Re: infinite pcf50633_irq messages , no X
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | Thank you very much, I will play with those when i can connect again (i | reflashed the root filesystem, which has the freerunner working as new | again, but now i have lost usb0 on the host laptop). :-/ Sorry about that, because the modules are packaged separately now we pushed the Ethernet gadget into a module you need to install a couple of new packages. Thomas B. found you need to # opkg install kernel-module-g-ether kernel-module-cdc-ether # depmod before you reboot into new kernel. - -Andy -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkiWtNkACgkQOjLpvpq7dMr+lwCfRtvTRmqnNp9TsDVlAICHuC4v nWgAn17NT6xHKkhfRwficT0eeKDR0opE =4e30 -END PGP SIGNATURE- ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: infinite pcf50633_irq messages , no X
Andy Green wrote: > Somebody in the thread at some point said: > > | I am happy to try anything, but i can't find a how-to for altering > | loglevel or disabling tty0. I don't have a debug board, if that makes > | any difference. > > Both of these can be done on the kernel commandline in U-Boot environment, > > loglevel=8 <== show all kinds of messages on console > loglevel=4 <== only more critical > > console=tty0 <=== use the LCM as console > > | If the error messages were suppressed, would i see the x windows screen? > | Is the graphical 'desktop' likely to be running, but the lcd display is > | tasked away to show the output of tty0? > > It can happen, you can use > > chvt > > to force the display to vt 1-4 IIRC. > > Or, > > ps -Af > > will give you a list of processes running, look for X in there. > > -Andy Thank you very much, I will play with those when i can connect again (i reflashed the root filesystem, which has the freerunner working as new again, but now i have lost usb0 on the host laptop). ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: infinite pcf50633_irq messages , no X
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | I am happy to try anything, but i can't find a how-to for altering | loglevel or disabling tty0. I don't have a debug board, if that makes | any difference. Both of these can be done on the kernel commandline in U-Boot environment, loglevel=8 <== show all kinds of messages on console loglevel=4 <== only more critical console=tty0 <=== use the LCM as console | If the error messages were suppressed, would i see the x windows screen? | Is the graphical 'desktop' likely to be running, but the lcd display is | tasked away to show the output of tty0? It can happen, you can use chvt to force the display to vt 1-4 IIRC. Or, ps -Af will give you a list of processes running, look for X in there. - -Andy -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkiWJmoACgkQOjLpvpq7dMqRVgCghzVpnisIfFsvDw1D37rQCI19 I5IAn1V93nhy4PjemRibaPxedDMecWUM =PxHz -END PGP SIGNATURE- ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: infinite pcf50633_irq messages , no X
Andy Green wrote: > Somebody in the thread at some point said: > > | pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work > | pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 > | ADCRDY <=== > > Is something sitting polling the voltage on the battery using the old > ADC / voltage method? > > | pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work > | pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 > | SECOND ADCRDY <=== > > Sometimes its a SECOND interrupt too, hum. > > | I tried booting the phone without the sim card or the sd card but the > | only difference I could see was that it now said pcf=c7d36c00 in the > | scrolling text. > > That can change around, it's just a pointer. > > I guess we should just turn off these debugging messages, although > they're actually interesting to me I doubt it's so interesting for > everyone. They don't seem to show anything obviously evil. > > Another thing you can do is change your loglevel and / or having tty0 as > a console at all on the kernel commandline. > > -Andy I am happy to try anything, but i can't find a how-to for altering loglevel or disabling tty0. I don't have a debug board, if that makes any difference. If the error messages were suppressed, would i see the x windows screen? Is the graphical 'desktop' likely to be running, but the lcd display is tasked away to show the output of tty0? ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: infinite pcf50633_irq messages , no X
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work | pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 | ADCRDY <=== Is something sitting polling the voltage on the battery using the old ADC / voltage method? | pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work | pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 | SECOND ADCRDY <=== Sometimes its a SECOND interrupt too, hum. | I tried booting the phone without the sim card or the sd card but the | only difference I could see was that it now said pcf=c7d36c00 in the | scrolling text. That can change around, it's just a pointer. I guess we should just turn off these debugging messages, although they're actually interesting to me I doubt it's so interesting for everyone. They don't seem to show anything obviously evil. Another thing you can do is change your loglevel and / or having tty0 as a console at all on the kernel commandline. - -Andy -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkiWDAMACgkQOjLpvpq7dMrsOwCffx+PFzOSE0Pb1+ZNjpUmk0PM OAEAmgNcfH1KXKZcyxpOAlvBRzgVtyCZ =b1u4 -END PGP SIGNATURE- ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: infinite pcf50633_irq messages , no X
Andy Green wrote: > Somebody in the thread at some point said: > | after opkg upgrade from ssh, i get the infinite irq error messages > | scrolling away. I followed > | http://www.mail-archive.com/support@lists.openmoko.org/msg00068.html but > | to no effect. If i restart X I get the orange 'Openmoko please wait' > | splash screen, then back to the scrolling irq errors. > | As I am a clueless noob, is there something obvious i am missing? Like X > | is running but i don't know how to switch focus to it? Or a way to not > | display the error messages? > | Is there a way to opkg downgrade to factory settings and start again? > > No example of the infinite message? I would guess it might be SECOND > interrupt, did you try clicking the power button? > > -Andy Sorry about the lack of an example, here we go: pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 ADCRDY pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 SECOND ADCRDY pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 SECOND ADCRDY pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 SECOND ADCRDY pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 ADCRDY pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 SECOND ADCRDY pcf50633_irq: entering(irq=53, pcf=c7d34c00): scheduling work pcf50633_work: INT1=0x00 INT2=0x00 INT3=0x40 INT4=0x00 INT5=0x00 ADCRDY and so on. I have tried clicking, double clicking, and triple clicking both buttons separately and combined. The power button inserts ONKEYF and ONKEYR into the ever-scrolling text. I tried booting the phone without the sim card or the sd card but the only difference I could see was that it now said pcf=c7d36c00 in the scrolling text. ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: infinite pcf50633_irq messages , no X
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Somebody in the thread at some point said: | after opkg upgrade from ssh, i get the infinite irq error messages | scrolling away. I followed | http://www.mail-archive.com/support@lists.openmoko.org/msg00068.html but | to no effect. If i restart X I get the orange 'Openmoko please wait' | splash screen, then back to the scrolling irq errors. | As I am a clueless noob, is there something obvious i am missing? Like X | is running but i don't know how to switch focus to it? Or a way to not | display the error messages? | Is there a way to opkg downgrade to factory settings and start again? No example of the infinite message? I would guess it might be SECOND interrupt, did you try clicking the power button? - -Andy -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkiV7HQACgkQOjLpvpq7dMosLgCfQqzWlTGWEXT/+P3crV+h69Gl unEAn2S3omhDSp4i0EvusWgf9iLHBoKJ =isLy -END PGP SIGNATURE- ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
Re: infinite pcf50633_irq messages , no X
can't help you with your irq problem, but ... > Is there a way to opkg downgrade to factory settings and start again? not with opkg, no (not w/o much hassle anyway). but you can easily flash another kernel-image and rootfs via dfu-util. > http://wiki.openmoko.org/wiki/Flashing_the_Neo_FreeRunner ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
infinite pcf50633_irq messages , no X
after opkg upgrade from ssh, i get the infinite irq error messages scrolling away. I followed http://www.mail-archive.com/support@lists.openmoko.org/msg00068.html but to no effect. If i restart X I get the orange 'Openmoko please wait' splash screen, then back to the scrolling irq errors. As I am a clueless noob, is there something obvious i am missing? Like X is running but i don't know how to switch focus to it? Or a way to not display the error messages? Is there a way to opkg downgrade to factory settings and start again? ___ support mailing list support@lists.openmoko.org https://lists.openmoko.org/mailman/listinfo/support
