Hi,
On Sun, 29.03.2009 at 15:20:11 +0100, Joerg Reisenweber jo...@openmoko.org
wrote:
FR is not expected to work without battery. That's technically impossible
basically. GSM will take 2A in spikes, and usb can deliver max 500mA, from
I seem to have expressed myself in a misleading way. I
FR is not expected to work without battery. That's technically
impossible basically. GSM will take 2A in spikes, and usb can
deliver max 500mA, from
What about running the FR without using GSM?
Works fine for me.
I'd think so, but what is the max power consumption in that case?
FR is not expected to work without battery. That's technically impossible
basically. GSM will take 2A in spikes, and usb can deliver max 500mA, from
wallcharger FR may accept up to 1A. As soon as system power consumption gets
higher than what USB can deliver, FR is powering down of course.
The
On Sat, Mar 28, 2009 at 11:23:17PM +0100, Michael 'Mickey' Lauer wrote:
Correct. This will be fixed with the new combined battery object that
aggregates the information from various power sources. If noone beats me to
it, I'll try to get it done after OpenExpo.
Btw, (how) will FSO
FR is not expected to work without battery. That's technically impossible
basically. GSM will take 2A in spikes, and usb can deliver max 500mA, from
What about running the FR without using GSM?
Stefan
___
support mailing list
On Sun, Mar 29, 2009 at 02:37:37PM -0400, Stefan Monnier wrote:
FR is not expected to work without battery. That's technically impossible
basically. GSM will take 2A in spikes, and usb can deliver max 500mA, from
What about running the FR without using GSM?
Works fine for me.
--
Toni Mueller wrote:
thank you for pointing this out. I'll try to check that next time. It
means that I can't boot and work on the FR w/o battery, though, because
I need the device to be connected to a computer in order to do
maintenance. Maybe this will be reworked sometime, because it's
On Sat, Mar 28, 2009 at 01:31:56PM +0100, Sebastian Spaeth wrote:
USB only delivers 100mA until a higher rate is negotiated. But for this
to happen you need to have the kernel and the usb drivers loaded
already, so it is kind of difficult. And the FR uses more than 100mA
when booting.
USB
Hi,
On Sat, 28.03.2009 at 13:31:56 +0100, Sebastian Spaeth sebast...@sspaeth.de
wrote:
I am not a hardware guy! but...
I'm not a hardware guy, too. I have opinions about how things *should*
work, however (eg. work as advertised).
USB only delivers 100mA until a higher rate is negotiated.
On Saturday 28 March 2009 16:14:52 Rask Ingemann Lambertsen wrote:
On Sat, Mar 28, 2009 at 01:31:56PM +0100, Sebastian Spaeth wrote:
USB only delivers 100mA until a higher rate is negotiated. But for this
to happen you need to have the kernel and the usb drivers loaded
already, so it is
Hi,
today, my FR suddenly powered down, due to unknown reason (I didn't see
a shutdown message). The battery should have had 2/3rds of its capacity
left over at that time. I was unable to awaken the device, not even
with USB power. Then, I pulled it apart to remove the battery and the
SIM card
From: Toni Mueller supp...@oeko.net
To: support@lists.openmoko.org
Sent: Friday, March 27, 2009 9:19:15 AM
Subject: Device somehow powered down - would not power up again
Hi,
today, my FR suddenly powered down, due to unknown reason (I didn't see
a shutdown message
12 matches
Mail list logo
