I can't get the qtopia dialer to work.
I've tried freshly-flashed 2008.8 and the qtopia current stable images.
I'm using t-mobile in the US, and have no problems with 2008.2's dialer
program. It registers with the network, so I don't think this is the
problem that other people have been reporting.
The qtopia dialer does one of the following things after I press dial:
- immediately exit. Some red text box flashes for a second, I think.
- sits on the 'show keypad' screen, and makes a bit of bus noise, but
is otherwise silent. I think this makes an outgoing call that I can't hear.
- tells me I have an incoming call from the number I'm dialing
- produce an empty text message from 129 (though this might have
nothing to do with the dialer...)
I've noticed that I have to manually turn the volume up after each call
I make with the 2008.2 image. Other than that, calls under 2008.2 work
fine.
qpe uses 100% cpu for ~ 4 hours after boot as it needs to scan the SD
card for media files (I used strace to confirm that this is what it's up
to...). So, I pulled the SD card, and reproduced the problem with the
current qtopia image.
Any ideas?
-Rusty
___
support mailing list
support@lists.openmoko.org
https://lists.openmoko.org/mailman/listinfo/support
