[freenet-support] NODECO-1

2005-10-30 Thread Volodya
: 253627744 Frost: VolodyA! V [EMAIL PROTECTED] pm4pigs: VolodyA! V [EMAIL PROTECTED],5T0rxHZ7rar4uOtnHlSY5A Forum: ethical_anarhist on www.kingstonuniversity.org Please visit http://www.whengendarmesleeps.org/ When Gendarme Sleeps - Anarchy's Zine of Poetry None of us

Re: [freenet-support] Re: Help, Getting started

2005-11-10 Thread Volodya
Dont' worry about it, Data Not Found is quite a common error, and Route Not Found will go away if you run your node most of the time. Basically start up your node, let it run for a little bit, then go to the freesite you want and if you get the error, just let your browser sit on it for a

Re: [freenet-support] user dirs as unencrypted read-only data stores ?

2005-11-13 Thread Volodya
Christian Fuchs wrote: Hi all ! just subscribed... and read some of the previous threads... so I think this is the right place to post my question: If I had folders/files which I would like to make accessible via a permanent freenet node. Not by inserting, but would it be possible to tell my

Re: [freenet-support] New node, but no activity...

2005-11-13 Thread Volodya
Matt Warner wrote: I recently installed a new node, well, it has been up for exactly 1 day 13 hours 28 minutes. I would expect everything to go very slow, but not dead. I can load the front page as expected, but NOTHING else will load. I so I went on the hunt to figure out why. The computer

Re: [freenet-support] the files stored by freenet on the local disk: can I somehow view whats in them?

2005-11-19 Thread Volodya
: [EMAIL PROTECTED] ICQ: 253627744 Frost: VolodyA! V [EMAIL PROTECTED] pm4pigs: VolodyA! V [EMAIL PROTECTED],5T0rxHZ7rar4uOtnHlSY5A Forum: ethical_anarhist on www.kingstonuniversity.org Please visit http://www.whengendarmesleeps.org/ When Gendarme Sleeps - Anarchy's Zine of Poetry

Re: [freenet-support] Overloaded or Node Down

2005-11-21 Thread Volodya
Level 13 wrote: Every now and then I notice that FUQID displays the message Overloaded Or Node Down (in place where it's usually written ACTIVE). If I deactivate it, restart Freenet node, and activate Fuqid again, it works again. Normally it happens when you are using too many threads. Try to

Re: [freenet-support] Re: Overloaded or Node Down

2005-11-21 Thread Volodya
Level 13 wrote: Normally it happens when you are using too many threads. Try to use little less. I don't think I'm using too many threads. As for Freenet, I've limited the connections to 40: Connections open (Inbound/Outbound/Limit) 37 (11/26/40) Transfers active

Re: [freenet-support] Re: Where do I download?

2006-02-05 Thread Volodya
Bob wrote: [EMAIL PROTECTED] writes: I click on the download link and get a error message saying the page can't be found. Does this mean The Freenet Project failed? Umm, no ... http://freenetproject.org/index.php?page=download should work. If it doesn't it's proabably a temporary glitch,

Re: [freenet-support] no web interface?!?

2006-02-06 Thread Volodya
Hi, Evert, look for the line in your freenet.ini/.conf like that mainport.port= That is the port number for the web interface, not clientPort, which is for use of applications using FCP. Hope this solves your problem. - Volodya Evert wrote: Hi all! I don't get

Re: [freenet-support] no web interface?!?

2006-02-06 Thread Volodya
Volodya wrote: Hi, Evert, look for the line in your freenet.ini/.conf like that mainport.port= That is the port number for the web interface, not clientPort, which is for use of applications using FCP. Hope this solves your problem. - Volodya Damn, forgotten

Re: [freenet-support] 0 connections all of the sudden

2006-02-19 Thread Volodya
Volodya wrote: Starting a little past midnight today i am getting 0 connections (both incoming and outgoing). I know that my ISP was rather unhappy about freenet and was interested to know if it was possible to successfully filter out outgoing traffic. Alternatively i want to know

Re: [freenet-support] Problem using freenet

2006-03-03 Thread Volodya
Yuk Hui wrote: Hi, I tried the freenet software in your website for a whole day, but so far I can't go to any single freesite, the speed is very very slow, almost the worst p2p application I have ever used. Can you tell me how to make it better? Regards, Yuk 0a. Don't panic! 0b. Keep

Re: [freenet-support] Help It isn't working

2006-03-15 Thread Volodya
PCNM Nick wrote: Hello i have installed Freenet i updated it i got fuqid and frost and NOTHING works i cant visit any free site downloading is slow and frost gets very little messages. also i cant find anything in frost so what can i do ?? please help me It takes a little bit of

[freenet-support] London Anarchist Forum - Free Speech and Anonymity in the Technological Age - 2006Apr22

2006-03-24 Thread Volodya
Free Speech and Anonymity in the Technological Age led by VolodyA! V A 2006 April 22 - 14.30 (that's 2:30pm) Freedom Bookshop 84b Whitechapel High Street, London E1 7QX, United Kingdom (for directions can see freedompress.org.uk) Discussion about failure of technology to provide us with free

Re: [freenet-support] WOW

2006-04-07 Thread Volodya
Kenneth Vestergaard wrote: hey just wated to know it world of warcraft i affected by freenet This sentence doesn't make sense. -- Hi! I am a .SIG virus! Copy me to your SIG so that I can spread! http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast

Re: [freenet-support] What to do after switching ISP

2006-04-14 Thread Volodya
Level 13 wrote: I just switched my ISP, hence I have a new IP now. Is there any way to speed up the process of my node getting to know the others? That is, it seems like the freenet considers my node a new one (since it's on a new IP), and I'd like to inherit the credentials I had before (for

Re: [freenet-support] Re: What to do after switching ISP

2006-04-21 Thread Volodya
that time didn't mannage to catch up with the news will be affected. Of course... what do i know. - Volodya -- Hi! I am a .SIG virus! Copy me to your SIG so that I can spread! http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://www.whengendarmesleeps.org

[freenet-support] 0,5 stopped working after installing 0,7

2006-04-23 Thread Volodya
missed something very simple... q;-) - Volodya -- Hi! I am a .SIG virus! Copy me to your SIG so that I can spread! http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://www.whengendarmesleeps.org/ When Gendarme Sleeps, Anarchy's Zine of Poetry

Re: [freenet-support] 0,5 stopped working after installing 0,7

2006-04-23 Thread Volodya
Volodya wrote: Symptoms: 0. Everything worked before installing 0,7 1. FProxy,5 loads the stat pages 2. FProxy,5 gives RNF error with Attempts were made to contact 0 nodes., thus not even trying. 3. Frost,5 can download messages/files just fine. 4. Statistics show that my node does have

Re: [freenet-support] 0,5 stopped working after installing 0,7

2006-04-23 Thread Volodya
Volodya wrote: Volodya wrote: Symptoms: 0. Everything worked before installing 0,7 1. FProxy,5 loads the stat pages 2. FProxy,5 gives RNF error with Attempts were made to contact 0 nodes., thus not even trying. 3. Frost,5 can download messages/files just fine. 4. Statistics show that my node

Re: [freenet-support] Running a node again

2006-04-24 Thread Volodya
software acting up. -vinyl1 Well, i got so boring when i tried to get mine working, that people here stopped responding to me... so don't worry, i'll try to help... for karma if nothing else. q;-) - Volodya -- Hi! I am a .SIG virus! Copy me to your SIG so that I

Re: [freenet-support] Need help

2006-06-09 Thread Volodya
Tim Hawkins wrote: Sorry, if my question is pretty stupid... I´ve just started using linux and I am not a real expert of it, but I manadged to install java (I used RPM so it should have installed in corect location) and enable it to my web browser But when I start freenet, I get message that

Re: [freenet-support] Need help

2006-06-09 Thread Volodya
Tim Hawkins wrote: But how to make path variable? I installed it in usr/java/ directory... I found no instructions on where to isntall java. Should I reinstall it in other directory? Here is the easiest way to solve the problem (trust me it's the easiest way). I assume that you are using Red

Re: [freenet-support] Re: Freenet Linux Server

2006-06-10 Thread Volodya
/ phred / wrote: Thanks for the suggestions so far! A couple clarifications: I was thinking of running Ubuntu or Knoppix. I want to run Fuqid frost on the remote windows machine(s). (does that make it alot harder) I've messed around with linux a few times over the last dozen or so years, but

Re: [freenet-support] Need help

2006-06-10 Thread Volodya
Tim Hawkins wrote: Thanks, I'l try. Now I'm trying new 0.7 in windows xp and I have a problem: When I launch that installer my antivirus software (kaspersky) says that some Rootshell virus is trying to be installed. If I terminate it, freenet istalliation stops. And if I allow it, it works

Re: [freenet-support] Hello and Question about win98se

2006-06-17 Thread Volodya
Florian Hädrich wrote: Hello everybody I tried to setup freenet under Win98SE (I´d installed the newest verions of Java and Mozilla Firefox before. The following problems occurs: After the setup is finished, the browser does not open (there is only a black window like a dos window for about a

Re: [freenet-support] Help

2006-06-29 Thread Volodya
that its default is to connect to DalNet. - Volodya -- Hi! I am a .SIG virus! Copy me to your SIG so that I can spread! http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://www.whengendarmesleeps.org/ When Gendarme Sleeps, Anarchy's Zine of Poetry

Re: [freenet-support] Node does not start again when reset (Windows)

2006-07-09 Thread Volodya
to is 13767. Why does it happen? A good question. - Volodya P.S. The person i helped out also lost all the peers that an was linked to, and had to start ref exchange process all over. -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http

Re: [freenet-support] Node does not start again when reset (Windows)

2006-07-10 Thread Volodya
Ortwin Regel wrote: All my directories as well as my ini use the port number 13767. So why does the program expect the port number 61133?! I can't find it in the ini or anywhere else. On 7/9/06, * Volodya* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Ortwin Regel wrote: Does

[freenet-support] Confusion

2006-07-17 Thread Volodya
Running 882 i'm getting this problem: I've added 4 files to insert queue, for the sake of making it easy let's say they have 100, 110, 120, and 1000 blocks. When a block completes for the file with 100 Fuqid (and FProxy's queue page) show the stats for it for all 4 files, when a block

[freenet-support] Restart after 5 minutes

2006-07-25 Thread Volodya
For the past week or so i can only run Freenet for about 5 minutes at the time, i have the following happening in the logs INFO | jvm 2| 2006/07/25 18:48:47 | Starting FCP server on 0.0.0.0:9481. INFO | jvm 2| 2006/07/25 18:48:50 | Adding link: /sl/gallery/ =

Re: [freenet-support] Restart after 5 minutes

2006-07-25 Thread Volodya
Volodya wrote: For the past week or so i can only run Freenet for about 5 minutes at the time, i have the following happening in the logs INFO | jvm 2| 2006/07/25 18:48:47 | Starting FCP server on 0.0.0.0:9481. INFO | jvm 2| 2006/07/25 18:48:50 | Adding link: /sl/gallery

Re: [freenet-support] Freenet 0.7 *PLONK*

2006-09-06 Thread Volodya
is functioning (although thousands of times better than a couple of months ago) just barely. With that in mind as much time must be spent on getting things to work in darknet, if somebody wants to use their own free time to implement opennet then it should be done by them. - Volodya

Re: [freenet-support] 0.7 Censorship attack

2006-09-18 Thread Volodya
Lars Juel Nielsen wrote: On 9/11/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: This is a Type III anonymous message, sent to you by the Mixminion server at deuxpi.ca. If you do not want to receive anonymous messages, please contact [EMAIL PROTECTED] For more information about anonymity,

Re: [freenet-support] Explain how to use freenet?

2006-09-27 Thread Volodya
is *much more secure* while 2 can be done by everybody. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki None of us are free until all of us are free. ~ Mihail Bakunin

Re: [freenet-support] Explain how to use freenet?

2006-09-27 Thread Volodya
Volodya wrote: Beijert, Ellerd E (Ellerd) wrote: All, I have installed all the freenet software, but when I open the homepage I don’t get any connection because no peers are found. Could someone explain me [very easy/simple] please how to make a connection? How can I find another peer when

[freenet-support] Practical Anonymity - 2006Oct28

2006-10-01 Thread Volodya
it's a trial run). Time: 15.30 (3:30pm) Date(s): 2006Oct28 - week after London Anarchist Book Fair (2006Oct7) Place: hackLab at rampART Lead by: VolodyA! V A ( volodya -at- - - freenetproject.org ) What is hackLab: http://hacklab.org.uk/ How to get there: http://rampart.xploiting.org/wiki/doku.php

Re: [freenet-support] Re: where to get wrapper files?

2006-10-02 Thread Volodya
Nicholas Sturm wrote: Thank you for the meaningless message. I think the subject line was the message. There are no wrapper files for some operating systems (Win98-, BSD, etc). To the best of my knowledge freenet can be run without a wrapper, but it's much better to have it. --

Re: [freenet-support] Inserting a File

2006-10-15 Thread Volodya
a good idea to keep 'Compress' ticked). After the file will finish inserting (will depend on the size of the file) you can get the key from the same page. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki

Re: [freenet-support] [Tech] Windoze XP?

2006-10-29 Thread Volodya
was actually caught sending your name and address (if you entered it into registration) to MS... so you are *not* safe with it either. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki None of us are free until all

Re: [freenet-support] problems with Frost

2006-11-01 Thread Volodya
. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us are free until all of us are free.~ Mihail Bakunin

Re: [freenet-support] latest 0.7 build blows

2006-11-08 Thread Volodya
* Connected: 4 * Backed off: 1 * Disconnected: 37 * Never Connected: 31 and yes, they all have my ref. Maybe some of them dropped you? But that would mean that they wouldn't be in 'Never Connected'. -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast

Re: [freenet-support] ant build problems

2006-12-17 Thread Volodya
it was done... - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us are free until all of us are free.~ Mihail

Re: [freenet-support] HELP!!!!!

2006-12-18 Thread Volodya
the truth. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us are free until all of us are free.~ Mihail Bakunin

Re: [freenet-support] HELP!!!!!

2006-12-19 Thread Volodya
there. Hope this helps. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us are free until all of us are free

Re: [freenet-support] HELP!!!!!

2006-12-19 Thread Volodya
the truth. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us are free until all of us are free.~ Mihail

Re: [freenet-support] HELP!!!!!

2006-12-19 Thread Volodya
damian alexander wrote: well i went into mIRCwent into freenodewent into freenet-refsdidnt see 1 single person in the room . anyone you know who runs windows ? so i can get the right commands to connect run freenet corectly ? If you haven't seen anybody on #freenet-refs then you've done

Re: [freenet-support] HELP!!!!!

2006-12-20 Thread Volodya
easier to identify the person by analysing the timing of the availability of the resource). Anyhow, chose your options carefully. Free your mind and seek the truth. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info

Re: [freenet-support] HELP!!!!!

2006-12-20 Thread Volodya
were a bunch of errors? How much memory does your computer have (freenet needs quite a lot... especially after your database will start growing). - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self

Re: [freenet-support] HELP!!!!!

2006-12-20 Thread Volodya
it to. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us are free until all of us are free.~ Mihail

Re: [freenet-support] Node doesn't start anymore...java.lang.NoSuchFieldError:

2006-12-22 Thread Volodya
damian alexander wrote: im running 0.5 what was wrong with my tone ? I think the message about the tone wasn't for you, my friend. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http

Re: [freenet-support] Help

2006-12-28 Thread Volodya
to. If the filesize is somehow 0, then something was wrong with your download/install process. Try again. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston

[freenet-support] Houston, We have a problem

2007-01-21 Thread Volodya
with freenet code, but that is simply impossible. - Volodya - -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us are free

Re: [freenet-support] Houston, We have a problem

2007-01-21 Thread Volodya
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 What is your input and output rate? 1011 runs fine for me, the node finally uses the allowed output capacity: # Output Rate: 12.2 KiBps (of 14.0 KiBps) # Input Rate: 15.8 KiBps (of 56.0 KiBps) Maybe your output rate is reaching 30K/s and

Re: [freenet-support] Seed node to start with later in China

2007-02-18 Thread Volodya
The point is that there is no seednodes for DarkNet, that's exactly the point, there is no way to get the list of all the people who run freenet now. I wanted to give you a link to Freenet's wiki, but the site seems to be down again. - Volodya - -- http://freedom.libsyn.com

[freenet-support] Plugin handlePost??????

2007-03-10 Thread Volodya
what stops me from releasing the fucking freekiwiki, i can't insert the bloody edits of the articles. - Volodya (your local anarchist) - -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info

Re: [freenet-support] BitTorrent

2007-03-15 Thread Volodya
simple. - Volodya - -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us are free until all of us are free.~ Mihail Bakunin

Re: [freenet-support] BitTorrent

2007-03-16 Thread Volodya
important, but i think that what you describe is perhaps very close to Frost's insert on demand. Which at a very low cost can keep content available. - Volodya - -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence

Re: [freenet-support] Freenet over LAN

2007-03-22 Thread Volodya
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Manuel Montini wrote: Hello, I'm a newbie as for Freenet and I'd like to know if it is possible to start Freenet inside a LAN, without going out on internet. Is it possible to create a master node to start with? If yes, how can I do it?

Re: [freenet-support] Freenet over LAN

2007-03-22 Thread Volodya
a master node for starting my own freenet network? Thanks in advance Manuel I have one node that is connected only to stuff on LAN and i know that it works. Have you made sure to follow instructions on both ends of each connection? - Volodya - -- http://freedom.libsyn.com

Re: [freenet-support] A Litle Probem

2007-04-06 Thread Volodya
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Andreu Correa Casablanca wrote: Hello, I have a little problem with Freenet site... In Spain the Ya.Com ISP block the access to this page, I could access to the page through a webproxy, but I can't download the files with diferent extensions

Re: [freenet-support] running headless

2007-04-10 Thread Volodya
encrypted, so the channel must be secure enough for you. - Volodya - -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki http://www.kingstonstudents.org/ Kingston University students' forum None of us

Re: [freenet-support] Problem running Freenet

2007-04-11 Thread Volodya
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Victor Hahn wrote: no ideas...? On Monday 09 April 2007 04:12, Victor Hahn wrote: Hi, I tried installing Freenet (without the new installer) which got me the following errors: $ bin/1run.sh Enabling the auto-update feature Enabling the

Re: [freenet-support] Corrupt database after power cut

2007-04-18 Thread Volodya
to erase my database. Thanks. MrFlibble I have these all the time, with and without power cuts. Delete database-X directory and start the node... it will take a long time, but it will rebuild it. - Volodya - -- http://freedom.libsyn.com/ Voice of Freedom

Re: [freenet-support] key based routing

2007-05-18 Thread Volodya
is decremented, if it's worse it's restarted from the max (i think it's 10)... There must be more stuff going on, but i'm not quite sure what it is. - Volodya - -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info

Re: [freenet-support] Why does it take longer to start

2007-11-04 Thread Volodya
i've been seeing on my computer) isn't as bad with 0,7 as it use to be with 0,5 but i guess there's nowhere you can go to escape that. - Volodya - -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://freeselfdefence.info/ Self-defence wiki

Re: [freenet-support] Some issues and considerations

2008-01-21 Thread Volodya
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I googled a little on the subject and found below link: http://www.urban75.org/legal/rights.html http://en.wikipedia.org/wiki/Legal_rights My conclusion about secret words etc was: Be CONSTANTLY Deaf and dumb - Do Not Talk ? Other good

Re: [freenet-support] Updates

2008-01-24 Thread Volodya
of the time, for example. - Volodya - -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal None of us are free until all of us are free.~ Mihail Bakunin -BEGIN PGP SIGNATURE- Version

Re: [freenet-support] freenet/jvm priority over linux system?

2008-02-05 Thread Volodya
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Martin Nyhus wrote: On Monday 04 February 2008 14:45:31 Ermanno Baschiera wrote: IMHO that's a problem of process priority. Anybody knows how to rise the priority of freenet? (or JVM, I don't know which one) (My CPU isn't too slow for Freenet. My

Re: [freenet-support] Odd freenet.ini line

2008-02-23 Thread Volodya
that is at fault. - Volodya - -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal None of us are free until all of us are free.~ Mihail Bakunin -BEGIN PGP SIGNATURE

Re: [freenet-support] Question About Anonymity

2008-05-20 Thread Volodya
I hope this is the right forum to do this on but I'm trying to see what freenet offers in the way of privacy/anonymity. I've been exploring Tor for sometime which seems to have an incredible system of security via the circuit. The only 2 vulnerabilities that I see being: bad exit nodes

Re: [freenet-support] Frost won't start

2008-05-23 Thread Volodya
? - Volodya P.S. You can also try FMS, although i think it's not as good as Frost, but it is more resistant to DoS attacks, and most boards on Frost are currently under attack. You can get FMS at /[EMAIL PROTECTED],~BG-edFtdCC1cSH4O3BWdeIYa8Sw5DfyrSV-TKdO5ec,AQACAAE/fms/51/ -- http

Re: [freenet-support] A maximum of 40 connections on XP SP3?

2008-05-23 Thread Volodya
that an individual is a 0,5-traitor. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal None of us are free until all of us are free.~ Mihail Bakunin

Re: [freenet-support] Please somebody help. Frost won't start

2008-06-20 Thread Volodya
richard hepplewhite wrote: Hi! Could anybody explain in simple words which steps to take to start up Frost in ubuntu? So far I didn't succeed. Thanks! Richard The problem may be that Ubuntu uses GNU java, not Sun Java. You will need to do the following: in the terminal window:

Re: [freenet-support] Using Freenet for Small Sister

2008-07-07 Thread Volodya
1. Can I search the net for messages (for instance smallsis.PGPKEYID.*) so that the correct client can retrieve the messages of the network for them selves if they are new. Is this possible at all (through an index or a certain way of storing it?); All the data is being passed in the

Re: [freenet-support] Installation Woes

2008-07-15 Thread Volodya
to do sudo update-alternatives --config java and then set sun-java as the default. Hope this helps. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal None of us

Re: [freenet-support] please help me.

2008-07-28 Thread Volodya
abdussalam Mansoor wrote: Dear Sir, thank you very much for your quick replay . i traied to open the links http://127.0.0.1:/alerts/#6783657 http://127.0.0.1:/alerts/#14111765 http://127.0.0.1:/alerts/#port-forward:9977237 but all links the page cannot be displayed

Re: [freenet-support] Support Digest, Vol 35, Issue 1

2008-08-01 Thread Volodya
believe that you simply tried to do something with Freenet that it wasn't designed to do, hence it didn't work. But then what do i know, i boil the water for tea in a sauce-pot rather than in a kettle. - Volodya -- http://freedom.libsyn.com/ Voice of Freedom

Re: [freenet-support] Support Digest, Vol 35, Issue 1

2008-08-04 Thread Volodya
there, he says he uses Kubuntu. Or it can be something completely different... - Volodya -- http://freedom.libsyn.com/ Voice of Freedom, Radical Podcast http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal None of us are free until all of us are free

Re: [freenet-support] how to use the bulix pastebin as a self-service for exchanging freenet reference nodes

2008-08-06 Thread Volodya
bqz69 wrote: When you use http://dark-code.bulix.org/ to make your reference node, you see 30 links below on the same site, each containing a ref node of somebody else. When you then go to http://www.bulix.org/ you see on the left side of this page, some 26 lines down following: I'm

Re: [freenet-support] how to install freemail

2008-08-20 Thread Volodya
bqz69 wrote: Anybody know how to install freemail - I have downloaded Freemail-0.1-11.jar but get no *.jar file. Instead I get a zip file, and when I decompress it, I get no *.jar file, but 4 directories without any *.jar file? I am not a programmer, so please do not answer too short

Re: [freenet-support] how to install freemail

2008-08-21 Thread Volodya
I then went to the visit page, but I did not insert anything in the Domain line as I do not know what to insert? Anything you want. For example if you want for your mail to be [EMAIL PROTECTED] put 'TheCoolDomain' there. For more help about Freemail and other Freenet applications you

Re: [freenet-support] how to use fms - the freenet message system

2008-08-22 Thread Volodya
I have sent a message to the test board, but I only see a message from some eliza*, which says the ackbot has received my message, but my message is not on the board - what am I supposed to do to get my real message on the board (I cannot understand the peer trust/acknowledge thing)?

Re: [freenet-support] how to use fms - the freenet message system

2008-08-26 Thread Volodya
) to remember why you have set somebody the way you did. - Volodya -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal http://freenetproject.org/ The Free Network project None of us

Re: [freenet-support] running freenet on memory stick

2008-08-26 Thread Volodya
on it. - Volodya -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal http://freenetproject.org/ The Free Network project None of us are free until all of us are free.~ Mihail Bakunin

Re: [freenet-support] How to announce a freesite anonymously

2008-09-05 Thread Volodya
to the 'sites' (no quotes) board. - Volodya P.S. Unfortunately i see a lot more pro-censorship folks on 0,7 then use to be on 0,5. I don't really know how this happened, but the trend needs to be reversed. -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast

Re: [freenet-support] Support Digest, Vol 36, Issue 5

2008-09-08 Thread Volodya
I am contemplating trying out the new salted-hash datastore. I read that it requires double the amount of space as the size of datastore to do the conversion and i'm sure it will be a time-consuming event, so I will wait for a few days when I have some free time. toad did mentioned in

Re: [freenet-support] upgrading node

2008-11-03 Thread Volodya
: update.cmd (i think that's what it's called there now) On *nix you go to the directory where you have installed Freenet and type: ./update.sh - Volodya -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://eng.anarchopedia.org/ Anarchopedia

[freenet-support] ARKs USKs and SSKs (from Frost)

2008-11-14 Thread Volodya
Somebody has asked me to send this (i will post the original in Russian and then the translation done by me) (please note that i don't really think that all of this makes sense, i'm an interpreter) == Original == Использование USK для реализации ARK имеет явные недостатки. Один из них: при

Re: [freenet-support] Version 1179?

2008-11-16 Thread Volodya
[EMAIL PROTECTED] wrote: Many of my peers seem to run 1179 since this morning. I got no notice about this version via mailing list, and my node (1178) doesn't offer me this new version for update. Is something broken? update.cmd also doesn't work, see my previous mail that was completely

Re: [freenet-support] Version 1179?

2008-11-16 Thread Volodya
Volodya wrote: [EMAIL PROTECTED] wrote: Many of my peers seem to run 1179 since this morning. I got no notice about this version via mailing list, and my node (1178) doesn't offer me this new version for update. Is something broken? update.cmd also doesn't work, see my previous mail

Re: [freenet-support] Install?

2008-11-26 Thread Volodya
[EMAIL PROTECTED] wrote: Can you please send me your wrapper.log? This will be in the same directory as the node was installed to. Can't say I understand how to do this ... And are you sure that Start Freenet, Stop Freenet, Browse Freenet aren't on your start menu? Under All Programs,

Re: [freenet-support] Bug?

2008-12-07 Thread Volodya
Mel Charters wrote: Probably a bug: please report: 6 peers forcibly disconnected due to not acknowledging packets. 6 of your peers are having severe problems (not acknowledging packets even after 10 minutes). This is probably due to a bug in the code. Please report it to us at the bug

Re: [freenet-support] Bug?

2008-12-09 Thread Volodya
Matthew Toseland wrote: On Sunday 07 December 2008 14:57, Volodya wrote: Mel Charters wrote: Probably a bug: please report: 6 peers forcibly disconnected due to not acknowledging packets. 6 of your peers are having severe problems (not acknowledging packets even after 10 minutes

Re: [freenet-support] Freenet and firewall

2008-12-18 Thread Volodya
the propaganda machine?) makes no sense at all. Please reconsider your position. There was shitlist on 0,5 right before 0,7 got released. I even contributed to it by writing range thingy rather than being able to block a single ip at the time. - Volodya -- http://freedom.libsyn.com

[freenet-support] Freenet is on the surble

2009-01-01 Thread Volodya
Freenet's web url is on SURBLE black list, somebody should take a look at how to remove it. http://www.surbl.org/ -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast http://eng.anarchopedia.org/ Anarchopedia, A Free Knowledge Portal http://www.freedomporn.org/

Re: [freenet-support] Build 1263 problem? or power outage?

2010-08-05 Thread Volodya
it. - Volodya - -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast None of us are free until all of us are free.~ Mihail Bakunin -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

Re: [freenet-support] Freenet 0.7.5 build 1276 and my recent absence

2010-09-14 Thread Volodya
, do you mind introducing me to some of your friends? which may work only sometimes. - Volodya -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast None of us are free until all of us are free.~ Mihail Bakunin ___ Support

Re: [freenet-support] Straw poll: Should Freenet require Javascript?

2010-10-18 Thread Volodya
. - Volodya -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast None of us are free until all of us are free.~ Mihail Bakunin ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support

Re: [freenet-support] Straw poll: Should Freenet require Javascript?

2010-10-20 Thread Volodya
. yours A. There already is a Java based Freenet only browser. Unfortunately its development has been abandoned, and it's not very useable by now, it's shipped together with frost at the moment. - Volodya -- http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast

  1   2   3   4   >