file) but when I add the
vehicle by MATLAB I can see the parameters I set (as example battery
maximum capacity) but the vehicle does not mout the battery device so it
runs as a IMC vehicle.
Am I missing something or i cannot add a vehicle with a device through
MATLAB?
Regards
Ing. Luca D
ts and how this could be possible?
I'm using default values for SUMO vehicle class emission (EU4 gasoline
pasenger car)
Regards
[image: image.png]
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.
The formula I found in the documentation is [image: image.png] .
Of course I cannot see all the values for the *c* constant but I found
strange that, even if, a = 0, I had 0 as result.
By the way I will try use PHEM and compare result
Ing. Luca Di Costanzo
-
MsC in
utput" txt. Should I multiply those values
for 0.01?
I think I have not because comparing the results I see that through the txt
I have smaller values but I prefer asking you
Regards and happy new Year
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation
but
there deleting in *.xml* file the lookup web link everything worked
perfectly.
How can i solve this problem?
Thanks in advice
[image: Errore.PNG]
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...
ncy so it is
important that SUMO simulation works good.
In my tests the vehicle works differently near an intersection if I’m using
a time step of 1 second or 0.1 second. Moreover would you suggest to use
Euler or Ballistic Integrate model?
Regards
Ing. Luca Di Costa
ertood the position of a vehicles in SUMO is set
on the axis of the road inside a kind of mesh composed by all the roads
inside the network.
I remark that I'm talking about, not the lateral movements across lanes but
inside the one where the vehicles is moving on.
Regards
Ing. L
s figure to help you, if I was not clear, to which variable
I'm talking about
Regards
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...@gmail.com
s
ow we are using SUMo with traci4matlab, instead
of python, cause we are more experienced with it and I can assure
Regards
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...@gmail.com
calculated in the
vehicle dynamic software. So we have to change our plans
Regards
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...@gmail.com
skype: lucadicostanzo82
tel: +39 333 43 92 544
2018-04
s not able to find a find to define the capacity of my bus.
That's the way I defined the bus and my flow
Can you help me?
Regards
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...
implement it.
So my questions are:
1) can I save and load a specific state using SUMO GUI?
2) I need to operate from command line or I can set something in the
sumocfg file?
3) Should i write something specific in *.sumocfg file to load a specific
saved state?
Thanks for the help
Ing. Luca Di
I read the WIKI but unfortunately I was not able to implement it neither
from command line. And neither in the GUI I found how save a state. I know
it sounds a dumb question but can you write me the lines I have to write in
CMD or in sumocfg
Ty
Ing. Luca Di Costanzo
understood that I have to set
BEGIN=(TIME i saved before) and the guide tell me to load the saved state.
I assume I have to put it in the input files. I have to add it to NET, ROU
and ADDITIONAL file? If so what's the correct sintax for it?
Regards
Ing. Luca Di Cos
Hi guys I'm having trouble converting a OSM shapefile (downloaded from
GEOFRABRIK DB) into a SUMO network.
I don't understand if I have to use --osm-files or --shapefile-prefix as
input command. Both giving me error finding edge ID or node file.
Can you help me?
Ing. Luca D
ed 12
different osm files then I converted those into 12 different .net.xml files
and now I really need to merge those.
Is there any possibility to move on regarging the problem I wrote above?
Regards
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
B
I tried to do it once but I was not able to do that. I was sure I typed the
right commands but probably I did something wrong last time since that now
it worked properly.
Thanks and sorry, at the end, for the dumb question
Ing. Luca Di Costanzo
-
MsC in Hydraulic and
ut to model the right of way?
Regards
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...@gmail.com
skype: lucadicostanzo82
tel: +39 333 43 92 544
___
sumo
escription ...
... further intervals ...
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...@gmail.com
skype: lucadicostanzo82
tel: +39 333 43 92 544
___
ve to
turn right to go in the red circles intersection (all the connections are
settled in the proper way)
I'm posting also the definition of my vehicles:
I'm trying to working on LC parameters to solve the problem. Can you help
me?
Regards
[image: image.png]
I
ed to copy all my work the installation files.
Is someone had the same issues and can help me understande why, after more
than 1 year, I facing this problem? I installed SUMO on more than 5-7
notebook and something like that never happened.
Regards
[image: immagine.png]
Ing. Luca D
connection
there is, as target lane, the lane in the opposite direction even if they
are in a straight section of the road.
Since the number of lanes and connection it's quite huge is there any
setting that help me to remove this kind of target lane?
Regards
Ing. L
Is possible to run the command you use for a netconvert, e.g.
*--no-turnarounds, * on a *.net.xml file? Just to modify it instead of
creating a new one from zero
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact
Is there any chance to export a SUMO network in a format to use,
graphically, in QGIS? Since I created the network deleting several edges in
the original OSM I would like to import that network in qgis directly
Regards
Ing. Luca Di Costanzo
-
MsC in Hydraulic and
Hi all,
I'm having my first steps with TAZ and SUMO. I'm using sumo 1.1.0 to create
TAZ directly in NETEDIT without passing through POLYLINES.
Unfortunately I'm having troubles using the additional TAZ file. Can
someone give a look and try to understand what's wrong?
R
OD2TRIPS (using
--pedestrians) and it works but I'd like to see if it is easier use FLOW.
Thanks
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...@gmail.com
skype: lucadicostanzo82
te
Hi guys,
properly that kind of question is not directly related to an implementation
in SUMO but it's the only spot I can reach the answer.
Which is the research/paper you would suggest to cite to prove the validity
of SUMO as microscopic simulator?
Thanks in advance
Ing. Luca Di Cos
tware generates
the total number of vehicles (supposing the sum is 6.95 they generates 7
vehicle) randomly on some OD.
Is SUMO works in the same mode or not? Thanks in advance
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engine
there's a methodology he use to
generate trips even from decimal numbers but I, still, cannot understand
which is the one
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...@gmail.com
replying
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...@gmail.com
skype: lucadicostanzo82
tel: +39 333 43 92 544
Il giorno mar 7 mag 2019 alle ore 19:36 Michael Behrisch
ha scritto:
>
hing wrong happened when I uninstall 0.32 and then I installed
it again.
How is possible?
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l...@gmail.
sorry for bothering, after I lost a couple of hours understanding the error
at the end I found it. So I solve. I set wrong the enviromental variable
after I re-installed the version 0.32
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in
*.sumocfg* file
I use the following command "" to
avoid this kind of error. So how can i manage this problem? You can image
that in 5 mnutes everything, in that part of the network go crazy even if
it should not
Regards
Ing. Luca Di Costanzo
-
MsC in Hydrauli
Hi guys,
I wanna ask when I use traci.vehicle.getPosition the result is related to
which part of the vehicle? Front, Rear or Center?
Thanks
Ing. Luca Di Costanzo
-
MsC in Hydraulic and Transportation Engineering
Bsc in Civil Engineering
contact: dicostanzo.l
34 matches
Mail list logo