in the config on each location and correlate with the error log.
-ovidiu
On Wed, Nov 24, 2021 at 22:37 Daniel W. Graham
mailto:d...@cmsinter.net>> wrote:
That’s what I’m looking to do, but there are lots of locations in the config
file json is used and the error doesn’t give any indication wha
@lists.kamailio.org
Subject: Re: [SR-Users] JSON Error
Are you verifying the document is valid JSON?
Fred Posner | palner.com
Matrix: @fred:matrix.lod.com
o: +1 (212) 937-7844
On 11/24/21 7:47 PM, Daniel W. Graham wrote:
> My log is filled with this and have been unsuccessful locating
> addi
My log is filled with this and have been unsuccessful locating additional
information by increasing debug level.
Any thoughts on how to quickly isolate?
/usr/local/sbin/kamailio[7678]: ERROR: jansson [jansson_funcs.c:48]:
janssonmod_get_helper(): json error at line 1, col 0: '[' or '{'
This was already pointed out, $mb.
Thanks,
-dan
On Jul 2, 2021, at 4:40 PM, Daniel W. Graham wrote:
__
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org
Important: keep the mailing list
ity(), and that doesnt show up in $mb or accessible by $hdr()
either.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "mico...@gmail.com"
Reply-To: "mico...@gmail.com"
Date: Friday, July 2, 2021 at 1:46 PM
To: Danie
()
either.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "mico...@gmail.com"
Reply-To: "mico...@gmail.com"
Date: Friday, July 2, 2021 at 1:46 PM
To: Daniel Graham
Cc: "Kamailio (SER) - Users Mailing List"
Su
as no effect?
Or you don't have msg_apply_changes() in the config and thus not executed?
Cheers,
Daniel
On 02.07.21 15:10, Daniel W. Graham wrote:
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021,
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla wrote:
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "mico...@gmail.com"
Reply-To: "mico...@gmail.com"
Date: Friday, Jul
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "mico...@gmail.com"
Reply-To: "mico...@gmail.com"
Date: Friday, July 2, 2021 at 2:09 AM
To: "Kamailio (SER) - Users Mailing List" , Da
ly looked them side by side and
…. “Hey! This one’s missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkauf...@nexvortex.com<mailto:bkauf...@nexvortex.com>
24 hour client support: 855.639.6300
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Ka
f...@nexvortex.com>
24 hour client support: 855.639.6300
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul
what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkauf...@nexvortex.com<mailto:bkauf...@nexvortex.com>
24 hour client support: 855.639.6300
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List ;
at 2:37 AM, Daniel-Constantin Mierla wrote:
Maybe the parameters provided to generate the header have some invalid values.
Can you give the relevant config snippets for generating the header?
Cheers,
Daniel
On 01.07.21 05:31, Daniel W. Graham wrote:
Here is an example,
Users Mailing List"
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that
the identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that t
That’s the same way I am doing it, I was just trying to do a verification that
the identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header
would decode but payload wouldn’t.
Daniel W. Graham, CTO
alues for latency_limit_action and latency_limit_action than what is
printed in the logs.
Their values are in microseconds, so based on the logs the execution is 1-2
milliseconds.
Cheers,
Daniel
On 20.06.21 08:02, Daniel W. Graham wrote:
5.1
I made all changes listed in:
https://www.kamailio.org/wiki/instal
5.1
I made all changes listed in:
https://www.kamailio.org/wiki/install/upgrade/5.1.x-to-5.2.0
https://www.kamailio.org/wiki/install/upgrade/5.2.x-to-5.3.0
https://www.kamailio.org/wiki/install/upgrade/5.3.x-to-5.4.0
https://www.kamailio.org/wiki/install/upgrade/5.4.x-to-5.5.0
Daniel W. Graham
Receiving constant errors for all functions after upgrade to 5.5, any change
that could have caused this?
ERROR: [core/action.c:1598]: run_actions(): alert - action [corefunc
(16)] cfg [/usr/local/etc/kamailio/kamailio.cfg:968] took too long [1251 us]
ERROR: [core/action.c:1598]:
The space is just a result of me sanitizing the example.
The issue here is most certainly the way the B2BUA is handling the contact
alias sent by kamailio. I will have to come up with another plan.
Thanks for the input!
-dan
On 4/12/20, 12:51 AM, "sr-users on behalf of Alex Balashov"
Users Mailing List"
Subject: Re: [SR-Users] Callee BYE routing issue
From:
;tag=64f4b712
Something wrong with the above From, no closing ">", also there's no place for
alias in From headers.
On Fri, Apr 10, 2020 at 1:25 AM Daniel W. Graham
mailto:d...@cmsinter.net>
Have an issue with BYE routing in a lab setup, any suggestions on what I should
be looking at?
Topology:
UA1 <-> NAT device 1 <-> Proxy1 <-> Registrar/B2BUA <-> Proxy1 <-> NAT device
1 <-> UA2
All UA to UA calls flow through B2BUA.
All IP’s are public except for UA1 and UA2.
-Both
for nat_traversal param and see if works.
Cheers,
Daniel
On 04.04.20 03:05, Daniel W. Graham wrote:
Register time is not detected when add_contact_alias() is enabled:
With add_contact_alias() :
Apr 3 20:45:01 host /usr/local/sbin/kamailio[28022]: DEBUG: {2 2 REGISTER
ussion...
Can you get all log messages with debug=3 when the keepalive is attempted to be
sent?
Cheers,
Daniel
On 03.04.20 21:51, Daniel W. Graham wrote:
I resolved all of the routing issues. Only issue I’ve got now is nat_keepalive
not working when used with set/add_contact_alias().
-
n Kamailio system? ACK and BYE
should be routed based on Contact of INVITE/200ok and record-route headers, no
longer related to REGISTER (only initial INVITE should rely on registration
data).
Cheers,
Daniel
On 02.04.20 22:11, Daniel W. Graham wrote:
Same behavior with add_contact_alias()
-
updated by
set_contact_alias().
Cheers,
Daniel
On 02.04.20 18:45, Daniel W. Graham wrote:
I was able to fix all issues, but have one partially lingering.
For register only, if I apply: set_contact_alias() with nat_keepalive(),
keepalives are not sent. Removing set_contact_alias() fixes this.
I *
s] nathelper without usrloc
Nothing else comes to mind based on info provided. May be you can send some sip
traffic captures and elaborate?
Regards,
--Sergiu
On Tue, Mar 31, 2020 at 10:29 PM Daniel W. Graham
mailto:d...@cmsinter.net>> wrote:
Thanks, yeah I had already changed that, but regi
tact's Path address is correct
Cheers,
--Sergiu
On Tue, Mar 31, 2020 at 7:34 PM Daniel W. Graham
mailto:d...@cmsinter.net>> wrote:
It did help, I read that a couple times already but something is still not
right, and its only because of the decoupling of the registrar. I need to do
more debug
.
-dan
On Mar 31, 2020, at 7:15 PM, Alex Balashov wrote:
>
> Daniel,
>
> Might this article be of aid?
>
> http://www.evaristesys.com/blog/server-side-nat-traversal-with-kamailio-the-definitive-guide/
>
> -- Alex
>
>> On Tue, Mar 31, 2020 at 11:12:2
,
From what you are describing, my understanding is that the Registrar is the
PBX, kamailio is acting as an edge proxy. If so, doesn't the PBX/registrar have
NAT traversal/keepalive mechanisms of its own?
Regards,
--Sergiu
On Tue, Mar 31, 2020 at 1:55 PM Daniel W. Graham
mailto:d...@cmsinter.net
I’ve been missing with this for a while and seem to be missing something. Any
suggestions on what is missing here?
Trying to use set_contact_alias() and handle_ruri_alias() from nathelper module
and nat_keepalive from nat_traversal module, without registrar.
I had register keepalive working,
I now see this comes from nathelper module, thanks!
-dan
-Original Message-
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Tuesday, March 12, 2019 5:02 PM
To: mico...@gmail.com; Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Replicate REGISTER and save original
On the sending host, the value of $avp(received) has to be set manually?
-dan
-Original Message-
From: Daniel-Constantin Mierla
Sent: Tuesday, March 12, 2019 8:09 AM
To: Kamailio (SER) - Users Mailing List ; Daniel
W. Graham
Subject: Re: [SR-Users] Replicate REGISTER and save
This worked out. Thanks again.
-dan
-Original Message-
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Monday, March 11, 2019 4:53 PM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Replicate REGISTER and save original received value
Ok, that’s why I was asking
Subject: Re: [SR-Users] Replicate REGISTER and save original received value
On Mon, Mar 11, 2019 at 08:46:01PM +, Daniel W. Graham wrote:
> No problem. I didn’t consider either option but like the first idea,
> how do you recommend overriding the received parameter value?
Well, now that
() after resolution on the proximate hop to the endpoint, it
will strip off the alias parameter, if present, and use the values stored
therein as the destination URI.
—
Sent from mobile, with due apologies for brevity and errors.
> On Mar 11, 2019, at 4:23 PM, Daniel W. Graham wrote:
>
&
}
}
}
There's a 50% chance I could be mistaken, but I vaguely remember that
replication of 'received' was an issue in some earlier version of Kamailio than
that.
-- Alex
On Mon, Mar 11, 2019 at 05:13:31PM +, Daniel W. Graham wrote:
> When forwarding / replicating a REGIS
When forwarding / replicating a REGISTER, is it possible (without using DMQ)
for the receiving host to save the contact with the original received parameter?
REGISTER > server 1 (received set) > forward > server 2 (received not set)
add_rcv_param will set received to server 1 IP, but I'm
This has something to do with TLS config.
If tls settings are removed/disabled in kamailio config file, kamcmd works
normal. I havent identified the issue any further.
-dan
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Tuesday, March 5, 2019 1:19 PM
To: Kamailio (SER) - Users Mailing
Any ideas on the kamcmd issue? Executing any kamcmd command hangs with no
output.
-dan
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Tuesday, March 5, 2019 12:26 PM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Kamctl / kamcmd
In this case its ok since it’s the source
rch 5, 2019 12:20 PM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Kamctl / kamcmd
Single quotes not allow to resolve variables.
Could you test notation "${MY_VAR_NAME}" instead of "$MY_VAR_NAME"
Sergey
вт, 5 мар. 2019 г. в 20:17, Daniel W. Graham
mailto:d..
Changing double quotes to single quotes around passwords in kamctlrc fixed the
issue with kamctl.
-dan
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Tuesday, March 5, 2019 11:44 AM
To: Kamailio (SER) - Users Mailing List ;
mico...@gmail.com
Subject: Re: [SR-Users] Kamctl / kamcmd
Got
Got a little ahead of myself, not an issue with the quotes, those have to be
there obviously. Appears to be an issue with the way the password is presented
though, still digging.
-dan
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Tuesday, March 5, 2019 11:36 AM
To: mico...@gmail.com
Cc
stantin Mierla
Sent: Tuesday, March 5, 2019 10:07 AM
To: Daniel W. Graham
Cc: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Kamctl / kamcmd
Then run with -x as suggested in another response on the mailing list, maybe
you can get some hints there. Otherwise, kamctl is just using mys
pdates to kamctl
or kamdbctl related to latest mysql version, but if I am not wrong, they were
about granting access, not executing queries.
Cheers,
Daniel
On 05.03.19 05:54, Daniel W. Graham wrote:
Are there any known compatibility issues with kamctl and mysql 8.0.x?
Getting access denied when exe
Are there any known compatibility issues with kamctl and mysql 8.0.x?
Getting access denied when executing kamctl command. Kamcmd just hangs when
executed.
Kamctlrc is setup proper and connection can be made direct from shell to
database using the same credentials.
-dan
8 at 14:40, Daniel W. Graham
mailto:d...@cmsinter.net>> wrote:
My intent is to run in memory only except on one node which writes to database
for reporting use.
If this is not possible I will use an alternate for the database host.
It is possible, although you should use mode 1 or 2. Mode 3
the
same on both nodes).
I have never tried using db_mode 3 on a receiving (or any for that matter) node
- can you try with an alternative mode and let me know if you still have the
same issue? If the issue remains, please share your usrloc params for both
servers.
Charles
On Thu
, 6 Sep 2018 at 19:00, Daniel W. Graham
mailto:d...@cmsinter.net>> wrote:
v 5.1.5
modparam("dmq", "server_address", "sip:x.x.x.x:5060")
modparam("dmq", "notification_address", "sip:y.y.y.y:5060")
modparam("dmq", "multi
Correction:
if (!save("location", "0x02")) {
…..
-dan
From: sr-users On Behalf Of Daniel W.
Graham
Sent: Thursday, September 6, 2018 1:59 PM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] DMQ - Failed to
c:582]: insert_ucontact(): failed to insert in database
-dan
From: sr-users On Behalf Of Charles Chance
Sent: Thursday, September 6, 2018 6:01 AM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] DMQ - Failed to get domain
Hi Dan,
Which version are you using?
Can you share
Receiving the following message on the node receiving usr_loc via DMQ, for each
location received:
DEBUG: dmq [worker.c:87]: worker_loop(): dmq_worker [0 54958] lock acquired
DEBUG: dmq_usrloc [usrloc_sync.c:460]: usrloc_dmq_handle_msg(): dmq message
received from sip:usrloc@x.x.x.x
DEBUG:
List ; Daniel
W. Graham
Subject: Re: [SR-Users] Delay
Hello,
if it appeared without doing any upgrade to the OS, then likely a
backend/system you interact with has intervals when it doesn't respond quick
enough.
Try to check:
- a database table where you do insert or query is too big
Recently encountered a delay issue, packets arrive on system but Kamailio
doesn't process right away. Here are a few details, any direction on what I can
do to narrow down is appreciated.
The receive queue normally sits at 0 or has random spike, when this issue
occurs receive queue remains
oun...@lists.kamailio.org> On Behalf Of Daniel W.
Graham
Sent: Tuesday, March 27, 2018 12:15 PM
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Dispatcher Routing Failure
Sorry, let me clarify my last statement -
I'm seeing dispatcher:dst-down
What constitutes a 'failed request' in dispatcher module, in which a gateway is
marked inactive?
>From documentation -
ds_ping_interval
With this parameter you can define the interval for sending a request to a
gateway marked as inactive upon a failed request routing to it.
Confirmed that db_mode = 3 works as intended however db_mode = 2 results in all
records disappearing.
-dan
From: sr-users [mailto:sr-users-boun...@lists.kamailio.org] On Behalf Of Daniel
W. Graham
Sent: Wednesday, December 20, 2017 10:35 AM
To: mico...@gmail.com; Kamailio (SER) - Users Mailing
Yes they are all different.
-dan
On Dec 20, 2017, at 4:32 PM, Victor Seva
<linuxman...@torreviejawireless.org<mailto:linuxman...@torreviejawireless.org>>
wrote:
2017-12-20 17:39 GMT+01:00 Daniel W. Graham
<d...@cmsinter.net<mailto:d...@cmsinter.net>>:
Only the act
unning?
On Wednesday, December 20, 2017 10:34:42 AM EST Daniel W. Graham wrote:
> Yes, to your first question, most records originally written by the
> active server disappear. Only way to restore all records to the
> location table is taking standby servers offline and restart Kamailio
>
Database is replication is active passive.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: Daniel-Constantin Mierla [mailto:mico...@gmail.com]
Sent: Wednesday, December 20, 2017 3:48 AM
To: Kamailio (SER) - Users Mailing List <sr-us
Issue on new image was a linker config issue, (missing /usr/local/lib/). I
verified this existed on the previous image so my best guess is the original
issue was related to selinux.
-dan
From: sr-users [mailto:sr-users-boun...@lists.kamailio.org] On Behalf Of Daniel
W. Graham
Sent: Saturday
23:00 libmaxminddb.so.0.0.7
I did get the libmaxminddb.so.0 error to go away while using my previous cfg
file, I’ll dig in more later.
-dan
From: sr-users [mailto:sr-users-boun...@lists.kamailio.org] On Behalf Of Daniel
W. Graham
Sent: Saturday, December 16, 2017 2:04 AM
To: Kamailio (SER) - Users Mailin
Again, I have working fine on another host, that does have a different kernel
version / other packages.
Any ideas?
-dan
From: sr-users [mailto:sr-users-boun...@lists.kamailio.org] On Behalf Of Daniel
W. Graham
Sent: Friday, December 15, 2017 11:08 AM
To: mico...@gmail.com; Kamailio (SER) - Users
.
-dan
From: Daniel-Constantin Mierla [mailto:mico...@gmail.com]
Sent: Friday, December 15, 2017 4:19 AM
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; Daniel
W. Graham <d...@cmsinter.net>
Subject: Re: [SR-Users] 5.0 to 5.1 - No module matching found
Hello,
On 15
Upgraded two installs to 5.1.
* Same cfg file from 5.0
* No issues with install 1
Install 2 results in:
ERROR: [core/modparam.c:152]: set_mod_param_regex(): No module matching
found
CRITICAL: [core/cfg.y:3450]: yyerror_at(): parse error in config file
command I think there's no space between .py and
arg1 (or that could just be my phone).
Hth.
Sent from Samsung Mobile
-------- Original message
From: "Daniel W. Graham" <d...@cmsinter.net<mailto:d...@cmsinter.net>>
Date: 12/10/2017 1:04 PM (GMT-06:00)
To: "Kama
) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Exec - call python script with arguments
What error do you see in the logs?
On Sun, Dec 10, 2017 at 11:04 Daniel W. Graham
<d...@cmsinter.net<mailto:d...@cmsinter.net>> wrote:
Trying to call a python scr
Trying to call a python script using exec_msg and haven't had any luck.
The following works:
exec_msg("echo 'TEST' > /usr/local/etc/kamailio/test.txt");
The following works from shell:
/usr/local/etc/kamailio/script.py arg1 arg2 arg3
The following does not work from kamailio:
Thanks for the clarification!
-dan
From: Daniel-Constantin Mierla [mailto:mico...@gmail.com]
Sent: Saturday, December 9, 2017 3:13 AM
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; Daniel
W. Graham <d...@cmsinter.net>; Kamailio (SER) - Users Mailing
Looking for clarification on how the timers work, such as 'dialog_expire'.
Are these hard-set timeouts meaning if a dialog lasts longer than
'dialog_expire' there could be risk of the dialog not completing successfully?
If yes, any plans to integrate with DIALOG module to keep topos records
70 matches
Mail list logo
