Thank you dear Mojtaba for your support. The problem is resolved now. We
had a gateway between our UE and P-CSCF that was NATing UE's packets. By
deleting the NAT rules everything worked and P-CSCF sent 200 code back to
the UE. Thanks again. Regards
On Tue, Oct 11, 2022 at 2:42 PM Mojtaba wrote:
Please check it with other IMS clients such as Boghe IMS client. It
supports all type of alg mode.
cheers
On Sun, Oct 9, 2022 at 8:58 PM Ali Akbar Hemmati
wrote:
> No, I'm not sure. Is there any way to check it?
>
> On Sunday, October 9, 2022, Mojtaba wrote:
>
>> Are you sure, your client "
No, I'm not sure. Is there any way to check it?
On Sunday, October 9, 2022, Mojtaba wrote:
> Are you sure, your client " User-Agent: IM-client/OMA1.0 HW-Rto/V1.0 "
> use the AKAv1 algorithm for Authentication?
>
>
> On Sun, Oct 9, 2022 at 12:22 PM Ali Akbar Hemmati
> wrote:
>
>> Yes, the pcap
Are you sure, your client " User-Agent: IM-client/OMA1.0 HW-Rto/V1.0 " use
the AKAv1 algorithm for Authentication?
On Sun, Oct 9, 2022 at 12:22 PM Ali Akbar Hemmati
wrote:
> Yes, the pcap file is attached. The ip of the P-CSCF is 192.168.11.135.
> Also 192.168.11.60 is the ip from which UE
Hello Ali,
There are some critical points that should be checked for doing this
process, But would you please attach the pcap file of the registration
process,
Cheers
On Sat, Oct 8, 2022 at 2:24 PM Ali Akbar Hemmati
wrote:
> Hi everyone,
> I am using Kamailio as an IMS server. The UE first
Hi everyone,
I am using Kamailio as an IMS server. The UE first sends its SIP REGISTER
over TCP and gets a 401 in response. Then the UE starts sending its packets
over ESP. These ESP packets reach P-CSCF but are not delivered to its
process by the kernel. We can see ESP packets in P-CSCF using
