Frederick,
1. Here are the files: https://community.elphel.com/f
iles/393/20180308_test_0x5d/
2. Before copying - boot from the card and check the linux version:
> root@elphel393:~# uname -r
> 4.9.0-xilinx-v2017.3
* If it's 4.9.0-xilinx-v2017.3 then copying only devicetree.dtb and uImage
Hi,
> Can you send me an updated version of the firmware using the 0x5D addr
> please?
>
Ok, I will send you a link once I prepare it later today. I will turn the
kernel debug on.
Will I be able to copy the files you will send me on the camera micro SD
> card so I can boot from it?
>
Do you
Hello Oleg,
Thank you for your fast response.
I'm not able to build the firmware at the moment. Following the spec,
changing the SADDR pin to a HIGH value should translate the device ID to
0xBA, so *0x5D* as the 7-bit address.
I'm able to read the device registers on your sensor board using the