Re: [pfSense Support] Native VLAN Question
i would do the latter and leave the parent interface with no ip address On Thu, 2007-02-22 at 16:12 -0400, Esteban Zarikian wrote: Hi, I was wondering, if I'm going to use one NIC for access to 5 VLANs through a 802.1q trunk, what is the proper way to access the native VLAN in PFSense. I am using some SRW248G4 linksys switches and they force VLAN1 to be present on all trunks, also I don't know where the setting is, but I'm pretty sure the native VLAN on these trunks is VLAN1. The native VLAN is the VLAN where the trunk port sees frames that come in untagged to the Trunk port. Since I'm using VLAN1, I want to make the Firewall's trunk port so that it sees VLANs 1,2,3,10 and 11, but I'm unsure if I should be using xl0 (the parent interface to the trunk port) as the port for VLAN1 or set up a vlan type interface for VLAN1, that way the two options are: xl0-VLAN1 vlan0-VLAN2 vlan1-VLAN3 vlan2-VLAN10 vlan3-VLAN11 and the other is vlan0-VLAN1 vlan1-VLAN2 vlan2-VLAN3 vlan3-VLAN10 vlan4-VLAN11 Do you have any tips on doing this? thanks in advance guys! Regards, Esteban Zarikian - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] DST 2007-ready?
Hi, How can I tell that my pfsense firewalls are DST 2007-ready? What to do if not? I am running 1.0.1-SNAPSHOT-01-19-2007. JR Have a burning question? Go to www.Answers.yahoo.com and get answers from real people who know. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] DST 2007-ready?
Both FreeBSD 6.1 and 6.2 are already ready for this change IIRC. If you are in doubt, update to this months snapshot which is based on 6.2 and definitely has support for congresses half-brained decision. Scott On 2/23/07, LJ Rand [EMAIL PROTECTED] wrote: Hi, How can I tell that my pfsense firewalls are DST 2007-ready? What to do if not? I am running 1.0.1-SNAPSHOT-01-19-2007. JR Have a burning question? Go to www.Answers.yahoo.com and get answers from real people who know. - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] Squid missmatch parsing config
Was looking at the rules that webgui makes and verified an imperfection in the positioning of the rules of cache_mem, cache_dir and cache_replacement_policy heap , memory_replacement_policy . cache_dir diskd /var/squid/cache 4000 16 256 cache_mem 8 MB maximum_object_size 5 KB minimum_object_size 0 KB cache_replacement_policy heap LFUDA memory_replacement_policy heap GDSF in these positions squid first reads the directive of cache_dir and the cache_mem placed for use of squid. However squid reads this and assumes policing DEFAULT LRU. And ignores the variables of control cache_replacement_policy heap LFUDA memory_replacement_policy heap GDSF that the directive are defined in the configuration after cache_dir and cache_mem. I verified this with the command. # squidclient mgr:storedir HTTP/1.0 200 OK Server: squid/2.6.STABLE5 Date: Sat, 24 Feb 2007 00:50:36 GMT Content-Type: text/plain Expires: Sat, 24 Feb 2007 00:50:36 GMT Last-Modified: Sat, 24 Feb 2007 00:50:36 GMT X-Cache: MISS from cerberus.biosystems.ath.cx Via: 1.0 cerberus.biosystems.ath.cx:3128 (squid/2.6.STABLE5) Proxy-Connection: close Store Directory Statistics: Store Entries : 6745 Maximum Swap Size : 4096000 KB Current Store Swap Size: 132968 KB Current Capacity : 3% used, 97% free Store Directory #0 (diskd): /var/squid/cache FS Block Size 2048 Bytes First level subdirectories: 16 Second level subdirectories: 256 Maximum Size: 4096000 KB Current Size: 132968 KB Percent Used: 3.25% Current load metric: 100 / 1000 Filemap bits in use: 6718 of 16384 (41%) Filesystem Space in use: 142272/9430356 KB (2%) Filesystem Inodes in use: 10833/1224702 (1%) Flags: SELECTED Pending operations: 0 Removal policy: lru LRU reference age: 11.06 days Now I manually modified squid.conf and modified the position of the rules and it's work OK unless you it makes a reboot. cache_replacement_policy heap LFUDA memory_replacement_policy heap GDSF cache_dir diskd /var/squid/cache 4000 16 256 cache_mem 8 MB maximum_object_size 5 KB minimum_object_size 0 KB # squidclient mgr:storedir HTTP/1.0 200 OK Server: squid/2.6.STABLE5 Date: Sat, 24 Feb 2007 00:53:47 GMT Content-Type: text/plain Expires: Sat, 24 Feb 2007 00:53:47 GMT Last-Modified: Sat, 24 Feb 2007 00:53:47 GMT X-Cache: MISS from cerberus.biosystems.ath.cx Via: 1.0 cerberus.biosystems.ath.cx:3128 (squid/2.6.STABLE5) Proxy-Connection: close Store Directory Statistics: Store Entries : 6745 Maximum Swap Size : 4096000 KB Current Store Swap Size: 132968 KB Current Capacity : 3% used, 97% free Store Directory #0 (diskd): /var/squid/cache FS Block Size 2048 Bytes First level subdirectories: 16 Second level subdirectories: 256 Maximum Size: 4096000 KB Current Size: 132968 KB Percent Used: 3.25% Current load metric: 100 / 1000 Filemap bits in use: 6718 of 16384 (41%) Filesystem Space in use: 142272/9430356 KB (2%) Filesystem Inodes in use: 10833/1224702 (1%) Flags: Pending operations: 0 Removal policy: heap -- - = - = - = - = - = - = - = - = - = - . Of course it runs William David Armstrong |== Bio Systems Security Networking ' NetBSD, OpenBSD or FreeBSD MSN / GT biosystems gmail . com -- - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
