Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi Baris,

I updated config from:

http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc

So it works(it start-up Kamilio) with kamailio 4.3, you can find it in
attachment. I didn't changed any logic, so config file should work, but I
can't guarantee. :)

With kind regards,

2016-01-29 14:39 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>:

> Hello thanks,
>
> Log file in attachment (I added as Terminal Output) so it contains
> daemon.log and syslog in the same file. You can see the terminal commands
> with relations.
>
> Regards.
>
>
>
> On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij@gmail.com> wrote:
>
> Hi Baris,
>
> Standard output means your screen where you putting your commands, like
> reboot.
>
> http://www.linfo.org/standard_output.html
>
> Kamilio writes logs, when not in debug to syslog, in your case it will be
> /var/log/syslog or /var/log/messages or anything else like Phil mentioned,
> but this is when no debug is enabled. When debug is enabled it should
> appear on your linux shell.
>
> With kind regards,
>
> Jurijs
>
> 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>
> :
>
>> Hi,
>> I checked /var/logs directory for files which has relationship with
>> Kamailio but nothing found.
>>
>> Is there anything to do in this case?
>>
>> Regards.
>>
>> On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij@gmail.com> wrote:
>>
>> div dir="ltr">
>> Hi,
>>
>> Kamilio logs should be in standard output, so basically in console, keep
>> in mind that you need to restart kamailio after updating kamailio.cfg.
>>
>> With kind regards,
>>
>> 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com
>> >:
>>
>>> Hello Jurjis,
>>> I could not reach the Freeswitch DEMO IVR with IP phones which
>>> registered at Kamailio Server. I think Kamailio can not route the
>>> Freeswitch. Because phone says "Not Found" when I dialed the "455000".
>>> And nothing to see except this at fs_cli:
>>>
>>> freeswitch@internal> console loglevel 7
>>> +OK log level 7 [7]
>>> +OK console log level set to DEBUG
>>>
>>> And I added #!define WITH_DEBUG line on Kamailio configuration file. So,
>>> where does it write logs?
>>>
>>> Regards.
>>>
>>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com> wrote:
>>>
>>> Hi Baris,
>>>
>>> On freeswitch:
>>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and
>>> next command run into it.
>>> console loglevel 7
>>>
>>> Then make a call from one extension to another and to 455000(what should
>>> be freeswitch demo IVR)
>>> Then copy all logs, put in file and send as attachment.
>>>
>>> On kamailio server somewhere on top add:
>>>
>>> #!define WITH_DEBUG
>>>
>>> Now all logs will be in console, so for same call copy logs what you get
>>> in console to separate file, attach and send too.
>>>
>>> With kind regards,
>>>
>>> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <
>>> baris.sekerci...@outlook.com>:
>>>
>>>> Hello again,
>>>> I authanticated with Kamailio and communicate with IP phones
>>>> succesfully.
>>>> But depends on this tutorial:
>>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc
>>>> When I tried to call "44102" I should go to voicemail box of user 102
>>>> but phone says "not found" and I think Kamailio could not route to
>>>> Freeswitch.
>>>>
>>>> BTW, what kind of logs do you want? Level? How can I send these are?
>>>>
>>>> Regards.
>>>>
>>>> --
>>>> From: baris.sekerci...@outlook.com
>>>> Date: Fri, 29 Jan 2016 11:37:54 +0200
>>>> To: sr-users@lists.sip-router.org
>>>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>>>>
>>>> Hello Jurjis, thanks for your answer.
>>>>
>>>> I did not try default IVR with Freeswitch. But I will try and write.
>>>>
>>>> Regards.
>>>>
>>>> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com> wrote:
>>>>
>>>> Hi Baris,
>>>>
>>>> Are you able to dial into Fre

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello again Jurijs,
I just copied the configuration file that you sent and there are some errors in 
here:
http://paste2.org/OgsW72VV 

When I tried to /etc/init.d/kamailio start there is an error came up:
root@didkamailio:/etc/kamailio# /etc/init.d/kamailio start
[] Starting kamailio (via systemctl): kamailio.serviceJob for 
kamailio.service failed. See 'systemctl status kamailio.service' and 
'journalctl -xn' for details.
 failed!

I think configuration file contains wrong things.

Regards.

> On 01 Feb 2016, at 11:42, Jurijs Ivolga  wrote:
> 
> 

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello,

Here is the message:
root@didkamailio:/etc/kamailio# systemctl status kamailio.service
● kamailio.service - LSB: Start the Kamailio SIP proxy server
   Loaded: loaded (/etc/init.d/kamailio)
   Active: failed (Result: exit-code) since Mon 2016-02-01 12:51:04 EET; 16min 
ago
  Process: 1527 ExecStop=/etc/init.d/kamailio stop (code=exited, 
status=0/SUCCESS)
  Process: 1652 ExecStart=/etc/init.d/kamailio start (code=exited, 
status=1/FAILURE)

Feb 01 12:51:04 didkamailio kamailio[1652]: 
kamailio/modules_k/:/usr/local/lib64/kamailio/modules/> 0(1661...  [sr_module.c:565]: 
load_module(): could not find...load
Feb 01 12:51:04 didkamailio kamailio[1652]: param_regex(): No module matching 
 found 0(1661) : ...(166
Feb 01 12:51:04 didkamailio kamailio[1652]: fig file 
/etc/kamailio/kamailio.cfg, line 315, column 78: Can'...6, c
Feb 01 12:51:04 didkamailio kamailio[1652]: issing loadmodule? 0(1661) ERROR: 
 [cfg.y:3295]: yyparse...61) 
Feb 01 12:51:04 didkamailio kamailio[1652]: core> [cfg.y:3432]: yyerror_at(): 
parse error in config file /...led!
Feb 01 12:51:04 didkamailio kamailio[1652]: failed!
Feb 01 12:51:04 didkamailio systemd[1]: kamailio.service: control process 
exited, code=exited status=1
Feb 01 12:51:04 didkamailio systemd[1]: Failed to start LSB: Start the Kamailio 
SIP proxy server.
Feb 01 12:51:04 didkamailio systemd[1]: Unit kamailio.service entered failed 
state.
Hint: Some lines were ellipsized, use -l to show in full.

> On 01 Feb 2016, at 13:13, Jurijs Ivolga  wrote:
> 
> systemctl status kamailio.service

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi,

Please run following command:

systemctl status kamailio.service

And send me what it shows.

With kind regards,

2016-02-01 13:11 GMT+02:00 Barış Şekerciler :

> Hello again Jurijs,
> I just copied the configuration file that you sent and there are some
> errors in here:
> http://paste2.org/OgsW72VV
>
> When I tried to /etc/init.d/kamailio start there is an error came up:
> root@didkamailio:/etc/kamailio# /etc/init.d/kamailio start
> [] Starting kamailio (via systemctl): kamailio.serviceJob for
> kamailio.service failed. See 'systemctl status kamailio.service' and
> 'journalctl -xn' for details.
>  failed!
>
> I think configuration file contains wrong things.
>
> Regards.
>
> On 01 Feb 2016, at 11:42, Jurijs Ivolga  wrote:
>
> 
>
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 
Jurijs
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi Baris,

It looks like there is issue with your modules and I think modules can't be
fond.

On this point I think you are using Debian 32 not Debian 64. In this case
you need to update following line in kamailio.cfg:

mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/"

If you are using 32 bit, then just remove 64 and it should work, if not,
please find where modules are located and update path accordingly.

With kind regards,

2016-02-01 13:26 GMT+02:00 Barış Şekerciler :

> Hello,
>
> Here is the message:
> root@didkamailio:/etc/kamailio# systemctl status kamailio.service
> ● kamailio.service - LSB: Start the Kamailio SIP proxy server
>Loaded: loaded (/etc/init.d/kamailio)
>Active: failed (Result: exit-code) since Mon 2016-02-01 12:51:04 EET;
> 16min ago
>   Process: 1527 ExecStop=/etc/init.d/kamailio stop (code=exited,
> status=0/SUCCESS)
>   Process: 1652 ExecStart=/etc/init.d/kamailio start (code=exited,
> status=1/FAILURE)
>
> Feb 01 12:51:04 didkamailio kamailio[1652]:
> kamailio/modules_k/:/usr/local/lib64/kamailio/modules/> 0(1661...  Feb 01 12:51:04 didkamailio kamailio[1652]: ERROR: 
> [sr_module.c:565]: load_module(): could not find...load
> Feb 01 12:51:04 didkamailio kamailio[1652]: param_regex(): No module
> matching  found 0(1661) : ...(166
> Feb 01 12:51:04 didkamailio kamailio[1652]: fig file
> /etc/kamailio/kamailio.cfg, line 315, column 78: Can'...6, c
> Feb 01 12:51:04 didkamailio kamailio[1652]: issing loadmodule? 0(1661)
> ERROR:  [cfg.y:3295]: yyparse...61)
> Feb 01 12:51:04 didkamailio kamailio[1652]: core> [cfg.y:3432]:
> yyerror_at(): parse error in config file /...led!
> Feb 01 12:51:04 didkamailio kamailio[1652]: failed!
> Feb 01 12:51:04 didkamailio systemd[1]: kamailio.service: control process
> exited, code=exited status=1
> Feb 01 12:51:04 didkamailio systemd[1]: Failed to start LSB: Start the
> Kamailio SIP proxy server.
> Feb 01 12:51:04 didkamailio systemd[1]: Unit kamailio.service entered
> failed state.
> Hint: Some lines were ellipsized, use -l to show in full.
>
> On 01 Feb 2016, at 13:13, Jurijs Ivolga  wrote:
>
> systemctl status kamailio.service
>
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 
Jurijs
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello,
I found modules in /usr/lib/x86_64-linux-gnu/kamailio/modules directory.
So I replaced it and restarted the server but this time when I tried to call 
102 from 101 (there are 3 accounts; 101, 102, 103) it says "forbidden" and when 
I tried to "kamctl online" nothing to show.

It could have been any mistake depends on configuration file?

Regards.

> On 01 Feb 2016, at 14:46, Jurijs Ivolga  wrote:
> 
> Hi Baris,
> 
> It looks like there is issue with your modules and I think modules can't be 
> fond.
> 
> On this point I think you are using Debian 32 not Debian 64. In this case you 
> need to update following line in kamailio.cfg:
> 
> mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/"
> 
> If you are using 32 bit, then just remove 64 and it should work, if not, 
> please find where modules are located and update path accordingly.
> 
> With kind regards,
> 
> 2016-02-01 13:26 GMT+02:00 Barış Şekerciler  >:
> Hello,
> 
> Here is the message:
> root@didkamailio:/etc/kamailio# systemctl status kamailio.service
> ● kamailio.service - LSB: Start the Kamailio SIP proxy server
>Loaded: loaded (/etc/init.d/kamailio)
>Active: failed (Result: exit-code) since Mon 2016-02-01 12:51:04 EET; 
> 16min ago
>   Process: 1527 ExecStop=/etc/init.d/kamailio stop (code=exited, 
> status=0/SUCCESS)
>   Process: 1652 ExecStart=/etc/init.d/kamailio start (code=exited, 
> status=1/FAILURE)
> 
> Feb 01 12:51:04 didkamailio kamailio[1652]: 
> kamailio/modules_k/:/usr/local/lib64/kamailio/modules/> 0(1661...  Feb 01 12:51:04 didkamailio kamailio[1652]: ERROR:  [sr_module.c:565]: 
> load_module(): could not find...load
> Feb 01 12:51:04 didkamailio kamailio[1652]: param_regex(): No module matching 
>  found 0(1661) : ...(166
> Feb 01 12:51:04 didkamailio kamailio[1652]: fig file 
> /etc/kamailio/kamailio.cfg, line 315, column 78: Can'...6, c
> Feb 01 12:51:04 didkamailio kamailio[1652]: issing loadmodule? 0(1661) ERROR: 
>  [cfg.y:3295]: yyparse...61) 
> Feb 01 12:51:04 didkamailio kamailio[1652]: core> [cfg.y:3432]: yyerror_at(): 
> parse error in config file /...led!
> Feb 01 12:51:04 didkamailio kamailio[1652]: failed!
> Feb 01 12:51:04 didkamailio systemd[1]: kamailio.service: control process 
> exited, code=exited status=1
> Feb 01 12:51:04 didkamailio systemd[1]: Failed to start LSB: Start the 
> Kamailio SIP proxy server.
> Feb 01 12:51:04 didkamailio systemd[1]: Unit kamailio.service entered failed 
> state.
> Hint: Some lines were ellipsized, use -l to show in full.
> 
>> On 01 Feb 2016, at 13:13, Jurijs Ivolga > > wrote:
>> 
>> systemctl status kamailio.service
> 
> 
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org 
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users 
> 
> 
> 
> 
> 
> -- 
> Jurijs
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Is there anyone who has an idea?

Regards.


> On 29 Jan 2016, at 14:39, Barış Şekerciler <baris.sekerci...@outlook.com> 
> wrote:
> 
> Hello thanks,
> 
> Log file in attachment (I added as Terminal Output) so it contains daemon.log 
> and syslog in the same file. You can see the terminal commands with relations.
> 
> Regards.
> 
> 
> 
>> On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij@gmail.com 
>> <mailto:jurij@gmail.com>> wrote:
>> 
>> Hi Baris,
>> 
>> Standard output means your screen where you putting your commands, like 
>> reboot. 
>> 
>> http://www.linfo.org/standard_output.html 
>> <http://www.linfo.org/standard_output.html>
>> 
>> Kamilio writes logs, when not in debug to syslog, in your case it will be 
>> /var/log/syslog or /var/log/messages or anything else like Phil mentioned, 
>> but this is when no debug is enabled. When debug is enabled it should appear 
>> on your linux shell.
>> 
>> With kind regards,
>> 
>> Jurijs
>> 
>> 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>> <mailto:baris.sekerci...@outlook.com>>:
>> Hi,
>> I checked /var/logs directory for files which has relationship with Kamailio 
>> but nothing found.
>> 
>> Is there anything to do in this case?
>> 
>> Regards.
>> 
>>> On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij@gmail.com 
>>> <mailto:jurij@gmail.com>> wrote:
>>> 
>>> div dir="ltr">
>>> Hi,
>>> 
>>> Kamilio logs should be in standard output, so basically in console, keep in 
>>> mind that you need to restart kamailio after updating kamailio.cfg.
>>> 
>>> With kind regards,
>>> 
>>> 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>>> <mailto:baris.sekerci...@outlook.com>>:
>>> Hello Jurjis,
>>> I could not reach the Freeswitch DEMO IVR with IP phones which registered 
>>> at Kamailio Server. I think Kamailio can not route the Freeswitch. Because 
>>> phone says "Not Found" when I dialed the "455000".
>>> And nothing to see except this at fs_cli:
>>> 
>>> freeswitch@internal> console loglevel 7
>>> +OK log level 7 [7]
>>> +OK console log level set to DEBUG
>>> 
>>> And I added #!define WITH_DEBUG line on Kamailio configuration file. So, 
>>> where does it write logs?
>>> 
>>> Regards.
>>> 
>>>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com 
>>>> <mailto:jurij@gmail.com>> wrote:
>>>> 
>>>> Hi Baris,
>>>> 
>>>> On freeswitch:
>>>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and 
>>>> next command run into it.
>>>> console loglevel 7
>>>> 
>>>> Then make a call from one extension to another and to 455000(what should 
>>>> be freeswitch demo IVR)
>>>> Then copy all logs, put in file and send as attachment.
>>>> 
>>>> On kamailio server somewhere on top add: 
>>>> #!define WITH_DEBUG
>>>> 
>>>> Now all logs will be in console, so for same call copy logs what you get 
>>>> in console to separate file, attach and send too.
>>>> 
>>>> With kind regards,
>>>> 
>>>> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>>>> <mailto:baris.sekerci...@outlook.com>>:
>>>> Hello again,
>>>> I authanticated with Kamailio and communicate with IP phones succesfully.
>>>> But depends on this tutorial: 
>>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
>>>> <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc>
>>>> When I tried to call "44102" I should go to voicemail box of user 102 but 
>>>> phone says "not found" and I think Kamailio could not route to Freeswitch.
>>>> 
>>>> BTW, what kind of logs do you want? Level? How can I send these are?
>>>> 
>>>> Regards.
>>>> 
>>>> From: baris.sekerci...@outlook.com <mailto:baris.sekerci...@outlook.com>
>>>> Date: Fri, 29 Jan 2016 11:37:54 +0200
>>>> To: sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
>>>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch 

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi Baris,

Your config file missing very critical parts:

Most important you are missing following line:

route(FSDISPATCH);

and lines starting with:

route[FSDISPATCH] {

and maybe something else...

I propose you to use just config from:

http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc

I believe it should work as it is.

With kind regards,

2016-01-29 16:11 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>:

> Hello Jurijs,
> Here the kamailio.cfg file:
> http://paste2.org/HZwskVbJ
>
> So I already added these lines.
>
> Regards.
>
> On 29 Jan 2016, at 16:03, Jurijs Ivolga <jurij@gmail.com> wrote:
>
> Hi Baris,
>
> Could you please send full Kamailio config file? As I see call is not
> routed to Freeswitch for some reason. Maybe you don't have following lines
> in your config:
>
> #!ifdef WITH_FREESWITCH
> freeswitch.bindip = "192.168.2.131" desc "FreeSWITCH IP Address"
> freeswitch.bindport = "5090" desc "FreeSWITCH Port"#!endif
>
>
>
>  Without full Kamailio config file, I doubt that I will be able to help
> you.
>
> With kind regards,
>
> 2016-01-29 14:43 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>
> :
>
>> Hello thanks,
>>
>> Log file in attachment (I added as Terminal Output) so it contains
>> daemon.log and syslog in the same file. You can see the terminal commands
>> with relations.
>>
>> Here is the log file content:
>> http://paste2.org/AwNINLtm
>>
>> It was too big and I could not send by mail.
>>
>> Regards.
>>
>>
>> On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij@gmail.com> wrote:
>>
>> Hi Baris,
>>
>> Standard output means your screen where you putting your commands, like
>> reboot.
>>
>> http://www.linfo.org/standard_output.html
>>
>> Kamilio writes logs, when not in debug to syslog, in your case it will be
>> /var/log/syslog or /var/log/messages or anything else like Phil mentioned,
>> but this is when no debug is enabled. When debug is enabled it should
>> appear on your linux shell.
>>
>> With kind regards,
>>
>> Jurijs
>>
>> 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com
>> >:
>>
>>> Hi,
>>> I checked /var/logs directory for files which has relationship with
>>> Kamailio but nothing found.
>>>
>>> Is there anything to do in this case?
>>>
>>> Regards.
>>>
>>> On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij@gmail.com> wrote:
>>>
>>> div dir="ltr">
>>> Hi,
>>>
>>> Kamilio logs should be in standard output, so basically in console, keep
>>> in mind that you need to restart kamailio after updating kamailio.cfg.
>>>
>>> With kind regards,
>>>
>>> 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <
>>> baris.sekerci...@outlook.com>:
>>>
>>>> Hello Jurjis,
>>>> I could not reach the Freeswitch DEMO IVR with IP phones which
>>>> registered at Kamailio Server. I think Kamailio can not route the
>>>> Freeswitch. Because phone says "Not Found" when I dialed the "455000".
>>>> And nothing to see except this at fs_cli:
>>>>
>>>> freeswitch@internal> console loglevel 7
>>>> +OK log level 7 [7]
>>>> +OK console log level set to DEBUG
>>>>
>>>> And I added #!define WITH_DEBUG line on Kamailio configuration file.
>>>> So, where does it write logs?
>>>>
>>>> Regards.
>>>>
>>>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com> wrote:
>>>>
>>>> Hi Baris,
>>>>
>>>> On freeswitch:
>>>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console
>>>> and next command run into it.
>>>> console loglevel 7
>>>>
>>>> Then make a call from one extension to another and to 455000(what
>>>> should be freeswitch demo IVR)
>>>> Then copy all logs, put in file and send as attachment.
>>>>
>>>> On kamailio server somewhere on top add:
>>>>
>>>> #!define WITH_DEBUG
>>>>
>>>> Now all logs will be in console, so for same call copy logs what you
>>>> get in console to separate file, attach and send too.
>>>>
>>>> With kind regards,
>>>>
>>>> 2016-01-29 12:40 GMT+02:00 Barı

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

guration file. So, 
>>>> where does it write logs?
>>>> 
>>>> Regards.
>>>> 
>>>>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com 
>>>>> <mailto:jurij@gmail.com>> wrote:
>>>>> 
>>>>> Hi Baris,
>>>>> 
>>>>> On freeswitch:
>>>>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and 
>>>>> next command run into it.
>>>>> console loglevel 7
>>>>> 
>>>>> Then make a call from one extension to another and to 455000(what should 
>>>>> be freeswitch demo IVR)
>>>>> Then copy all logs, put in file and send as attachment.
>>>>> 
>>>>> On kamailio server somewhere on top add: 
>>>>> #!define WITH_DEBUG
>>>>> 
>>>>> Now all logs will be in console, so for same call copy logs what you get 
>>>>> in console to separate file, attach and send too.
>>>>> 
>>>>> With kind regards,
>>>>> 
>>>>> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>>>>> <mailto:baris.sekerci...@outlook.com>>:
>>>>> Hello again,
>>>>> I authanticated with Kamailio and communicate with IP phones succesfully.
>>>>> But depends on this tutorial: 
>>>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
>>>>> <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc>
>>>>> When I tried to call "44102" I should go to voicemail box of user 102 but 
>>>>> phone says "not found" and I think Kamailio could not route to Freeswitch.
>>>>> 
>>>>> BTW, what kind of logs do you want? Level? How can I send these are?
>>>>> 
>>>>> Regards.
>>>>> 
>>>>> From: baris.sekerci...@outlook.com <mailto:baris.sekerci...@outlook.com>
>>>>> Date: Fri, 29 Jan 2016 11:37:54 +0200
>>>>> To: sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
>>>>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>>>>> 
>>>>> Hello Jurjis, thanks for your answer.
>>>>> 
>>>>> I did not try default IVR with Freeswitch. But I will try and write.
>>>>> 
>>>>> Regards.
>>>>> 
>>>>> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com 
>>>>> <mailto:jurij@gmail.com>> wrote:
>>>>> 
>>>>> Hi Baris,
>>>>> 
>>>>> Are you able to dial into Freeswitch default IVR(5000 ext)?
>>>>> 
>>>>> It will helps if you send logs from Kamailio and freeswitch.
>>>>> 
>>>>> With kind regards,
>>>>> 
>>>>> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>>>>> <mailto:baris.sekerci...@outlook.com>>:
>>>>> Thanks for answer Phill. Actually I did not apply any different 
>>>>> configuration than digetics in Kamailio Wiki. (I installed Kamailio 
>>>>> latest stable from Deb Jessie repos)
>>>>> After that, I applied these are: 
>>>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
>>>>> <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> 
>>>>> and I adapted to Kamailio 4.3 (at least I tried)
>>>>> There is nothing to different from this link.
>>>>> 
>>>>> So, I work on VmWare.
>>>>> Kamailio Server IP:   192.168.2.98
>>>>> FreeSwitch Server IP:   192.168.2.131
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> 
>>>>> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com 
>>>>> <mailto:phil.la...@synety.com>> wrote:
>>>>> 
>>>>> You'll need to share your Kamailio config and some details of your 
>>>>> network setup (specifically if NAT is involved).
>>>>> 
>>>>> 
>>>>> Phil
>>>>> 
>>>>> -Original Message-
>>>>> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org 
>>>>> <mailto:sr-users-boun...@lists.sip-router.org>] On Behalf Of Baris 
>>

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi Baris,

Could you please send full Kamailio config file? As I see call is not
routed to Freeswitch for some reason. Maybe you don't have following lines
in your config:

#!ifdef WITH_FREESWITCH
freeswitch.bindip = "192.168.2.131" desc "FreeSWITCH IP Address"
freeswitch.bindport = "5090" desc "FreeSWITCH Port"#!endif



 Without full Kamailio config file, I doubt that I will be able to help you.

With kind regards,

2016-01-29 14:43 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>:

> Hello thanks,
>
> Log file in attachment (I added as Terminal Output) so it contains
> daemon.log and syslog in the same file. You can see the terminal commands
> with relations.
>
> Here is the log file content:
> http://paste2.org/AwNINLtm
>
> It was too big and I could not send by mail.
>
> Regards.
>
>
> On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij@gmail.com> wrote:
>
> Hi Baris,
>
> Standard output means your screen where you putting your commands, like
> reboot.
>
> http://www.linfo.org/standard_output.html
>
> Kamilio writes logs, when not in debug to syslog, in your case it will be
> /var/log/syslog or /var/log/messages or anything else like Phil mentioned,
> but this is when no debug is enabled. When debug is enabled it should
> appear on your linux shell.
>
> With kind regards,
>
> Jurijs
>
> 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>
> :
>
>> Hi,
>> I checked /var/logs directory for files which has relationship with
>> Kamailio but nothing found.
>>
>> Is there anything to do in this case?
>>
>> Regards.
>>
>> On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij@gmail.com> wrote:
>>
>> div dir="ltr">
>> Hi,
>>
>> Kamilio logs should be in standard output, so basically in console, keep
>> in mind that you need to restart kamailio after updating kamailio.cfg.
>>
>> With kind regards,
>>
>> 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com
>> >:
>>
>>> Hello Jurjis,
>>> I could not reach the Freeswitch DEMO IVR with IP phones which
>>> registered at Kamailio Server. I think Kamailio can not route the
>>> Freeswitch. Because phone says "Not Found" when I dialed the "455000".
>>> And nothing to see except this at fs_cli:
>>>
>>> freeswitch@internal> console loglevel 7
>>> +OK log level 7 [7]
>>> +OK console log level set to DEBUG
>>>
>>> And I added #!define WITH_DEBUG line on Kamailio configuration file. So,
>>> where does it write logs?
>>>
>>> Regards.
>>>
>>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com> wrote:
>>>
>>> Hi Baris,
>>>
>>> On freeswitch:
>>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and
>>> next command run into it.
>>> console loglevel 7
>>>
>>> Then make a call from one extension to another and to 455000(what should
>>> be freeswitch demo IVR)
>>> Then copy all logs, put in file and send as attachment.
>>>
>>> On kamailio server somewhere on top add:
>>>
>>> #!define WITH_DEBUG
>>>
>>> Now all logs will be in console, so for same call copy logs what you get
>>> in console to separate file, attach and send too.
>>>
>>> With kind regards,
>>>
>>> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <
>>> baris.sekerci...@outlook.com>:
>>>
>>>> Hello again,
>>>> I authanticated with Kamailio and communicate with IP phones
>>>> succesfully.
>>>> But depends on this tutorial:
>>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc
>>>> When I tried to call "44102" I should go to voicemail box of user 102
>>>> but phone says "not found" and I think Kamailio could not route to
>>>> Freeswitch.
>>>>
>>>> BTW, what kind of logs do you want? Level? How can I send these are?
>>>>
>>>> Regards.
>>>>
>>>> --
>>>> From: baris.sekerci...@outlook.com
>>>> Date: Fri, 29 Jan 2016 11:37:54 +0200
>>>> To: sr-users@lists.sip-router.org
>>>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>>>>
>>>> Hello Jurjis, thanks for your answer.
>>>>
>>>> I did not try default IVR with Free

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi Baris,

On freeswitch:
/usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and
next command run into it.
console loglevel 7

Then make a call from one extension to another and to 455000(what should be
freeswitch demo IVR)
Then copy all logs, put in file and send as attachment.

On kamailio server somewhere on top add:

#!define WITH_DEBUG

Now all logs will be in console, so for same call copy logs what you get in
console to separate file, attach and send too.

With kind regards,

2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>:

> Hello again,
> I authanticated with Kamailio and communicate with IP phones succesfully.
> But depends on this tutorial:
> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc
> When I tried to call "44102" I should go to voicemail box of user 102 but
> phone says "not found" and I think Kamailio could not route to Freeswitch.
>
> BTW, what kind of logs do you want? Level? How can I send these are?
>
> Regards.
>
> --
> From: baris.sekerci...@outlook.com
> Date: Fri, 29 Jan 2016 11:37:54 +0200
> To: sr-users@lists.sip-router.org
> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>
> Hello Jurjis, thanks for your answer.
>
> I did not try default IVR with Freeswitch. But I will try and write.
>
> Regards.
>
> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com> wrote:
>
> Hi Baris,
>
> Are you able to dial into Freeswitch default IVR(5000 ext)?
>
> It will helps if you send logs from Kamailio and freeswitch.
>
> With kind regards,
>
> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>
> :
>
> Thanks for answer Phill. Actually I did not apply any different
> configuration than digetics in Kamailio Wiki. (I installed Kamailio latest
> stable from Deb Jessie repos)
> After that, I applied these are:
> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and
> I adapted to Kamailio 4.3 (at least I tried)
> There is nothing to different from this link.
>
> So, I work on VmWare.
> Kamailio Server IP:   192.168.2.98
> FreeSwitch Server IP:   192.168.2.131
>
>
>
>
>
> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com> wrote:
>
> You'll need to share your Kamailio config and some details of your network
> setup (specifically if NAT is involved).
>
>
> Phil
>
> -Original Message-----
> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org
> <sr-users-boun...@lists.sip-router.org>] On Behalf Of Baris Sekerciler
> Sent: 29 January 2016 08:35
> To: sr-users@lists.sip-router.org
> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>
> Hello everyone. I'm a student and I'm working on project which about SIP
> communication and PBXs with IP phones.
>
> So, my first test results were OK with JITSI. But I think I need
> Freeswitch for working with IP phones. In a word, I need configure an
> integration Kamailio and Freeswitch.
>
> First, I setup Debian 8.3 Jessie and installed Kamailio on this my local
> server, after that I installed another Debian 8.3 Jessie (from same image)
> as my second server and it was going to run Freeswitch on itself.
> Then I tried to send my communication requests to my Freeswitch server. I
> made some tests, my Jitsi accounts which are set in Kamailio server were
> done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio
> wiki and I applied exactly the same thing but I did not work.
> When I tried to reach another IP phone from my IP phone (I registered
> them) phone always say "NOT FOUND". I'm sure I did my configuration
> properly.
>
> So, how can I figure it out these things? How can I understand, does
> Kamailio routes to Freeswitch to my phones?
>
> Best regards.
> Thanks.
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-u

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hi,
I checked /var/logs directory for files which has relationship with Kamailio 
but nothing found.

Is there anything to do in this case?

Regards.

> On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij@gmail.com> wrote:
> 
> div dir="ltr">
> Hi,
> 
> Kamilio logs should be in standard output, so basically in console, keep in 
> mind that you need to restart kamailio after updating kamailio.cfg.
> 
> With kind regards,
> 
> 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
> <mailto:baris.sekerci...@outlook.com>>:
> Hello Jurjis,
> I could not reach the Freeswitch DEMO IVR with IP phones which registered at 
> Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone 
> says "Not Found" when I dialed the "455000".
> And nothing to see except this at fs_cli:
> 
> freeswitch@internal> console loglevel 7
> +OK log level 7 [7]
> +OK console log level set to DEBUG
> 
> And I added #!define WITH_DEBUG line on Kamailio configuration file. So, 
> where does it write logs?
> 
> Regards.
> 
>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com 
>> <mailto:jurij@gmail.com>> wrote:
>> 
>> Hi Baris,
>> 
>> On freeswitch:
>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and 
>> next command run into it.
>> console loglevel 7
>> 
>> Then make a call from one extension to another and to 455000(what should be 
>> freeswitch demo IVR)
>> Then copy all logs, put in file and send as attachment.
>> 
>> On kamailio server somewhere on top add: 
>> #!define WITH_DEBUG
>> 
>> Now all logs will be in console, so for same call copy logs what you get in 
>> console to separate file, attach and send too.
>> 
>> With kind regards,
>> 
>> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>> <mailto:baris.sekerci...@outlook.com>>:
>> Hello again,
>> I authanticated with Kamailio and communicate with IP phones succesfully.
>> But depends on this tutorial: 
>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
>> <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc>
>> When I tried to call "44102" I should go to voicemail box of user 102 but 
>> phone says "not found" and I think Kamailio could not route to Freeswitch.
>> 
>> BTW, what kind of logs do you want? Level? How can I send these are?
>> 
>> Regards.
>> 
>> From: baris.sekerci...@outlook.com <mailto:baris.sekerci...@outlook.com>
>> Date: Fri, 29 Jan 2016 11:37:54 +0200
>> To: sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>> 
>> Hello Jurjis, thanks for your answer.
>> 
>> I did not try default IVR with Freeswitch. But I will try and write.
>> 
>> Regards.
>> 
>> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com 
>> <mailto:jurij@gmail.com>> wrote:
>> 
>> Hi Baris,
>> 
>> Are you able to dial into Freeswitch default IVR(5000 ext)?
>> 
>> It will helps if you send logs from Kamailio and freeswitch.
>> 
>> With kind regards,
>> 
>> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>> <mailto:baris.sekerci...@outlook.com>>:
>> Thanks for answer Phill. Actually I did not apply any different 
>> configuration than digetics in Kamailio Wiki. (I installed Kamailio latest 
>> stable from Deb Jessie repos)
>> After that, I applied these are: 
>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
>> <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> and I 
>> adapted to Kamailio 4.3 (at least I tried)
>> There is nothing to different from this link.
>> 
>> So, I work on VmWare.
>> Kamailio Server IP:   192.168.2.98
>> FreeSwitch Server IP:   192.168.2.131
>> 
>> 
>> 
>> 
>> 
>> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com 
>> <mailto:phil.la...@synety.com>> wrote:
>> 
>> You'll need to share your Kamailio config and some details of your network 
>> setup (specifically if NAT is involved).
>> 
>> 
>> Phil
>> 
>> -Original Message-
>> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org 
>> <mailto:sr-users-boun...@lists.sip-router.org>] On Behalf Of Baris Sekerciler
>> 

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello again,I authanticated with Kamailio and communicate with IP phones 
succesfully.But depends on this tutorial: 
http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbcWhen I 
tried to call "44102" I should go to voicemail box of user 102 but phone says 
"not found" and I think Kamailio could not route to Freeswitch.
BTW, what kind of logs do you want? Level? How can I send these are?
Regards.
From: baris.sekerci...@outlook.com
Date: Fri, 29 Jan 2016 11:37:54 +0200
To: sr-users@lists.sip-router.org
Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

Hello Jurjis, thanks for your answer.
I did not try default IVR with Freeswitch. But I will try and write.
Regards.
On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com> wrote:Hi Baris,

Are you able to dial into Freeswitch default IVR(5000 ext)?

It will helps if you send logs from Kamailio and freeswitch.

With kind regards,

2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>:
Thanks for answer Phill. Actually I did not apply any different configuration 
than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb 
Jessie repos)After that, I applied these are: 
http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I 
adapted to Kamailio 4.3 (at least I tried)There is nothing to different from 
this link.
So, I work on VmWare.Kamailio Server IP:   192.168.2.98FreeSwitch Server 
IP:   192.168.2.131




On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com> wrote:
You'll need to share your Kamailio config and some details of your network 
setup (specifically if NAT is involved).


Phil

-Original Message-
From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of 
Baris Sekerciler
Sent: 29 January 2016 08:35
To: sr-users@lists.sip-router.org
Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

Hello everyone. I'm a student and I'm working on project which about SIP 
communication and PBXs with IP phones.

So, my first test results were OK with JITSI. But I think I need Freeswitch for 
working with IP phones. In a word, I need configure an integration Kamailio and 
Freeswitch.

First, I setup Debian 8.3 Jessie and installed Kamailio on this my local 
server, after that I installed another Debian 8.3 Jessie (from same image) as 
my second server and it was going to run Freeswitch on itself.
Then I tried to send my communication requests to my Freeswitch server. I made 
some tests, my Jitsi accounts which are set in Kamailio server were done. I've 
read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I 
applied exactly the same thing but I did not work.
When I tried to reach another IP phone from my IP phone (I registered them) 
phone always say "NOT FOUND". I'm sure I did my configuration properly.

So, how can I figure it out these things? How can I understand, does Kamailio 
routes to Freeswitch to my phones?

Best regards.
Thanks.
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list 
sr-users@lists.sip-router.org 
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


___

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list

sr-users@lists.sip-router.org

http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users




___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users   
  ___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello Jurjis,
I could not reach the Freeswitch DEMO IVR with IP phones which registered at 
Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone 
says "Not Found" when I dialed the "455000".
And nothing to see except this at fs_cli:

freeswitch@internal> console loglevel 7
+OK log level 7 [7]
+OK console log level set to DEBUG

And I added #!define WITH_DEBUG line on Kamailio configuration file. So, where 
does it write logs?

Regards.

> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com> wrote:
> 
> Hi Baris,
> 
> On freeswitch:
> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next 
> command run into it.
> console loglevel 7
> 
> Then make a call from one extension to another and to 455000(what should be 
> freeswitch demo IVR)
> Then copy all logs, put in file and send as attachment.
> 
> On kamailio server somewhere on top add: 
> #!define WITH_DEBUG
> 
> Now all logs will be in console, so for same call copy logs what you get in 
> console to separate file, attach and send too.
> 
> With kind regards,
> 
> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
> <mailto:baris.sekerci...@outlook.com>>:
> Hello again,
> I authanticated with Kamailio and communicate with IP phones succesfully.
> But depends on this tutorial: 
> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
> <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc>
> When I tried to call "44102" I should go to voicemail box of user 102 but 
> phone says "not found" and I think Kamailio could not route to Freeswitch.
> 
> BTW, what kind of logs do you want? Level? How can I send these are?
> 
> Regards.
> 
> From: baris.sekerci...@outlook.com <mailto:baris.sekerci...@outlook.com>
> Date: Fri, 29 Jan 2016 11:37:54 +0200
> To: sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
> 
> Hello Jurjis, thanks for your answer.
> 
> I did not try default IVR with Freeswitch. But I will try and write.
> 
> Regards.
> 
> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com 
> <mailto:jurij@gmail.com>> wrote:
> 
> Hi Baris,
> 
> Are you able to dial into Freeswitch default IVR(5000 ext)?
> 
> It will helps if you send logs from Kamailio and freeswitch.
> 
> With kind regards,
> 
> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
> <mailto:baris.sekerci...@outlook.com>>:
> Thanks for answer Phill. Actually I did not apply any different configuration 
> than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb 
> Jessie repos)
> After that, I applied these are: 
> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
> <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> and I 
> adapted to Kamailio 4.3 (at least I tried)
> There is nothing to different from this link.
> 
> So, I work on VmWare.
> Kamailio Server IP:   192.168.2.98
> FreeSwitch Server IP:   192.168.2.131
> 
> 
> 
> 
> 
> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com 
> <mailto:phil.la...@synety.com>> wrote:
> 
> You'll need to share your Kamailio config and some details of your network 
> setup (specifically if NAT is involved).
> 
> 
> Phil
> 
> -Original Message-
> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org 
> <mailto:sr-users-boun...@lists.sip-router.org>] On Behalf Of Baris Sekerciler
> Sent: 29 January 2016 08:35
> To: sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
> 
> Hello everyone. I'm a student and I'm working on project which about SIP 
> communication and PBXs with IP phones.
> 
> So, my first test results were OK with JITSI. But I think I need Freeswitch 
> for working with IP phones. In a word, I need configure an integration 
> Kamailio and Freeswitch.
> 
> First, I setup Debian 8.3 Jessie and installed Kamailio on this my local 
> server, after that I installed another Debian 8.3 Jessie (from same image) as 
> my second server and it was going to run Freeswitch on itself.
> Then I tried to send my communication requests to my Freeswitch server. I 
> made some tests, my Jitsi accounts which are set in Kamailio server were 
> done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio 
> wiki and I applied exactly the same thing but I did not work.
> When I tried to reach another IP phone fr

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi,

Kamilio logs should be in standard output, so basically in console, keep in
mind that you need to restart kamailio after updating kamailio.cfg.

With kind regards,

2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>:

> Hello Jurjis,
> I could not reach the Freeswitch DEMO IVR with IP phones which registered
> at Kamailio Server. I think Kamailio can not route the Freeswitch. Because
> phone says "Not Found" when I dialed the "455000".
> And nothing to see except this at fs_cli:
>
> freeswitch@internal> console loglevel 7
> +OK log level 7 [7]
> +OK console log level set to DEBUG
>
> And I added #!define WITH_DEBUG line on Kamailio configuration file. So,
> where does it write logs?
>
> Regards.
>
> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com> wrote:
>
> Hi Baris,
>
> On freeswitch:
> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and
> next command run into it.
> console loglevel 7
>
> Then make a call from one extension to another and to 455000(what should
> be freeswitch demo IVR)
> Then copy all logs, put in file and send as attachment.
>
> On kamailio server somewhere on top add:
>
> #!define WITH_DEBUG
>
> Now all logs will be in console, so for same call copy logs what you get
> in console to separate file, attach and send too.
>
> With kind regards,
>
> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>
> :
>
>> Hello again,
>> I authanticated with Kamailio and communicate with IP phones succesfully.
>> But depends on this tutorial:
>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc
>> When I tried to call "44102" I should go to voicemail box of user 102 but
>> phone says "not found" and I think Kamailio could not route to Freeswitch.
>>
>> BTW, what kind of logs do you want? Level? How can I send these are?
>>
>> Regards.
>>
>> --
>> From: baris.sekerci...@outlook.com
>> Date: Fri, 29 Jan 2016 11:37:54 +0200
>> To: sr-users@lists.sip-router.org
>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>>
>> Hello Jurjis, thanks for your answer.
>>
>> I did not try default IVR with Freeswitch. But I will try and write.
>>
>> Regards.
>>
>> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com> wrote:
>>
>> Hi Baris,
>>
>> Are you able to dial into Freeswitch default IVR(5000 ext)?
>>
>> It will helps if you send logs from Kamailio and freeswitch.
>>
>> With kind regards,
>>
>> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com
>> >:
>>
>> Thanks for answer Phill. Actually I did not apply any different
>> configuration than digetics in Kamailio Wiki. (I installed Kamailio latest
>> stable from Deb Jessie repos)
>> After that, I applied these are:
>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and
>> I adapted to Kamailio 4.3 (at least I tried)
>> There is nothing to different from this link.
>>
>> So, I work on VmWare.
>> Kamailio Server IP:   192.168.2.98
>> FreeSwitch Server IP:   192.168.2.131
>>
>>
>>
>>
>>
>> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com> wrote:
>>
>> You'll need to share your Kamailio config and some details of your
>> network setup (specifically if NAT is involved).
>>
>>
>> Phil
>>
>> -Original Message-
>> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org
>> <sr-users-boun...@lists.sip-router.org>] On Behalf Of Baris Sekerciler
>> Sent: 29 January 2016 08:35
>> To: sr-users@lists.sip-router.org
>> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>>
>> Hello everyone. I'm a student and I'm working on project which about SIP
>> communication and PBXs with IP phones.
>>
>> So, my first test results were OK with JITSI. But I think I need
>> Freeswitch for working with IP phones. In a word, I need configure an
>> integration Kamailio and Freeswitch.
>>
>> First, I setup Debian 8.3 Jessie and installed Kamailio on this my local
>> server, after that I installed another Debian 8.3 Jessie (from same image)
>> as my second server and it was going to run Freeswitch on itself.
>> Then I tried to send my communication requests to my Freeswitch server. I
>> made some tests, my Jitsi accounts which are set in Kamailio server w

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi Baris,

Standard output means your screen where you putting your commands, like
reboot.

http://www.linfo.org/standard_output.html

Kamilio writes logs, when not in debug to syslog, in your case it will be
/var/log/syslog or /var/log/messages or anything else like Phil mentioned,
but this is when no debug is enabled. When debug is enabled it should
appear on your linux shell.

With kind regards,

Jurijs

2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>:

> Hi,
> I checked /var/logs directory for files which has relationship with
> Kamailio but nothing found.
>
> Is there anything to do in this case?
>
> Regards.
>
> On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij@gmail.com> wrote:
>
> div dir="ltr">
> Hi,
>
> Kamilio logs should be in standard output, so basically in console, keep
> in mind that you need to restart kamailio after updating kamailio.cfg.
>
> With kind regards,
>
> 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>
> :
>
>> Hello Jurjis,
>> I could not reach the Freeswitch DEMO IVR with IP phones which registered
>> at Kamailio Server. I think Kamailio can not route the Freeswitch. Because
>> phone says "Not Found" when I dialed the "455000".
>> And nothing to see except this at fs_cli:
>>
>> freeswitch@internal> console loglevel 7
>> +OK log level 7 [7]
>> +OK console log level set to DEBUG
>>
>> And I added #!define WITH_DEBUG line on Kamailio configuration file. So,
>> where does it write logs?
>>
>> Regards.
>>
>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com> wrote:
>>
>> Hi Baris,
>>
>> On freeswitch:
>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and
>> next command run into it.
>> console loglevel 7
>>
>> Then make a call from one extension to another and to 455000(what should
>> be freeswitch demo IVR)
>> Then copy all logs, put in file and send as attachment.
>>
>> On kamailio server somewhere on top add:
>>
>> #!define WITH_DEBUG
>>
>> Now all logs will be in console, so for same call copy logs what you get
>> in console to separate file, attach and send too.
>>
>> With kind regards,
>>
>> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com
>> >:
>>
>>> Hello again,
>>> I authanticated with Kamailio and communicate with IP phones succesfully.
>>> But depends on this tutorial:
>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc
>>> When I tried to call "44102" I should go to voicemail box of user 102
>>> but phone says "not found" and I think Kamailio could not route to
>>> Freeswitch.
>>>
>>> BTW, what kind of logs do you want? Level? How can I send these are?
>>>
>>> Regards.
>>>
>>> --
>>> From: baris.sekerci...@outlook.com
>>> Date: Fri, 29 Jan 2016 11:37:54 +0200
>>> To: sr-users@lists.sip-router.org
>>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>>>
>>> Hello Jurjis, thanks for your answer.
>>>
>>> I did not try default IVR with Freeswitch. But I will try and write.
>>>
>>> Regards.
>>>
>>> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com> wrote:
>>>
>>> Hi Baris,
>>>
>>> Are you able to dial into Freeswitch default IVR(5000 ext)?
>>>
>>> It will helps if you send logs from Kamailio and freeswitch.
>>>
>>> With kind regards,
>>>
>>> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <
>>> baris.sekerci...@outlook.com>:
>>>
>>> Thanks for answer Phill. Actually I did not apply any different
>>> configuration than digetics in Kamailio Wiki. (I installed Kamailio latest
>>> stable from Deb Jessie repos)
>>> After that, I applied these are:
>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and
>>> I adapted to Kamailio 4.3 (at least I tried)
>>> There is nothing to different from this link.
>>>
>>> So, I work on VmWare.
>>> Kamailio Server IP:   192.168.2.98
>>> FreeSwitch Server IP:   192.168.2.131
>>>
>>>
>>>
>>>
>>>
>>> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com> wrote:
>>>
>>> You'll need to share your Kamailio config and some details of your
&

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello thanks,

Log file in attachment (I added as Terminal Output) so it contains daemon.log 
and syslog in the same file. You can see the terminal commands with relations.

Here is the log file content:
http://paste2.org/AwNINLtm <http://paste2.org/AwNINLtm> 

It was too big and I could not send by mail.

Regards.


> On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij@gmail.com> wrote:
> 
> Hi Baris,
> 
> Standard output means your screen where you putting your commands, like 
> reboot. 
> 
> http://www.linfo.org/standard_output.html 
> <http://www.linfo.org/standard_output.html>
> 
> Kamilio writes logs, when not in debug to syslog, in your case it will be 
> /var/log/syslog or /var/log/messages or anything else like Phil mentioned, 
> but this is when no debug is enabled. When debug is enabled it should appear 
> on your linux shell.
> 
> With kind regards,
> 
> Jurijs
> 
> 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
> <mailto:baris.sekerci...@outlook.com>>:
> Hi,
> I checked /var/logs directory for files which has relationship with Kamailio 
> but nothing found.
> 
> Is there anything to do in this case?
> 
> Regards.
> 
>> On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij@gmail.com 
>> <mailto:jurij@gmail.com>> wrote:
>> 
>> div dir="ltr">
>> Hi,
>> 
>> Kamilio logs should be in standard output, so basically in console, keep in 
>> mind that you need to restart kamailio after updating kamailio.cfg.
>> 
>> With kind regards,
>> 
>> 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>> <mailto:baris.sekerci...@outlook.com>>:
>> Hello Jurjis,
>> I could not reach the Freeswitch DEMO IVR with IP phones which registered at 
>> Kamailio Server. I think Kamailio can not route the Freeswitch. Because 
>> phone says "Not Found" when I dialed the "455000".
>> And nothing to see except this at fs_cli:
>> 
>> freeswitch@internal> console loglevel 7
>> +OK log level 7 [7]
>> +OK console log level set to DEBUG
>> 
>> And I added #!define WITH_DEBUG line on Kamailio configuration file. So, 
>> where does it write logs?
>> 
>> Regards.
>> 
>>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com 
>>> <mailto:jurij@gmail.com>> wrote:
>>> 
>>> Hi Baris,
>>> 
>>> On freeswitch:
>>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and 
>>> next command run into it.
>>> console loglevel 7
>>> 
>>> Then make a call from one extension to another and to 455000(what should be 
>>> freeswitch demo IVR)
>>> Then copy all logs, put in file and send as attachment.
>>> 
>>> On kamailio server somewhere on top add: 
>>> #!define WITH_DEBUG
>>> 
>>> Now all logs will be in console, so for same call copy logs what you get in 
>>> console to separate file, attach and send too.
>>> 
>>> With kind regards,
>>> 
>>> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>>> <mailto:baris.sekerci...@outlook.com>>:
>>> Hello again,
>>> I authanticated with Kamailio and communicate with IP phones succesfully.
>>> But depends on this tutorial: 
>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
>>> <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc>
>>> When I tried to call "44102" I should go to voicemail box of user 102 but 
>>> phone says "not found" and I think Kamailio could not route to Freeswitch.
>>> 
>>> BTW, what kind of logs do you want? Level? How can I send these are?
>>> 
>>> Regards.
>>> 
>>> From: baris.sekerci...@outlook.com <mailto:baris.sekerci...@outlook.com>
>>> Date: Fri, 29 Jan 2016 11:37:54 +0200
>>> To: sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
>>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>>> 
>>> Hello Jurjis, thanks for your answer.
>>> 
>>> I did not try default IVR with Freeswitch. But I will try and write.
>>> 
>>> Regards.
>>> 
>>> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com 
>>> <mailto:jurij@gmail.com>> wrote:
>>> 
>>> Hi Baris,
>>> 
>>> Are you able to dial into Freeswitch default IVR(5000 ext)?
>>

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Phil Lavin]

It logs to syslog. It depends how your syslog is configured to log data of the 
facility sent by Kamailio. Usually, it’ll go in /var/log/messages and/or 
/var/log/daemon.log by default


Phil

From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of 
Baris Sekerciler
Sent: 29 January 2016 12:17
To: Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

Hi,
I checked /var/logs directory for files which has relationship with Kamailio 
but nothing found.

Is there anything to do in this case?

Regards.

On 29 Jan 2016, at 13:37, Jurijs Ivolga 
<jurij@gmail.com<mailto:jurij@gmail.com>> wrote:

div dir="ltr">
Hi,
Kamilio logs should be in standard output, so basically in console, keep in 
mind that you need to restart kamailio after updating kamailio.cfg.
With kind regards,

2016-01-29 13:33 GMT+02:00 Barış Şekerciler 
<baris.sekerci...@outlook.com<mailto:baris.sekerci...@outlook.com>>:
Hello Jurjis,
I could not reach the Freeswitch DEMO IVR with IP phones which registered at 
Kamailio Server. I think Kamailio can not route the Freeswitch. Because phone 
says "Not Found" when I dialed the "455000".
And nothing to see except this at fs_cli:

freeswitch@internal> console loglevel 7
+OK log level 7 [7]
+OK console log level set to DEBUG

And I added #!define WITH_DEBUG line on Kamailio configuration file. So, where 
does it write logs?

Regards.

On 29 Jan 2016, at 12:59, Jurijs Ivolga 
<jurij@gmail.com<mailto:jurij@gmail.com>> wrote:

Hi Baris,
On freeswitch:
/usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and next 
command run into it.
console loglevel 7
Then make a call from one extension to another and to 455000(what should be 
freeswitch demo IVR)
Then copy all logs, put in file and send as attachment.
On kamailio server somewhere on top add:

#!define WITH_DEBUG
Now all logs will be in console, so for same call copy logs what you get in 
console to separate file, attach and send too.
With kind regards,

2016-01-29 12:40 GMT+02:00 Barış Şekerciler 
<baris.sekerci...@outlook.com<mailto:baris.sekerci...@outlook.com>>:
Hello again,
I authanticated with Kamailio and communicate with IP phones succesfully.
But depends on this tutorial: 
http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc
When I tried to call "44102" I should go to voicemail box of user 102 but phone 
says "not found" and I think Kamailio could not route to Freeswitch.

BTW, what kind of logs do you want? Level? How can I send these are?

Regards.


From: baris.sekerci...@outlook.com<mailto:baris.sekerci...@outlook.com>
Date: Fri, 29 Jan 2016 11:37:54 +0200
To: sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org>
Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
Hello Jurjis, thanks for your answer.

I did not try default IVR with Freeswitch. But I will try and write.

Regards.

On 29 Jan 2016, at 11:32, Jurijs Ivolga 
<jurij@gmail.com<mailto:jurij@gmail.com>> wrote:

Hi Baris,
Are you able to dial into Freeswitch default IVR(5000 ext)?
It will helps if you send logs from Kamailio and freeswitch.

With kind regards,

2016-01-29 11:14 GMT+02:00 Barış Şekerciler 
<baris.sekerci...@outlook.com<mailto:baris.sekerci...@outlook.com>>:
Thanks for answer Phill. Actually I did not apply any different configuration 
than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb 
Jessie repos)
After that, I applied these are: 
http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and I 
adapted to Kamailio 4.3 (at least I tried)
There is nothing to different from this link.

So, I work on VmWare.
Kamailio Server IP:   192.168.2.98
FreeSwitch Server IP:   192.168.2.131





On 29 Jan 2016, at 10:38, Phil Lavin 
<phil.la...@synety.com<mailto:phil.la...@synety.com>> wrote:

You'll need to share your Kamailio config and some details of your network 
setup (specifically if NAT is involved).


Phil

-Original Message-
From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of 
Baris Sekerciler
Sent: 29 January 2016 08:35
To: sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org>
Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

Hello everyone. I'm a student and I'm working on project which about SIP 
communication and PBXs with IP phones.

So, my first test results were OK with JITSI. But I think I need Freeswitch for 
working with IP phones. In a word, I need configure an integration Kamailio and 
Freeswitch.

First, I setup Debian 8.3 Jessie and installed Kamailio on this my local 
server, after that I installed another Debian 8.3 Jessie (from same image) as 
my second server and it was going 

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Phil Lavin]

You'll need to share your Kamailio config and some details of your network 
setup (specifically if NAT is involved).


Phil

-Original Message-
From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of 
Baris Sekerciler
Sent: 29 January 2016 08:35
To: sr-users@lists.sip-router.org
Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

Hello everyone. I'm a student and I'm working on project which about SIP 
communication and PBXs with IP phones.

So, my first test results were OK with JITSI. But I think I need Freeswitch for 
working with IP phones. In a word, I need configure an integration Kamailio and 
Freeswitch.

First, I setup Debian 8.3 Jessie and installed Kamailio on this my local 
server, after that I installed another Debian 8.3 Jessie (from same image) as 
my second server and it was going to run Freeswitch on itself.
Then I tried to send my communication requests to my Freeswitch server. I made 
some tests, my Jitsi accounts which are set in Kamailio server were done. I've 
read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I 
applied exactly the same thing but I did not work.
When I tried to reach another IP phone from my IP phone (I registered them) 
phone always say "NOT FOUND". I'm sure I did my configuration properly.

So, how can I figure it out these things? How can I understand, does Kamailio 
routes to Freeswitch to my phones?

Best regards.
Thanks.
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list 
sr-users@lists.sip-router.org 
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Jurijs Ivolga]

Hi Baris,

Are you able to dial into Freeswitch default IVR(5000 ext)?

It will helps if you send logs from Kamailio and freeswitch.

With kind regards,

2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>:

> Thanks for answer Phill. Actually I did not apply any different
> configuration than digetics in Kamailio Wiki. (I installed Kamailio latest
> stable from Deb Jessie repos)
> After that, I applied these are:
> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and
> I adapted to Kamailio 4.3 (at least I tried)
> There is nothing to different from this link.
>
> So, I work on VmWare.
> Kamailio Server IP:   192.168.2.98
> FreeSwitch Server IP:   192.168.2.131
>
>
>
>
>
> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com> wrote:
>
> You'll need to share your Kamailio config and some details of your network
> setup (specifically if NAT is involved).
>
>
> Phil
>
> -Original Message-
> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org
> <sr-users-boun...@lists.sip-router.org>] On Behalf Of Baris Sekerciler
> Sent: 29 January 2016 08:35
> To: sr-users@lists.sip-router.org
> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>
> Hello everyone. I'm a student and I'm working on project which about SIP
> communication and PBXs with IP phones.
>
> So, my first test results were OK with JITSI. But I think I need
> Freeswitch for working with IP phones. In a word, I need configure an
> integration Kamailio and Freeswitch.
>
> First, I setup Debian 8.3 Jessie and installed Kamailio on this my local
> server, after that I installed another Debian 8.3 Jessie (from same image)
> as my second server and it was going to run Freeswitch on itself.
> Then I tried to send my communication requests to my Freeswitch server. I
> made some tests, my Jitsi accounts which are set in Kamailio server were
> done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio
> wiki and I applied exactly the same thing but I did not work.
> When I tried to reach another IP phone from my IP phone (I registered
> them) phone always say "NOT FOUND". I'm sure I did my configuration
> properly.
>
> So, how can I figure it out these things? How can I understand, does
> Kamailio routes to Freeswitch to my phones?
>
> Best regards.
> Thanks.
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

[SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello everyone. I'm a student and I'm working on project which about SIP 
communication and PBXs with IP phones.

So, my first test results were OK with JITSI. But I think I need Freeswitch for 
working with IP phones. In a word, I need configure an integration Kamailio and 
Freeswitch.

First, I setup Debian 8.3 Jessie and installed Kamailio on this my local 
server, after that I installed another Debian 8.3 Jessie (from same image) as 
my second server and it was going to run Freeswitch on itself.
Then I tried to send my communication requests to my Freeswitch server. I made 
some tests, my Jitsi accounts which are set in Kamailio server were done. I've 
read Kamailio 3.2 and Freeswitch integration from the Kamailio wiki and I 
applied exactly the same thing but I did not work.
When I tried to reach another IP phone from my IP phone (I registered them) 
phone always say "NOT FOUND". I'm sure I did my configuration properly.

So, how can I figure it out these things? How can I understand, does Kamailio 
routes to Freeswitch to my phones?

Best regards.
Thanks.
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello Jurjis, thanks for your answer.

I did not try default IVR with Freeswitch. But I will try and write.

Regards.

> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij@gmail.com> wrote:
> 
> Hi Baris,
> 
> Are you able to dial into Freeswitch default IVR(5000 ext)?
> 
> It will helps if you send logs from Kamailio and freeswitch.
> 
> With kind regards,
> 
> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
> <mailto:baris.sekerci...@outlook.com>>:
> Thanks for answer Phill. Actually I did not apply any different configuration 
> than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb 
> Jessie repos)
> After that, I applied these are: 
> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
> <http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> and I 
> adapted to Kamailio 4.3 (at least I tried)
> There is nothing to different from this link.
> 
> So, I work on VmWare.
> Kamailio Server IP:   192.168.2.98
> FreeSwitch Server IP:   192.168.2.131
> 
> 
> 
> 
> 
>> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com 
>> <mailto:phil.la...@synety.com>> wrote:
>> 
>> You'll need to share your Kamailio config and some details of your network 
>> setup (specifically if NAT is involved).
>> 
>> 
>> Phil
>> 
>> -Original Message-
>> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org 
>> <mailto:sr-users-boun...@lists.sip-router.org>] On Behalf Of Baris Sekerciler
>> Sent: 29 January 2016 08:35
>> To: sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
>> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
>> 
>> Hello everyone. I'm a student and I'm working on project which about SIP 
>> communication and PBXs with IP phones.
>> 
>> So, my first test results were OK with JITSI. But I think I need Freeswitch 
>> for working with IP phones. In a word, I need configure an integration 
>> Kamailio and Freeswitch.
>> 
>> First, I setup Debian 8.3 Jessie and installed Kamailio on this my local 
>> server, after that I installed another Debian 8.3 Jessie (from same image) 
>> as my second server and it was going to run Freeswitch on itself.
>> Then I tried to send my communication requests to my Freeswitch server. I 
>> made some tests, my Jitsi accounts which are set in Kamailio server were 
>> done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio 
>> wiki and I applied exactly the same thing but I did not work.
>> When I tried to reach another IP phone from my IP phone (I registered them) 
>> phone always say "NOT FOUND". I'm sure I did my configuration properly.
>> 
>> So, how can I figure it out these things? How can I understand, does 
>> Kamailio routes to Freeswitch to my phones?
>> 
>> Best regards.
>> Thanks.
>> ___
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list 
>> sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> 
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users 
>> <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
>> 
>> ___
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users 
>> <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> 
> 
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users 
> <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
> 
> 
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Thanks for answer Phill. Actually I did not apply any different configuration 
than digetics in Kamailio Wiki. (I installed Kamailio latest stable from Deb 
Jessie repos)
After that, I applied these are: 
http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc 
<http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc> and I 
adapted to Kamailio 4.3 (at least I tried)
There is nothing to different from this link.

So, I work on VmWare.
Kamailio Server IP:   192.168.2.98
FreeSwitch Server IP:   192.168.2.131





> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com> wrote:
> 
> You'll need to share your Kamailio config and some details of your network 
> setup (specifically if NAT is involved).
> 
> 
> Phil
> 
> -Original Message-
> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of 
> Baris Sekerciler
> Sent: 29 January 2016 08:35
> To: sr-users@lists.sip-router.org
> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest
> 
> Hello everyone. I'm a student and I'm working on project which about SIP 
> communication and PBXs with IP phones.
> 
> So, my first test results were OK with JITSI. But I think I need Freeswitch 
> for working with IP phones. In a word, I need configure an integration 
> Kamailio and Freeswitch.
> 
> First, I setup Debian 8.3 Jessie and installed Kamailio on this my local 
> server, after that I installed another Debian 8.3 Jessie (from same image) as 
> my second server and it was going to run Freeswitch on itself.
> Then I tried to send my communication requests to my Freeswitch server. I 
> made some tests, my Jitsi accounts which are set in Kamailio server were 
> done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio 
> wiki and I applied exactly the same thing but I did not work.
> When I tried to reach another IP phone from my IP phone (I registered them) 
> phone always say "NOT FOUND". I'm sure I did my configuration properly.
> 
> So, how can I figure it out these things? How can I understand, does Kamailio 
> routes to Freeswitch to my phones?
> 
> Best regards.
> Thanks.
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list 
> sr-users@lists.sip-router.org 
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
> 
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello Jurijs,
Here the kamailio.cfg file:
http://paste2.org/HZwskVbJ <http://paste2.org/HZwskVbJ>

So I already added these lines.

Regards.

> On 29 Jan 2016, at 16:03, Jurijs Ivolga <jurij@gmail.com> wrote:
> 
> Hi Baris,
> 
> Could you please send full Kamailio config file? As I see call is not routed 
> to Freeswitch for some reason. Maybe you don't have following lines in your 
> config:
> 
> #!ifdef WITH_FREESWITCH
> freeswitch.bindip = "192.168.2.131" desc "FreeSWITCH IP Address"
> freeswitch.bindport = "5090" desc "FreeSWITCH Port"
> #!endif
> 
> 
>  Without full Kamailio config file, I doubt that I will be able to help you.
> 
> With kind regards,
> 
> 2016-01-29 14:43 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
> <mailto:baris.sekerci...@outlook.com>>:
> Hello thanks,
> 
> Log file in attachment (I added as Terminal Output) so it contains daemon.log 
> and syslog in the same file. You can see the terminal commands with relations.
> 
> Here is the log file content:
> http://paste2.org/AwNINLtm <http://paste2.org/AwNINLtm> 
> 
> It was too big and I could not send by mail.
> 
> Regards.
> 
> 
>> On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij@gmail.com 
>> <mailto:jurij@gmail.com>> wrote:
>> 
>> Hi Baris,
>> 
>> Standard output means your screen where you putting your commands, like 
>> reboot. 
>> 
>> http://www.linfo.org/standard_output.html 
>> <http://www.linfo.org/standard_output.html>
>> 
>> Kamilio writes logs, when not in debug to syslog, in your case it will be 
>> /var/log/syslog or /var/log/messages or anything else like Phil mentioned, 
>> but this is when no debug is enabled. When debug is enabled it should appear 
>> on your linux shell.
>> 
>> With kind regards,
>> 
>> Jurijs
>> 
>> 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>> <mailto:baris.sekerci...@outlook.com>>:
>> Hi,
>> I checked /var/logs directory for files which has relationship with Kamailio 
>> but nothing found.
>> 
>> Is there anything to do in this case?
>> 
>> Regards.
>> 
>>> On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij@gmail.com 
>>> <mailto:jurij@gmail.com>> wrote:
>>> 
>>> div dir="ltr">
>>> Hi,
>>> 
>>> Kamilio logs should be in standard output, so basically in console, keep in 
>>> mind that you need to restart kamailio after updating kamailio.cfg.
>>> 
>>> With kind regards,
>>> 
>>> 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>>> <mailto:baris.sekerci...@outlook.com>>:
>>> Hello Jurjis,
>>> I could not reach the Freeswitch DEMO IVR with IP phones which registered 
>>> at Kamailio Server. I think Kamailio can not route the Freeswitch. Because 
>>> phone says "Not Found" when I dialed the "455000".
>>> And nothing to see except this at fs_cli:
>>> 
>>> freeswitch@internal> console loglevel 7
>>> +OK log level 7 [7]
>>> +OK console log level set to DEBUG
>>> 
>>> And I added #!define WITH_DEBUG line on Kamailio configuration file. So, 
>>> where does it write logs?
>>> 
>>> Regards.
>>> 
>>>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij@gmail.com 
>>>> <mailto:jurij@gmail.com>> wrote:
>>>> 
>>>> Hi Baris,
>>>> 
>>>> On freeswitch:
>>>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and 
>>>> next command run into it.
>>>> console loglevel 7
>>>> 
>>>> Then make a call from one extension to another and to 455000(what should 
>>>> be freeswitch demo IVR)
>>>> Then copy all logs, put in file and send as attachment.
>>>> 
>>>> On kamailio server somewhere on top add: 
>>>> #!define WITH_DEBUG
>>>> 
>>>> Now all logs will be in console, so for same call copy logs what you get 
>>>> in console to separate file, attach and send too.
>>>> 
>>>> With kind regards,
>>>> 
>>>> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com 
>>>> <mailto:baris.sekerci...@outlook.com>>:
>>>> Hello again,
>>>> I authanticated with Kamailio and communicate with IP 

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Vasiliy Ganchev]

Hi!

To understand what is happening, you should analyse SIP exchange, use for
example:
ngrep -d any -qt -W byline "sip" port 5060

you can also use tcpdump with following studying in wireshark.

To find out what part of kamailio's configs SIP message processing passed,
add logs, and analyse syslog output, while dialling.

To get understanding how kamailio works - you have to understand how works
SIP, there is no other ways.

Cheers!



--
View this message in context: 
http://sip-router.1086192.n5.nabble.com/Kamailio-v4-3-and-Freeswitch-Stable-Latest-tp145113p145127.html
Sent from the Users mailing list archive at Nabble.com.

___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest

[Barış Şekerciler]

Hello Vasily,
Firstly I'm glad to answer me, thanks.

If you look for previous chats you can see the problem that originate from 
configuration file.
Actually, all operations are succesfull processed by Kamailio. For example text 
messaging, calling, screen sharing etc.

But problem is, Kamailio does not send calls to Freeswitch. Thanks to Jurijs I 
could figured it out something and we know problem's source depends on my 
Kamailio configuration file. Another problem is, I can't find Kamailio 4.3 
configuration file for Freeswitch. When I try to replace old configuration 
files to my 4.3 config file, throwing errors.

So, thats the problem.

Thanks for your message.

Regards.

> On 29 Jan 2016, at 12:55, Vasiliy Ganchev  wrote:
> 
> Hi!
> 
> To understand what is happening, you should analyse SIP exchange, use for
> example:
> ngrep -d any -qt -W byline "sip" port 5060
> 
> you can also use tcpdump with following studying in wireshark.
> 
> To find out what part of kamailio's configs SIP message processing passed,
> add logs, and analyse syslog output, while dialling.
> 
> To get understanding how kamailio works - you have to understand how works
> SIP, there is no other ways.
> 
> Cheers!
> 
> 
> 
> --
> View this message in context: 
> http://sip-router.1086192.n5.nabble.com/Kamailio-v4-3-and-Freeswitch-Stable-Latest-tp145113p145127.html
> Sent from the Users mailing list archive at Nabble.com.
> 
> ___
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users


___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users