This adds code to decode the configuration blocks from the OSTC. Signed-off-by: Anton Lundin <gla...@acc.umu.se> --- configuredivecomputerthreads.cpp | 250 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+)
diff --git a/configuredivecomputerthreads.cpp b/configuredivecomputerthreads.cpp
index b112bdf..e960033 100644
--- a/configuredivecomputerthreads.cpp
+++ b/configuredivecomputerthreads.cpp
@@ -479,24 +479,274 @@ void ReadSettingsThread::run()
case DC_FAMILY_HW_OSTC: {
supported = true;
unsigned char data[256] = {};
+ unsigned char max_CF = 0;
rc = hw_ostc_device_eeprom_read(m_data->device, 0,
data, sizeof(data));
if (rc == DC_STATUS_SUCCESS) {
+
m_deviceDetails->setSerialNo(QString::number(data[1] << 8 ^ data[0]));
+ m_deviceDetails->setNumberOfDives(data[3] << 8
^ data[2]);
+ //Byte5-6:
+ //Gas 1 default (%O2=21, %He=0)
+ gas gas1;
+ gas1.oxygen = data[6];
+ gas1.helium = data[7];
+ //Byte9-10:
+ //Gas 2 default (%O2=21, %He=0)
+ gas gas2;
+ gas2.oxygen = data[10];
+ gas2.helium = data[11];
+ //Byte13-14:
+ //Gas 3 default (%O2=21, %He=0)
+ gas gas3;
+ gas3.oxygen = data[14];
+ gas3.helium = data[15];
+ //Byte17-18:
+ //Gas 4 default (%O2=21, %He=0)
+ gas gas4;
+ gas4.oxygen = data[18];
+ gas4.helium = data[19];
+ //Byte21-22:
+ //Gas 5 default (%O2=21, %He=0)
+ gas gas5;
+ gas5.oxygen = data[22];
+ gas5.helium = data[23];
+ //Byte25-26:
+ //Gas 6 current (%O2, %He)
+ m_deviceDetails->setSalinity(data[26]);
+ // Active Gas Flag Register
+ gas1.type = data[27] & 0x01;
+ gas2.type = (data[27] & 0x02) >> 1;
+ gas3.type = (data[27] & 0x04) >> 2;
+ gas4.type = (data[27] & 0x08) >> 3;
+ gas5.type = (data[27] & 0x10) >> 4;
+
+ gas1.depth = data[28];
+ gas2.depth = data[29];
+ gas3.depth = data[30];
+ gas4.depth = data[31];
+ gas5.depth = data[32];
+ // 33 which gas is Fist gas
+ switch(data[33]) {
+ case 1:
+ gas1.type = 2;
+ break;
+ case 2:
+ gas2.type = 2;
+ break;
+ case 3:
+ gas3.type = 2;
+ break;
+ case 4:
+ gas4.type = 2;
+ break;
+ case 5:
+ gas5.type = 2;
+ break;
+ default:
+ //Error?
+ break;
+ }
+ // Data filled up, set the gases.
+ m_deviceDetails->setGas1(gas1);
+ m_deviceDetails->setGas2(gas2);
+ m_deviceDetails->setGas3(gas3);
+ m_deviceDetails->setGas4(gas4);
+ m_deviceDetails->setGas5(gas5);
+ m_deviceDetails->setDecoType(data[34]);
+ //Byte36:
+ //Use O2 Sensor Module in CC Modes (0= OFF, 1=
ON) (Only available in old OSTC1 - unused for OSTC Mk.2/2N)
+ //m_deviceDetails->setCcrMode(data[35]);
+ setpoint sp1;
+ sp1.sp = data[36];
+ sp1.depth = 0;
+ setpoint sp2;
+ sp2.sp = data[37];
+ sp2.depth = 0;
+ setpoint sp3;
+ sp3.sp = data[38];
+ sp3.depth = 0;
+ m_deviceDetails->setSp1(sp1);
+ m_deviceDetails->setSp2(sp2);
+ m_deviceDetails->setSp3(sp3);
+ // Byte41-42:
+ // Lowest Battery voltage seen (in mV)
+ // Byte43:
+ // Lowest Battery voltage seen at (Month)
+ // Byte44:
+ // Lowest Battery voltage seen at (Day)
+ // Byte45:
+ // Lowest Battery voltage seen at (Year)
+ // Byte46-47:
+ // Lowest Battery voltage seen at (Temperature
in 0.1 °C)
+ // Byte48:
+ // Last complete charge at (Month)
+ // Byte49:
+ // Last complete charge at (Day)
+ // Byte50:
+ // Last complete charge at (Year)
+ // Byte51-52:
+ // Total charge cycles
+ // Byte53-54:
+ // Total complete charge cycles
+ // Byte55-56:
+ // Temperature Extrema minimum (Temperature in
0.1 °C)
+ // Byte57:
+ // Temperature Extrema minimum at (Month)
+ // Byte58:
+ // Temperature Extrema minimum at (Day)
+ // Byte59:
+ // Temperature Extrema minimum at (Year)
+ // Byte60-61:
+ // Temperature Extrema maximum (Temperature in
0.1 °C)
+ // Byte62:
+ // Temperature Extrema maximum at (Month)
+ // Byte63:
+ // Temperature Extrema maximum at (Day)
+ // Byte64:
+ // Temperature Extrema maximum at (Year)
+ // Byte65:
+ // Custom Text active (=1), Custom Text
Disabled (<>1)
+ // Byte66-90:
+ // TO FIX EDITOR SYNTAX/INDENT {
+ // (25Bytes): Custom Text for Surfacemode (Real
text must end with "}")
+ // Example: OSTC Dive Computer} (19 Characters
incl. "}") Bytes 85-90 will be ignored.
+ if (data[64] == 1) {
+ // Make shure the data is
null-terminated
+ data[89] = 0;
+ // Find the internal termination and
replace it with 0
+ char *term = strchr((char *) data + 65,
(int)'}');
+ if (term)
+ *term = 0;
+ m_deviceDetails->setCustomText((const
char*) data + 65);
+ }
+ // Byte91:
+ // Dim OLED in Divemode (>0), Normal mode (=0)
+ // Byte92:
+ // Date format for all outputs:
+ // =0: MM/DD/YY
+ // =1: DD/MM/YY
+ // =2: YY/MM/DD
+ m_deviceDetails->setDateFormat(data[91]);
+ // Byte93:
+ // Total number of CF used in installed firmware
+ max_CF = data[92];
+ // Byte94:
+ // Last selected view for customview area in
surface mode
+ // Byte95:
+ // Last selected view for customview area in
dive mode
+ // Byte96-97:
+ // Diluent 1 Default (%O2,%He)
+ // Byte98-99:
+ // Diluent 1 Current (%O2,%He)
+ gas dil1 = {};
+ dil1.oxygen = data[97];
+ dil1.helium = data[98];
+ // Byte100-101:
+ // Gasuent 2 Default (%O2,%He)
+ // Byte102-103:
+ // Gasuent 2 Current (%O2,%He)
+ gas dil2 = {};
+ dil2.oxygen = data[101];
+ dil2.helium = data[102];
+ // Byte104-105:
+ // Gasuent 3 Default (%O2,%He)
+ // Byte106-107:
+ // Gasuent 3 Current (%O2,%He)
+ gas dil3 = {};
+ dil3.oxygen = data[105];
+ dil3.helium = data[106];
+ // Byte108-109:
+ // Gasuent 4 Default (%O2,%He)
+ // Byte110-111:
+ // Gasuent 4 Current (%O2,%He)
+ gas dil4 = {};
+ dil4.oxygen = data[109];
+ dil4.helium = data[110];
+ // Byte112-113:
+ // Gasuent 5 Default (%O2,%He)
+ // Byte114-115:
+ // Gasuent 5 Current (%O2,%He)
+ gas dil5 = {};
+ dil5.oxygen = data[113];
+ dil5.helium = data[114];
+ // Byte116:
+ // First Diluent (1-5)
+ switch(data[115]) {
+ case 1:
+ dil1.type = 2;
+ break;
+ case 2:
+ dil2.type = 2;
+ break;
+ case 3:
+ dil3.type = 2;
+ break;
+ case 4:
+ dil4.type = 2;
+ break;
+ case 5:
+ dil5.type = 2;
+ break;
+ default:
+ //Error?
+ break;
+ }
+ m_deviceDetails->setDil1(dil1);
+ m_deviceDetails->setDil2(dil2);
+ m_deviceDetails->setDil3(dil3);
+ m_deviceDetails->setDil4(dil4);
+ m_deviceDetails->setDil5(dil5);
+ // Byte117-128:
+ // not used/reserved
+ // Byte129-256:
+ // 32 custom Functions (CF0-CF31)
+ // The custom functions are stored in the
internal EEPROM after 0x080
+ // Any custom function occupies 4 byte:
+ // 2 byte (low:high) store the default value,
reset from menu "reset" (Will be overwritten by hard-coded defaults if reset in
the unit!)
+ // 2 byte (low:high) store the actual value
#ifdef DEBUG_OSTC
local_hw_ostc_device_eeprom_write(m_data->device, 0, data, sizeof(data));
#endif
}
rc = hw_ostc_device_eeprom_read(m_data->device, 1,
data, sizeof(data));
if (rc == DC_STATUS_SUCCESS) {
+ // Byte1:
+ // Logbook version indicator (Not writable!)
+ // Byte2-3:
+ // Last Firmware installed, 1st Byte.2nd Byte
(e.g. „1.90“) (Not writable!)
+
m_deviceDetails->setFirmwareVersion(QString::number(data[1]) + "." +
QString::number(data[2]));
+ // Byte4:
+ // OLED brightness (=0: Eco, =1 High) (Not
writable!)
+ // Byte5-11:
+ // Time/Date vault during firmware updates
+ // Byte12-128
+ // not used/reserved
+ // Byte129-256:
+ // 32 custom Functions (CF 32-63)
+ // The custom functions are stored in the
internal EEPROM after 0x180
+ // Any custom function occupies 4 byte:
+ // 2 byte (low:high) store the default value,
reset from menu "reset" (Will be overwritten by hard-coded defaults if reset in
the unit!)
+ // 2 byte (low:high) store the actual value
#ifdef DEBUG_OSTC
local_hw_ostc_device_eeprom_write(m_data->device, 1, data, sizeof(data));
#endif
}
rc = hw_ostc_device_eeprom_read(m_data->device, 2,
data, sizeof(data));
if (rc == DC_STATUS_SUCCESS) {
+ // Byte1-4:
+ // not used/reserved (Not writable!)
+ // Byte5-128:
+ // not used/reserved
+ // Byte129-256:
+ // 32 custom Functions (CF 64-95)
+ // The custom functions are stored in the
internal EEPROM after 0x280
+ // Any custom function occupies 4 byte:
+ // 2 byte (low:high) store the default value,
reset from menu "reset" (Will be overwritten by hard-coded defaults if reset in
the unit!)
+ // 2 byte (low:high) store the actual value
#ifdef DEBUG_OSTC
local_hw_ostc_device_eeprom_write(m_data->device, 2, data, sizeof(data));
#endif
}
+ emit devicedetails(m_deviceDetails);
break;
}
#endif // divecomputer 0.5.0
--
1.9.1
_______________________________________________
subsurface mailing list
subsurface@subsurface-divelog.org
http://lists.subsurface-divelog.org/cgi-bin/mailman/listinfo/subsurface
