[freenet-support] Re: We need your help!

2005-06-08 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Matthew Toseland schrieb: As of today, we are down to ONE daily updated DBR index freesite - that being The Freedom Engine. Its author's dedication is greatly appreciated - but this is one hell of a single point of failure, and we need more than

[freenet-support] Re: Comparison of 5100 vs 5101

2005-02-01 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 5101 works very fine here, my node was offline for 3 days as I needed my bandwith. And 30 minutes after starting it up again it was back to 40 Connections, after about 3 hours it had it's normal count of 70+ connections. Btw. I suggest you update your

[freenet-support] Re: Comparison of 5100 vs 5101

2005-02-01 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Todd Walton schrieb: | You were'nt starting from a blank routing table, were you? As a matter of fact it doesn't matter wheter it is blank or not because the number of outgoing connections is mostly less than 5. My node purely lives from incoming

[freenet-support] Re: Unable to Load

2005-02-01 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Victor Denisov schrieb: | Yes, you have to forward ports if you're behind NAT, regardless of the | DMZ. All that DMZ really does is that router doesn't perform any traffic | filtering for it by default, not that it can magically understand that |

[freenet-support] Re: Unable to Load

2005-02-01 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Matthew Toseland schrieb: | That would rather mean that only 1 machine can be DMZed, right? Exactly, you can only enter one destination IP as DMZ. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.0 (MingW32)

[freenet-support] Re: Error When starting

2005-01-31 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Col.Steve Austin Ret. schrieb: | have never seen an error like this one before. | | Freenet started and ran fine last night. this morning attempted restart | after rebooting(NO setting or file changes at all) and came up with this | for (so far) three

[freenet-support] Re: Error When starting

2005-01-31 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Todd Walton schrieb: | On Mon, 31 Jan 2005 22:26:08 +0100, Someone [EMAIL PROTECTED] wrote: | |Seems like your routing table has been corrupted, this happens from time to |time. | | | In which case he should... ...search the archive for older messages

[freenet-support] Re: ANNOUNCE: DFI (Dolphin's Freenet Index) is now back online!

2005-01-14 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Toad schrieb: | Not adding hopeless index until somebody writes code to autoupdate | edition sites on the bookmarks page. ~From his last entry on edition 17 I guess that his spider will die soon, so why wasting time adding a site that won't live long?

[freenet-support] Re: ANNOUNCE: DFI (Dolphin's Freenet Index) is now back online!

2005-01-13 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Conrad J. Sabatier schrieb: | [EMAIL PROTECTED]/DFI// | | I just completed my first successful insert of DFI today since returning to | freenet just yesterday. Please try using it so that it will begin to | propagate again as quickly as possible. | |

[freenet-support] Re: ANNOUNCE: DFI (Dolphin's Freenet Index) is now back online!

2005-01-13 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Conrad J. Sabatier schrieb: | Ack! I already had one failed (automated, scheduled) insert, due to my | falling asleep and the node going off the deep end for some reason. :-) | So the site wasn't ready at the time of the DBR rollover, unfortunately.

[freenet-support] Re: FNP question

2004-12-22 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Toad schrieb: |Also I noticed that every time I export the node's reference the |signature information changes. I'd like find out more about how FNP |works and what all this identity information is. I haven't found |anything on freenethelp.org - can

[freenet-support] Re: regarding freenethelp.org slowness

2004-12-07 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Toad schrieb: | It shouldn't slow your browsing down much if correctly configured i.e. | if the output limit is appropriate for your connection and what else you | want to run on it. It may slow down your gaming and other CPU/memory heavy | tasks, but

[freenet-support] Re: What is this consequitive same winner thing?

2004-12-04 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Toad schrieb: | Could be a bug, could be severe CPU overload. I tend to say it's a bug. I get many of them since 5099, and this even on my 1,8 GHz machine. The average CPU load with freenet is around 10% on this machine with no spikes above 40%, so I

[freenet-support] Re: [Tech] Is it always this slow?/kicked out of

2004-12-01 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Phillip Hutchings schrieb: | On Wed, 1 Dec 2004 15:19:59 +0100, Newsbyte [EMAIL PROTECTED] wrote: | [cut for brevity] | | In my time watching this list, which is well over a year now, I don't | actually recall you making a valid contribution to the

[freenet-support] Re: [Tech] Is it always this slow?/kicked out of

2004-12-01 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Newsbyte schrieb: | I've made the comparison between I2P and freenet, and they both have value, | as I said in the past. I agree that the level of whining has increased, but | that's mostly due to the fact that being diplomatic and giving alternatives

[freenet-support] Re: Is it always this slow?

2004-11-30 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Clueless schrieb: | Oh, that's interesting. | Connections open (Inbound/Outbound/Limit) 89 (43/46/200) | Transfers active (Transmitting/Receiving) 41 (19/22) | | Is that good or bad? Interestingly, even that many connections use very little |

[freenet-support] Are TFE and FIND dead?

2004-11-19 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hmmm, I couldn't get TFE and FIND in the last 4 days. Most Frost groups are also much more silent than usual. Could someone else get TFE or FIND, or is there some kind of problem within the network? The interesting part is, my node does generate quite

[freenet-support] Re: ERROR(s) - FreeNet never can access the portals.

2004-11-11 Thread Someone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 bob schrieb: | I received that after I *waited* for all the retries. Ive tried every portal on | the list and nothing so far. They all give me an error that says it will retry | again. Anyone had this problem? Is there something I should change in the

[freenet-support] Re: n o open connections

2004-10-25 Thread Someone
Robert Greenage schrieb: Apparently with Java 5.0 and a a complete uninstall...including a registry purge and a fresh install it's back on track. Is there really a ver. 5098? All I got was 5096 again. Freenet doesn't write anything into the registry. Actually there is already 5099 out, look into

[freenet-support] Re: n o open connections

2004-10-24 Thread Someone
Robert Greenage schrieb: I had not used freenet for awhile . I d/l ver. 5096. I have had it up for at least 24 hrs. on three separtae days with not one connection. I saw a message about getting a real OS. I'm using win 98se. prior to this I have never had a problem. Will freenet no longer work

[freenet-support] Re: Bind external Port to another IP

2004-10-21 Thread Someone
BlueStar88 schrieb: I have some virtual IP-adresses without reverse mapping i'd like to use freenet with. You know that you can do a whois on IPs too? So if you have static IPs eighter you or your hoster is registered as owner of those IPs. In both cases it's no big deal to find out who you are.

[freenet-support] Re: Data store wiped - 11 Gb gone.

2004-10-11 Thread Someone
Niklas schrieb: Can you put them on a web server or so? I would like to see what kind of error that caused the index file corruption. /N I disabled the index some months ago, because it got corrupt whenever I killed the java process while it refreshed the index. Seems like windows doesn't give it

[freenet-support] Re: Data store wiped - 11 Gb gone.

2004-10-11 Thread Someone
[EMAIL PROTECTED] schrieb: Can you not right click on the blue bunny in the system tray and select Shutdown? -todd See my message here: http://article.gmane.org/gmane.network.freenet.devel/15673 and AFAIK shutting it down via the bunny ist the same as killing the process via the taskmanager.

[freenet-support] Re: Some infos on improving the memory footprint and routing

2004-09-27 Thread Someone
Toad schrieb: THAT is interesting. We have repeatedly been fed the dogma that the JVM can handle this perfectly well by itself... I'm quite prepared to reinstate it if this is commonly seen... Having said that, reports of OOMs are rather rare - what did you set the memory limit to? It's set to

[freenet-support] Re: Some infos on improving the memory footprint and routing

2004-09-27 Thread Someone
Toad schrieb: Of course it gets keys! It's supposed to! That's just it recording the DNFs. What matters is does it do any actual blocking? There's a couple of statistics on that... Oh, do you mean Number of Requests Blocked and Number of DNFs Ignored? If yes, they are at the following after the

[freenet-support] Re: Stable build 5093

2004-09-02 Thread Someone
Are you running freenet on Win98? Which JVM do you use? ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL

[freenet-support] Re: Stable build 5093

2004-09-02 Thread Someone
Heine Laursen schrieb: [EMAIL PROTECTED]:~$ uname -s Linux [EMAIL PROTECTED]:~$ Ok. [EMAIL PROTECTED]:~$ java -version java version 1.4.1_01 Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.1_01-b01) Java HotSpot(TM) Client VM (build 1.4.1_01-b01, mixed mode) [EMAIL PROTECTED]:~$ I have

[freenet-support] Re: Stable build 5092

2004-08-27 Thread Someone
Build 5092 looks good so far, did some small inserts and some splitfile requests and didn't get a single RNF. CPU usage seems good (except this: http://article.gmane.org/gmane.network.freenet.devel/14981 but as said there, this may be a JVM problem). Nothing bad in the error log so far.

[freenet-support] Re: reseed

2004-08-19 Thread Someone
Which build are you running, you need at least 5089 to connect to the network. If you aren't running 5091 you should really UPGRADE. ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at

[freenet-support] Re: NPE in 5090

2004-08-09 Thread Someone
Plonk schrieb: Log: Unexpected Exception in FproxyServlet.doGet -- java.lang.NullPointerException java.lang.NullPointerException Stable 5090, when trying to get a [EMAIL PROTECTED] AFAIK it's already fixed in current unstable. ___ Support mailing list

Re: [freenet-support] Question about the bunny app

2004-08-06 Thread Someone
- From: Someone [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, August 05, 2004 10:59 AM Subject: [freenet-support] Question about the bunny app Is it possible to add additional commandline parameters to the flaunch.ini that is used by the bunny app to start freenet. So I can for ex. add

[freenet-support] Question about the bunny app

2004-08-05 Thread Someone
Is it possible to add additional commandline parameters to the flaunch.ini that is used by the bunny app to start freenet. So I can for ex. add the server switch for java to it instead of starting freenet via a batch file? It's nothing important, just something that might be usefull.

[freenet-support] Re: Node not finishing start up under W2k

2004-08-05 Thread Someone
Hessi James schrieb: Hey there, I just updated to 5089. However, the node does not finish starting up. Go to: http://www.freenetproject.org/snapshots and get a new seednodes.ref If you still have trouble starting the node with it use an editor and cut the ref down in its size (this is because the

[freenet-support] What is the recommended MaxDirectMemorySize

2004-08-05 Thread Someone
What is the recommended MaxDirectMemorySize for fred with 150 connections? Don't tell me 256MB or something like this, I really don't think it must be that high. ___ Support mailing list [EMAIL PROTECTED]

[freenet-support] Re: Seednodes

2004-07-31 Thread Someone
[EMAIL PROTECTED] schrieb: I put a new permanent node online. (30GB storage for FN) But I can't really surf on freenet, not much opens. I'm getting very often this: Route Not Found messages mean that your node, or the rest of the network, didn't find the data or enough nodes to send the request

[freenet-support] Re: Seednodes

2004-07-31 Thread Someone
Toad schrieb: It's a bit perplexing. I get DNFs and RNFs; the RNFs don't seem particularly incredible... mostly. Yes, it's the same here in the first hours of runtime. But then the amount of backed off nodes reachs the number of connected nodes and stays there most of the time. Seems like the node

[freenet-support] Re: Stable build 5087

2004-07-27 Thread Someone
Klaus Brüssel schrieb: P.S. I deleted those *_a and *_b files and replaced seednodes.ref with a version that is much smaller (2 nodes) and my node starts up ! ciao --klaus Reading the big seednode files in takes a whole lot of memory. Using an 8MB seednode.ref I had an initial memory usage of

[freenet-support] Re: Why Freenet doesn't try any nodes?

2004-07-23 Thread Someone
Nick Tarleton schrieb: I've started using Freenet for the Nth time (transient - 5084 - WinXP - Sun JVM 1.4.1), and am going through the 99% RNF phase. I know this is normal, but I noticed that many of them RNF instantly and say no nodes were tried. If it's not too hard to explain, I'd like to

[freenet-support] [Fwd: Stable build 5085 - please upgrade]

2004-07-23 Thread Someone
Seems like this didn't make it here. Check the devel or technical list if you don't trust me. Original-Nachricht Betreff: Stable build 5085 - please upgrade Datum: Thu, 22 Jul 2004 18:55:40 +0100 Von: Toad [EMAIL PROTECTED] Antwort an: Discussion of development issues [EMAIL

[freenet-support] Re: How much download?

2004-07-12 Thread Someone
Joachim Scharfetter schrieb: Hi, I have got a fair use DSL account with limited download volume. How much download traffic will a permanent freenet node approximately cause? Depends on the personal use. In an idle-state (when I'm not browsing freesites or downloading splitfiles) my stable node

[freenet-support] Re: Secure NIMs?

2004-07-01 Thread Someone
Jano schrieb: Freemail is an idea I like a lot but at least my windows experience has been... lacking. The alpha 20 has been there for ages... is it still under development? Is someone using it on stable? I tried to use it on stable, but it doesn't work that good. Almost all of the times

[freenet-support] Re: RNFs

2004-06-24 Thread Someone
Toad schrieb: OUCH! Have you reseeded recently? In any case if you leave it running for a day or so it should accumulate more... a reasonable number is 100+ connections... I found that around 30 connections or normal and 60 connections is a really good number around 1 hour after restarting my

[freenet-support] Re: RNFs

2004-06-24 Thread Someone
Toad schrieb: SIX HOURS? Woah... my address gets changed at most once a month... The longest time any of the major ISPs for DSL/Dialup allow you to have an IP is 24 hours, after that you'll get disconnected, no matter what comes, and get a new IP after reconnecting. There are some smaller ISPs

[freenet-support] Re: RNFs

2004-06-24 Thread Someone
Michael R. Stork schrieb: It depends on when they do system maintenance. As long as their system is up, and you stay connected, you should keep renewing the same IP. No, it is not system maintenance here in germany. In fact it's part of the contract with the ISPs that you will get forcefully

[freenet-support] Re: RNFs

2004-06-24 Thread Someone
Troed Sångberg schrieb: I'm myself on 8/1 ADSL with a static IP, and I just got my VDSL modem in the mail so in 1-2 weeks I should be up on ~13-20Mbit both ways ... (depends on the distance to the station). Cost? ¤43/month. No traffic limits. Home servers allowed. Woa, I wish something like

[freenet-support] Re: Permanent node default

2004-06-02 Thread Someone
Jonathan Towle schrieb: I thought the primary difference between permanent and transient was that a transient node did not store data. Is this not the case any more? AFAIK: Transient did always store data. It simply didn't announce nor accept incoming requests, which meant that all stored data

[freenet-support] Re: Why?

2004-05-30 Thread Someone
Nicholas Sturm schrieb: I don't think being told where to find the jar will help me. Why? This is all that is really updated. Unless you deleted the .exe files you won't need to download them again. And if you deleted them, they are in the same server location as the jar.

[freenet-support] Re: Open Connection Disparity Between Stable And Unstable

2004-05-22 Thread Someone
[EMAIL PROTECTED] schrieb: Why does my stable node have so few connections, but my unstable node has many? When I start my stable node it begins with maybe 2 or 3 connections, but when I start my unstable node I get 20 or more connection. I'm using similar config settings between the two node

[freenet-support] Re: Open Connection Disparity Between Stable And Unstable

2004-05-22 Thread Someone
[EMAIL PROTECTED] schrieb: I thought that it didn't matter now with bidi built into stable. Does this mean that bidi is not working on the stable node like it does on the unstable node? Bidi means that both outgoing and incoming connections will be used for routing. It doesn't help against

[freenet-support] Re: Unable to download freenet

2004-05-17 Thread Someone
Nicholas Sturm schrieb: Any advise? Get the freenet-latest.jar from http://freenetproject.org/snapshots/ and replace the current freenet.jar with it. That's all when it comes to upgrading a node. ___ Support mailing list [EMAIL PROTECTED]

[freenet-support] Re: mailing list subscriber email should bypass spam blockers

2004-05-17 Thread Someone
Edward J. Huff schrieb: Nothing goes through my ISP's mail server, but since traffic on port 25 is unencrypted, they can read my mail anyway. As an alternative you could post to and read the lists via the gmane news group server, which also allows encrypted SSL connections. But as long as the

[freenet-support] Re: gateway page doesn't load anymore

2004-05-16 Thread Someone
Klaus Brüssel schrieb: Triying to load 'http://localhost:/servlet/nodeinfo/' fails. Maybe this log entry belongs to that: Should already be fixed in build 5082. Upgrade! ___ Support mailing list [EMAIL PROTECTED]

[freenet-support] Re: Transient or Permanent?

2004-05-13 Thread Someone
Perseid schrieb: I have a decent broadband connection and a decent amount of disk space to give to a node, but unfortunately I share my connection with other people so I can't leave Freenet on 24/7. I pretty much have to load it, use it, then shut it off. For this reason I've been running a

[freenet-support] Re: freenet and JRE on Win XP

2004-04-25 Thread Someone
Nicholas Sturm schrieb: If you do not have the java from Sun, you should try their latest stable build 1.3.1_02 near end of name, I believe. The latest stable Sun JRE is actually 1.4.2_04. I hardly believe that you can get freenet working with an 1.3 Sun JRE.

[freenet-support] Re: Can't connect !?

2004-04-02 Thread Someone
Matt schrieb: I have tried disabling my norton 2002 firewall, but it seems to make no difference. Exactly, you have to disable and deinstall the norton fw to stop it from fucking with your network. ___ Support mailing list [EMAIL PROTECTED]

[freenet-support] Re: 60016 - no upstream bandwidth usage??

2004-03-20 Thread Someone
Rudolf Krist schrieb: After 11 hours web interface still reported 19 bytes/second UPDATE YOUR NODE, the bug has been resolved some hours ago. ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at

[freenet-support] Re: slowdom in freeville

2004-03-11 Thread Someone
Michael Schierl schrieb: Someone [EMAIL PROTECTED] writes: sites. Maybe because of the still very slow insert performance of fiw, which still takes 36 hours to successfully insert a 4 MB freesite (fuqid inserts much faster). Any ideas why? I'd like to make FIW fast too ;) I get many

[freenet-support] Re: slowdom in freeville

2004-03-11 Thread Someone
Greets someone ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]

[freenet-support] Re: slowdom in freeville

2004-03-10 Thread Someone
of the still very slow insert performance of fiw, which still takes 36 hours to successfully insert a 4 MB freesite (fuqid inserts much faster). Greets someone ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support

[freenet-support] Re: freenet commitment settings

2004-03-09 Thread Someone
vinyl1 schrieb: {Fall2003.zip 1/ 13} Inserting 262144 bytes (try 1), HTL=25 [2004-03-08 22:15:17] {Fall2003.zip 1/ 13} Fatal error in insert thread: EFCPError: connect failed: 10061 Looks like a error in the setup of your node or fuqid, as it can't even connect to the FCP port

[freenet-support] Re: routing table

2004-02-18 Thread Someone
Victor Denisov schrieb: Wow!!! Man, how do you use computers at all with such prices for brand memory? I've just checked - retail Kingston 256 Mb PC133 module costs $38-$45 here in Russia, and we consider our computer parts market to be quite expensive compared to western one. Like I said this is

[freenet-support] Re: Compilation error

2004-02-18 Thread Someone
Yoann schrieb: I try to compile the lastest Freenet sources. I take the library freenet-ext.jar and junit.jar And when i do make, I have (I had -depecation) : javac -target 1.1 -classpath lib/freenet-ext.jar:lib/junit.jar -sourcepath src -d build -deprecation src/freenet/client/*.java

[freenet-support] Re: Compilation error

2004-02-18 Thread Someone
Yoann schrieb: If I turn off -deprecation, I have this : javac -target 1.1 -classpath lib/freenet-ext.jar:lib/junit.jar -sourcepath src -d build src/freenet/client/*.java src/freenet/client/cli/*.java Note: src/freenet/support/servlet/http/HttpSessionImpl.java uses or overrides a deprecated

[freenet-support] Re: routing table

2004-02-17 Thread Someone
Toad schrieb: Upgrade it to 256MB. Your motherboard doesn't support 256MB? That sounds unlikely if it can take a celeron 400. If you are so poor that you can't afford the $50 upgrade, well frankly, can you afford the bandwidth? Well there are Countrys where bandwidth is very cheap or free for

[freenet-support] Re: Stable 5068 Bad Seednodes, Transient/Permanent Question, etc

2004-02-11 Thread Someone
it seems that Java needs more memory when used on windows. Thanks for the help Greets someone ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo

[freenet-support] Does garbage collection really work on windows?

2004-02-11 Thread Someone
within the windows version of java? Greets someone ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:[EMAIL PROTECTED]

[freenet-support] Re: route not found

2004-02-11 Thread Someone
dave schrieb: Hello, After upgrading to 5066, I can't get anything off Freenet. It connects to some nodes after a while, but still says it can't finde a route. I have upgraded to 5068, but still no luck. It worked before 5066 and I have not changed any settings after upgrading. Whats wrong? You

[freenet-support] Re: Stable 5068 Bad Seednodes, Transient/Permanent Question, etc

2004-02-10 Thread Someone
at the moment, 1.5 is faster but a little bit wanky). Greets someone ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto

[freenet-support] Re: Stable build 5066 - stable branch network reset, merged rate limiting

2004-02-08 Thread Someone
Troed Sångberg schrieb: No one in my routing table is usig 5066 .. are they incompatible versions? Yes, you have to reseed your node. Please read toads message again ;-). ___ Support mailing list [EMAIL PROTECTED]

[freenet-support] Sun JRE 1.5.0 beta is a no go for Freenet

2004-02-05 Thread Someone
) at freenet.transport.WriteSelectorLoop.run(WriteSelectorLoop.java:747) at java.lang.Thread.run(Unknown Source) So it seems eighter fred is incompatible with the new JRE or it is due its beta state (although I never had such a Problem with the 1.4 betas before). Greets someone

[freenet-support] Re: Sun JRE 1.5.0 beta is a no go for Freenet

2004-02-05 Thread Someone
Niklas Bergh schrieb: And here is the relevant documentation from sun: Keys may be removed from, but not directly added to, the selected-key set. Any attempt to add an object to the key set will cause an UnsupportedOperationException to be thrown. Someone: you could try to remove the call

[freenet-support] Re: Sun JRE 1.5.0 beta is a no go for Freenet

2004-02-05 Thread Someone
So far it is running well. Memory and cpu usage is at an acceptable level, I can retrieve (not localy stored) YoYo pages and the error log looks normal (just the normal really late data reply and job part done errors I reported already in earlier versions). I now also used the 1.5 JDK to build it.

[freenet-support] Re: What things of Freenet eats the most memory

2004-01-19 Thread Someone
has been down for more than 1 hour. Especially since 5061 it has really gone mad. QPH was at 15 when I took the node down. -- Ed Huff Greets someone ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support

[freenet-support] What things of Freenet eats the most memory

2004-01-18 Thread Someone
QPH (they are still raising, I expect them to be beyond 10 QPH in the next 2 days) while it can only serve around 8000 QPH. Greets someone ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support

[freenet-support] Which JRE is recommended for Win2k

2004-01-16 Thread Someone
better. Greets someone ___ Support mailing list [EMAIL PROTECTED] http://news.gmane.org/gmane.network.freenet.support

[freenet-support] Re: Which JRE is recommended for Win2k

2004-01-16 Thread Someone
Herve Lefebvre schrieb: What kind of errors ? I already reported them here and mailed some log files to toad. or maybe a configuration problem. It is mainly on default configuration, I just had to reduce the max connections to 80 because of my cheap SOHO router. And with the builds previous to

[freenet-support] Re: Which JRE is recommended for Win2k

2004-01-16 Thread Someone
Niklas Bergh schrieb: Does it really include the 1.4.1 JVM or does it only include the 1.3.1 one? If it includes 1.4.1 I'd really much like to know where I can download it. Seems to be only 1.3.1 http://www-106.ibm.com/developerworks/webservices/wsdk/ /N Greets someone

[freenet-support] Re: Which JRE is recommended for Win2k

2004-01-16 Thread Someone
Herve Lefebvre schrieb: Yes, surprising. It seems that the IBM-1.4.x is not available une Windows. Well maybe there will be one in the future. But probably the SUN JVM has good performances under Windows. Last time I tried it under Linux it was _very_ slow (no JIT available). I tried some others

[freenet-support] Specialisation with stable was Re: Marked specialisation with 6441

2004-01-16 Thread Someone
In stable I can't see any specialisation. My node is running since 04/2003 with a DS size of 4GB (no DS wipe) and this is the current Histogram of keys in the DS: Histogram of keys in in fred's data store These are the keys to the data in your node's local cache (DataStore) 16.01.2004 22:53:38

[freenet-support] Re: Stable build 5060 - more routing improvements

2004-01-15 Thread Someone
Hi, I'm still getting many of these: jobPartDone(431) on [EMAIL PROTECTED] MuxConnectionHandler[conn=[tcp/connection: CLOSED,[EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED], identity=[DSA(*removed*)], sock=[Socket[addr=/*removed*,port=*removed*,localport=*removed*]],

[freenet-support] Re: Stable build 5059

2004-01-14 Thread Someone
Toad schrieb: On Thu, Jan 15, 2004 at 02:53:31AM +0100, Someone wrote: I am getting some of these: Unhandled exception java.lang.NullPointerException in job [EMAIL PROTECTED] Does it provide a stack trace? How to get one on Win2k? Would it help if I send you the log file? Handling [EMAIL

[freenet-support] Re: Stable build 5059

2004-01-14 Thread Someone
Toad schrieb: On Thu, Jan 15, 2004 at 03:04:34AM +0100, Someone wrote: How to get one on Win2k? Would it help if I send you the log file? Definitely. Ok, the log is on it's way via private eMail. I also found some of them: (freenet.support.FileBucket, Finalizer, ERROR): Delete failed on bucket

[freenet-support] Re: Stable build 5059

2004-01-14 Thread Someone
Someone schrieb: Oh well switching log level from error to normal floods the log with: (freenet.MuxTrailerReadManager, read interface thread, NORMAL): Unrecognized trailer ID: 14000 on [EMAIL PROTECTED] (DSA(*removed*),tcp/*removed*, sessions=1, presentations=3,1, ID=DSA(*removed*)): outbound