Re: flashblock for SM 2.26.1 ??
On 2015-03-31 00:14, EE wrote: Lemon Juice wrote: On 2015-03-29 21:20, EE wrote: Can you not send your patched version to Mozdev? That is where version 1.3.21 is. http://downloads.mozdev.org/flashblock/ Philip (the author) already has already made a patched version for Firefox so I don't think it makes sense for me to send it there because he already has it - I asked him to release it here: http://forums.mozillazine.org/viewtopic.php?f=48t=2916773p=14094203#p14094203 But Philip's version completely blocked Silverlight and the 360-spin Quicktime images as well. No problem for me with converted Flashblock 1.5.19a in SM 2.33.1. Silverlight plays fine. I don't have Quicktime installed but I get the message that additional plugins are necessary to display the page - which means that Quicktime is not blocked. If it was blocked then there would be just blank space and no info about missing plug-ins - that is how earlier versions of Flashblock behave in newest SM versions. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: flashblock for SM 2.26.1 ??
On 2015-03-31 00:14, EE wrote: Lemon Juice wrote: On 2015-03-29 21:20, EE wrote: Can you not send your patched version to Mozdev? That is where version 1.3.21 is. http://downloads.mozdev.org/flashblock/ Philip (the author) already has already made a patched version for Firefox so I don't think it makes sense for me to send it there because he already has it - I asked him to release it here: http://forums.mozillazine.org/viewtopic.php?f=48t=2916773p=14094203#p14094203 But Philip's version completely blocked Silverlight and the 360-spin Quicktime images as well. No problem for me with converted Flashblock 1.5.19a in SM 2.33.1. Silverlight plays fine. I don't have Quicktime installed but I get the message that additional plugins are necessary to display the page - which means that Quicktime is not blocked. If it was blocked then there would be just blank space and so info about missing plug-ins - that is how earlier versions of Flashblock behave in newest SM versions. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: flashblock for SM 2.26.1 ??
Lemon Juice wrote: On 2015-03-29 21:20, EE wrote: Can you not send your patched version to Mozdev? That is where version 1.3.21 is. http://downloads.mozdev.org/flashblock/ Philip (the author) already has already made a patched version for Firefox so I don't think it makes sense for me to send it there because he already has it - I asked him to release it here: http://forums.mozillazine.org/viewtopic.php?f=48t=2916773p=14094203#p14094203 But Philip's version completely blocked Silverlight and the 360-spin Quicktime images as well. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: flashblock for SM 2.26.1 ??
Lemon Juice wrote: On 2015-03-28 19:11, EE wrote: Paul in Houston, TX wrote: Is there a SM flash block that allows selective turn on similar to FF flashblock plugin? Which do you recommend? There is a version which had to be patched 3 times in order to work properly. https://dl.dropboxusercontent.com/u/13230070/flashblock1.3.21mod2.xpi Yeah, it's me who did the mod because Flashblock blocked too much in SM 2.31 and later: http://forums.mozillazine.org/viewtopic.php?f=40t=2896337 - however, for SM 2.26.1 the regular flashblock 1.3.21 or 1.3.20 will work. Here is the download link for 1.3.21: http://downloads.mozdev.org/flashblock/ For SM 2.31 and up there is still no official fixed flashblock so the above modded version is necessary. Alternatively, there is an updated 1.5.19a1 Firefox version, which apparently contains the necessary fixes - it should work fine in SeaMonkey after running through the converter. Can you not send your patched version to Mozdev? That is where version 1.3.21 is. http://downloads.mozdev.org/flashblock/ ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: flashblock for SM 2.26.1 ??
On 2015-03-29 21:20, EE wrote: Lemon Juice wrote: On 2015-03-28 19:11, EE wrote: Paul in Houston, TX wrote: Is there a SM flash block that allows selective turn on similar to FF flashblock plugin? Which do you recommend? There is a version which had to be patched 3 times in order to work properly. https://dl.dropboxusercontent.com/u/13230070/flashblock1.3.21mod2.xpi Yeah, it's me who did the mod because Flashblock blocked too much in SM 2.31 and later: http://forums.mozillazine.org/viewtopic.php?f=40t=2896337 - however, for SM 2.26.1 the regular flashblock 1.3.21 or 1.3.20 will work. Here is the download link for 1.3.21: http://downloads.mozdev.org/flashblock/ For SM 2.31 and up there is still no official fixed flashblock so the above modded version is necessary. Alternatively, there is an updated 1.5.19a1 Firefox version, which apparently contains the necessary fixes - it should work fine in SeaMonkey after running through the converter. Can you not send your patched version to Mozdev? That is where version 1.3.21 is. http://downloads.mozdev.org/flashblock/ Philip (the author) already has already made a patched version for Firefox so I don't think it makes sense for me to send it there because he already has it - I asked him to release it here: http://forums.mozillazine.org/viewtopic.php?f=48t=2916773p=14094203#p14094203 ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: flashblock for SM 2.26.1 ??
Paul in Houston, TX wrote: Is there a SM flash block that allows selective turn on similar to FF flashblock plugin? Which do you recommend? Thanks everyone. I have 6 or 10 different ones to try now. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: flashblock for SM 2.26.1 ??
On 2015-03-28 19:11, EE wrote: Paul in Houston, TX wrote: Is there a SM flash block that allows selective turn on similar to FF flashblock plugin? Which do you recommend? There is a version which had to be patched 3 times in order to work properly. https://dl.dropboxusercontent.com/u/13230070/flashblock1.3.21mod2.xpi Yeah, it's me who did the mod because Flashblock blocked too much in SM 2.31 and later: http://forums.mozillazine.org/viewtopic.php?f=40t=2896337 - however, for SM 2.26.1 the regular flashblock 1.3.21 or 1.3.20 will work. Here is the download link for 1.3.21: http://downloads.mozdev.org/flashblock/ For SM 2.31 and up there is still no official fixed flashblock so the above modded version is necessary. Alternatively, there is an updated 1.5.19a1 Firefox version, which apparently contains the necessary fixes - it should work fine in SeaMonkey after running through the converter. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: flashblock for SM 2.26.1 ??
Paul in Houston, TX wrote: Is there a SM flash block that allows selective turn on similar to FF flashblock plugin? Which do you recommend? There is a version which had to be patched 3 times in order to work properly. https://dl.dropboxusercontent.com/u/13230070/flashblock1.3.21mod2.xpi ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: flashblock for SM 2.26.1 ??
David E. Ross wrote: On 3/27/2015 7:06 PM, Paul in Houston, TX wrote: Is there a SM flash block that allows selective turn on similar to FF flashblock plugin? Which do you recommend? Flashblock 1.3.20 from http://flashblock.mozdev.org/installation2.html#current should work with SeaMonkey 2.26.1. Somehow, I installed a version 1.3.21. I am not sure how I got it since there is no entry for it in the Download Manager list. If you want a copy of the .xpi file of this version, let me know in this thread. I will put it on a Web site from which you can download it. Thanks David. Will give it a try. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: flashblock for SM 2.26.1 ??
On 3/27/2015 7:06 PM, Paul in Houston, TX wrote: Is there a SM flash block that allows selective turn on similar to FF flashblock plugin? Which do you recommend? Flashblock 1.3.20 from http://flashblock.mozdev.org/installation2.html#current should work with SeaMonkey 2.26.1. Somehow, I installed a version 1.3.21. I am not sure how I got it since there is no entry for it in the Download Manager list. If you want a copy of the .xpi file of this version, let me know in this thread. I will put it on a Web site from which you can download it. -- David E. Ross I am sticking with SeaMonkey 2.26.1 until saved passwords can be used when autocomplete=off. See https://bugzilla.mozilla.org/show_bug.cgi?id=433238. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On Wednesday, December 10, 2014 5:41:25 PM UTC-5, David E. Ross wrote: I have the PrefBar extension. I created my own button to toggle the HTML5 preference, which is media.autoplay.enabled. That way, HTML5 is not tied to Flash. AFAIK, this preference stopped working some time ago and Mozilla is in no hurry to fix it for some reason. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
Daniel wrote on 12/12/2014 8:27 PM: On 13/12/14 03:26, Ed Mullen wrote: Daniel wrote on 12/12/2014 7:14 AM: On 12/12/14 02:51, David E. Ross wrote: On 12/11/2014 12:30 AM, Daniel wrote: On 11/12/14 14:12, David E. Ross wrote: Snip Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. What SeaMonkey versions start with 3.nnn.?? Or do you mean SM 2.3nn, David?? No, I really meant 3.nnn. The install.rdf file for Flashblock 1.3.21 anticipates a future SeaMonkey version number beginning with 3. Note the em:maxVersion in the following fragment from that install.rdf file: !-- Seamonkey TNG -- em:targetApplication Description em:id{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}/em:id em:minVersion2.1/em:minVersion em:maxVersion3.*/em:maxVersion /Description /em:targetApplication Ahh!! So it should work for every edition up to and *excluding* ver 3.n!! That seems reasonable. Err, I think that means up to and INCLUDING ver. 3.x. So does that mean it's good up to Ver 3.99?? Yes. I thought the maxVersion was the Version at which it would stop working!! It stops working when the version exceeds what is specified. In this example, the extension would not be compatible with SM version 4.x. -- Ed Mullen http://edmullen.net/ When it rains, why don't sheep shrink? ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
Daniel wrote: On 13/12/14 03:26, Ed Mullen wrote: Daniel wrote on 12/12/2014 7:14 AM: On 12/12/14 02:51, David E. Ross wrote: On 12/11/2014 12:30 AM, Daniel wrote: On 11/12/14 14:12, David E. Ross wrote: Snip Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. What SeaMonkey versions start with 3.nnn.?? Or do you mean SM 2.3nn, David?? No, I really meant 3.nnn. The install.rdf file for Flashblock 1.3.21 anticipates a future SeaMonkey version number beginning with 3. Note the em:maxVersion in the following fragment from that install.rdf file: !-- Seamonkey TNG -- em:targetApplication Description em:id{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}/em:id em:minVersion2.1/em:minVersion em:maxVersion3.*/em:maxVersion /Description /em:targetApplication Ahh!! So it should work for every edition up to and *excluding* ver 3.n!! That seems reasonable. Err, I think that means up to and INCLUDING ver. 3.x. So does that mean it's good up to Ver 3.99?? I thought the maxVersion was the Version at which it would stop working!! The max version is the version beyond which it stops working. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 14/12/14 05:39, EE wrote: Daniel wrote: On 13/12/14 03:26, Ed Mullen wrote: Daniel wrote on 12/12/2014 7:14 AM: On 12/12/14 02:51, David E. Ross wrote: On 12/11/2014 12:30 AM, Daniel wrote: On 11/12/14 14:12, David E. Ross wrote: Snip Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. What SeaMonkey versions start with 3.nnn.?? Or do you mean SM 2.3nn, David?? No, I really meant 3.nnn. The install.rdf file for Flashblock 1.3.21 anticipates a future SeaMonkey version number beginning with 3. Note the em:maxVersion in the following fragment from that install.rdf file: !-- Seamonkey TNG -- em:targetApplication Description em:id{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}/em:id em:minVersion2.1/em:minVersion em:maxVersion3.*/em:maxVersion /Description /em:targetApplication Ahh!! So it should work for every edition up to and *excluding* ver 3.n!! That seems reasonable. Err, I think that means up to and INCLUDING ver. 3.x. So does that mean it's good up to Ver 3.99?? I thought the maxVersion was the Version at which it would stop working!! The max version is the version beyond which it stops working. Thank you both. I'll try to remember this! ;-) -- Daniel User agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:32.0) Gecko/20100101 SeaMonkey/2.29 Build identifier: 20140829003846 or User agent: Mozilla/5.0 (X11; Linux x86_64; rv:34.0) Gecko/20100101 SeaMonkey/2.31 Build identifier: 20141020202138 ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 12/12/14 02:51, David E. Ross wrote: On 12/11/2014 12:30 AM, Daniel wrote: On 11/12/14 14:12, David E. Ross wrote: On 12/10/2014 7:01 PM, Paul Bergsagel wrote: David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. If you were paying attention FlashBlock 1.3.20 does not work with SeaMonkey 2.31. So if you want to use Flashblock you have to convert Flashblock 1.5 so that it will work with Seamonkey. Plus the latest version of Flashblock IS 1.5.18! Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. What SeaMonkey versions start with 3.nnn.?? Or do you mean SM 2.3nn, David?? No, I really meant 3.nnn. The install.rdf file for Flashblock 1.3.21 anticipates a future SeaMonkey version number beginning with 3. Note the em:maxVersion in the following fragment from that install.rdf file: !-- Seamonkey TNG -- em:targetApplication Description em:id{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}/em:id em:minVersion2.1/em:minVersion em:maxVersion3.*/em:maxVersion /Description /em:targetApplication Ahh!! So it should work for every edition up to and *excluding* ver 3.n!! That seems reasonable. -- Daniel User agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:32.0) Gecko/20100101 SeaMonkey/2.29 Build identifier: 20140829003846 or User agent: Mozilla/5.0 (X11; Linux x86_64; rv:34.0) Gecko/20100101 SeaMonkey/2.31 Build identifier: 20141020202138 ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
Daniel wrote on 12/12/2014 7:14 AM: On 12/12/14 02:51, David E. Ross wrote: On 12/11/2014 12:30 AM, Daniel wrote: On 11/12/14 14:12, David E. Ross wrote: On 12/10/2014 7:01 PM, Paul Bergsagel wrote: David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. If you were paying attention FlashBlock 1.3.20 does not work with SeaMonkey 2.31. So if you want to use Flashblock you have to convert Flashblock 1.5 so that it will work with Seamonkey. Plus the latest version of Flashblock IS 1.5.18! Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. What SeaMonkey versions start with 3.nnn.?? Or do you mean SM 2.3nn, David?? No, I really meant 3.nnn. The install.rdf file for Flashblock 1.3.21 anticipates a future SeaMonkey version number beginning with 3. Note the em:maxVersion in the following fragment from that install.rdf file: !-- Seamonkey TNG -- em:targetApplication Description em:id{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}/em:id em:minVersion2.1/em:minVersion em:maxVersion3.*/em:maxVersion /Description /em:targetApplication Ahh!! So it should work for every edition up to and *excluding* ver 3.n!! That seems reasonable. Err, I think that means up to and INCLUDING ver. 3.x. -- Ed Mullen http://edmullen.net/ I'm not tense, just terribly, terribly alert. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
Ed Mullen wrote: Daniel wrote on 12/12/2014 7:14 AM: On 12/12/14 02:51, David E. Ross wrote: On 12/11/2014 12:30 AM, Daniel wrote: On 11/12/14 14:12, David E. Ross wrote: On 12/10/2014 7:01 PM, Paul Bergsagel wrote: David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. If you were paying attention FlashBlock 1.3.20 does not work with SeaMonkey 2.31. So if you want to use Flashblock you have to convert Flashblock 1.5 so that it will work with Seamonkey. Plus the latest version of Flashblock IS 1.5.18! Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. What SeaMonkey versions start with 3.nnn.?? Or do you mean SM 2.3nn, David?? No, I really meant 3.nnn. The install.rdf file for Flashblock 1.3.21 anticipates a future SeaMonkey version number beginning with 3. Note the em:maxVersion in the following fragment from that install.rdf file: !-- Seamonkey TNG -- em:targetApplication Description em:id{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}/em:id em:minVersion2.1/em:minVersion em:maxVersion3.*/em:maxVersion /Description /em:targetApplication Ahh!! So it should work for every edition up to and *excluding* ver 3.n!! That seems reasonable. Err, I think that means up to and INCLUDING ver. 3.x. [gerardjan@gershwin ~]$ fortune Nice guys finish last. -- Leo Durocher [gerardjan@gershwin ~]$ -- Vink home:http://ciudadpatricia.com User agent: Mozilla/5.0 (X11; Linux x86_64; rv:34.0) Gecko/20100101 Firefox/34.0 SeaMonkey/2.31b2 Build identifier: 20141020202138 /* * Oops. The kernel tried to access some bad page. We'll have to * terminate things with extreme prejudice. */ die_if_kernel(Oops, regs, error_code); -- From linux/arch/i386/mm/fault.c ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 13/12/14 03:26, Ed Mullen wrote: Daniel wrote on 12/12/2014 7:14 AM: On 12/12/14 02:51, David E. Ross wrote: On 12/11/2014 12:30 AM, Daniel wrote: On 11/12/14 14:12, David E. Ross wrote: Snip Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. What SeaMonkey versions start with 3.nnn.?? Or do you mean SM 2.3nn, David?? No, I really meant 3.nnn. The install.rdf file for Flashblock 1.3.21 anticipates a future SeaMonkey version number beginning with 3. Note the em:maxVersion in the following fragment from that install.rdf file: !-- Seamonkey TNG -- em:targetApplication Description em:id{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}/em:id em:minVersion2.1/em:minVersion em:maxVersion3.*/em:maxVersion /Description /em:targetApplication Ahh!! So it should work for every edition up to and *excluding* ver 3.n!! That seems reasonable. Err, I think that means up to and INCLUDING ver. 3.x. So does that mean it's good up to Ver 3.99?? I thought the maxVersion was the Version at which it would stop working!! -- Daniel User agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:32.0) Gecko/20100101 SeaMonkey/2.29 Build identifier: 20140829003846 or User agent: Mozilla/5.0 (X11; Linux x86_64; rv:34.0) Gecko/20100101 SeaMonkey/2.31 Build identifier: 20141020202138 ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 11/12/14 14:12, David E. Ross wrote: On 12/10/2014 7:01 PM, Paul Bergsagel wrote: David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. If you were paying attention FlashBlock 1.3.20 does not work with SeaMonkey 2.31. So if you want to use Flashblock you have to convert Flashblock 1.5 so that it will work with Seamonkey. Plus the latest version of Flashblock IS 1.5.18! Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. What SeaMonkey versions start with 3.nnn.?? Or do you mean SM 2.3nn, David?? -- Daniel User agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:32.0) Gecko/20100101 SeaMonkey/2.29 Build identifier: 20140829003846 or User agent: Mozilla/5.0 (X11; Linux x86_64; rv:34.0) Gecko/20100101 SeaMonkey/2.31 Build identifier: 20141020202138 ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 12/11/2014 12:30 AM, Daniel wrote: On 11/12/14 14:12, David E. Ross wrote: On 12/10/2014 7:01 PM, Paul Bergsagel wrote: David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. If you were paying attention FlashBlock 1.3.20 does not work with SeaMonkey 2.31. So if you want to use Flashblock you have to convert Flashblock 1.5 so that it will work with Seamonkey. Plus the latest version of Flashblock IS 1.5.18! Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. What SeaMonkey versions start with 3.nnn.?? Or do you mean SM 2.3nn, David?? No, I really meant 3.nnn. The install.rdf file for Flashblock 1.3.21 anticipates a future SeaMonkey version number beginning with 3. Note the em:maxVersion in the following fragment from that install.rdf file: !-- Seamonkey TNG -- em:targetApplication Description em:id{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}/em:id em:minVersion2.1/em:minVersion em:maxVersion3.*/em:maxVersion /Description /em:targetApplication -- David E. Ross I am sticking with SeaMonkey 2.26.1 until saved passwords can be used when autocomplete=off. See https://bugzilla.mozilla.org/show_bug.cgi?id=1064639. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
David E. Ross wrote: On 12/10/2014 7:01 PM, Paul Bergsagel wrote: David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. If you were paying attention FlashBlock 1.3.20 does not work with SeaMonkey 2.31. So if you want to use Flashblock you have to convert Flashblock 1.5 so that it will work with Seamonkey. Plus the latest version of Flashblock IS 1.5.18! Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. Version 1.5.18 works with SeaMonkey after being converted. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. -- David E. Ross I am sticking with SeaMonkey 2.26.1 until saved passwords can be used when autocomplete=off. See https://bugzilla.mozilla.org/show_bug.cgi?id=1064639. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 12/10/2014 8:07 AM, David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. I just noticed that Flash Block 4.20.13 for Firefox at https://addons.mozilla.org/en-US/firefox/addon/flash-block/ was actually issued two months BEFORE FlashBlock 1.3.20 for SeaMonkey and Flashblock 1.5.17 at http://flashblock.mozdev.org/. Mote that the names are slightly different. Flash Block (addons.mozilla.org) and Flashblock (mozdev.org) have different developers. -- David E. Ross I am sticking with SeaMonkey 2.26.1 until saved passwords can be used when autocomplete=off. See https://bugzilla.mozilla.org/show_bug.cgi?id=1064639. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. Does that one block HTML5 as well? That is why I got Flashblock 1.5.17. It can block HTML5, which 1.3.20 does not do. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 12/10/2014 03:18 PM, EE wrote: Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Where did you find Flashblock 1.5.18? The latest version I could find was 1.5.17. Phillip Chee reports, The SeaMonkey version is at: http://downloads.mozdev.org/flashblock/flashblock-1.3.21.xpi REF: https://groups.google.com/d/msg/mozilla.support.seamonkey/K__71VWZaCI/siFwgnFMW_UJ ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 12/10/2014 12:20 PM, EE wrote: David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. Does that one block HTML5 as well? That is why I got Flashblock 1.5.17. It can block HTML5, which 1.3.20 does not do. I have the PrefBar extension. I created my own button to toggle the HTML5 preference, which is media.autoplay.enabled. That way, HTML5 is not tied to Flash. -- David E. Ross I am sticking with SeaMonkey 2.26.1 until saved passwords can be used when autocomplete=off. See https://bugzilla.mozilla.org/show_bug.cgi?id=1064639. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. If you were paying attention FlashBlock 1.3.20 does not work with SeaMonkey 2.31. So if you want to use Flashblock you have to convert Flashblock 1.5 so that it will work with Seamonkey. Plus the latest version of Flashblock IS 1.5.18! ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock 1.5 can be made to work in SeaMonkey 2.31!
On 12/10/2014 7:01 PM, Paul Bergsagel wrote: David E. Ross wrote: On 12/9/2014 7:26 PM, Paul Bergsagel wrote: Flashblock 1.5.18 is not Compatible with SeaMonkey 2.31 nor is the older version for SeaMonkey. But it can be made compatible with a few simple steps: 1. go to the Firefox Add-Ons page for Flashblock: https://addons.mozilla.org/en-US/firefox/addon/flashblock/ 2. Copy the link to download Flashblock from the button Download Now or use the link I have provided below: https://addons.mozilla.org/firefox/downloads/latest/433/addon-433-latest.xpi?src=dp-btn-primary 3. Go to the Addonconverter page: http://addonconverter.fotokraina.com/convert.php 4. Paste the download link for Flashblock (see step 2 for the link url) into the box below this phrase: or paste direct link to xpi file or full URL of add-on page at https://addons.mozilla.org/:; 5. Click Convert at the bottom of the page and you will be prompted to install Flashblock in SeaMonkey. You can safely ignore the warnings about installing Flashblock. After SeaMonkey restarts you will once again have Flashblock up and running in SeaMonkey. I hope this helps. :) Why bother? FlashBlock 1.3.20 for SeaMonkey was released at the same time as Flashblock 1.5.17 was released for Firefox. They are both available at http://flashblock.mozdev.org/. On the other hand, FlashBlock 4.20.13 for Firefox is available at https://addons.mozilla.org/en-US/firefox/addon/flash-block/. I converted this for SeaMonkey compatibility at http://addonconverter.fotokraina.com/, but I have not yet tried installing and using it. If you were paying attention FlashBlock 1.3.20 does not work with SeaMonkey 2.31. So if you want to use Flashblock you have to convert Flashblock 1.5 so that it will work with Seamonkey. Plus the latest version of Flashblock IS 1.5.18! Flashblock 1.5.18 is for Firefox. The latest version for SeaMonkey is 1.3.21, which should be good even for SeaMonkey versions starting with 3.nnn. -- David E. Ross I am sticking with SeaMonkey 2.26.1 until saved passwords can be used when autocomplete=off. See https://bugzilla.mozilla.org/show_bug.cgi?id=1064639. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: FlashBlock GUI options not showing up in Mozilla SeaMonkey v2.0?
Ant wrote: Hello. I just installed the latest stable FlashBlock extension (v1.3.14) from http://flashblock.mozdev.org/installation2.html into my clean and new SeaMonkey (SM) v2.0 (not upgrade) in my updated Windows XP Pro. SP3. I noticed GUI options are missing in my SM's toolbar (no F icon) and in SM's Preferences. FlashBlock does work when I visit Web sites with Flash areas. I tried a new profile and with only this extension, but have the same problem. Is anyone else having the same problem or just me? Thank you in advance. :) Right click on the toolbar to which you wish to add the FlashBlock preferences button. Choose Customize, and drag the Flashblock icon to the desired location on the toolbar. Lee ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock for Seamonkey 2?
On Fri, 30 Oct 2009 01:31:44 -0400, D B Malmquist wrote: I'm looking forward to using the Seamonkey 2, and I am hoping that my favorite add-in is supported. Will FlashBlock work with Seamonkey 2? And if so, do I use Flashblock 1.5.11 (for Firefox 1.5 to 3.6a, Netscape 9 and Flock) or 1.3.14, which is stated as working with SeaMonkey, Firefox 1.0.x and other browsers? The FlashBlock page has not been updated for a while: http://flashblock.mozdev.org/ so perhaps the version recommendation is out out of date? Oops sorry for not updating my front page. Try this page: http://flashblock.mozdev.org/installation2.html#current Phil -- Philip Chee phi...@aleytys.pc.my, philip.c...@gmail.com http://flashblock.mozdev.org/ http://xsidebar.mozdev.org Guard us from the she-wolf and the wolf, and guard us from the thief, oh Night, and so be good for us to pass. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock for Seamonkey 2?
On Fri, 30 Oct 2009 06:32:19 +0100, Hartmut Figge wrote: D B Malmquist: I'm looking forward to using the Seamonkey 2, and I am hoping that my favorite add-in is supported. Will FlashBlock work with Seamonkey 2? Here are the currently used add-ons in my SM 2.1: http://www.triffids.de/pub/screenshot/ad091030.png (34 KB) But i have disabled the check for compatibilty. ;) user_pref(extensions.checkCompatibility, false); Here is mine: Last updated: Fri, 30 Oct 2009 11:07:32 GMT User Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; rv:1.9.1.5pre) Gecko/20091030 Lightning/1.0pre SeaMonkey/2.0.1pre *** Extensions (enabled: 40, disabled: 9; total: 49) Advanced Search Sidebar 0.1.8.1 [disabled] AttachmentExtractor 1.2.2 [disabled] ChatZilla 0.9.85 Clines 1.2.6 Clippings 3.0.2 [disabled] Console Filter 0.3.2 [disabled] Console² 0.5 Context Highlight 0.3.1 Context Search 0.2.4 del.icio.us Complete 1.3 DOM Inspector 2.0.4 DownloadHelper 3.4 [disabled] Execute JS 0.2.2.1 Flashblock 1.3.15a2 FolderFlags 1.0 Folderpane Tools 0.0.5.1 Forecastbar Enhanced 0.9.6 FoxyProxy 2.14 [disabled] ImportExportTools (Mboximport enhanced) 2.2 InfoLister 0.10 InspectorWidget 2.11.20090429 JavaScript Debugger 0.9.87.4 jsLib 0.1.359 LCD Clock 0.4.2 Leak Monitor 0.4.2 [disabled] Lightning 1.0pre Lightning Mods for SeaMonkey 0.1pre Link Status 1.4 LinkVisitor 3.3 Live HTTP headers 0.15 Named anchors 0.3.2 Nightly Tester Tools 2.0.2 No Squint 1.93.2.1 Nuke Anything Enhanced 1.0.2 Remove Cookie(s) for Site 0.52 ScrapBook 1.3.3.9 SeaMonkey Debug and QA UI 1.0pre Show Anchors 2.1 Stylish 1.5.9 Tabs Open Relative 0.3.3 Tag Dialog 1.0.3 TagZilla 0.066.1 text/plain 1.1.9.1 Timezone Definitions for Mozilla Calendar 1.2009l Update Channel Selector 1.0.4 View Cookies 1.9.1 Weave 0.7 [disabled] XNote 2.1.0 [disabled] xSidebar 1.1 *** Themes (2) SeaMonkey Default Theme [selected] SeaMonkey Modern *** Plugins Adobe Acrobat Authorware Web Player Java(TM) Platform SE 6 U1 Microsoft Office 2003 Microsoft® Windows Media Player Firefox Plugin Mozilla Default Plug-in QuickTime Plug-in 7.1 RealPlayer Version Plugin RealPlayer(tm) G2 LiveConnect-Enabled Plug-In (32-bit) Shockwave Flash Shockwave for Director Silverlight Plug-In Test Plug-in VLC multimedia plugin VLC Multimedia Plugin Phil -- Philip Chee phi...@aleytys.pc.my, philip.c...@gmail.com http://flashblock.mozdev.org/ http://xsidebar.mozdev.org Guard us from the she-wolf and the wolf, and guard us from the thief, oh Night, and so be good for us to pass. [ ]At a nude wedding, everyone can tell who the best man is!!! * TagZilla 0.066.6 ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock for Seamonkey 2?
Philip Chee: On Fri, 30 Oct 2009 06:32:19 +0100, Hartmut Figge wrote: Here are the currently used add-ons in my SM 2.1: http://www.triffids.de/pub/screenshot/ad091030.png (34 KB) But i have disabled the check for compatibilty. ;) user_pref(extensions.checkCompatibility, false); Here is mine: Last updated: Fri, 30 Oct 2009 11:07:32 GMT [...] Uff. If i had so much installed, my life with daily new nightlies would surely be very interesting. *g* Hartmut ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock for Seamonkey 2?
D B Malmquist: I'm looking forward to using the Seamonkey 2, and I am hoping that my favorite add-in is supported. Will FlashBlock work with Seamonkey 2? Here are the currently used add-ons in my SM 2.1: http://www.triffids.de/pub/screenshot/ad091030.png (34 KB) But i have disabled the check for compatibilty. ;) user_pref(extensions.checkCompatibility, false); Hartmut ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock for Seamonkey 2?
D B Malmquist wrote: I'm looking forward to using the Seamonkey 2, and I am hoping that my favorite add-in is supported. Will FlashBlock work with Seamonkey 2? And if so, do I use Flashblock 1.5.11 (for Firefox 1.5 to 3.6a, Netscape 9 and Flock) or 1.3.14, which is stated as working with SeaMonkey, Firefox 1.0.x and other browsers? The FlashBlock page has not been updated for a while: http://flashblock.mozdev.org/ so perhaps the version recommendation is out out of date? Thanks, -dbm Correct version should be 1.3.14. Lee ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock for Seamonkey 2?
Leonidas Jones wrote: D B Malmquist wrote: I'm looking forward to using the Seamonkey 2, and I am hoping that my favorite add-in is supported. Will FlashBlock work with Seamonkey 2? And if so, do I use Flashblock 1.5.11 (for Firefox 1.5 to 3.6a, Netscape 9 and Flock) or 1.3.14, which is stated as working with SeaMonkey, Firefox 1.0.x and other browsers? The FlashBlock page has not been updated for a while: http://flashblock.mozdev.org/ so perhaps the version recommendation is out out of date? Thanks, -dbm Correct version should be 1.3.14. Thanks, I'll give that a try. -dbm ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock
Philip Chee wrote: On Sun, 15 Feb 2009 13:54:02 -0500, Andrea wrote: I'm using SM 1.1.14 and have been using Flashblock 1.3.8. I've been having problems with it--not seeing the usual marker where flash would go, so I decided to uninstall it and then reinstall it. I installed the Mnenhy extension and then deleted Flashblock from the Chrome Manager. When I reopened SM, Flashblock was gone, but each time I try to install either 1.3.8 or 1.3.9, I get a failed message that says that there's a registry entry -239. I'm not adding a newer version because there seem to be bugs when using with SM. Any advice? For your installation problem try this set of instructions: 1. Disable (or uninstall) Mnenhy. 2. Shut down SeaMonkey. 3. Locate your SeaMonkey profile directory. This should contain a chrome subdirectory. This chrome directory should contain a overlayinfo subdirectory. Delete the overlayinfo directory and everything inside it. 4. Restart SeaMonkey and attempt to install Flashblock 1.3.8. For your first problem. This might be cause by another extension interfering with Flashblock. Try creating a new SeaMonkey profile and installing only Flashblock. And you should try our latest version 1.3.11. http://flashblock.mozdev.org/installation2.html Phil It says here to use 1.3.9. Maybe it needs to be updated? https://addons.mozilla.org/en-US/seamonkey/addon/433 Before I could install a different version of flashblock, I had to uninstall it. Having an extension that can't be easily uninstalled is really not a good idea! It took many tries to finally get rid of Mnenhy completely, which for me caused more problems than it resolved, and then I still had to uninstall flashblock. I didn't want to mess around with a new install of Mnenhy, so I opted for the double dose of the extension manager and the extension uninstaller API, which worked pretty well, although I still had to remove references of flashblock in other files to get my personal toolbar to look normal. Then In installed flashblock version 1.3.11, and everything seems to be fine for now. Thanks for your help. ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey
Re: Flashblock
On Sun, 15 Feb 2009 11:15:28 -0800, Peter Potamus the Purple Hippo wrote: why don't you ask them?: http://flashblock.mozdev.org/contact.html. They do also have their own newsgroup: public.mozdev.flashblock which is on the news.mozdev.org server. The username and password are: mozdev/maduser them is also here. You know this Peter. Phil -- Philip Chee phi...@aleytys.pc.my, philip.c...@gmail.com http://flashblock.mozdev.org/ http://xsidebar.mozdev.org Guard us from the she-wolf and the wolf, and guard us from the thief, oh Night, and so be good for us to pass. [ ]Take a bite out of crime .. Abolish the IRS! * TagZilla 0.066.6 ___ support-seamonkey mailing list support-seamonkey@lists.mozilla.org https://lists.mozilla.org/listinfo/support-seamonkey