Hi Daniel,
I'm also using letsencrypt since their beta program.
The only issue I see is that the certs expire after 90 days, which means
you will have to manually change them before those 90 days are up.
They have an automated process to get new certs and insert them in the
correct virtual hosts
Hi,
Is it possible for Kamailio to restrict certain users (like in a group) to
only receive calls but never dial out or send SIP Simple messages outbound,
while allowing all other regular users to make outgoing calls and text
messages as well as receive them?
If so, which module do you guys
Thanks Daniel.
I was looking into this option
http://nil.uniza.sk/ip-telephony/voip/kamailio-call-establishment-permission-rulesbut
your suggestion seems to be cleaner.
Cheers,
Peter
On Fri, Jun 26, 2015 at 1:40 PM, Daniel Tryba d.tr...@pocos.nl wrote:
On Friday 26 June 2015 13:26:05 Peter
Hi,
I want to experiment with the following setup and was wondering which
module(s) you all recommend.
I have a working simple kamailio 4.2 setup where registered users can only
call each other on the same domain (ie no outbound calling to PSTN or other
domains).
Now I want to explore the
-example
//Gafar
On Mon, Jan 19, 2015 at 1:25 AM, Abdul Gafar abdul.gafar@gmail.com
wrote:
Hi Peter
Please use CNXCC PrePaid module
//Gafar
On Sun, Jan 18, 2015 at 9:47 PM, Peter Villeneuve peterv...@gmail.com
wrote:
Hi,
I want to experiment with the following setup
I can confirm there are issues with siremis and newer php versions.
I have seen problems with Siremis and PHP 5.4.
In fact I reported that back in May in the sr-dev list but got no response.
http://lists.sip-router.org/pipermail/sr-dev/2014-May/024183.html
My errors were popping up with 5.5. I
To reiterate. The issues seem to only popup on PHP versions greater than
5.4.
Everything below 5.5 (like your 5.3) should work as expected.
On Thu, Dec 4, 2014 at 5:42 PM, Virmantas Variakojis
virmantas.variako...@lamoda.ru wrote:
Works fine for me with php 5.3
2014 gruod. 4 18:26 Peter
, Jul 19, 2014 at 12:40 AM, Peter Villeneuve peterv...@gmail.com
wrote:
Yup, that was it thanks.
Now I'm back to my original problem. I just have 1 tls listener on 5061.
I'm going to try and enable other transports and set the outbound proxy
and see if that fixes it.
Cheers
ERROR: tm [ut.h
Thanks Daniel.
UDP is the same story as TCP and TLS, unfortunately.
Looking through the logs, I see strange errors in parsing the contact
header when msilo prepares to send the notification back to 1000.
This is for the notification message that should have been sent back to
1000 after he sent a
,
Daniel
On 17/07/14 23:46, Peter Villeneuve wrote:
Well I've been experimenting with this for hours and still no joy
:( Hair pulling continues
Peter, I'm trying to accomplish something similar, also as a new user to
Kamailio and initially starting from the guide at
http://kb.asipto.com
:48 PM, Anthony Messina amess...@messinet.com
wrote:
On Friday, July 18, 2014 07:32:21 PM Peter Villeneuve wrote:
You are a star Anthony!
Thanks a lot for sharing your config. It is much appreciated.
I'm going to study your config in detail and see if I can get it to work
on
my install
at 11:57 PM, Anthony Messina amess...@messinet.com
wrote:
On Friday, July 18, 2014 11:34:27 PM Peter Villeneuve wrote:
Hi again,
I've been playing around with Anthony's config posted above, and I
believe
I'm almost there getting msilo to work properly, although it seems that
kamailio
in a trace and would cause a 408 after the timeout. We
are using a separate outbound enabled edge proxy so this isn’t a problem
for us.
Regards,
Hugh
*From:* sr-users-boun...@lists.sip-router.org [mailto:
sr-users-boun...@lists.sip-router.org] *On Behalf Of *Peter Villeneuve
*Sent:* 17
, 2014 at 8:58 AM, Daniel-Constantin Mierla mico...@gmail.com
wrote:
Hello,
can you watch the sip traffic on the network to see if the sip messages is
sent out? You can use ngrep, like:
ngrep -d any -qt -W byline sip port 5060
Cheers,
Daniel
On 14/07/14 19:56, Peter Villeneuve wrote:
Hi
(486|408)) {
## sethostport(192.168.2.100:5060);
## append_branch();
## # do not set the missed call flag again
## t_relay();
##}
}
On Wed, Jul 16, 2014 at 4:38 PM, Peter Villeneuve peterv...@gmail.com
wrote:
Thanks for your help Daniel.
OK I ngrepped port 5060 and indeed the message tries
Hi Miguel,
Welcome. Unfortunately I'm still fairly new to kamailio too, and the
learning curve is pretty steep as you've no doubt discovered.
I'm also having problems with getiing msilo running properly, and I'm sure
it's just bad routing on my part, so please share if you do happen to get
the
this?
Cheers,
Peter
On Mon, Jul 14, 2014 at 2:18 PM, Daniel-Constantin Mierla mico...@gmail.com
wrote:
Hello,
On 12/07/14 19:55, Peter Villeneuve wrote:
Hi,
On my server, I have the option of using either Rtpengine for NAT
traversal or pure TURN without rtpengine.
Rtpengine has the obvious
Hi,
This is most likely a stupid mistake on my route config, but msilo
correctly stores messages for offline users, but when they come back
online, the message never arrives.
Looking through the debug logs indeed there is an error, with status 408,
which suggests kamaiio can't find a route to
Hi guys,
I'm designing a new service for a client and I was wondering what your
opinion is of the 2 options I'm considering to separate users on the
server. Basically I want to create closed groups where each user can only
call and receive calls from members of the same group (single domain
Hi,
On my server, I have the option of using either Rtpengine for NAT traversal
or pure TURN without rtpengine.
Rtpengine has the obvious plus that it only needs 1 public IP, while TURN
(with STUN) will need 2 public IPs, although that's not a problem in my
case.
Having said that, I'd like to
Sorry to hijack this thread, but I was trying to follow along (Kamailio
4.1.4) and everything seems OK except that when the offline user registers
and msilo attempts to deliver his messages, I get this no corresponding
socket for af 2 error and the messages remain in the db.
I have TLS enabled in
, 2014 at 5:37 PM, Roberto Fichera ker...@tekno-soft.itwrote:
On 05/21/2014 09:08 AM, Roberto Fichera wrote:
Hi There,
On 05/20/2014 09:15 PM, Peter Villeneuve wrote:
Hi Roberto,
Hi Peter,
Did you ever figure out how to do it?
I'd be interested too.
Not yet! I tried other ways
Hi Roberto,
Did you ever figure out how to do it?
I'd be interested too.
Cheers,
Peter
On Thu, Apr 17, 2014 at 4:04 PM, Roberto Fichera ker...@tekno-soft.itwrote:
On 04/17/2014 10:36 AM, Roberto Fichera wrote:
Hi All,
On 04/16/2014 07:15 PM, Roberto Fichera wrote:
Hi All,
On
Sorry to bug you, but I never got any feedback on this, and I can't get
msilo working.
Any hints/thoughts?
Cheers
On Tue, Feb 18, 2014 at 1:02 PM, Peter Villeneuve peterv...@gmail.comwrote:
Hi Daniel,
Any thoughts on why t_on_failure(1) gives me the syntax error?
Thanks
On Mon, Feb 17
Hi Daniel,
Any thoughts on why t_on_failure(1) gives me the syntax error?
Thanks
On Mon, Feb 17, 2014 at 4:31 PM, Peter Villeneuve peterv...@gmail.comwrote:
Hi Daniel,
Thanks for replying.
This is how I added msilo to the kamailio default config. It still doesn't
work for me (ie
) should work fine with latest version, can you give the
log messages with the errors?
Cheers,
Daniel
On 16/02/14 20:41, Peter Villeneuve wrote:
Hi,
Can someone share a working msilo config for 4.1.1?
I've tried following older tutorials out there but they no longer seem to
apply
Hi,
Can someone share a working msilo config for 4.1.1?
I've tried following older tutorials out there but they no longer seem to
apply.
I just want to test out msilo with the default kamailio config in 4.1.1,
but the current example in
http://kamailio.org/docs/modules/4.1.x/modules/msilo.html
27 matches
Mail list logo
