There is one issue with my WiFi that drives me crazy:
Freerunner nearly never associates with my WPA proteced AP. It connects for
about 7 seconds and disconnects afterwards, (goto: begin of sentence) ...
If I get connected (that happened 1 time since release of Om2008.8) the
nameserver entries
I've read through *several* Howto's and Wikis on how to configure Navit - I
installed navit from OM's repository and downloaded a binary map which is
included correctly. But even if my GPS has a fix - tangoGPS and AGPS Tool
both showed - Navi does not show the current location nor the current GPS
If you use one of this low-cost-NAT-routers (linksys, or something like
this) it's the easiest way to use routing + ip-forwarding.
Neo:
add route to NAT-router over PCs usb0
add NAT-router as nameserver
PC:
add route to Neo over usb0 interface
add route to NAT-router over eth0 interface
enable
Not very productive, but I have GNOME running on my Freerunner!! :-) . I
should say it feels so good.
Is it ok to attach images to mails to the mailing list?
___
support mailing list
support@lists.openmoko.org
Hi,
I have been using freerunner for about a month now. I have updated
the software from the daily builds.
From the time I got the phone, I have these problems:
1. The ringer switches off (i.e. the phone goes into silent mode)
after the 1st standby (5min standby).
2. After the first standby the
On Wed, Aug 20, 2008 at 11:27 AM, sparky mat [EMAIL PROTECTED] wrote:
Not very productive, but I have GNOME running on my Freerunner!! :-) . I
should say it feels so good.
Is it ok to attach images to mails to the mailing list?
heh, great :)
Upload your images to http://imagebin.org/ or some
Am 20.08.2008 um 08:58 schrieb Bernhard Schauer:
I've read through *several* Howto's and Wikis on how to configure
Navit - I installed navit from OM's repository and downloaded a
binary map which is included correctly. But even if my GPS has a fix
- tangoGPS and AGPS Tool both showed -
I have completely drained my battery to the point where the Freerunner
will not boot and hence I cannot charge it.
From the Wiki:
Make sure that the battery never discharges completely. This is an issue
because
the internal charging circuitry can not be turned on until the FreeRunner has
2008/8/20 Muthu Subramanian [EMAIL PROTECTED]
Hi,
I have been using freerunner for about a month now. I have updated
the software from the daily builds.
From the time I got the phone, I have these problems:
...
4. Where are the boot messages stored? ( I can see some kind of 'help'
Shawn,
you wrote:
./dfu-util a rootfs -R -D ./builds/200808-8/Om2008.8.rootfs.jffs2
You need a dfu-util -a rootfs not dfu-util a rootfs
___
support mailing list
support@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/support
Following your lead several days later, while installing xfce4 and
gdm, zhone-session, frameworkd and several other FSO components were
uninstalled. What are you using for a phone application? Also, with
the referenced error below, how do you respond to the screen prompt
from GDM about X
Am Mittwoch, den 20.08.2008, 16:28 +0200 schrieb Bernhard Schauer:
Check the vehicle entries. If at least active is 0 then the
GPS configured will not be used.
vehicle name=Meins enabled=yes active=1 follow=1
refresh=1
For 1 2, see http://docs.openmoko.org/trac/ticket/1599
For 3, see http://lists.openmoko.org/pipermail/community/2008-August/025388.html
-Steven
On Wed, Aug 20, 2008 at 3:31 AM, Muthu Subramanian [EMAIL PROTECTED] wrote:
Hi,
I have been using freerunner for about a month now. I have updated
Seems my only choice is to reinstall.
nope. the file to modify is nothing but text.
just take the sd card, put it into a cardreader and do the modifications.
___
support mailing list
support@lists.openmoko.org
Thanks! Still don't know what I'm thinking
On Aug 20, 2008, at 9:16 AM, arne anka wrote:
Seems my only choice is to reinstall.
nope. the file to modify is nothing but text.
just take the sd card, put it into a cardreader and do the
modifications.
sparky mat wrote:
Not very productive, but I have GNOME running on my Freerunner!! :-) . I
should say it feels so good.
Is it ok to attach images to mails to the mailing list?
Way cool. If you don't have the time to make a nice wiki page, please
post here whatever notes you have and I'll
On Wed, Aug 20, 2008 at 12:17 PM, Konstantin [EMAIL PROTECTED] wrote:
Andy Green wrote:
Somebody in the thread at some point said:
| I have completely drained my battery to the point where the Freerunner
| will not boot and hence I cannot charge it.
I've used 3 AA batteries in series
Quote : and booting through USB power alone does not work.
Fact is that on my Neo1973 it is working fine to charge with USB power
alone.
Look at the Wiki (OK I found much more infos on it since the last four
months..) ... somewhere it says (and that's true) that your Neo (I figure
it's the same
I think the fixed bug the wiki refers to is a state where the phone
would discharge the battery while plugged into a charger...
The unbootable state is a known hardware bug. I don't think leaving it
plugged in and turned off will help. It might even drain the battery
further. I think
Hello,
Why is opkg trying to install kernel and other packages for the
neo1973 on my FreeRunner?
[EMAIL PROTECTED]:~# opkg -test upgrade
Upgrading angstrom-version on root from 1:-20080812-r1 to 1:-20080820-r1...
Downloading
http://buildhost.openmoko.org/daily-feed/om-gta02//angstrom-version_
First I started AGPS GUI and waited for the GPS to get a fix; then close
ist, check if gpsd is running and gps is enabled in settings and starting
tangoGPS - which shows the correct current position. Again checking if gpsd
is running and gps is enabled after closing tangoGPS then starting navit,
Hi everyone,
I got my FreeRunner today, I love the device already!
I immediately upgraded to the ASU (since I saw no point in playing
around with a deprecated software stack, even if it does work better)
but for some reason TangoGPS doesn't work in it! Most buttons don't work
(Map/Trip/...)
Jelle De Loecker wrote:
I immediately upgraded to the ASU (since I saw no point in playing
around with a deprecated software stack, even if it does work better)
but for some reason TangoGPS doesn't work in it! Most buttons don't work
(Map/Trip/...) the screen is useless, ...
I went for the
Doh!
Thanks, that worked.
xiangfu wrote:
i see you command you run
./dfu-util a rootfs -R -D ./builds/200808-8/Om2008.8.rootfs.jffs2
if should :
./dfu-util-a rootfs -R -D ./builds/200808-8/Om2008.8.rootfs.jffs2
maybe you ignore the - before a
- Original
There have been some posts on the community list about people having success
with FSO and GPRS using scripts from the wiki[1]. I seem to be having less
luck. I'm running a fresh install of FSO from today's build (20080820).
I run the following dbus command to try to activate GPRS:
# mdbus -s
On Wed, Aug 20, 2008 at 11:23 PM, Timo Juhani Lindfors [EMAIL PROTECTED]
wrote:
Hi,
Dylan Semler [EMAIL PROTECTED] writes:
Aug 22 08:08:14 om-gta02 daemon.notice modprobe: FATAL: Error inserting
ppp_generic (/lib/modules/2.6.24/kernel/drivers/net/ppp_generic.ko):
Unknown
symbol in
On Wed, Aug 20, 2008 at 11:37 PM, Dylan Semler [EMAIL PROTECTED]wrote:
On Wed, Aug 20, 2008 at 11:23 PM, Timo Juhani Lindfors
[EMAIL PROTECTED] wrote:
Hi,
Dylan Semler [EMAIL PROTECTED] writes:
Aug 22 08:08:14 om-gta02 daemon.notice modprobe: FATAL: Error inserting
ppp_generic
27 matches
Mail list logo
