Dear squid users, I'm new in this list, I'm QRT.
I have this problem:
When I try to access http://www.xtec.es:8800/usuaris/correuweb/ using
squid 2.5 stable11 I receive this error page
ERROR
The requested URL could not be retrieved
Dear sir
I did all of your recommanded from document step by step
I succeeded to joined to the domain and active directory , i can see the
domain users and
groups
kinit command works properly,
net ads testjoin
Join is OK
net ads join administrator
Joined 'squid-server' to realm 'TEST.COM'
Hi Joaquim,
If I try to connect to other websites in port 80 it work fine, but the =
other ports have the same error i.e. webmin:1, etc..
What can I put in squid.conf file to solve this?
Find the ACLs defining the allowed ports for requests:
acl Safe_ports port 80
acl Safe_ports port
8800 and 1 is not in the list of safe ports. you have to edit the
acl of the safe ports.
Joaquim Roca wrote:
Dear squid users, I'm new in this list, I'm QRT.
I have this problem:
When I try to access http://www.xtec.es:8800/usuaris/correuweb/
using squid 2.5 stable11 I receive this
hello,
you should add the following to your squid.conf :
acl Safe_ports port 8800
# Deny requests to unknown ports
http_access deny !Safe_ports
# Deny CONNECT to other than SSL ports
http_access deny CONNECT !SSL_ports
You could find example like this with other port (eg. 443) in your
Hi all,
any ideas how to block skype? I also using dansguardian content filtering.
Appently (I read) it is difficult to block skype..
kindly help??
regards
Daniel
Hi Abbas,
Unfortunately we're still experimenting with ntlm_auth ourselves -
it would probably be best to ask the samba user group your question. I
suspect your smb.conf may not be setup correctly...
Does anyone have any idea's on our problem below? Sorry to nag - we're
willing to try
Hi Abbas,
Unfortunately we're still experimenting with ntlm_auth ourselves -
it would probably be best to ask the samba user group your question. I
suspect your smb.conf may not be setup correctly...
Does anyone have any idea's on our problem below? Sorry to nag - we're
willing to try
there are a line in squid.conf with:
acl Safe_ports port 1025-65535 # unregistered ports
I think that include all ports upper 1025 in a safe_ports acl and there are
http_acces line:
http_access deny !Safe_ports
I try to delete http_access deny !Safe_ports and the problem persist.
QRT
Okay I have an update with more progress - it seems the problem is only to
do with ntlmssp. If I only have a basic authenticator - which looks like the
following, it works perfectly:
auth_param basic program /usr/optec/ntlm_auth.sh basic
auth_param basic children 10
auth_param basic realm
Okay I have an update with more progress - it seems the problem is only to
do with ntlmssp. If I only have a basic authenticator - which looks like the
following, it works perfectly:
auth_param basic program /usr/optec/ntlm_auth.sh basic
auth_param basic children 10
auth_param basic realm
Hello Everyone,
I would like to know how I can bind an IP address to a username in squid. So
let's say I have a user called user1 and a machine on IP 1.2.3.4. I would like
squid to log any requests that come from 1.2.3.4 as if the user user1 logged in.
Thanks,
Pieter De Wit
�This e-mail is
Hi,
I am trying to configure squid version
squid-2.5.STABLE12 as follows :
[EMAIL PROTECTED] squid-2.5.STABLE12]#
/usr/local/squid/sbin/squid -NCd1
I am getting following error
2005/11/09 18:03:40| Accepting HTTP connections at
0.0.0.0, port 3128, FD 15.
2005/11/09 18:03:40| WCCP Disabled.
Hello,
Realy no body have an idea ?
:(
L.G.
-Original Message-
From: Gix, Lilian (CI/OSR) *
Sent: Mittwoch, 2. November 2005 10:26
To: squid-users@squid-cache.org
Subject: [squid-users] Squid unreachable every hour and 6 minutes.
Hello,
I have a problem with my squid :
every hour
While squid is unreachable maybe the system writes a core file to the disk?
Please search for core files:
Login as root
cd /
find . -name core -print
The find command may run some minutes depending of the size of your disks.
Furthermore you should find out why WARNING: Disk space over
Are there any .core files for squid?
find / -name squid.core -print
It seems like your cache is crashing for some unknown reason - are you not
killing it every few hours somehow? Its highly unlikely that squid is dying
after EXACTLY 66 minutes. Also try using the latest version...
Are there any .core files for squid?
find / -name squid.core -print
It seems like your cache is crashing for some unknown reason - are you not
killing it every few hours somehow? Its highly unlikely that squid is dying
after EXACTLY 66 minutes. Also try using the latest version...
Are there anyone out there who has configured squid to perform this kind
of cacheing before? i.e. squid on wccp with cisco router while providing
http authentication to end-users.
If there is none and I wish doing so, would it really be possible?
kahyi
Original Message
Hello,
Thanks for support.
I suppose WARNING: Disk space over limit come from the fact that squid
restart by itself and so corrupt is cache.
But I don't know why every time it use more space than I allow it.
proxy1:~# cd /
proxy1:/# find . -name core -print
./dev/core
Great, thanks for your answer and questions :
1- I have a message form my browser (IE, Firefox) witch says the proxy
is unreachable. My MSN, yahoo messengers loose their access.
2- Ping like all other services still work perfectly. (SSH, Apache,
Ping,...)
3- Cache.log part is on the previous
Thanks for support.
I suppose WARNING: Disk space over limit come from the
fact that squid restart by itself and so corrupt is cache.
But I don't know why every time it use more space than I allow it.
I think this warning says that one of your disks is full. Check your disk space
with df
Here are results:
proxy1:/# find / -name squid.core -print
proxy1:/#
proxy1:/# df -k
Filesystem 1K-blocks Used Available Use% Mounted
on
/dev/cciss/c0d0p2 10083964 1606012 7965708 17% /
tmpfs 516744
Please observe the disk space with df -k in the time when squid is
unreachable. Does some value in the column Use% grow over 70 % ?
Werner
Here are results:
proxy1:/# find / -name squid.core -print
proxy1:/#
proxy1:/# df -k
Filesystem 1K-blocks Used
Try use my method posted earlier to search for code files. The fact that
your log suddenly shows squid restarting means it died unexpectedly. If
there is a core file it'll be squids problem - if not its probably something
else causing the problem.
Also, you should try clean out your cache_dir
Try use my method posted earlier to search for code files. The fact that
your log suddenly shows squid restarting means it died unexpectedly. If
there is a core file it'll be squids problem - if not its probably something
else causing the problem.
Also, you should try clean out your cache_dir
I already tried to :
- Stop Squid, delete swap.state, restart squid
- Stop Squid, format my cache parition, squid -z, start squid
- change cache_dir ufs /cache 5000 16 256 to cache_dir ufs /cache 100 16
256, squid -k restart.
- reboot completely the server
But nothing worked.
-Original
Here is what I have during the problem :
proxy1:/# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/cciss/c0d0p2 10083964 1606024 7965696 17% /
tmpfs 516744 0516744 0% /dev/shm
/dev/cciss/c0d0p191747 15993
Please repeat that again.
(1) stop squid
(2) find out wht are the cache directories squid uses, for example
# grep cache_dir squid.conf
cache_dir ufs /data1/squid_cache 6000 32 512
cache_dir ufs /data2/squid_cache 1 32 512
#
In this example
Dear List,
Is there any possibility to run FreeBSD (new,stable version) with GUI
support? if yes, what option should I choose during the installation? any
help much appreciated.
Thank you in advance
Kumara
The disk space is over limit error is not saying the disk is full. The
cache has reached the limit that's been set in the squid.conf file.
It could be causing squid to die, but how likely is it that this would be
the cause, if squid dies 6 minutes after every hour?
My suggestion is to check
did you check that nothing in cron start every hour ?
try : #crontab -l
-Message d'origine-
De : Gix, Lilian (CI/OSR) * [mailto:[EMAIL PROTECTED]
Envoyé : mercredi 9 novembre 2005 16:01
À : [EMAIL PROTECTED]
Cc : squid-users@squid-cache.org
Objet : RE: [squid-users] Squid unreachable
Hi Lilian,
The effect was exactly the same : squid stop every hour.
Are you sure that no cron job is running which terminates squid? Could you
please check
* /etc/crontab
* /etc/cron.hourly/
and do a crontab -l as root? If there is anything running, please check what
exactly that job is
see
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/install-post.html#DEFAULT-DESKTOP
especially section : 2.9.12 Configure X Server
-Message d'origine-
De : Kumara Jayaweera [mailto:[EMAIL PROTECTED]
Envoyé : mercredi 9 novembre 2005 16:31
A : squid-users@squid-cache.org
Objet
* On 09/11/05 18:31 +0300, Kumara Jayaweera wrote:
Dear List,
Is there any possibility to run FreeBSD (new,stable version) with GUI
support? if yes, what option should I choose during the installation? any
help much appreciated.
Thank you in advance
Kumara
FreeBSD GUI costs USD 1,000 and a
On Wed, 9 Nov 2005, Chin Kah Yi wrote:
Are there anyone out there who has configured squid to perform this kind of
cacheing before? i.e. squid on wccp with cisco router while providing http
authentication to end-users.
No.
If there is none and I wish doing so, would it really be possible?
I am running 2.5.STABLE12. When my user's do searches on a couple of
websites that have long Query Strings, they receive Invalid Response.
If you truncate the query string the query works just fine. If you do
the same query, without using the proxy, they work just fine.
I have also placed this
Look in squidGuard.log for the reason SG is crashing. Fix that,
and squid will stay up too.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mark Adams
Sent: Wednesday, November 09, 2005 11:52 AM
To: squidguard@squidguard.org
Subject: The redirector
Attached is a sample query string and error response.
GET
/articles/asearch.html?which_index=bothmeta-dc=10func=simple_searchfi
eld-Name=stowecollection-label=black+history+monthcollection-label=wom
ens+history+monthcollection-label=asian+pacific+american+heritage+month
Dave Raven wrote:
Okay I have an update with more progress - it seems the problem is only to
do with ntlmssp. If I only have a basic authenticator - which looks like
the following, it works perfectly:
However, when I use ntlmssp in the squid config, shown below, it does not
work:
-Original Message-
From: ads squid [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 09, 2005 3:42 AM
To: squid-users@squid-cache.org
Subject: [squid-users] Getting error Too few basicauthenticator
processes are running
Hi,
I am trying to configure squid version
Abbas Salehi wrote:
I succeeded to joined to the domain and active directory , i can see the
domain users and groups
net ads testjoin
Join is OK
net ads join administrator
Joined 'squid-server' to realm 'TEST.COM'
But ntlm_auth does not work properly,
I have following error when i
Pieter De Wit wrote:
I would like to know how I can bind an IP address to a username in
squid. So let's say I have a user called user1 and a machine on IP
1.2.3.4. I would like squid to log any requests that come from 1.2.3.4 as
if the user user1 logged in.
So you want Squid to accept
Hi Adam,
We are currently talking to samba, but we are able to join the
domain. Where we sit right now is that if we use -basic instead of -ntlmssp
it works fine. I've narrowed it down to the password that's the problem -
its obtaining the user, domain and workstation just fine. All the
Hi Adam,
We are currently talking to samba, but we are able to join the
domain. Where we sit right now is that if we use -basic instead of -ntlmssp
it works fine. I've narrowed it down to the password that's the problem -
its obtaining the user, domain and workstation just fine. All the
Dave Raven wrote:
We are currently talking to samba, but we are able to join the
domain. Where we sit right now is that if we use -basic instead of
-ntlmssp it works fine. I've narrowed it down to the password that's the
problem - its obtaining the user, domain and workstation just fine. All
We have a few production squid proxy servers running various STABLE
versions of squid 2.5 and are encountering some issues as we upgrade our
Domain controllers from windows 2000 to windows 2003. The proxy servers
query the LDAP directory for user access control. Ideally, we would like
all
Hi,
At 22.25 09/11/2005, Colin Farley wrote:
So, it seems that Windows 2003 domain
controllers have added security that stops searches beginning from the base
of the domain and searches must start within an ou. Has anyone encountered
this? Are there any fixes that anyone is aware of? Any
Hello,
Thanks for your help :
proxy1:~# crontab -l
0 0 * * * /etc/webmin/webalizer/webalizer.pl /cache_log/access.log
proxy1:~# more /etc/crontab
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# m h dom mon dow
48 matches
Mail list logo