at 11:34 AM, Amos Jeffries squ...@treenet.co.nz wrote:
Further, the access.log of Squid is likely recording the HTTP version of the
visitor.
But Squid do support HTTP 1.1 keep-alive?
Yes. Squid does support most of HTTP/1.1
(2.6 and 3.0 supports
Hello,
My system is still not working !
currently i am trying to see if my box is configured correcty, tproxy,
squid 3.1, and the iptables any way i can test to see if all is well ?
so once this one is set i can move and experiment on wccp !
i tried to put the box as gateway for some pc, but
Hi Chris,
Thank you for the reply. I will use squid -k debug to check what is going
on.
As for the additional info sorry for not clearing the squid setup more
anyway this is squid configuration values you have guessed as taken from my
squid.conf
Wild guesses based on the information given:
*)
Ragheb Rustom wrote:
Hi Chris,
Thank you for the reply. I will use squid -k debug to check what is going
on.
As for the additional info sorry for not clearing the squid setup more
anyway this is squid configuration values you have guessed as taken from my
squid.conf
Wild guesses based on the
hi,
i am using the following configuration to access websites on multiple
web servers:
http_port 80 accel vhost
cache_peer 127.0.0.1 parent 80 0 no-query originserver name=server1
cache_peer_domain server1 sub1.mydomain.com
cache_peer 10.1.1.1 parent 80 0 no-query originserver name=server2
Ahmed Akkad wrote:
hi,
i am using the following configuration to access websites on multiple
web servers:
http_port 80 accel vhost
cache_peer 127.0.0.1 parent 80 0 no-query originserver name=server1
cache_peer_domain server1 sub1.mydomain.com
cache_peer 10.1.1.1 parent 80 0 no-query
for using TPROXY, you should set up triangle routing that sometimes
make headache. if you don't want triangle routing, you could make your
proxy act as bridge.
It's true that we have invisible proxy, for better you could strip off
the squid signature at the below error page by modifyng the source.
Hi Amos,
Thanks for the info.
According to what you have mentioned below what do you think should be the
value of cache_swap_low and high values to lower the load on the system
although the hardware is big enough I think to hold such a load (all system
us SAS based with 15k rpm drives and has
Amos Jeffries wrote:
Yan Seiner wrote:
Amos Jeffries wrote:
Yan Seiner wrote:
I have a question about setting up squid in my environment.
My network is fairly generic:
a firewall running openwrt, 4 mb flash and 8 mb ram, providing NAT
a server providing DNS and DHCP services; this machine
On Fri, 2009-05-29 at 20:50 -0500, Hunter Fuller wrote:
I can verify this to be true, as I've 'bungled' my squid.conf many a
time and squid kept running until I fixed it.
-hackmiester
Too short? http://five.sentenc.es/
2009/5/29 Ben Scott mailvor...@gmail.com:
On Fri, May 29, 2009 at
Hallo!
I try to configure squid accelerator since months.
I miss a page bestpractice or troubleshoot.
Now i have write my minds to a page. Please read this.
I am grateful for informations.
http://www-home.fh-lausitz.de/~hlehmann/tmp/090527.squid.accel.bestprakt.html
regards Heiko
On 27.05.09 18:55, RoLaNd RoLaNd wrote:
Subject: [squid-users] direct access for local intranet urls
i'm not sure how to do this, though i want to make sure that my local
intranet sites aren't cached with squid.
if you need to bypass the squid server and access your local internet
sites
On Thu, May 28, 2009 at 22:40, Amos Jeffries squ...@treenet.co.nz wrote:
Amos Jeffries wrote:
A typo in my patch :( sorry. Lower case 'T'.
Amos
FWIW, I'm just build testing for the commit now. It will be in the next set
of snapshots.
Cool. installation of the patched version went fine (no
Ragheb Rustom wrote:
Hi Amos,
Thanks for the info.
According to what you have mentioned below what do you think should be the
value of cache_swap_low and high values to lower the load on the system
although the hardware is big enough I think to hold such a load (all system
us SAS based with
Heiko L. wrote:
Hallo!
I try to configure squid accelerator since months.
I miss a page bestpractice or troubleshoot.
Now i have write my minds to a page. Please read this.
I am grateful for informations.
http://www-home.fh-lausitz.de/~hlehmann/tmp/090527.squid.accel.bestprakt.html
regards
Kurt Buff wrote:
On Thu, May 28, 2009 at 22:40, Amos Jeffries squ...@treenet.co.nz wrote:
Amos Jeffries wrote:
A typo in my patch :( sorry. Lower case 'T'.
Amos
FWIW, I'm just build testing for the commit now. It will be in the next set
of snapshots.
Cool. installation of the patched
On Sat, May 30, 2009 at 17:37, Amos Jeffries squ...@treenet.co.nz wrote:
Kurt Buff wrote:
On Thu, May 28, 2009 at 22:40, Amos Jeffries squ...@treenet.co.nz wrote:
Amos Jeffries wrote:
A typo in my patch :( sorry. Lower case 'T'.
Amos
FWIW, I'm just build testing for the commit now. It
akinf wrote:
I had asked you , how i can get client ip using icap? I found the answer.
Thank you anyway.
But i want to a few questions more
1.i configured squid to direct http messages to an icap server.
But when my icap server is down, squid is not able to reconnect my icap
server.
Is
Kurt Buff wrote:
On Sat, May 30, 2009 at 17:37, Amos Jeffries squ...@treenet.co.nz wrote:
Kurt Buff wrote:
On Thu, May 28, 2009 at 22:40, Amos Jeffries squ...@treenet.co.nz wrote:
Amos Jeffries wrote:
A typo in my patch :( sorry. Lower case 'T'.
Amos
FWIW, I'm just build testing for the
20 matches
Mail list logo
