[freenet-support] why don't have freenet a connection?
Hello! I have router - firewall - PC Normally the port should be open. To be sure, I tried Kazaa. Kazaa will work. I closed kazaa and tried freenet with the same port: listenPort=1214 But at freenet work only the update function. When I start freenet, freenet is not able to connect to the Internet. Possible that I made anythin wrong at the freenet.conf ? My internal IP is 192.168.0.2 my external IP is 212.183.81.121 Can anybody take a look to my freenet.conf file? I apologize my for my stubied question. Thank you for any help Best regards Martin [Freenet node] # Freenet configuration file # Note that all properties may be overridden from the command line, # so for example, java freenet.node.Main --listenPort 1 will cause # the setting in this file to be ignored # * * * * * * * * * * * * * * * * * * * * * * * * * * * # * # * --=== READ THIS!!! READ THIS!!!READ THIS!!! =--- # * # * + VERY IMPORTANT!! + # * # * #something is a comment! # * %something is ALSO a comment! # * # * # * if you change any settings, REMOVE THE % IN THE BEGINNING OF THE LINE! # * # * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * # Lines that start with % are settings that have been unchanged from # default, and that are thus ignored by the node (so they don't linger # when we want to change the default settings). If you change these # settings you should remove the %. # This file was automatically generated by Freenet.scripts.Setup (at 28.09.2003 21:00:28) # The IP address of this node as seen by the public Internet. You only need to override this if it cannot be autodetected, for example if you have a NAT (a.k.a. IP Masquerading) firewall/router, in which case you will need to set it to the IP address or DNS name of the internet-side interface of the router, which needs to be static (www.dyndns.org and similar services can help here if you have a dynamic IP). ipAddress= 212.183.81.121 # The port to listen for incoming FNP (Freenet Node Protocol) connections on. listenPort=1214 # 24272 2926 # The port to listen for local FCP (Freenet Client Protocol) connections on. %clientPort=8481 # A comma-separated list of hosts that may connect to the FCP port # (clientPort). If left blank, only the localhost will be allowed. If you set this, make sure localhost is included in the list or access won't be allowed from the local machine. # May be given as IP addresses or host names. %fcpHosts= # If this is set then users that can provide the password can # can have administrative access. It is recommended that # you do not use this without also using adminPeer below # in which case both are required. %adminPassword=null # If this is set, then users that are authenticated owners # of the given PK identity can have administrative access. # If adminPassword is also set both are required. %adminPeer=null # Transient nodes do not give out references to themselves, and should # therefore not receive any requests. Set this to yes if you cannot # receive incoming connections, or cannot keep the computer continuously # online. transient=true # If this is true, the node will automatically announce to all nodes in # the seedFile file, as specified by announcementDelay, etc. %doAnnounce=true # A file containing one or more node references which will be incorporated # into the node's routing table on startup. A reference is only added if # there is no previously existing reference to that node. When this node # announces, it will announce to the nodes listed in this file. %seedFile=seednodes.ref # The directory in which to save diagnostics data. Defaults to # storePath/stats if left blank. %diagnosticsPath=stats # Datastore implementation. Put native (without the quotes) if you want the new native filesystem datastore, which stores the files in a directory. Put convert to convert from an old monolithic store to a native store. Note that convert uses lots of disk space while doing the conversion (approximately twice the datastore size), and the resulting store may be (temporarily) slightly larger than the old one due to block size mismatch (this will be fixed as soon as the node tries to add a file to the store). %storeType=freenet # The path to the file containing the node's private key, DSA group, # cipher key, etc. Defaults to node in the current directory. %nodeFile= # The path to the single directory containing the data store. The total maximum size of the files in the directory is given by storeSize. It will create new files and directories in this dir, and DELETE OLD ONES. Defaults to store in the current directory. %storeFile= # The byte size of the data store directory. # The maximum sized file that will be cached is 1/100th of # this value. We recommend the default 256MB, to cache the largest common # file size on freenet, 1MB plus some headers, with plenty of elbowroom, but
Re: [freenet-support] why don't have freenet a connection?
No worries, I've seen stubbier questions. Your .ini looks fine to me - how do you know Freenet cannot connect to the internet? When I start freenet, freenet is not able to connect to the Internet. What exactly do you mean by that? How do you know freenet is not able to connect to the Internet? How many inbound connections are you getting? How many outbound connections are you getting? What does the web interface page show? Are there any error messages in the log? (right click the rabbit to view the log file, or just open up freenet.log ). d ___ Support mailing list [EMAIL PROTECTED] http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] why don't have freenet a connection?
There are times when Zone Alarm shows no input or output, when the little blue rabbit says freenet is running and when the log file shows at least the last ten words or so of this message line: Nov 3, 2003 7:01:00 PM (freenet.node.states.announcing.Announcing, QThread-20239, NORMAL): Found 3 announcement targets for this node. Nov 3, 2003 7:01:00 PM (freenet.node.states.announcing.Announcing, QThread-20243, NORMAL): Announcement failed to 5379 30f4 1470 2bd2 a5aa 30fe b80b 2ade 52c6 a9dd at depth 2:freenet.SendFailedException: Against peer DSA(5379 30f4 1470 2bd2 a5aa 30fe b80b 2ade 52c6 a9dd) @ null - No open connections and can't contact node (terminal) Nov 3, 2003 7:01:00 PM (freenet.node.states.announcing.Announcing, QThread-20243, NORMAL): Announcement failed to cb9b bc3c a736 dbad 8c60 f5fe 51b0 e9b6 0576 4b42 at depth 2:freenet.SendFailedException: Against peer DSA(cb9b bc3c a736 dbad 8c60 f5fe 51b0 e9b6 0576 4b42) @ null - No open connections and can't contact node (terminal) Nov 3, 2003 7:01:00 PM (freenet.node.states.announcing.Announcing, QThread-20243, NORMAL): Announcement failed to beac 3174 0d68 33e9 6dba 6ff7 22a7 7051 18dc e97c at depth 2:freenet.SendFailedException: Against peer DSA(beac 3174 0d68 33e9 6dba 6ff7 22a7 7051 18dc e97c) @ null - No open connections and can't contact node (terminal) Nov 3, 2003 7:01:35 PM (freenet.node.Main$InsertARK, QThread-20239, NORMAL): RouteNotFound Inserting ARK Nov 3, 2003 7:02:12 PM (freenet.node.Main$InsertARK, QThread-20239, NORMAL): RouteNotFound Inserting ARK Nov 3, 2003 7:05:27 PM (freenet.diagnostics.StandardDiagnostics, QThread-20216, NORMAL): Aggregation of stats past the next minute. This isn't great, but should not be a problem unless it happens all the time. Reached time: Mon Nov 03 19:01:00 EST 2003 Nov 3, 2003 7:16:00 PM (freenet.node.states.announcing.Announcing, QThread-20263, NORMAL): Found 3 announcement targets for this node. Nov 3, 2003 7:16:00 PM (freenet.node.states.announcing.Announcing, QThread-20249, NORMAL): Announcement failed to e16e 5a0f cd07 5228 f69a 7215 be6d ddb0 c951 d7e3 at depth 2:freenet.SendFailedException: Against peer DSA(e16e 5a0f cd07 5228 f69a 7215 be6d ddb0 c951 d7e3) @ null - No open connections and can't contact node (terminal) Nov 3, 2003 7:16:00 PM (freenet.node.states.announcing.Announcing, QThread-20264, NORMAL): Announcement failed to 2b26 cecc 6ef0 35d3 22db 150d 01cf 3448 e82f 55d5 at depth 2:freenet.SendFailedException: Against peer DSA(2b26 cecc 6ef0 35d3 22db 150d 01cf 3448 e82f 55d5) @ null - No open connections and can't contact node (terminal) Nov 3, 2003 7:16:00 PM (freenet.node.states.announcing.Announcing, QThread-20263, NORMAL): Announcement failed to 7b26 0f52 2ad7 e5b6 9ebc ff02 11b1 30b4 b6b4 d6ce at depth 2:freenet.SendFailedException: Against peer DSA(7b26 0f52 2ad7 e5b6 9ebc ff02 11b1 30b4 b6b4 d6ce) @ null - No open connections and can't contact node (terminal) i.e., No open connections and can't contact node (terminal), but when CPU is registering 100% usage. Trying to get an interface response is usually impossible at these times. If I go to the freenet.log file and examine it there will frequently have been no new entries for many minutes (say 10 to 30), but many lines showing that last quote at end of many long lines, and debugs separating them. It appears that freenet is running unattached to anything useful although it will sometimes backoff of 100%, but the rabbit usually them disappears and CPU usage will return to 100%. Am I correct to assume that Freenet is not doing anything useful and a restart would be desirable? That does not always work and I've gotten messages to the effect that more than one node is running. A operating system restart will usually clear the problem, but I dont' know if continuing then is of any value. [Original Message] From: Dave Hooper [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 11/3/2003 3:42:05 PM Subject: Re: [freenet-support] why don't have freenet a connection? No worries, I've seen stubbier questions. Your .ini looks fine to me - how do you know Freenet cannot connect to the internet? When I start freenet, freenet is not able to connect to the Internet. What exactly do you mean by that? How do you know freenet is not able to connect to the Internet? How many inbound connections are you getting? How many outbound connections are you getting? What does the web interface page show? Are there any error messages in the log? (right click the rabbit to view the log file, or just open up freenet.log ). d ___ Support mailing list [EMAIL PROTECTED] http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support ___ Support mailing list [EMAIL PROTECTED] http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Re: [freenet-support] why don't have freenet a connection?
# The IP address of this node as seen by the public Internet. You only need to override this if it cannot be autodetected, for example if you have a NAT (a.k.a. IP Masquerading) firewall/router, in which case you will need to set it to the IP address or DNS name of the internet-side interface of the router, which needs to be static (www.dyndns.org and similar services can help here if you have a dynamic IP). ipAddress= 212.183.81.121 Try removing the space. -- Matthew J Toseland - [EMAIL PROTECTED] Freenet Project Official Codemonkey - http://freenetproject.org/ ICTHUS - Nothing is impossible. Our Boss says so. signature.asc Description: Digital signature ___ Support mailing list [EMAIL PROTECTED] http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
