2009/8/11 Fabien Germain fabien.germ...@gmail.com:
Hi,
On Tue, Aug 11, 2009 at 12:13 PM, Kevin Kimani kevinkim...@gmail.com
wrote:
Not going through dont understand how you are able to do that
mail kevin # telnet mail.aphrc.org 25
Trying 41.220.120.26...
telnet: Unable to connect to
Hi,
When reading several posts, I found much info about load balancing...
but this is something I don't need.
What I would like to have, is to route all internet traffic through
one interface (an PPPoE session), and some traffic (terminal server
smtp) from the other interface (incoming).
If I
Michel Servaes wrote:
Hi,
When reading several posts, I found much info about load balancing...
but this is something I don't need.
What I would like to have, is to route all internet traffic through
one interface (an PPPoE session), and some traffic (terminal server
smtp) from the other
Having a problem with vpn setup wondering if anyone else is also??
The VPN software is Cisco.
This is the setup
VPN Client - Ethernet Switch - pfsense - Internet - VPN Concentrator
A client behind a pfsense can use internet, email, everything else just
fine, expect VPN. When i run a packet
On Tue, Aug 11, 2009 at 8:02 PM, Evgeny Yurchenkoevg.yu...@rogers.com wrote:
cd /usr/ports/devel/git make install
-- Ends with
=== Configuring for git-1.6.4
=== Building for git-1.6.4
GIT_VERSION = 1.6.4
* new build flags or prefix
... many compilations here ...
Silly question, where the heck is the logout button?
jlc
-
To unsubscribe, e-mail: support-unsubscr...@pfsense.com
For additional commands, e-mail: support-h...@pfsense.com
Commercial support available -
On Wed, Aug 12, 2009 at 10:57 AM, Scott Ullrichsullr...@gmail.com wrote:
On Tue, Aug 11, 2009 at 8:02 PM, Evgeny Yurchenkoevg.yu...@rogers.com wrote:
cd /usr/ports/devel/git make install
-- Ends with
=== Configuring for git-1.6.4
=== Building for git-1.6.4
GIT_VERSION = 1.6.4
* new
On Wed, Aug 12, 2009 at 10:15, Joseph L.
Casalejcas...@activenetwerx.com wrote:
Silly question, where the heck is the logout button?
There isn't one in the 1.2 series since it uses HTTP authentication.
-
To unsubscribe, e-mail:
There isn't one in the 1.2 series since it uses HTTP authentication.
Argh, that means I have to close my browser:) I always have so much open
like Nagios etc in other tabs...
Thanks!
jlc
In message
abf9510930e1374ba4b4c61a01104fbda36...@monterossa.activenetwerx.local
Joseph L. Casale
jcas...@activenetwerx.com was claimed
to have wrote:
There isn't one in the 1.2 series since it uses HTTP authentication.
Argh, that means I have to close my browser:)
You could close your browser,
You could close your browser, or you could use a browser that implements
a method to forget HTTP authentication.
I would be interested in a reco for an alternative browser then, sure.
I use ff only because its foot print is light and it works well, hell
I'd use ie on my windows workstation if it
On Wed, Aug 12, 2009 at 11:00 AM, Joseph L.
Casalejcas...@activenetwerx.com wrote:
Argh, that means I have to close my browser:) I always have so much open
like Nagios etc in other tabs...
You could use a different browser for pfsense. It's an inconvenience,
but probably more convenient than
On Wed, Aug 12, 2009 at 11:10 AM, Joseph L.
Casalejcas...@activenetwerx.com wrote:
Can ff be setup to do this?
In Windows FF3.5
ToolsClear Recent HistoryDetailsActive Logins
I believe that should do it.
db
-
To unsubscribe,
On Wed, Aug 12, 2009 at 1:10 PM, David Burgessapt@gmail.com wrote:
You could use a different browser for pfsense. It's an inconvenience,
but probably more convenient than closing all your tabs.
Install the Web Developer Toolbar for firefox and then select
Miscellaneous - Clear Private Data
Can ff be setup to do this?
In Windows FF3.5
ToolsClear Recent HistoryDetailsActive Logins
I believe that should do it.
Fantastic, thanks!
jlc
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hey, i'm using pfsense with transparent proxy (squid + squidGuard)
working well here.
But some users on my network are using ultrasurf that everything know
use port 443 to connect on proxyes around internet.
Isn't possible to block 443 port and open
Anyone know what is involved in setting up a cert when using a windows CA?
I can use OpenSSL on a Linux host to do the conversion from the format the
Windows CA outputs (I don't know if I can output it natively?). What do I
use for the RSA private key, or more to the effect, how do I get that out
On Wed, Aug 12, 2009 at 10:52 AM,
apiase...@midatlanticbb.comapiase...@midatlanticbb.com wrote:
Having a problem with vpn setup wondering if anyone else is also??
The VPN software is Cisco.
The Cisco has to have NAT-T enabled.
Scott Ullrich wrote:
On Wed, Aug 12, 2009 at 10:57 AM, Scott Ullrichsullr...@gmail.com wrote:
On Tue, Aug 11, 2009 at 8:02 PM, Evgeny Yurchenkoevg.yu...@rogers.com wrote:
http-push.c:1269: error: 'parser' undeclared (first use in this function)
gmake: ***
To put it simple (I think), is that OPT1 should be treated as incoming
traffic, and WAN should only be used for outgoing traffic (eg.
internet, radio, downloading, ...)
Hope this makes sense... kind regards
It was indeed a sanity check... and it would be the first time actually
implementing a
On Wed, Aug 12, 2009 at 4:55 PM,
apiase...@midatlanticbb.comapiase...@midatlanticbb.com wrote:
Chris Buechler wrote:
On Wed, Aug 12, 2009 at 10:52 AM,
apiase...@midatlanticbb.comapiase...@midatlanticbb.com wrote:
Having a problem with vpn setup wondering if anyone else is also??
The VPN
21 matches
Mail list logo
