In our setup ISA is being used as parent peer. The problem is that clients
cannot browse https Sites.(All http/ftp sites works fine)
OS =Ubuntu 8.04
Squid3 is installed
My Squid.conf File:
visible_hostname 10.1.82.53
cache_peer ISASERVER parent 8080 0 default no-digest no-query
http_port
Peer)
mån 2010-03-08 klockan 11:47 + skrev GIGO .:
In our setup ISA is being used as parent peer. The problem is that clients
cannot browse https Sites.(All http/ftp sites works fine)
You need
never_direct allow all
Without that Squid will attempt to go direct when using a parent do
Hi all,
My problem is that my acl for Pusr(power users) for denying access to facebook
youtube in office hours is not working may be there is a conflict in the
definition of time. Also please guide me that if i have done it alright or
there are mistakes in the file and optimization overall
Dear All,
I am facing this problem that images are not loading properly into web pages.
The clients that are directly on ISA are having better expereince of net
browsig then Squid with cache. (Its response is slow).
Something to do with my cache settings??
Further information : I have
: [squid-users] Images are not loading properly into web pages.
(not sure about my cache settings)
GIGO . wrote:
Dear All,
I am facing this problem that images are not loading properly into web
pages. The clients that are directly on ISA are having better expereince of
net browsig then Squid
: [squid-users] Images are not loading properly into web pages.
(not sure about my cache settings)
On Wed, 10 Mar 2010 14:50:50 +, GIGO . wrote:
Dear Amos,
Thank you very much for your detail analysis.I have tried to understood
and implemented whatever u have told .However i have few more
I have tried every trick but cannot made it to work please help out.Time based
acls are not working.
acl Whours time MTWHF 09:00-13:00
acl Whours time MTWHF 14:30-18:10
http_access deny PUsr youtube_domains Whours
http_access deny PUsr Whours facebook_sites
Instead of the access denied in
I want a way that any requests for my local web servers located in
(10.0.0.0/8) does not go to internet so proxy should bypass them otherwise to
use my local web servers i have to do the settings in all the web browsers that
dont use squid proxy for local web addresses.
regards,
Bilal
] Time Based ACL's
you need to define ACL for PUsr
as below and place it above all other ACLs as
acl PUsr source
On 3/11/2010 7:27 PM, GIGO . wrote:
I have tried every trick but cannot made it to work please help out.Time
based acls are not working.
acl Whours time
Dear All,
Relevant info:
On IBM Server 3650 x series with physical RAID 1 .
Disk space comprises of 70 Gb
Intended is caching of windows update.
intended is caching of youtube contents.
Single is dedicated to running squid on Ubuntu 8.04
Current Settings : cache_dir aufs
Please your guidance required on the following
1. I have studies these two guides for youtube content caching but i am not
sure that whether this addresses squid3 as well or not.
http://wiki.squid-cache.org/ConfigExamples/DynamicContent/YouTube/Discussion?action
Thank you.
Date: Tue, 16 Mar 2010 21:38:10 +
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Squid Youtube caching Autostartup.
On Tue, 16 Mar 2010 13:10:11 +, GIGO . gi...@msn.com wrote:
Please your guidance required on the following
Dear All,
Please guide me on this
Is there any difference between maximum_object_size and max-size directives.
What is the recommended setting when you are looking forward for caching
windows update and youtube content. Almost 1000 clients.
regards,
It is related to starting squid automatically at boot. i have tried enough but
did not succeded in doing that. I have compiled squid3 stable24 on Ubuntu
8.04LTS. What i figured out is that squid is not being allowed to run as root
so my startup scripts failed evend
doing su -u proxy
Please somebody guide on the requested matter.
From: gi...@msn.com
To: squ...@treenet.co.nz; hen...@henriknordstrom.net;
squid-users@squid-cache.org
Date: Mon, 15 Mar 2010 13:03:24 +
Subject: [squid-users] Cache_dir size considerations
Dear
The total amount of Ram on the server is 4 GB with cache_mem parameter set to 1
GB.
Date: Wed, 17 Mar 2010 08:18:03 +0100
From: mrom...@ottotecnica.com
CC: squid-users@squid-cache.org
Subject: Re: [squid-users] Cache_dir size considerations
GIGO
Still looking forward for some assistance on requested matter. Please guide
regards,
From: gi...@msn.com
To: squid-users@squid-cache.org
Date: Wed, 17 Mar 2010 04:59:29 +
Subject: [squid-users] Startup/Shutdown scripts.
It is related to
..
regards,
Date: Wed, 17 Mar 2010 11:00:22 +0100
From: mrom...@ottotecnica.com
CC: squid-users@squid-cache.org
Subject: Re: [squid-users] Cache_dir size considerations
GIGO . ha scritto:
The total amount of Ram on the server is 4 GB
great it feel right to me thanks!
Date: Wed, 17 Mar 2010 02:46:04 -0700
From: jd...@yahoo.com
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Max Object Size.
From: GIGO .
Is there any
difference between maximum_object_size and max
Dear henrik,
If you have only one physical machine what is the best strategy for miminmizing
the downtime and rebuild the cache directory again or start utilizing the squid
without the cache directory? I assume we have to reinstall the Squid Software?
Please guide
I installed ubuntu server as u-admin account. I have set the directive:
cache_effective_user to squidadmin. However my squid process keep on running
as b-admin account. And my cache_effective user never comes into play.
As per a guide which described that squid will only shift to the defined
How to setup squid proxy to run in fail-over mode? Any guide.
regards,
Bilal Aslam
_
Hotmail: Powerful Free email with security by Microsoft.
https://signup.live.com/signup.aspx?id=60969
@squid-cache.org
Date: Thu, 18 Mar 2010 09:54:34 +0100
Subject: RE: [squid-users] Squid cache_dir failed - can squid survive?
tor 2010-03-18 klockan 06:16 + skrev GIGO .:
Dear henrik,
If you have only one physical machine what is the best strategy for
miminmizing the downtime and rebuild
On a compiled squid3 stable24. I am unable to run squid as root in Ubuntu. So
the cache_effective_user defined in squid.conf never comes into play. Is this a
security concern? what good is cache_effective_user for?
Is it right to run squid with the default ubuntu user one has installed
considerations
GIGO . ha scritto:
Well i want to make sure that my settings are optimized and want to
learn more about the cache_dir settings.let me come in details
Gigo,
you are asking a lot of questions all at once.
This is a volounteer-based support list, so your chances of getting
Please guide me on this whats wrong. I am unable to compile
Squid3stable24 on Ubuntu 8.04 LTS server.
I want to use active directory authentication(my clients should be able to
authenticate themselves with active directory accounts) Following is my command:
./configure
I have successfully setup running of multiple instances of squid for the sake
of surviving a Cache directory failure. However I still have few confusions
regarding peering multiple instances of squid. Please guide me in this respect.
In my setup i percept that my second instance is doing
: Re: [squid-users] Peering squid multiple instances.
GIGO . wrote:
I have successfully setup running of multiple instances of squid for the
sake of surviving a Cache directory failure. However I still have few
confusions regarding peering multiple instances of squid. Please guide me
I want to do the security hardening of my Squid Server with Iptables. I intend
to have no rule on outbond traffic however ibound traffic would be restricted.
please guide what are the minimum ports that are required to be open on
iptables.
Following is what i thought:
Allow all incoming
purpose:
To authenticate squid users through active directory before allowing them
access to internet.
Compile Options:
./configure --prefix=/usr --localstatedir=/var --libexecdir=${prefix}/lib/squid
--srcdir=. --datadir=${prefix}/shares/squid --sysconfdir=/etc/squid3
DearAll,
Please help me on this as after setting up multiple instances on the same
server for (cache Directory fault tolerance myy squid speed/response is
extremely slow and even most of the sites keep on opening and opening. I am
failing to figure out whats wrong. Please guide me on this i
Please I want to add information for my previous query. My previous setup with
single instance was running fine.Another change is that i compiled my new setup
with more options this time like enabling delay pools , cache digest and active
directory authentication support. Is the below issue in
From the multiple instance setup using Squid 3stable25 i have shifted to
squid3stable1 packaged with ubuntu 8.04 LTS.However i am unable to understand
why its too much slow. Whats wrong please anybody help out.Is it something to
do with Operating system? Or initially Squid runs that much slow?
What is the meaning of Rebuilding storage in /var/spool/squid3 (DIRTY).
regards,
_
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
Subject: Re: [squid-users] SquidCompilationproblem -squid_ldap_auth.c:123:18:
error: lber.h: No such file or directory
On Sun, 21 Mar 2010 19:37:56 +, GIGO . wrote:
Please guide me on this whats wrong. I am unable to compile
Squid3stable24 on Ubuntu 8.04 LTS server.
I want to use
I want that if my first listed cache peer goes down then only should my second
peer be used.
-
cache_peer 127.0.0.1 3128 0 default no-digest no-query no-delay (only if this
is unavailable then the second one listed is used)
cache_peer 10.1.82.205 8080 0 default proxy-only
I am using ISA server as cache_peer parent and runing multiple instances on my
squid Sever. However i am failing to understand that why the behaviour of Squid
is extremely slow. At home where i have direct access to internet the same
setup works fine.Please somebody help me out
regards,
Very Slow responsetime. Experts
please help.
GIGO . wrote:
I am using ISA server as cache_peer parent and runing multiple instances on
my squid Sever. However i am failing to understand that why the behaviour of
Squid is extremely slow. At home where i have direct access to internet
Date: Tue, 30 Mar 2010 17:05:50 +1300
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] HTTP_Miss/200,304 Very Slow responsetime. Experts
please help.
GIGO . wrote:
I am using ISA server as cache_peer parent and runing multiple instances on
my squid
Is there a trick to trace cache_hits and Cache_misses in SARG and in more
readable format.Also in detail and summarized form that how much data has been
came through the cache.or i have to use someother tool and which?
what is the best reporting tools to use for squid.Can someone give a
Is it possible to upgrade from Squid3.0 to Squid3.1.1 by applying patch/diff.
Is there any howto available which can be refered to? Should every body
upgrade?
_
Hotmail: Trusted email with
Dear All/Amos,
I want to allow certain(not all) Active Directory users to use squid by way of
SSO with Active Directory. So means when any one from those specific users will
login into Active Directory they should have automatically access to internet
via Squid Proxy. Other AD users which
with Active Directory-Squid Clients
Have a look at
http://wiki.squid-cache.org/ConfigExamples/Authenticate/Kerberos and
http://sourceforge.net/projects/squidkerbauth/files/squidkerbldap/squid_kerb_ldap-1.2.1/squid_kerb_ldap-1.2.1.tar.gz/download
Regards
Markus
GIGO . wrote in message
news:snt134
Dear All,
Please guide me in regard to SSO setup with Active Directory(No winbind/Samba).
I have the following questions in this regard.
1. Creating a Kerberos service principal and keytab file that is used by the
Squid what is the effective method? Difference between using Ktpass vs
think it will depend on your environment.
Regards
Markus
GIGO . wrote in message
news:snt134-w101cbed44254f957cda154b9...@phx.gbl...
Dear Markus,
Please i have few confusions which i want to satisfy.
1. If kerberos Authentication fails then what would be the fallback behavior
would
Hi All,
In our environment currently we are using ISA server with userbased
authentication. we are using windows 2003 Active Directory and almost all of
the users are using Windows based OS. We want to seemlessly migrate our users
to Squid.
I have not yet reached to any conlusion despite lot
If i select negotiate/Kerberos as authentication protocol for my Squid on Linux
and configure no FallBack Authentication.what would be the consequence ?
1. Isnt it that all of my users who have logged into Active Directory and where
browser is supported will be able to use squid?
2.
this? Happy to
discuss any of this off list or on.
Cheers,
Nick
On 08/04/2010 04:06, GIGO . wrote:
If i select negotiate/Kerberos as authentication protocol for my Squid on
Linux and configure no FallBack Authentication.what would be the consequence ?
1. Isnt it that all of my users who
regenerated. Have you experienced this? Happy to
discuss any of this off list or on.
Cheers,
Nick
On 08/04/2010 04:06, GIGO . wrote:
If i select negotiate/Kerberos as authentication protocol for my Squid on
Linux and configure no FallBack Authentication.what would be the consequence
?
1
down-side to Kerberos is that it's an
all-or-nothing service, either you use Kerberos and only Kerberos or
you risk security breaches in any mixed situation.
HTH
Khaled
2010/4/6 GIGO . :
Dear All,
Please guide me in regard to SSO setup with Active Directory(No
winbind/Samba). I have
I have created a user proxy in Centos from which i am running my squid
successfully with all the rights properly configured until i change my
configuration file for Negotiate/Kerboros.
I am receiving the following error when trying to start squid:
2010/04/09 05:06:12| helperOpenServers:
Authorizing users via LDAP group:
It is listed in the squid_ldap_group man page that using -D binddn -W secret
fle is to be preferred on -D binddn -w password. While it provides extra
security then printing the password in plaintext inside squid.conf. Doesnt this
query itself go in clear
When you upgrade is it possible to use the existing cache directories created
through previous version(squid 3) or you have to rebuild your cache.
regards,
Bilal Aslam
_
Hotmail: Trusted
: hen...@henriknordstrom.net
To: gi...@msn.com
CC: squid-users@squid-cache.org
Date: Sat, 10 Apr 2010 19:44:31 +0200
Subject: Re: [squid-users] ipcCreate error:
lör 2010-04-10 klockan 09:23 + skrev GIGO .:
I have created a user proxy in Centos from which i am running my squid
successfully
account
of the UnixAdministrators to it. Finally I change the permissions on the
OU=UnixPrincipals so that the members of the group UnixAdministrators have
full rights (or limited rights ) for objects under this OU.
Regards
Markus
GIGO . wrote in message
news:snt134
/ spn upn and
not just the domain. Also check your DNS and host local host entries.
E.g.: msktutil -c -b CN=COMPUTERS -s HTTP/squid1.[mydomain] -k
/etc/squid/HTTP.keytab --computer-name auth1 --upn HTTP/squid1 --server dc1
-verbose
Nick
On 15/04/2010 07:22, GIGO . wrote:
Dear Markus
Dear All,
Once again i failed to properly create keytab. Following is the detail of how i
performed this task
step No 1: i changed my krb5.conf file as follows;
[logging]
default = FILE:/var/log/krb5libs.log
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/kadmind.log
2010-04-14 klockan 04:47 + skrev GIGO .:
Hi Henrik,
Thank you this problem is resolved by placing the squid_kerb_auth in
the libexec folder. Now i beleive that i also have to place any other
helpers like squid_ldap_group in the same location to get it to work.
Yes. if you have selinux
I get the following error whenever i try to use squid: (currently i am trying
to use it from the AD which is also the KDC for squid to provide
authentication.)
Access Denied:
Access control configuration prevents your request from being allowed at this
time. Please contact your service
.
Nick
On 16/04/2010 08:43, GIGO . wrote:
Dear Nick/Markus,
I am totally lost in translation and am not sure what to do i need your help
please. The problem is that my kerberos authentication is not working. In my
virtual environment i have two machines one configured as Domain
the browser is returning a NTLM token not a Kerberos token whu
squid_kerb_auth will deny access.
Regards
Markus
GIGO . gi...@msn.com wrote in message
news:snt134-w155de8e05828b08d15c09ab9...@phx.gbl...
Dear Nick,
This was the result of my klist -k command:
[r...@squidlhrtest log
Dear Markus/Nick/All,
After a great struggle and help (i got from you people)i was managed to resolve
the issue however i have few confusions which i wish you to ask please.
1. First of all I traced down my problem to SPN Names casesensitivity the case
for ServicePrincipalName attribute
Dear Markus/All,
Please guide me on the matter discussed below:
Single Forest Multiple Domain setup
A
/ \
/ \
BC
Problem:
Single FOrest Multiple domains where as Root A is empty
Dear All,
The problem under discussion is a continutity of SPN creation/Single Forest
MultiDomain (Active Directory) topic.
@ Markus
Yes my infrastructure is Active Directory based (Root Forest Directory A with
two child domains B (80 % users) C (20 % users) in their own trees). Only
Hi,
What is the behaviour/mechanism of authentication if using squid proxy for both
as forward proxy and reverse proxy.
I have successfully setup it for a forward proxy using the Helper files by
Markus and the following tutorial;
Dear All,
Is it safe enough to use Automatic yum updates on the squid Server
machine? Is there any strict package version requirements to have those
with which squid was already installed.
Automatic updates will even upgrade kernel as well so is it ok?
Please your guidance
Dear All,
I want to confirm that my youtube/facebook and windowsupdate are being cached
as i configured. How to have this assurity. Further i wish to view what are the
contents of my cache. Please guide in this respect.
Thanking you
regards,
Bilal
Hi,
I start squid in the normal mode as following:
/usr/sbin/squid -D -f /etc/squid/squid.conf
Could there be any benefit achieved running it in a deamon mode. Can please
somebody guide in detail
Thanking in advance
regards,
Bilal
Dear All,
I require your help and guidance regarding dynamic content caching. Following
are the quries.
1. I am running squid in multiple instances mode (For Cache Disk Failure
Protection). I dont think that it has any effect on internet object caching? I
am confused that if connect
All,
I am really sorry i was looking at the access.log file of squid instance that
is user facing and not the instance that is doing the fetching/caching and
there i can see mp4 files being cached. However i am not very much confident
about my settings so please read my queries and the
Hi all,
Can anybody please explain me what does this error mean and why it occurs it
happens while i was testing youtube/facebook caching.
TCP_NEGATIVE_HIT/204
Does this suggest that some object in cache has corrupted? if so how to rectify
the error?
Is this error only means that
Dear all,
never_direct/always_direct
Why two directives had to be created while one directive could have done the
trick? Please guide
regards,
Bilal
_
Hotmail: Free, trusted and rich
Caching/Windowsupdate/Facebook/youtube
GIGO . wrote:
All,
I am really sorry i was looking at the access.log file of squid instance
that is user facing and not the instance that is doing the fetching/caching
and there i can see mp4 files being cached. However i am not very much
confident
Hi all,
When i change SELINUX from permissive mode to Enforcing mode. My multiple
instance setup fail to start. Please guide how to overcome this.
---Excerpts from cache.log-
2010/05/18 10:31:51| TCP connection to 127.0.0.1/3128 failed
2010/05/18
Dear All,
Your guidance is required. Please help.
It looks that squid process run by default as a confined process whether its a
compiled version or a version that come with the linux distro. It means that
the squid software is SELINUX aware.Am i right?
[r...@squidlhr ~]# ps -eZ | grep
Hi all,
I am running multiple instances of squid on the same machine. One instance is
taking the clients request and forwarding to its parent peer at 127.0.0.1. All
is going well. However there is a confusion related to reporting through sarg.
To capture the client activity sarge is parsing
| audit2allow
You can also try to restore selinux context for all squid files:
restorecon -R /etc/squid
restorecon -R /var/log/squid
etc...
or touch /.autorelabel and reboot
Tiery
On Tue, May 18, 2010 at 9:47 AM, GIGO . wrote:
Dear All,
Your guidance is required. Please help.
It looks
context (with restorecon or .autorelabel and reboot).
But i am not sure modifing this file is the best way.
It you update your selinux policy, changement will not be persistent.
I think it is better to build a selinux module for our squid.
Tiery
On Tue, May 18, 2010 at 2:34 PM, GIGO . wrote
2010-05-18 klockan 06:02 + skrev GIGO .:
2010/05/18 10:31:52| storeLateRelease: released 0 objects
2010/05/18 10:31:52| TCP connection to 127.0.0.1/3128 failed
setsebool -P squid_connect_any true
should help there.
Regards
Henrik
Hi All,
Your guidance is required regarding compilation.
I had compiled squid-3.0.STABLE25 with the following options:
./configure --prefix=/usr --includedir=/usr/include --datadir=/usr/share
--bindir=/usr/sbin --libexecdir=/usr/lib/squid --localstatedir=/var
--sysconfdir=/etc/squid
increase the
security of your proxy server.
But you will need to build a policy module for squid_kerb_auth witch
is not currently supported by selinux policy on redhat-like systems.
What distrib do you use ?
Tiery
On Wed, May 19, 2010 at 6:17 AM, GIGO . wrote:
Thank you i will give
Hi All,
I was running multiple instances of squid 3.0 Stable 25 on the same server
successfully. However i intend to run squid 2.7 3.1.3 on the same server now
reason being 2.7s enhance support of dynamic content caching. (Earlier the main
intention to use multiple instances was to give
Hi all,
Does squid_kerb_auth squid_kerb_ldap work fine in squid 2.7 like squid 3.x.
Are these the correct options?
./configure *...*--enable-basic-auth-helpers=LDAP
--enable-auth=basic,negotiate,ntlm
--enable-external-acl-helpers=wbinfo_group,ldap_group
:52 + skrev GIGO .:
Does squid_kerb_auth squid_kerb_ldap work fine in squid 2.7 like squid 3.x.
Yes.
./configure *...*--enable-basic-auth-helpers=LDAP
--enable-auth=basic,negotiate,ntlm
--enable-external-acl-helpers=wbinfo_group,ldap_group
--enable-negotiate-auth-helpers
Hi All,
can it be said as a generalization that one can allocate/fix 1/4 of physical
ram for cache mem objects. Will it holds true even when you are running
multiple instances???
please guide that how memory handling will be occuring in multiple instances
setup???cache_mem will
instances of squid on the same server.
fre 2010-05-21 klockan 06:38 + skrev GIGO .:
can it be said as a generalization that one can allocate/fix 1/4 of
physical ram for cache mem objects. Will it holds true even when you
are running multiple instances???
I would not generalize a rule
Hi all,
Please guide about runcache script behaviour uptil now i have only understood
this that this script will check and autorestart squid in case of failure. I
also assume that this script should be registered with init.d for
startup/shutdown. Where is this script located?(2.7 version).
Hi all,
I am able to run squid manually however whenever i try to run it through the
startup/shutdown script it fails. This is the same script working for squid 3.0
stable 25 however i am not being able to figure out that why its failing on
squid 2.7 stable 9? Neither of the instance starts
Hi all,
I request that please read my squid.conf file and guide me on the order of the
directives and any issue as i am unable to cache a single thing. Does it matter
the order of definition of the following?
1. storeurl program
2. refresh patterns
3 storeurl rewrite lists...
I assume :
-cache.org
Subject: Re: [squid-users] Running Multiple instances and reporting confusion.
GIGO . wrote:
Hi all,
I am running multiple instances of squid on the same machine. One
instance is taking the clients request and forwarding to its parent
peer at 127.0.0.1. All is going well. However
Hi all,
For some of my youtube videos i am getting the following error.
An error occured, please try again later.
I have confirmed that this only occur when squid is being used. find below the
relevant information in this regard.
cache_dir aufs
My store.logs are following
1275025642.358 SWAPOUT 00 8152 04FD0DB17EE9789F06B1386F1D6CDA4D 200
1275025483 1234793502 1275047700 video/x-flv 5142132/5142132 GET
:
On Fri, 28 May 2010 06:15:32 +
GIGO . wrote:
My store.logs are following
A. Because people read from top to bottom.
Q. Why should I not top post?
Ah, fun...
you know.
sdrawkcab daer lla tnac ew
so please dont
posting above the reference
what is top posting?
and my
,
Bilal
Subject: Re: [squid-users] Youtube -An error occured, please try again later
From: hen...@henriknordstrom.net
To: gi...@msn.com
CC: squid-users@squid-cache.org
Date: Fri, 28 May 2010 18:53:19 +0200
fre 2010-05-28 klockan 05:33 + skrev GIGO
] Youtube -An error occured, please try again later
GIGO . wrote:
Hi henrik,
Right now i don't have my access.log. (will share it with you after the
weekend) However let me tell you that after setting the negative_ttl to 0.
Apparently the problem was resolved. But i need to be sure about
Hi,
Please need your guidance regarding the regex used by squid. Is it bre ere or
perl? I assume that squid using a gnurep compatible version? Am i right?
In grep to use some metacharacter we have to encode it which are ‘\?’, ‘\+’,
‘\{’, ‘\|’, ‘\(’, and ‘\)’ does this hold true to write
23:11:08 +1200
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Confusion regarding regex
GIGO . wrote:
Hi,
Please need your guidance regarding the regex used by squid. Is it bre ere
or perl? I assume that squid using a gnurep compatible version? Am i
Date: Wed, 16 Jun 2010 23:11:08 +1200
From: squ...@treenet.co.nz
To: squid-users@squid-cache.org
Subject: Re: [squid-users] Confusion regarding regex
GIGO . wrote:
Hi,
Please need your guidance regarding the regex used by squid. Is it bre ere
or perl? I assume that squid
+ skrev GIGO .:
Hi Amos,
There is still some confusion regarding regex and any help will be great
please.
you told that squid uses posix regex but is it BRE or ERE???
Extended.
as for ERE according to my best understanding special characters are
not required to be escaped
Dear All,
Your help is required.
Problem: Setting up squid in an Active Directory environment. (where Active
Directory domain controllers, Windows clients, UNIX clients, and application
servers must all have a shared understanding of the correct host names and IP
addresses for each
1 - 100 of 119 matches
Mail list logo