thanks! it worked
Kelvin Chua
On Tue, Mar 11, 2014 at 2:09 PM, Daniel-Constantin Mierla mico...@gmail.com
wrote:
Hello,
see this pv:
- http://www.kamailio.org/wiki/cookbooks/4.1.x/pseudovariables#timeval
Cheers,
Daniel
On 11/03/14 05:39, Kelvin Chua wrote:
Hi guys,
Is there a
Hello,
I'm having a problem with the command kamctl ul show, and I do not
understand what is happening. On my server when I run just kamctl ul show
command works fine but when I run kamctl ul show [username] an error
happens. Before when I was using Kamailio 3.1, its work ok. I looked for
some
Daniel,
Attached will you find the graph.
I don't really understand much of it.
My route CHANNELS is where I check if the gateway is full, if that is the
case , a go back to RELAY route , load next_gw() and then look for the
channels capacity from the new gateway .
If I received a
Hello,
What value do you have for db_mode parameter of usrloc module?
Cheers,
Daniel
Daniel-Constantin Mierla
http://www.asipto.com
On 11 Mar 2014, at 13:45, Raphael Borges raphaelsilvabor...@gmail.com wrote:
Hello,
I'm having a problem with the command kamctl ul show, and I do not
How many gateways you could possible try? More than 100?
Perhaps you can use a while loop instead of recursive subroute executions.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com
On 11 Mar 2014, at 14:01, Camila Troncoso ctronc...@redvoiss.net wrote:
Daniel,
Attached
this value so:
modparam(usrloc, db_mode, 1)
thanks
2014-03-11 10:38 GMT-03:00 Daniel-Constantin Mierla mico...@gmail.com:
Hello,
What value do you have for db_mode parameter of usrloc module?
Cheers,
Daniel
Daniel-Constantin Mierla
http://www.asipto.com
On 11 Mar 2014, at 13:45,
Daniel,
I have maximum 40 gateways to try. That's why this error is strange.
Indeed the error is presenting in calls having no more than 12 retries (
because of channel exceed or failure messages) before they could be relay
(see the attached file). So I don't understang why is the error is
Hello,
We've got an issue we've been trying to track for days with 'dialog',
where the dialogs go through the following life cycle:
1. INVITE --
2. -- 407 challenge
3. ACK --
4. INVITE --
5. -- 100 Trying
6. -- 180 Ringing
7. -- 183 Session Progress
8. -- 200 OK
9. ACK --
10. BYE --
11. --
Any recommendation web interface for gathering statistics other than SIREMIS? I
installed SIREMIS but unable to resolve login problem and my request for help
on ASIPTO didn't get any response also unable to find siremis mailing list.
Your help is greatly appreciated.
Thanks
Abdulmailk
Hello Abdulmalik,
1. There is no other web interface for Kamailio besides SIREMIS;
2. This mailing list is the right place for such enquiries; ASIPTO
provides support on a commercial basis. Assuming you do not have a
commercial support relationship with them, the community mailing list is
Thanks for responding and I will post my problem again. I did forgot to add
subject, maybe somebody will give me a hint.
Date: Tue, 11 Mar 2014 11:12:40 -0400
From: abalas...@evaristesys.com
To: sr-users@lists.sip-router.org
Subject: Re: [SR-Users] Web interface for kamailio
Hello
After it display this window
after 10 second it returning me to steps 1 or this window also if I click on
launch Siremis it goes back to step1
Thanks again.
Abdul
Date: Tue, 11 Mar 2014 11:22:27 -0400
From: abalas...@evaristesys.com
To: sr-users@lists.sip-router.org
Subject: Re:
Abdul,
Would you mind sending screenshots of the respective phases of this process?
--
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0670
Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
Daniel,
Is there a limit of times that one can invoke next_gw() function without
relaying the call? Can these be the problem?
Regards,
Camila
*De:* Camila Troncoso [mailto:ctronc...@redvoiss.net]
*Enviado el:* martes, 11 de marzo de 2014 11:05
*Para:* Daniel-Constantin Mierla
*CC:*
step 1:
Step 2
Step 3
STEP 4
Last step:
After this login widow should have redirected to login widow for example
installation documentation is available on
http://kb.asipto.com/siremis:install40x:main
Thanks
Abdul
Date: Tue, 11 Mar 2014 11:40:09 -0400
From:
Is SIREMIS returning you to page 1 of the installation process, or is it
simply returning you to the username/password login screen?
--
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0670
Web:
I configured apache web server and also installed siremis 4.1.1
successfully but i couldn't login and my problem is after welcome to
Siremis installation wizard I went through steps 1to 4 without issue. On
the last step I even receive installation complete congratulation also
display
Something I should probably add:
On 03/11/2014 10:28 AM, Alex Balashov wrote:
Hello,
We've got an issue we've been trying to track for days with 'dialog',
where the dialogs go through the following life cycle:
1. INVITE --
2. -- 407 challenge
3. ACK --
4. INVITE --
5. -- 100 Trying
6. -- 180
If you want to gather/visualize statistics, you can use the xhttp_rpc
module:
http://kamailio.org/docs/modules/devel/modules/xhttp_rpc.html
It's a simple built in web interface for all rpc commands.
Regards,
Ovidiu Sas
On Tue, Mar 11, 2014 at 11:02 AM, malik sherif asheri...@hotmail.comwrote:
We appear to have fixed this problem by calling dlg_manage() before
doing any set_dlg_profile() manipulations.
The documentation is not clear on whether dlg_manage() needs to be
called first before doing this. But it makes me wonder: if dlg_manage()
is prerequisite, then why would the profile
I do wonder if this [relatively new] setting is relevant:
http://kamailio.org/docs/modules/4.1.x/modules/dialog.html#idp1930160
We don't have it set.
Since the default value of this is '1', it makes me wonder if, in the
olden days, when one used a flag, it was inconsequential to mess with
Thanks Ovidiu, I will try it
Abdul
Date: Tue, 11 Mar 2014 13:14:56 -0400
From: o...@voipembedded.com
To: sr-users@lists.sip-router.org
Subject: Re: [SR-Users] Web interface for kamailio
If you want to gather/visualize statistics, you can use the xhttp_rpc
hello folks,
i'm really new with kamailio (a couple fo days) and I need some
suggestion/samples/idea/HELP to realize my environment. I've been starting
to read the docs on website but there are a lot and i don't know where
start and which kind of modules need to use
I''d like to realize a trunk
Hello,
I have opted for SIP SRV option. Now I have a question.
When I will set up the environment. In kamailio.cfg of both servers, I
will use the command listen = mydomainname.tk.
Now DNS with SIP SRV will have one server's ip with higher priority and
weight and other's ip as lower. So on
I have record_route and loose_route in my config ( record route , where I
handle invites loose_route within an if ( has_totag() ) )
Im not sure what im missing here, this dosnt seem to cause the contact
headers to be re-written
these contact headers do / can have the IP of the FS box ( behind
25 matches
Mail list logo
