Re: [freenet-support] Moving freenet to another partition

2016-04-29 Thread xor 
On Tuesday, September 08, 2015 03:55:25 PM Ivo Vegter wrote:
> To move freenet from /opt to /home, I followed the instructions here:
> https://wiki.freenetproject.org/Moving_an_Installation
> i.e. I changed all occurrences of /opt in freenet.ini to /home.
> 
> I use systemd, and updated the freenet.service file to reflect the new
> location. For good measure, I changed the freenet user's home directory
> from /opt/freenet to /home/freenet, too.
> 
> Systemd was unable to start freenet, however. The log says only that the
> main process exited with status 1 and the systemd unit consequently failed
> with result 'exit-code'. (Exact log below.)
> 
> I found more references to /opt in run.sh and wrapper.config, which
> suggests the above wiki page is incomplete, at best. I changed those
> occurrences too, but no luck.
> 
> Pls halp.
> ​
> ​Ivo​
> 
> ​LOG (note last 4 lines in particular):
> 
> Sep 08 15:19:27 myhost.mydomain sudo[26977]:myuser : TTY=pts/0 ;
> PWD=/home/freenet ; USER=root ; COMMAND=/usr/bin/systemctl start freenet
> Sep 08 15:19:27 myhost.mydomain sudo[26977]: pam_unix(sudo:session):
> session opened for user root by myuser(uid=0)
> Sep 08 15:19:27 myhost.mydomain systemd[1]: Starting Freenet...
> -- Subject: Unit freenet.service has begun start-up
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit freenet.service has begun starting up.
> Sep 08 15:19:27 myhost.mydomain polkitd[553]: Registered Authentication
> Agent for unix-process:26978:25862142 (system bus name :1.82
> [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path
> /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
> Sep 08 15:19:32 myhost.mydomain run.sh[26983]: Starting Freenet done
> Sep 08 15:19:32 myhost.mydomain sudo[26977]: pam_unix(sudo:session):
> session closed for user root
> Sep 08 15:19:32 myhost.mydomain systemd[1]: Started Freenet.
> -- Subject: Unit freenet.service has finished start-up
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit freenet.service has finished starting up.
> --
> -- The start-up result is done.
> Sep 08 15:19:32 myhost.mydomain polkitd[553]: Unregistered Authentication
> Agent for unix-process:26978:25862142 (system bus name :1.82, object path
> /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
> (disconnected from bus)
> Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Main process
> exited, code=exited, status=1/FAILURE
> Sep 08 15:19:33 myhost.mydomain run.sh[27031]: Freenet is not running.
> Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Unit entered
> failed state.
> Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Failed with
> result 'exit-code'.

(Sorry for the late answer, support is dealt with by volunteers, and nobody 
seemed to notice your mail back then.)

Please search your system for a file called "wrapper.log", the last few lines 
should tell why Freenet crashed.

Please review them for private information before sending them to this list.

Also, please tell us:
- which OS you are using
- how you installed Freenet, for example did you use one of the OS's packages?


signature.asc
Description: This is a digitally signed message part.
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] Moving freenet to another partition

2015-09-19 Thread Dave Larsen 
Srry I don't know how to start a new subject , but how do I use frost in
freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing
anything I'm lost please help!!!
On Sep 8, 2015 8:55 AM, "Ivo Vegter"  wrote:

> To move freenet from /opt to /home, I followed the instructions here:
> https://wiki.freenetproject.org/Moving_an_Installation
> i.e. I changed all occurrences of /opt in freenet.ini to /home.
>
> I use systemd, and updated the freenet.service file to reflect the new
> location. For good measure, I changed the freenet user's home directory
> from /opt/freenet to /home/freenet, too.
>
> Systemd was unable to start freenet, however. The log says only that the
> main process exited with status 1 and the systemd unit consequently failed
> with result 'exit-code'. (Exact log below.)
>
> I found more references to /opt in run.sh and wrapper.config, which
> suggests the above wiki page is incomplete, at best. I changed those
> occurrences too, but no luck.
>
> Pls halp.
> ​
> ​Ivo​
>
> ​LOG (note last 4 lines in particular):
>
> Sep 08 15:19:27 myhost.mydomain sudo[26977]:myuser : TTY=pts/0 ;
> PWD=/home/freenet ; USER=root ; COMMAND=/usr/bin/systemctl start freenet
> Sep 08 15:19:27 myhost.mydomain sudo[26977]: pam_unix(sudo:session):
> session opened for user root by myuser(uid=0)
> Sep 08 15:19:27 myhost.mydomain systemd[1]: Starting Freenet...
> -- Subject: Unit freenet.service has begun start-up
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit freenet.service has begun starting up.
> Sep 08 15:19:27 myhost.mydomain polkitd[553]: Registered Authentication
> Agent for unix-process:26978:25862142 (system bus name :1.82
> [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path
> /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
> Sep 08 15:19:32 myhost.mydomain run.sh[26983]: Starting Freenet done
> Sep 08 15:19:32 myhost.mydomain sudo[26977]: pam_unix(sudo:session):
> session closed for user root
> Sep 08 15:19:32 myhost.mydomain systemd[1]: Started Freenet.
> -- Subject: Unit freenet.service has finished start-up
> -- Defined-By: systemd
> -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
> --
> -- Unit freenet.service has finished starting up.
> --
> -- The start-up result is done.
> Sep 08 15:19:32 myhost.mydomain polkitd[553]: Unregistered Authentication
> Agent for unix-process:26978:25862142 (system bus name :1.82, object path
> /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
> (disconnected from bus)
> Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Main process
> exited, code=exited, status=1/FAILURE
> Sep 08 15:19:33 myhost.mydomain run.sh[27031]: Freenet is not running.
> Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Unit entered
> failed state.
> Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Failed with
> result 'exit-code'.
>
>
> ___
> Support mailing list
> Support@freenetproject.org
> http://news.gmane.org/gmane.network.freenet.support
> Unsubscribe at
> http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
> Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
>
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

[freenet-support] Moving freenet to another partition

2015-09-08 Thread Ivo Vegter 
To move freenet from /opt to /home, I followed the instructions here:
https://wiki.freenetproject.org/Moving_an_Installation
i.e. I changed all occurrences of /opt in freenet.ini to /home.

I use systemd, and updated the freenet.service file to reflect the new
location. For good measure, I changed the freenet user's home directory
from /opt/freenet to /home/freenet, too.

Systemd was unable to start freenet, however. The log says only that the
main process exited with status 1 and the systemd unit consequently failed
with result 'exit-code'. (Exact log below.)

I found more references to /opt in run.sh and wrapper.config, which
suggests the above wiki page is incomplete, at best. I changed those
occurrences too, but no luck.

Pls halp.
​
​Ivo​

​LOG (note last 4 lines in particular):

Sep 08 15:19:27 myhost.mydomain sudo[26977]:myuser : TTY=pts/0 ;
PWD=/home/freenet ; USER=root ; COMMAND=/usr/bin/systemctl start freenet
Sep 08 15:19:27 myhost.mydomain sudo[26977]: pam_unix(sudo:session):
session opened for user root by myuser(uid=0)
Sep 08 15:19:27 myhost.mydomain systemd[1]: Starting Freenet...
-- Subject: Unit freenet.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freenet.service has begun starting up.
Sep 08 15:19:27 myhost.mydomain polkitd[553]: Registered Authentication
Agent for unix-process:26978:25862142 (system bus name :1.82
[/usr/bin/pkttyagent --notify-fd 5 --fallback], object path
/org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
Sep 08 15:19:32 myhost.mydomain run.sh[26983]: Starting Freenet done
Sep 08 15:19:32 myhost.mydomain sudo[26977]: pam_unix(sudo:session):
session closed for user root
Sep 08 15:19:32 myhost.mydomain systemd[1]: Started Freenet.
-- Subject: Unit freenet.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit freenet.service has finished starting up.
--
-- The start-up result is done.
Sep 08 15:19:32 myhost.mydomain polkitd[553]: Unregistered Authentication
Agent for unix-process:26978:25862142 (system bus name :1.82, object path
/org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8)
(disconnected from bus)
Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Main process
exited, code=exited, status=1/FAILURE
Sep 08 15:19:33 myhost.mydomain run.sh[27031]: Freenet is not running.
Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Unit entered
failed state.
Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Failed with
result 'exit-code'.
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] Moving Freenet to another partition

2011-05-31 Thread Matthew Toseland 
On Sunday 29 May 2011 00:02:45 Daxter wrote:
 On May 28, 2011, at 8:35 AM, Stephen Mollett wrote:
  On Friday 27 May 2011 21:40:27 Daxter wrote:
  After further testing, I am absolutely sure that something is wrong here.
  To make sure that my findings were true, I renamed my original Freenet
  folder in /Applications/ to Freenet22, and then attempted run.sh from the
  new location. Every time it recreated a folder...
  
  Have a look in your freenet.ini file and see if it references the original 
  location at all. If so, try changing the references to point to the new 
  folder.
  
  I'm not a Mac person so I don't know whether there may be other factors 
  (such 
  as the OS somehow remembering the original path as the program's working 
  directory or something) but this would seem to be the most likely cause of 
  the 
  behaviour you see.
  
  Hope this helps,
  Stephen
 
 Thanks for the tip. I'll manually modify these and see if my node then works 
 properly.
 
 Unless there's some weird security issue requiring absolute path references, 
 why aren't we looking for these files in the current directory?

Check wrapper.conf.

If it's not that then it might be some mac-specific startup/launch script.


signature.asc
Description: This is a digitally signed message part.
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] Moving Freenet to another partition

2011-05-31 Thread Daxter 
On May 31, 2011, at 6:11 PM, Matthew Toseland wrote:
 On Sunday 29 May 2011 00:02:45 Daxter wrote:
 On May 28, 2011, at 8:35 AM, Stephen Mollett wrote:
 On Friday 27 May 2011 21:40:27 Daxter wrote:
 After further testing, I am absolutely sure that something is wrong here.
 To make sure that my findings were true, I renamed my original Freenet
 folder in /Applications/ to Freenet22, and then attempted run.sh from the
 new location. Every time it recreated a folder...
 
 Have a look in your freenet.ini file and see if it references the original 
 location at all. If so, try changing the references to point to the new 
 folder.
 
 I'm not a Mac person so I don't know whether there may be other factors 
 (such 
 as the OS somehow remembering the original path as the program's working 
 directory or something) but this would seem to be the most likely cause of 
 the 
 behaviour you see.
 
 Hope this helps,
 Stephen
 
 Thanks for the tip. I'll manually modify these and see if my node then works 
 properly.
 
 Unless there's some weird security issue requiring absolute path references, 
 why aren't we looking for these files in the current directory?
 
 Check wrapper.conf.
 
 If it's not that then it might be some mac-specific startup/launch script.


Turns out Stephen was right, the issue was the freenet.ini file. The list below 
holds all of the settings that specify a directory. As you can see, all but 
ssl.sslKeyStore and node.install.storeDir specify full paths from the root 
directory. Why is this? From my understanding they all should refer to the 
local directory (for portability) or there should be a single one that sets the 
absolute path for all the code to inherit. Why do some refer to the local 
directory, but most refer to the absolute directory?

ssl.sslKeyStore=datastore/certs
node.masterKeyFile=/Applications/Freenet/master.keys
node.downloadsDir=/Applications/Freenet/downloads
node.install.userDir=/Applications/Freenet
node.install.tempDir=/Applications/Freenet/temp-43346
node.install.pluginDir=/Applications/Freenet/plugins
node.install.persistentTempDir=/Applications/Freenet/persistent-temp-43346
node.install.cfgDir=/Applications/Freenet
node.install.runDir=/Applications/Freenet
node.install.nodeDir=/Applications/Freenet
node.install.storeDir=datastore

___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] Moving Freenet to another partition

2011-05-28 Thread Stephen Mollett 
On Friday 27 May 2011 21:40:27 Daxter wrote:
 After further testing, I am absolutely sure that something is wrong here.
 To make sure that my findings were true, I renamed my original Freenet
 folder in /Applications/ to Freenet22, and then attempted run.sh from the
 new location. Every time it recreated a folder...

Have a look in your freenet.ini file and see if it references the original 
location at all. If so, try changing the references to point to the new 
folder.

I'm not a Mac person so I don't know whether there may be other factors (such 
as the OS somehow remembering the original path as the program's working 
directory or something) but this would seem to be the most likely cause of the 
behaviour you see.

Hope this helps,
Stephen
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

[freenet-support] Moving Freenet to another partition

2011-05-27 Thread Daxter 
Hello all,

I want to move my Freenet folder to a larger partition in my computer which is 
running Mac OSX 10.6. I copied it over and moved the original folder in 
/Applications/ to the trash (not yet deleting it), and then attempted to run it 
from its new location. While starting up, however, it warned me that no 
seednodes.fref file existed and as such it could not connect to the opennet. A 
quick glance into /Applications/ and I found that Freenet had recreated a 
folder there and was repopulating it with a number of files, all of which 
probably were not properly loaded from the new location.

I have two theories as to what might be the cause:
1) After I chose the install directory during the original installation, the 
install script changed a preference file telling Freenet to always look for 
such files in /Applications/Freenet/ (the original install location) instead of 
the current directory.
2) regardless of where you choose to install Freenet, something has been 
hard-coded to look in /Applications/Freenet (for my OS at least).

Does anybody know why this is happening? I want to devote a larger portion of 
my HDD to Freenet, but this issue is preventing me from doing so.
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] Moving Freenet to another partition

2011-05-27 Thread Daxter 

On May 27, 2011, at 2:46 PM, Dsoslglece wrote:
 Le 27/05/11 21:32, Daxter a écrit :
 
 On May 27, 2011, at 2:28 PM, Dsoslglece wrote:
 Le 27/05/11 20:38, Daxter a écrit :
 
 Hello all,
 
 I want to move my Freenet folder to a larger partition in my computer 
 which is running Mac OSX 10.6. I copied it over and moved the original 
 folder in /Applications/ to the trash (not yet deleting it), and then 
 attempted to run it from its new location. While starting up, however, it 
 warned me that no seednodes.fref file existed and as such it could not 
 connect to the opennet. A quick glance into /Applications/ and I found 
 that Freenet had recreated a folder there and was repopulating it with a 
 number of files, all of which probably were not properly loaded from the 
 new location.
 
 I have two theories as to what might be the cause:
 1) After I chose the install directory during the original installation, 
 the install script changed a preference file telling Freenet to always 
 look for such files in /Applications/Freenet/ (the original install 
 location) instead of the current directory.
 2) regardless of where you choose to install Freenet, something has been 
 hard-coded to look in /Applications/Freenet (for my OS at least).
 
 Does anybody know why this is happening? I want to devote a larger portion 
 of my HDD to Freenet, but this issue is preventing me from doing so.
 Normally, Freenet works anywhere  (at least on Mac snow leopard).
 For instance, I've got it on my hard disk, but localized in a encrypted 
 sparse image bundle. 
 in fact, it is possible to take the whole folder containing it (after it 
 has been shutted), putting it somewhere else, and start it again, and 
 evrerything goes fine again.
 
 The only thing then that has to be changed, is the path to it (for the 
 commands), and also not to forget to indicate its new position to 
 LittleSnitch…
 
 You say that, and yet my experience proves otherwise. I originally installed 
 it in my Applications folder and then tried relocating it to another 
 partition. When starting via run.sh in the new directory, I had the issues 
 mentioned in my first email.
 Well I can only speak from what I have personnally experienced. But, are you 
 sure that you had the new path correctly indicated in terminal? 
 One of the surest method I know for this is to first enter : cd space, and 
 then, slide the Freenet folder on top of terminal, then enter.
 By the way, normally, you don't even need to get the old folder out of reach 
 in the garbage, you can have few FN Folders, as long as only one is started, 
 no problem
 You could also have put the original folder in the new location and started 
 it then… 
 
 Maybe you could open both folders side by side and compare the content ans 
 especially those files mentionned as missing…


After further testing, I am absolutely sure that something is wrong here. To 
make sure that my findings were true, I renamed my original Freenet folder in 
/Applications/ to Freenet22, and then attempted run.sh from the new location. 
Every time it recreated a folder with the following files in it. After checking 
that the folder had been recreated, I stopped Freenet and deleted the folder. I 
moved my new copy (on the larger partition) to a different directory, and the 
results were still the same. I even tried renaming the folder and it still 
happened. 

bookmarks.dat   downloads/  
node.db4o.crypt persistent-temp-43346/
bootID  extra-peer-data-43346/  opennet-10718   
plugins/
client-throttle.dat master.keys 
openpeers-10718 temp-43346/
completed.list.downloadsnode-43346  
openpeers-old-10718 uptime.dat
completed.list.uploads  node-throttle.dat   peers-43346

___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe