Re: [Elphel-support] Auto-discard notification
William, First step would be to see output on the console. It will output boot messages (similar to what GNU/Linux computer does when not in graphic screen), and end up with login/password prompt. Andrey On Thu, 05 Apr 2018 00:27:28 -0700 William Smithwrote Hi Which commands ca we use to communicate using minicom/cutecom? On Wed, Apr 4, 2018 at 4:36 PM, Andrey Filippov wrote: William, sorry for accidental blacklisting instead of whitelisting. Fixed. I use minicom, but any other terminal emulator should work too. Is there any activity on the LEDs on the network connector? Is the camera warm if you let it turned on for some time? If there is a hardware problem, you can send it to us, we'll try to fix it. Andrey >Hi Andrey >We have a 10369 Interface is there a certain software we can use to connect to serial?, its not working via putty we get no input or output from the camera >Thanks On Fri, Mar 23, 2018 at 5:15 PM, Elphel Support wrote: Hello William, Do you have 10369 (interface) board in you camera? If yes, you can use serial console and see the IP. If you know most of the IP, such as 192.168.0.??? you may try (with the camera turned on and had time to boot): ping -b 192.168.0.0 You may also try using arp ( https://wiki.elphel.com/wiki/Network_configuration#ipsetd ), "Ethernet address" is equal to camera serial number available on the camera label. It is also possible to perform network boot and/or reflash the camera firmware. Andrey On Thu, 22 Mar 2018 23:48:12 -0700 William Smith wrote To whom It may concern Good day, Its William Smith from Professional Mobile Mapping we have a NC353L, we changed the IP Address of the camera and forgot what the IP was is there a way to change the IP or reset the camera. Kind Regards William ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com -- William Smith Device Manager/ IT Technician m: +27 73 371 7657 t: +27 18 468 1170 a: 36 Radloff Street Klerksdorp www.profmap.co.za == End of Forwarded Mail == -- William Smith Device Manager/ IT Technician m: +27 73 371 7657 t: +27 18 468 1170 a: 36 Radloff Street Klerksdorp www.profmap.co.za ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Auto-discard notification
William, sorry for accidental blacklisting instead of whitelisting. Fixed. I use minicom, but any other terminal emulator should work too. Is there any activity on the LEDs on the network connector? Is the camera warm if you let it turned on for some time? If there is a hardware problem, you can send it to us, we'll try to fix it. Andrey >Hi Andrey >We have a 10369 Interface is there a certain software we can use to connect to serial?, its not working via putty we get no input or output from the camera >Thanks On Fri, Mar 23, 2018 at 5:15 PM, Elphel Supportwrote: Hello William, Do you have 10369 (interface) board in you camera? If yes, you can use serial console and see the IP. If you know most of the IP, such as 192.168.0.??? you may try (with the camera turned on and had time to boot): ping -b 192.168.0.0 You may also try using arp ( https://wiki.elphel.com/wiki/Network_configuration#ipsetd ), "Ethernet address" is equal to camera serial number available on the camera label. It is also possible to perform network boot and/or reflash the camera firmware. Andrey On Thu, 22 Mar 2018 23:48:12 -0700 William Smith wrote To whom It may concern Good day, Its William Smith from Professional Mobile Mapping we have a NC353L, we changed the IP Address of the camera and forgot what the IP was is there a way to change the IP or reset the camera. Kind Regards William ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com -- William Smith Device Manager/ IT Technician m: +27 73 371 7657 t: +27 18 468 1170 a: 36 Radloff Street Klerksdorp www.profmap.co.za == End of Forwarded Mail == ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
Re: [Elphel-support] Auto-discard notification
Marius, I'm sorry - I hit the wrong checkbox and blacklisted you instead of white-listing. Fixed. I'll reply shortly. Andrey On Fri, 30 Jun 2017 05:42:21 -0700wrote The attached message has been automatically discarded. = Forwarded message = Subject: Re: [Elphel-support] Cameras and processing modules for Self Driving Cars Vision System From: "Marius Slavescu" Date: Fri, 30 Jun 2017 08:41:58 -0400 To: "Elphel Support" - Contents - Hi Andrey, Thank you for getting back to me! I'm trying to figure out what FPGAs and components I should get to build smart cameras that supports 1-4 x 1080P 60FPS (or better) low light (2+um pixel) sensors, for open source robotics and self driving car development. I understand these solutions may not be cheap or easy to approach, I'm trying to see what can be used best and relatively future proof as starting point for open source development in this area. OSSDC being a global community driven project, I'm also looking at affordable solutions that I can promote to be used for development and testing of SDC algorithms all around the world, as OSSDC target is global full autonomy (not only applicable in certain areas). Would be great if you could give me some ideas of what configurations I should try (my budget is very limited for now), and which IPs may help get started faster. I'll post soon more details about the OSSDC platform architecture and Smart Camera, here are some things we collected, more discussions happed on OSSDC Slack (ossdc.org): https://github.com/OSSDC/OSSDC-SmartCamera/issues/1 https://medium.com/@mslavescu/what-about-putting-a-computer-vision-processor-on-the-camera-or-sensor-platform-itself-d0622b24f5c I'm also looking into HDMI capture solutions (for both cameras and gaming consoles/PCs): https://medium.com/@mslavescu/hdmi-capture-and-analysis-on-fpga-for-just-150-8b34652b0b0c https://medium.com/@mslavescu/get-ready-to-race-ai-with-us-at-ossdc-org-b741e266e362 I assume this is the 3D camera you mention, would be possible to use a different sensor to increase the frame rate and also is it possible to get uncompressed video to the PC (to do further processing on raw data using Nvidia GPUs): https://www3.elphel.com/stereo_setup Stereo (multi) camera with dense depth maps would perfect for SDC, that what I think is necessary to achieve full autonomy at relatively low cost. Thank you, Marius ___ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com