be already in
"hashtable form".
Does kamailio has any way to solve this or should i use external tools?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Greetings,
Is there an automated way of masking\encoding\encrypting the Contact header
once it goes through a Kamailio proxy and have it restored?
I'm using uac_replace_from() and uac_replace_to() for changing these values
and having them restored automatically. Is there any tool like this for
Thank you for your answer Alex.
Wheb you say you have dealt with this, do you mean this exact scenario with
re-invites and ACK or just with general packets order?
I'll look into your solution, thank you.
Best Regards,
Duarte Rocha
Na(o) terça, 5/02/2019, 12:42, Duarte Rocha
escreveu
roughly through the same processing methods
and should take took the same time to be be relayed. What can be the reason
for this?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org
Greetings,
Thank you for your answer.
I have my destinations set as a sip uri with ip "sip:xxx.xxx.xxx.xxx:".
Is there a way to increase that limit?
Best regards,
Duarte Rocha
Na(o) quarta, 23/01/2019, 08:09, Daniel-Constantin Mierla
escreveu:
> Hello,
>
> for keep
Greetings,
Is there a limitation to the number of Gateways probed by Dispatcher?
I have several gateways configured to be probed, but the OPTIONS is only
sent to the first 16? Is there a configuration regarding this?
Thanks in advance,
Duarte Rocha
OPTIONS at every 60 seconds it only sends to 16 destinations.
Is there a configuration that limits this? What can i do to have every
gateway probed?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https
OPTIONS at every 60 seconds it only sends to 16 destinations.
Is there a configuration that limits this? What can i do to have every
gateway probed?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https
Thank you for your answer. Yes, it works.
My problem is I wasn't including the view in the table version.
You can delete the thread if you want.
Best Regards,
Duarte Rocha
Na(o) terça, 8/01/2019, 12:43, Daniel-Constantin Mierla
escreveu:
> Hello,
>
> should be possible -- af
Greetings,
Is it possible for Dispatcher to use a view for "table_name" instead of a
regular table?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/l
Thanks,
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
started Kamailio
and i could do the changes in /etc/default without any problem. Does this
happen for a reason?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman
st Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
more than one result, do forking using the the SAPs in
the results, sending multiple OPTIONS through the multiple sockets. In this
case, if only one of the OPTIONS is answered, will the gateway still appear
as "Active" ?
Best Regards,
Duarte Rocha
Na(o) quinta, 27/12/2018, 16:02, Du
Thanks for your answers, it seems to be just what i needed.
Best regards,
Duarte Rocha
Na(o) quinta, 27/12/2018, 16:02, Duarte Rocha
escreveu:
> Greetings,
>
> I have Kamailio with the Dispatcher module and it's probing mechanics set
> up.
>
> I want to be able to access t
Greetings,
I have Kamailio with the Dispatcher module and it's probing mechanics set
up.
I want to be able to access the OPTIONS request generated by Kamailio in
the request_route or somewhere else in the configuration file in order to
modify it. Is that possible?
Best Regards,
Duarte Rocha
to
the desired number of processes and shared\private memory defined?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Greetings,
How can i ibcrease permanently the Kamailio default private and shared
memory size?
Thanks in advance,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr
connections.
Why does this happen and can i set a a number of threads and/or sql
connections that doesn't change with the number of "listen" parameters that
i have ?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.ka
With "eq" it works as it should.
Thanks :)
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
or 0.
I'm using the "cmp_str()" now in order to avoid this issue.
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
access to IP and Port. Is it
possible to Dispatcher to return another fields from the same table row? Or
return any other way to identify the row.
Thank you for your help.
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users
Hey,
I've been using the Dispatcher module with great results. But now, i want
to be able to have some gateways to belong to more than one group set.
To achieve that, i'm duplicating the Gateway in the Dispatcher's table and
give it a different group set. However, if i do this, Dispatcher will
Greetings,
I have some questions about Dispatcher0s modules general behaviours.
Can Dispatcher use two tables to read values from?
If I can't use two tables, is it possible to read them from a Mysql View?
I want to be able to have a Gateway belonging to more than one Gateway Set.
By doing so,
uot;a");
It doesn't seem to work. Any ideas why?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
this since i can't really be
sure that they won't be erased by any client's CPE or endpoint.
Any ideas on this ?
Thanks
Cheers,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailma
Thanks for all your help.
With record_route_preset(string[,string2]) i can place the parameters as i
want. The only problem is that using record_route_preset, it doesn't add
all the parameters that it usually does, like "vst", vsf" and "r2", only
the ftag.
However, it might be possible get those
I want to add to Kamailio's. This INVITE arrives at Kamailio with no
Record-Route. It leaves Kamailio with two Record-Routes since i'm using one
IP for receiving and another for sending.
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
When Kamailio receives the INVITE, it relays it with two Record-Route like
this :
Record-Route:sip:IP1;ftag=;vst=xxx;vsf=xxx
Record-Route:sip:IP2;ftag=;vst=xxx;vsf=xxx
What i want is :
Record-Route:sip:IP1;ftag=;vst=xxx;vsf=xxx;NEW_PARAMETER=10
Can you show me where? I've tried add_rr_param() but it still adds every
parameter to the two record-routes
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
to the two Record-Route Headers.
Is there a way to do what i want without me re-writing the headers directly
?
Cheers,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr
that those parameters
won't be deleted or changed?
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Greetings,
Is there a way to choose the encoding algorithm that builds the vsf and vst
parameters in the Record-Route?
What is the default method that Kamailio uses for this ?
Thanks in advance,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr
That is perfect. Thanks a lot.
2018-08-01 17:09 GMT+01:00 Duarte Rocha :
> Greetings,
>
> I thought about that but i wasn't sure it would be safe. But, in this
> case, the Request-URI domain will be the only place where Kamailio will
> look to find out the destination right wi
Greetings,
I thought about that but i wasn't sure it would be safe. But, in this case,
the Request-URI domain will be the only place where Kamailio will look to
find out the destination right within the dialog right? I'm going the
statelless way, so that might be the correct answer.
Thanks for
Greetings,
I have a Kamailio server set up without Registers. I'm using Dispatcher
module for balancing and selecting the destinations. I need to do some
changes in the message according to the chosen destination. If it's the
first INVITE, after Dispatcher operations, i can do it using $dd or $du
You're right, it is application/sdp and the back slash works as escape
character.
However, a new problem came. I'm using this, since someone upstream is
adding \r\n to a part of the body :
replace_body_all("application\/sdp\r\n\r\n", "application/sdp\r\n");
The regex finds the application/sdp
Greetings,
What kind of regex does textops module uses?
I'm trying to find the string "application\sdp" but i can't the escape
character for the "\".
Thanks in advance
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
Greetings,
Please help me understand the reason and source of this behaviour on
Kamailio.
I receive a 200OK to a RE-INVITE that has :
Session Name (s) : MySession
Connection Information (c) : IN IP4 xxx.xxx.xxx.xxx
Then, Kamailio routes the 200OK to it's destination, and it leaves Kamailio
Greetings,
Is there any method on Kamailio that automatically rewrites the headers in
its compact form ?
I know how i can do it by re-writing each of the eligible headers, but i
was wondering if there is any way to do it automatically.
Thanks
___
Greetings,
I'm doing some work with the AUTH routes and modules, and sometimes i get a
"403 Not relaying" answer when the INVITE has a parameter in the R-URI.
That parameter was not included in the REGISTER.
I think it's this part of the code that throws this reply :
# if caller is not local
Greetings,
I'm getting a query result in a $xavp. I'm trying to copy the entire
structure to a new $xavp like this : $xavp(Valid_Acd_Results) =
$xavp(ACD_Query_Result[$var(iterator)]);
However, i can't retrieve the value with : xnotice(" Mode =
$xavp(Valid_Acd_Results=>TBK_AcdMode)"); since it
Greetings,
I have set the auto_inv_100() parameter from the TM module so i can get
automatic "100" replies to the INVITE. However, in some cases i want to
reply to the INVITE with provisional responses (181 for example) and i
would like that "100" could be sent before the "181".
In order to
Greetings,
Does the function "add_diversion() present in the "Diversion" module allows
me to introduce other parameters (privacy, counter, etc) or is it only for
the "diversion-reason"?
If it doesn't let me do that, how can I add the Diversion with insert_hf()
and make sure the headers are added
It works. Thanks a lot!!
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hey
Is there any variable that retrieves me the destination of a reply?
I've used the To header for the domain, but i can't seem to get the
destination port.
Any help ?
Thanks
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
Greetings,
I'm using the Dialog module and the profile functions in order to limit the
number of channels that a Calling Number can use.
I'm using profile with values and the number in E164. However it doesn't
work correctly and the value are not correctly updated. I've tried to give
a a value
Greetings,
I'm having some trouble with the syntax used in the {re.subst,expression}
method. What i want to do is add a prefix to a capture group.
I can make it work like that /^[0-9]+/prefix$tU/ but this solution is far
from perfect since i may not need the entire $tU.
I would like to use it
Greetings,
I have a doubt about the flag 16 used in nat_uac_test() belonging to the
module NATDETECT.
In the documentation, the following is stated :
*16* - Test if the source port is different from the port in the “Via”
header
I have some situations that I receive a request from port 5060 and
n event of a failure and i switch to a kamailio in a different machine i
will be able to do the To\From restore.
Thanks in advance,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hey
I need to create several testing and validation processes for the deploy of
an SBC and i would like to know your opinion on the best tools to use.
I need to create an automated group of testing scenarios and validation of
the packets sanity and SIP compliance. I also would like to validate
Hey Everyone
I'm setting up a load testing scenario for my Kamailio. In order to do
that i've created another Kamailio to answer "200 OK" to an Invite in order
to simulate a call being answered.
One of the scenarios I need to test is reading values from the ISUP IAM or
ACM body.
Here's the
CPS, 6k active calls, with
Dispatcher, Database, Number Normalizations and other operations. What are
good settings for CPU, RAM Memory, PKG_SIZE and SHM_SIZE?
Thanks for the help,
Best Regards,
Duarte Rocha
___
Kamailio (SER) - Users M
i can get calls to work
with keeping the Contact intact and changing it to the new number. What is
the most correct approach?
Cheers,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-b
Hey guys,
I have two issues about Session Timers that need some clarification.
1) I have my Kamailio between my clients CPE's and my GW to the PSTN. I
want to configure it in a way that i always try to make the CPE do the
refreshing so I can save resources on my kamailio and in the GW. If the
Thanks for the reply, that works :)
What about if I want to delete or overwrite an header ?
I need to change to To Header. If i use append_reply() will it overwrite ?
Cheers
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
Hey everyone.
Right now i'm doing a redirect server and i'm trying to sinalize the
redirection using a 3xx reply. In order to do that, according the RFC I
need to add a Contact and Diversion header. How do i do that ? i'm creating
the reply with send_reply() but i can't seem to find a way to add
Hey!
I'm trying to use the KeepAlive options avaliable in the Dialog modules.
For that I use the function dlg_set_property() like this :
dlg_set_property("timeout-noreset");
dlg_set_property("ka-dst");
dlg_set_property("ka-src");
However, kamailio can't seem to get the answers from "ka-src".
Greetings Alex,
That's exactly what I need, thanks a lot.
Cheers
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Greetings,
I want to add a new IP to eht0 in my proxy and i want Kamailio to be able
to listen to it without me having to restart it. I already have the
"listen" parameter set to listen=udp:eth0:5060. Is there any way to reload
this parameter it in runtime in order to include the new ip? Is there
Hey everyone.
I'm doing some Calling Number and Called Number normalization at the
beggining and end of the Kamailio. At the end, i'm doing it in the Dispatch
Route.
In order to change the numbers, i use uac_replace_to() and
uac_replace_from(). However, i don't have a function like this for the
Hey
I'm trying to do some normalization on my Calling Number after Kamailio
chooses the Gateway in which it will deliver the request. So, i'm trying to
do the operation in the DISPATCH route. However, in this route,
msg_apply_changes() doesn't work and returns (-1).
I've tried to do this on a
Greetings,
I have a Kamailio that is hosted on multiple IP's. Each client connects to
an IP and there is another IP that communicates with the PSTN.
The problem is that I don't want any client "seeing" any IP besides his. If
the client (connected to kamailio's IP 1.1.1.1) receives an request
Greetings,
Is there a way to use the NATHELPER functions with a variable insted of a
string with the value ?
For example, I can do "fix_nated_sdp("11");" but Kamailio throws an error
if i use
"fix_nated_sdp("$(var(nat_fix)");" or any other variations.
How should i proceed to be able to do this
d res->rs.len and both values are fine. I just can't access
them in the configuration file.
Thanks in advance for your help!
Cheers,
Duarte Rocha
___
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mai
101 - 165 of 165 matches
Mail list logo