I am the author of ufdbGuard which is based on squidGuard.
ufdbGuard is free and can be used with both free and commercial databases.
-Marcus
a bv wrote:
Hi,
What is /are the popular /commanly used open source (and maybe also
the other free ones) URL/content filtering solution/software. And
Yet another yes from me, used within our school, and works perfectly for
900+ students and 200+ staff. Easy to configure, documented well and
there are plenty of resources on a google search to get you going
perfectly.
Alex
-Original Message-
From: Marcus Kool [mailto:[EMAIL PROTECTED]
Hi
I'm looking for a howto or some docs to show how to do load balancing
. I have a single cisco router and would like to have two or more
squid caches. in a load balanced configuration .. Any suggestions ?
Thanks
Thanks Chuck.
Unfortunately, this little 1U server does not have room for more than
1 hard drive. :-(
Do you have any specific config options in mind about how to best
use the memory?
Thank You,
Ed
On Sun, Nov 9, 2008 at 6:12 PM, Chuck Kollars [EMAIL PROTECTED] wrote:
... It's my
ufdbGuard is the best. You can get it from www.urlfilterdb.com
I like it because it's fast, updated frequently, easy to use and
customize. And the guy running it is extremely helpful.
No I am not related. I've used others in the past and when I finally
upon this one, I felt such a relief. The
Henrik Nordstrom wrote:
From the error it sounds like it has declared the peer down.
But why? I'm thinking forwarding loops.
On mån, 2008-11-10 at 11:35 +0700, ░▒▓ ɹɐzǝupɐɥʞ ɐzɹıɯ ▓▒░ wrote:
here is my squid .conf
===
http_port 2210 transparent
icp_port 3130
snmp_port 3401
Hello Gregory,
While setting up a squid+wccp solution i found this information really
helpful:
http://www.reub.net/node/3
Best Regards!
Egi
Gregory Machin wrote:
Hi
I'm looking for a howto or some docs to show how to do load balancing
. I have a single cisco router and would like to have
Martin Mulder wrote:
Hi,
I have (maybee a stupid) question.
I have an apache server as reverse proxy, squid as caching server and
Zope/Plone as backend servers.
Senario:
1) Apache gets a request for my.domain.com
2) Apache does a ProxyPass to my balancer
3) I have 2 sticky vhosts in apache
Ubuntu - apt-get install ufdbGuard worked here, may have to locate the
correct repository for it though.
Not sure on any other formats
Alex
-Original Message-
From: a bv [mailto:[EMAIL PROTECTED]
Sent: 10 November 2008 14:27
To: Alex Huxham
Subject: Re: [squid-users] URL Filtering for
On tis, 2008-11-11 at 03:14 +1300, Amos Jeffries wrote:
Henrik Nordstrom wrote:
From the error it sounds like it has declared the peer down.
But why? I'm thinking forwarding loops.
Forwarding loops is logged very aggressively in cache.log as such, and
don't result in an error to the user.
Hi,
I have (maybee a stupid) question.
I have an apache server as reverse proxy, squid as caching server and
Zope/Plone as backend servers.
Senario:
1) Apache gets a request for my.domain.com
2) Apache does a ProxyPass to my balancer
3) I have 2 sticky vhosts in apache which are the balancer
Henrik,
I read FAQ and implemented almost most of the suggestion to reduce
memory usage. I am not much concern about memory usage as there plenty
of available memory but the issue is CPU usage goes high up to 100%
and slows down squid response once squid grows beyond allocated
cache_mem size .
From the error it sounds like it has declared the peer down.
On mån, 2008-11-10 at 11:35 +0700, ░▒▓ ɹɐzǝupɐɥʞ ɐzɹıɯ ▓▒░ wrote:
here is my squid .conf
===
http_port 2210 transparent
icp_port 3130
snmp_port 3401
cache_mgr admin
emulate_httpd_log off
cache_replacement_policy heap
-Original Message-
From: Alex Huxham
Sent: 10 November 2008 09:52
To: 'a bv'
Subject: RE: [squid-users] URL Filtering for Squid
Yes and no, there are free ones, however http://urlblacklist.com allows
you a FREE copy, only ONCE though, your first download of the blacklist
is free, its
Hi,
What is /are the popular /commanly used open source (and maybe also
the other free ones) URL/content filtering solution/software. And who
are maintaining url databases?
Regards
On Mon, Nov 10, 2008 at 11:11 AM, zhang yikai [EMAIL PROTECTED] wrote:
hi all,
I installed squid and it work properly, then I run dansguardian, connect to
squid port 3128 ok, but when I using dansguardian port 8080 as a proxy, I got
the error message (111) Connection refused, I don't
Hi,
I would like to setup squid proxy server for NTLM proxying (i.e.
connection pinning) + ICAP (clamav). I hope someone could advise if
there is any catch I need to pay attention with.
Thanks a lot.
John Mok
hi all,
I installed squid and it work properly, then I run dansguardian, connect to
squid port 3128 ok, but when I using dansguardian port 8080 as a proxy, I got
the error message (111) Connection refused, I don't know what is the problem?
thank you.
On mån, 2008-11-10 at 09:50 +0100, yagh mur wrote:
http_access allow to_mynetwork users1
http_access allow password users1
http_access allow mynetwork
http_access deny all
I think the above should be
http_access allow mynetwork to_mynetwork
http_access allow mynetwork users1
http_access
Hi all,
I've to configure Squid2 in order to ask for a password if a user go
to an external address
and no password have to be asked if the destination address is internal
I've this rules:
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl
3.1 is certainly ready for testing. That's why we started making beta
releases (3.1.0.X).
Please give it a try and report back your findings. I don't think this
is a setup that is commonly tested so it's very good if you can test
this now while the release is actively being tested.
Regards
On sön, 2008-11-09 at 16:11 +0900, Mikio Kishi wrote:
Hi, would you tell me the ICAP implementation on squid.
- Question.1
If there is no icap_access setting,
The default icap access control is allow or deny ?
It looks allow...
Should be deny.. icap_access selects which icap class to
3.1 is certainly ready for testing. That's why we started making beta
releases (3.1.0.X).
Please give it a try and report back your findings. I don't think this
is a setup that is commonly tested so it's very good if you can test
this now while the release is actively being tested.
Regards
I've just rolled back a failed Squid migration from 2.6 to 3.0, and I'm
looking for reasons why it failed. I have been successfully using the
latest Squid 2.6 to http-accel a pool of backend web servers, with a
load-balancer in front to direct traffic.
The load-balancer hits the squid server
all :
it's works now
but from Internal
from External ( internet ) it's look like Domain without any space hosting
i remove :
http_port 80 accel defaultsite=monitor.gpi-g.com
cache_peer 202.169.51.118 parent 80 0 no-query originserver name=myAccel
acl our_sites dstdomain monitor.gpi-g.com
thanks for your help, I run wget
[EMAIL PROTECTED] logs]# wget www.google.com
--09:19:40-- http://www.google.com/
= `index.html'
Connecting to 10.0.2.110:9090... connected.
Proxy request sent, awaiting response... 403 Forbidden
09:19:41 ERROR 403: Forbidden.
this is the info from
Thanks for your response
That message means there was no HTTP/1.0 tag on the request line.
Squid begins assuming HTTP/0.9 traffic.
Squid 2.6 handled these fine, and my configuration hasnt changed, so
was
there something introduced in Squid3 that demands a hostname?
no.
Something has to
Thanks for your response
That message means there was no HTTP/1.0 tag on the request line.
Squid begins assuming HTTP/0.9 traffic.
Squid 2.6 handled these fine, and my configuration hasnt changed, so
was
there something introduced in Squid3 that demands a hostname?
no.
Something has
all :
it's works now
but from Internal
from External ( internet ) it's look like Domain without any space hosting
i remove :
http_port 80 accel defaultsite=monitor.gpi-g.com
cache_peer 202.169.51.118 parent 80 0 no-query originserver name=myAccel
acl our_sites dstdomain monitor.gpi-g.com
thanks for your help, I run wget
[EMAIL PROTECTED] logs]# wget www.google.com
--09:19:40-- http://www.google.com/
= `index.html'
Connecting to 10.0.2.110:9090... connected.
Proxy request sent, awaiting response... 403 Forbidden
09:19:41 ERROR 403: Forbidden.
this is the info
On Tue, Nov 11, 2008 at 9:31 AM, Amos Jeffries [EMAIL PROTECTED] wrote:
Ahh okay. cache_peer 202.169.51.118 should be the web server IP as seen
from Squid (internal IP if squid is internal, external IP if squid is
external, localhost maybe if squid is on same machine).
Amos
so i should to
- Original Message -
From: Amos Jeffries [EMAIL PROTECTED]
To: zhang yikai [EMAIL PROTECTED]
Cc: Kinkie [EMAIL PROTECTED]; squid-users@squid-cache.org
Sent: Tuesday, November 11, 2008 10:38 AM
Subject: Re: [squid-users] Run squid2.5.6 and dansguardian got error message:
(111) Connection
Now I found when run squid and dansguardian in different machine it will be
ok, but can't work in one, what is the problem?
Thanks for your help
- Original Message -
From: Kinkie [EMAIL PROTECTED]
To: zhang yikai [EMAIL PROTECTED]
Cc: squid-users@squid-cache.org
Sent: Monday,
Hi,
I am a squid newbie. I am trying to set up daily download quotas for NCSA
authorized users. I have a daemon running which checks the log files, and
whnever the download limit is reached (for a particular user), it blocks
that user in the config and reconfigures squid (squid -k reconfigure)
On tis, 2008-11-11 at 15:24 +1300, Amos Jeffries wrote:
Not fully 1.1, but from (0.9 + 1.0) to fully 1.0 + partial 1.1. Which is
weird because 2.6 went almost fully 1.0 as well quite a while back.
From this discussion it seems Squid-3 no longer accepts the obsolete
HTTP/0.9 style requests.
On tis, 2008-11-11 at 11:36 +0800, zhang yikai wrote:
- DIRECT/10.0.2.110 text/html
1226418445.662137 127.0.0.1 TCP_MISS/503 1883 GET http://www.google.com/
- DIRECT/10.0.2.110 text/html
Why does your Squid server resolve www.google.com to 10.0.2.110?
Regards
Henrik
signature.asc
10.0.2.110 is the machine run squid and dansguardian, thank you for your reply.
- Original Message -
From: Henrik Nordstrom [EMAIL PROTECTED]
To: zhang yikai [EMAIL PROTECTED]
Cc: Amos Jeffries [EMAIL PROTECTED]; Kinkie [EMAIL PROTECTED];
squid-users@squid-cache.org
Sent: Tuesday,
37 matches
Mail list logo
