Re: [Elphel-support] about "103982"

2020-11-07 Thread ali tamimi 
Dear Andery,

I'm a master student and driving "CMV" is vital for my thesis.Most of the
funds have been used for providing the elphel camera and the sensor. I'm
negotiating with my supervisor for an extra fund ,Unfortunately, it seems
this is a time consuming process and the result is ambiguous.
I have read about the "Driverless mode 393", can it be used for "CMV"
sensors? Does it help me to simplify the procedure?
In general, your documentation is very comprehensive, but I can not find
any documents on your website that describe the stages of changing any
desired sensor with your default one.

Ali



On Fri, Oct 30, 2020 at 3:32 PM Elphel Support <
support-list@support.elphel.com> wrote:

> Dear Ali,
>
> The new sensor will need new Verilog code for the sensor. I know
> developers in Lithuania were able to develop code for a smaller CMV300 as
> well as the PCB themselves.
> And yes, the Linux driver will also be needed for it.
>
> We can definitely help by consultations, and give the PCBs - just bare
> boards, not assembled/tested. We may get more involved if this project will
> be appropriately funded.
>
> Andrey
>
>
>  On Wed, 28 Oct 2020 07:36:14 -0600 *ali tamimi
> >* wrote 
>
> Dear Andrey,
>
> I like to complete this project (AMS sensors) , and also provided CMV8000
> sensor. Can I count on your continual support?
> Actually I'm a HDL developer but there are many verilog and python codes
> and I'm a little confused and do not know which sections should be
> changed?  My question is which part of FPGA code should be changed or
> replaced ? Should Python and PHP codes be changed as well? What about
> Linux kernel drivers?
> We have started PCB design . Could I send the PCB file and ask for your
> comments?
>
> Ali
>
> On Tue, Oct 27, 2020 at 5:14 PM Elphel Support <
> support-list@support.elphel.com> wrote:
>
> Dear Ali,
>
> We developed the PCBs for CMV12000 for our customer who decided to cancel
> the project. So we have the boards built, but we never assembled and tested
> them and we haven't designed FPGA and firmware code. We may revive this
> project in the future, but our current focus is on long-range 3D with
> visible and infrared cameras, and for visible range we prefer rolling
> shutter, not the snapshot ones.
>
> Andrey
>
>
>  On Tue, 27 Oct 2020 02:15:32 -0600 *ali tamimi
> >* wrote 
>
> Dear All
> I was browsing your website that saw a long list of sensors will be
> supported in future . It is a remarkable achievement  if  all of  various
> sensors are supported in future.
> As you mentioned the "103982" board for the sensor front end CMV12000 can
> be connected to 10393. You put PCB files but don't explain about software
> requirements. Is there any special driver for it; or need code change?
> Another question, why do you not mention CMV12000 in the main list of
> supported sensors?
> I provide CMV8000 and want to drive it with your product "10393" and need
> your help to do that. It makes me proud to be part of your community and
> collaborate in your project.
> best regards
> ___
> Support-list mailing list
> Support-list@support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
>
> ___
> Support-list mailing list
> Support-list@support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
>
>
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

Re: [Elphel-support] about "103982"

2020-11-02 Thread Elphel Support 
Dear Ali,



The new sensor will need new Verilog code for the sensor. I know developers in 
Lithuania were able to develop code for a smaller CMV300 as well as the PCB 
themselves.

And yes, the Linux driver will also be needed for it.



We can definitely help by consultations, and give the PCBs - just bare boards, 
not assembled/tested. We may get more involved if this project will be 
appropriately funded.



Andrey



 On Wed, 28 Oct 2020 07:36:14 -0600 ali tamimi  
wrote 


Dear Andrey,



I like to complete this project (AMS sensors) , and also provided CMV8000 
sensor. Can I count on your continual support? 

Actually I'm a HDL developer but there are many verilog and python codes and 
I'm a little confused and do not know which sections should be changed?  My 
question is which part of FPGA code should be changed or replaced ? Should 
Python and PHP codes be changed as well? What about Linux kernel drivers?

We have started PCB design . Could I send the PCB file and ask for your 
comments?



Ali



On Tue, Oct 27, 2020 at 5:14 PM Elphel Support 
 wrote:

Dear Ali,



We developed the PCBs for CMV12000 for our customer who decided to cancel the 
project. So we have the boards built, but we never assembled and tested them 
and we haven't designed  FPGA and firmware code. We may revive this project in 
the future, but our current focus is on long-range 3D with visible and infrared 
cameras, and for visible range we prefer rolling shutter, not the snapshot ones.



Andrey



 On Tue, 27 Oct 2020 02:15:32 -0600 ali tamimi 
 wrote 


Dear All

I was browsing your website that saw a long list of sensors will be supported 
in future . It is a remarkable achievement  if  all of  various sensors are 
supported in future. 

As you mentioned the "103982" board for the sensor front end CMV12000 can be 
connected to 10393. You put PCB files but don't explain about software 
requirements. Is there any special driver for it; or need code change? 

Another question, why do you not mention CMV12000 in the main list of supported 
sensors?

I provide CMV8000 and want to drive it with your product "10393" and need your 
help to do that. It makes me proud to be part of your community and collaborate 
in your project.

best regards


___
Support-list mailing list 
mailto:Support-list@support.elphel.com 
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com 










___
Support-list mailing list 
mailto:Support-list@support.elphel.com 
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

Re: [Elphel-support] about "103982"

2020-10-28 Thread ali tamimi 
Dear Andrey,

I like to complete this project (AMS sensors) , and also provided CMV8000
sensor. Can I count on your continual support?
Actually I'm a HDL developer but there are many verilog and python codes
and I'm a little confused and do not know which sections should be
changed?  My question is which part of FPGA code should be changed or
replaced ? Should Python and PHP codes be changed as well? What about Linux
kernel drivers?
We have started PCB design . Could I send the PCB file and ask for your
comments?

Ali

On Tue, Oct 27, 2020 at 5:14 PM Elphel Support <
support-list@support.elphel.com> wrote:

> Dear Ali,
>
> We developed the PCBs for CMV12000 for our customer who decided to cancel
> the project. So we have the boards built, but we never assembled and tested
> them and we haven't designed FPGA and firmware code. We may revive this
> project in the future, but our current focus is on long-range 3D with
> visible and infrared cameras, and for visible range we prefer rolling
> shutter, not the snapshot ones.
>
> Andrey
>
>
>  On Tue, 27 Oct 2020 02:15:32 -0600 *ali tamimi
> >* wrote 
>
> Dear All
> I was browsing your website that saw a long list of sensors will be
> supported in future . It is a remarkable achievement  if  all of  various
> sensors are supported in future.
> As you mentioned the "103982" board for the sensor front end CMV12000 can
> be connected to 10393. You put PCB files but don't explain about software
> requirements. Is there any special driver for it; or need code change?
> Another question, why do you not mention CMV12000 in the main list of
> supported sensors?
> I provide CMV8000 and want to drive it with your product "10393" and need
> your help to do that. It makes me proud to be part of your community and
> collaborate in your project.
> best regards
> ___
> Support-list mailing list
> Support-list@support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
>
>
>
>
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

Re: [Elphel-support] about "103982"

2020-10-27 Thread Elphel Support 
Dear Ali,



We developed the PCBs for CMV12000 for our customer who decided to cancel the 
project. So we have the boards built, but we never assembled and tested them 
and we haven't designed  FPGA and firmware code. We may revive this project in 
the future, but our current focus is on long-range 3D with visible and infrared 
cameras, and for visible range we prefer rolling shutter, not the snapshot ones.



Andrey



 On Tue, 27 Oct 2020 02:15:32 -0600 ali tamimi  
wrote 


Dear All

I was browsing your website that saw a long list of sensors will be supported 
in future . It is a remarkable achievement  if  all of  various sensors are 
supported in future. 

As you mentioned the "103982" board for the sensor front end CMV12000 can be 
connected to 10393. You put PCB files but don't explain about software 
requirements. Is there any special driver for it; or need code change? 

Another question, why do you not mention CMV12000 in the main list of supported 
sensors?

I provide CMV8000 and want to drive it with your product "10393" and need your 
help to do that. It makes me proud to be part of your community and collaborate 
in your project.

best regards


___
Support-list mailing list 
mailto:Support-list@support.elphel.com 
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com

[Elphel-support] about "103982"

2020-10-27 Thread ali tamimi 
Dear All
I was browsing your website that saw a long list of sensors will be
supported in future . It is a remarkable achievement  if  all of  various
sensors are supported in future.
As you mentioned the "103982" board for the sensor front end CMV12000 can
be connected to 10393. You put PCB files but don't explain about software
requirements. Is there any special driver for it; or need code change?
Another question, why do you not mention CMV12000 in the main list of
supported sensors?
I provide CMV8000 and want to drive it with your product "10393" and need
your help to do that. It makes me proud to be part of your community and
collaborate in your project.
best regards
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com