Re: [freenet-support] connection

2010-04-02 Thread Matthew Toseland
On Tuesday 02 February 2010 20:04:08 Nico Koole wrote:
 Hi,
 
 pls can you help me:
 
 I had to re-instal Freenet but now everytime  it looses connection 
 after 5 or 10 minutes.
 Never had this problem before.

Could you give a bit more detail? Does this still happen with the current build 
(1244)? What exactly happens? Is it connected, working and able to access 
freesites initially? How many peers does it get connected to? What happens when 
it loses connection? Can you send your Statistics page (in advanced mode), both 
when it is working and when it is not working?
 
 Greetings
 Nico Koole


signature.asc
Description: This is a digitally signed message part.
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] connection assistance

2009-11-07 Thread Matthew Toseland
On Wednesday 30 September 2009 16:16:02 Jonathan Bannister wrote:
 Outstanding!  I'll give it a try.  The time spent illuminating the issue 
 with such clarity is much appreciated.

Any chance of an FAQ page or expand the relevant wiki page or page on the main 
site?
 
 Best wishes,
 
 JB
 - Original Message - 
 From: Luke771 luke771.li...@gmail.com
 To: support@freenetproject.org
 Sent: Wednesday, September 30, 2009 7:39 AM
 Subject: Re: [freenet-support] connection assistance
 
 
  Jonathan Bannister wrote:
  Thank you.  I will think about it some more.
 
  Best wishes,
 
  JB
 
  bqz69 пишет:
 
  On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote:
 
  Jonathan Bannister пишет:
 
  Thank you for this sugestion.  I have done this repeatedly, with no
  success.
 
  I note the following suggestion: it would be a good idea to forward
  the
  ports 61616 and 27307 (UDP) on your router.  How is this 
  accomplished?
 
  I am using firestarter firewall, and that's where I forward my ports (I
  am
  using ubuntu linux)
 
  The port may be blocked at any level *before* the firestarter even gets 
  a
  chance
  to see it. Think of the network connection as a water pipe, if you have
  several
  volves prior to the one at the tip of the hose closing any single one of
  them
  will block the flow of water.
 
  Router is the piece of hardware that takes the traffic it receives from
  one
  network and sends it to the different network. One of those networks 
  can
  actually be seen as the cloud of the Internet (since it is connected 
  on
  and on
  with more and more networks). At some point there is a closed port 
  before
  it
  reaches the internet.
 
  ISPs sometimes close the ports, and if you have a router in your house, 
  it
  may
  have come preconfigured to close everything unless told to do otherwise. 
  I
  honestly do not know enough at this point to help you any more... sorry.
 
- Volodya
 
   None of us are free until all of us are free.~ Mihail Bakunin
  ___
 
 
  OK, here's how you forward your ports, nice and easy:
 
 
  First, let's identify the router
  The router is a piece of hardware that looks like a relatively small
  box, it comes in various sizes but the kind used at home is generally
  half the size of a laptop (a big laptop).
 
  The router has a number of ethernet ports, the cables used to connect to
  such ports end in RJ45 connectors that look like a bigger telephone
  jack. Routers often have one or two relatively short and thick antennas,
  sometime they only have ethernet ports. The most common home routers
  have 8 ports but there are much bigger ones.
 
  Your router is placed between your PC and the 'internet outlet' in the
  wall, in the sense that the ethernet cable (internet wire) from the back
  of your computer connects to the router, and the router connects to the
  'internet outlet').
  Find the router and note its brand and model.
  If you use a wireless connection, the router will only have a cable to
  the wall outlet and not to the PC, but it can be easily identified
  anyway: it's the box that must stay turned on, or your internet dies :P
  Physically locating your router is useful if you don't have a manual.
 
 
 
  The web interface
 
  If you happen to have a manual for your router, find out how to access
  the web interface. If you don't have a manual go to the manufacturer's
  web page (hint: www.brandname.com ), look for your model and find the
  information.
  Generally, the web interface is found at the router's IP address on port
  80, that means: if your router's IP is 10.0.0.1, you will probably find
  the web interface pointing a web browser to http://10.0.0.1
 
  In some cases the web interface is on a different port rather than the
  default http port 80. If that's the case use :port# at the end of the IP
  address, example http://10.0.0.1:8800 if the port is 8800.
 
 
 
 
  Finding out your router's IP
 
  To figure out where to point your web browser, do the follwoing:
  On Windows: open a cmd shell (start  run  (type) cmd [enter] ) and
  type 'ipconfig /all' (no quotes)
  On Linux, and other *nix (probably even Mac): open a terminal and type
  'ifconfig -a'
 
  That will give you your own IP address. Your router is probably in the
  same range at -0 or -1, e.g. if your IP address is 10.0.0.137 your
  router is probably (but not always) at 10.0.0.0 or 10.0.0.1 (if this
  doesnt help, google probably will)
 
 
 
 
  Forwarding ports
 
  Web interfaces don't look all exactly the same so I can't walk you
  through the whole procedure, but with help of your manual or the
  manufacturer's website (and Google) you should be able to figure out
  what to do as long as you know exactly what you want to accomplpish,
  which in our case is:
 
  * Forward port (number/s) FROM (the router's IP) = TO (the PC's IP) for
  protocol UDP *
 
  ...which is pretty much all what

Re: [freenet-support] connection assistance

2009-09-30 Thread Luke771
Jonathan Bannister wrote:
 Thank you.  I will think about it some more.

 Best wishes,

 JB
   
 bqz69 пишет:
 
 On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote:
   
 Jonathan Bannister пишет:
 
 Thank you for this sugestion.  I have done this repeatedly, with no
 success.

 I note the following suggestion: it would be a good idea to forward 
 the
 ports 61616 and 27307 (UDP) on your router.  How is this accomplished?
   
 I am using firestarter firewall, and that's where I forward my ports (I 
 am
 using ubuntu linux)
   
 The port may be blocked at any level *before* the firestarter even gets a 
 chance
 to see it. Think of the network connection as a water pipe, if you have 
 several
 volves prior to the one at the tip of the hose closing any single one of 
 them
 will block the flow of water.

 Router is the piece of hardware that takes the traffic it receives from 
 one
 network and sends it to the different network. One of those networks can
 actually be seen as the cloud of the Internet (since it is connected on 
 and on
 with more and more networks). At some point there is a closed port before 
 it
 reaches the internet.

 ISPs sometimes close the ports, and if you have a router in your house, it 
 may
 have come preconfigured to close everything unless told to do otherwise. I
 honestly do not know enough at this point to help you any more... sorry.

   - Volodya

  None of us are free until all of us are free.~ Mihail Bakunin
 ___

 
OK, here's how you forward your ports, nice and easy:


First, let's identify the router
The router is a piece of hardware that looks like a relatively small 
box, it comes in various sizes but the kind used at home is generally 
half the size of a laptop (a big laptop).

The router has a number of ethernet ports, the cables used to connect to 
such ports end in RJ45 connectors that look like a bigger telephone 
jack. Routers often have one or two relatively short and thick antennas, 
sometime they only have ethernet ports. The most common home routers 
have 8 ports but there are much bigger ones.

Your router is placed between your PC and the 'internet outlet' in the 
wall, in the sense that the ethernet cable (internet wire) from the back 
of your computer connects to the router, and the router connects to the 
'internet outlet').
Find the router and note its brand and model.
If you use a wireless connection, the router will only have a cable to 
the wall outlet and not to the PC, but it can be easily identified 
anyway: it's the box that must stay turned on, or your internet dies :P
Physically locating your router is useful if you don't have a manual.



The web interface

If you happen to have a manual for your router, find out how to access 
the web interface. If you don't have a manual go to the manufacturer's 
web page (hint: www.brandname.com ), look for your model and find the 
information.
Generally, the web interface is found at the router's IP address on port 
80, that means: if your router's IP is 10.0.0.1, you will probably find 
the web interface pointing a web browser to http://10.0.0.1

In some cases the web interface is on a different port rather than the 
default http port 80. If that's the case use :port# at the end of the IP 
address, example http://10.0.0.1:8800 if the port is 8800.




Finding out your router's IP

To figure out where to point your web browser, do the follwoing:
On Windows: open a cmd shell (start  run  (type) cmd [enter] ) and 
type 'ipconfig /all' (no quotes)
On Linux, and other *nix (probably even Mac): open a terminal and type 
'ifconfig -a'

That will give you your own IP address. Your router is probably in the 
same range at -0 or -1, e.g. if your IP address is 10.0.0.137 your 
router is probably (but not always) at 10.0.0.0 or 10.0.0.1 (if this 
doesnt help, google probably will)




Forwarding ports

Web interfaces don't look all exactly the same so I can't walk you 
through the whole procedure, but with help of your manual or the 
manufacturer's website (and Google) you should be able to figure out 
what to do as long as you know exactly what you want to accomplpish, 
which in our case is:

* Forward port (number/s) FROM (the router's IP) = TO (the PC's IP) for 
protocol UDP *

...which is pretty much all what this quick guide boils down to.
The 'protocol UDP' thing means that you only need to select UDP and not TCP.
Hope this helps.

___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] connection assistance

2009-09-30 Thread Jonathan Bannister
Outstanding!  I'll give it a try.  The time spent illuminating the issue 
with such clarity is much appreciated.

Best wishes,

JB
- Original Message - 
From: Luke771 luke771.li...@gmail.com
To: support@freenetproject.org
Sent: Wednesday, September 30, 2009 7:39 AM
Subject: Re: [freenet-support] connection assistance


 Jonathan Bannister wrote:
 Thank you.  I will think about it some more.

 Best wishes,

 JB

 bqz69 пишет:

 On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote:

 Jonathan Bannister пишет:

 Thank you for this sugestion.  I have done this repeatedly, with no
 success.

 I note the following suggestion: it would be a good idea to forward
 the
 ports 61616 and 27307 (UDP) on your router.  How is this 
 accomplished?

 I am using firestarter firewall, and that's where I forward my ports (I
 am
 using ubuntu linux)

 The port may be blocked at any level *before* the firestarter even gets 
 a
 chance
 to see it. Think of the network connection as a water pipe, if you have
 several
 volves prior to the one at the tip of the hose closing any single one of
 them
 will block the flow of water.

 Router is the piece of hardware that takes the traffic it receives from
 one
 network and sends it to the different network. One of those networks 
 can
 actually be seen as the cloud of the Internet (since it is connected 
 on
 and on
 with more and more networks). At some point there is a closed port 
 before
 it
 reaches the internet.

 ISPs sometimes close the ports, and if you have a router in your house, 
 it
 may
 have come preconfigured to close everything unless told to do otherwise. 
 I
 honestly do not know enough at this point to help you any more... sorry.

   - Volodya

  None of us are free until all of us are free.~ Mihail Bakunin
 ___


 OK, here's how you forward your ports, nice and easy:


 First, let's identify the router
 The router is a piece of hardware that looks like a relatively small
 box, it comes in various sizes but the kind used at home is generally
 half the size of a laptop (a big laptop).

 The router has a number of ethernet ports, the cables used to connect to
 such ports end in RJ45 connectors that look like a bigger telephone
 jack. Routers often have one or two relatively short and thick antennas,
 sometime they only have ethernet ports. The most common home routers
 have 8 ports but there are much bigger ones.

 Your router is placed between your PC and the 'internet outlet' in the
 wall, in the sense that the ethernet cable (internet wire) from the back
 of your computer connects to the router, and the router connects to the
 'internet outlet').
 Find the router and note its brand and model.
 If you use a wireless connection, the router will only have a cable to
 the wall outlet and not to the PC, but it can be easily identified
 anyway: it's the box that must stay turned on, or your internet dies :P
 Physically locating your router is useful if you don't have a manual.



 The web interface

 If you happen to have a manual for your router, find out how to access
 the web interface. If you don't have a manual go to the manufacturer's
 web page (hint: www.brandname.com ), look for your model and find the
 information.
 Generally, the web interface is found at the router's IP address on port
 80, that means: if your router's IP is 10.0.0.1, you will probably find
 the web interface pointing a web browser to http://10.0.0.1

 In some cases the web interface is on a different port rather than the
 default http port 80. If that's the case use :port# at the end of the IP
 address, example http://10.0.0.1:8800 if the port is 8800.




 Finding out your router's IP

 To figure out where to point your web browser, do the follwoing:
 On Windows: open a cmd shell (start  run  (type) cmd [enter] ) and
 type 'ipconfig /all' (no quotes)
 On Linux, and other *nix (probably even Mac): open a terminal and type
 'ifconfig -a'

 That will give you your own IP address. Your router is probably in the
 same range at -0 or -1, e.g. if your IP address is 10.0.0.137 your
 router is probably (but not always) at 10.0.0.0 or 10.0.0.1 (if this
 doesnt help, google probably will)




 Forwarding ports

 Web interfaces don't look all exactly the same so I can't walk you
 through the whole procedure, but with help of your manual or the
 manufacturer's website (and Google) you should be able to figure out
 what to do as long as you know exactly what you want to accomplpish,
 which in our case is:

 * Forward port (number/s) FROM (the router's IP) = TO (the PC's IP) for
 protocol UDP *

 ...which is pretty much all what this quick guide boils down to.
 The 'protocol UDP' thing means that you only need to select UDP and not 
 TCP.
 Hope this helps.

 ___
 Support mailing list
 Support@freenetproject.org
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe

Re: [freenet-support] connection assistance

2009-09-29 Thread Jonathan Bannister
Thank you.  I will think about it some more.

Best wishes,

JB
- Original Message - 
From: VolodyA! V Anarhist volo...@whengendarmesleeps.org
To: support@freenetproject.org
Sent: Monday, September 28, 2009 10:03 PM
Subject: Re: [freenet-support] connection assistance


 bqz69 пишет:
 On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote:
 Jonathan Bannister пишет:
 Thank you for this sugestion.  I have done this repeatedly, with no
 success.

 I note the following suggestion: it would be a good idea to forward 
 the
 ports 61616 and 27307 (UDP) on your router.  How is this accomplished?
 I am using firestarter firewall, and that's where I forward my ports (I 
 am
 using ubuntu linux)

 The port may be blocked at any level *before* the firestarter even gets a 
 chance
 to see it. Think of the network connection as a water pipe, if you have 
 several
 volves prior to the one at the tip of the hose closing any single one of 
 them
 will block the flow of water.

 Router is the piece of hardware that takes the traffic it receives from 
 one
 network and sends it to the different network. One of those networks can
 actually be seen as the cloud of the Internet (since it is connected on 
 and on
 with more and more networks). At some point there is a closed port before 
 it
 reaches the internet.

 ISPs sometimes close the ports, and if you have a router in your house, it 
 may
 have come preconfigured to close everything unless told to do otherwise. I
 honestly do not know enough at this point to help you any more... sorry.

   - Volodya




 -- 
 http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
 http://www.freedomporn.org/Freedom Porn, anarchist and activist smut

  None of us are free until all of us are free.~ Mihail Bakunin
 ___
 Support mailing list
 Support@freenetproject.org
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at 
 http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:support-requ...@freenetproject.org?subject=unsubscribe 

___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] connection assistance

2009-09-28 Thread VolodyA! V Anarhist
Jonathan Bannister пишет:
 I'm having diffuclty connecting.  Can you advise?

I believe that if you go to http://www.whatismyip.com/ and put in that IP 
address that might help.

   - Volodya

 Unknown external address
 Freenet was unable to determine your external IP address (or the IP 
 address of your NAT-device or firewall). You can still exchange 
 references with other people, however this will only work if the other 
 user is not behind a NAT-device or firewall. As soon as you have 
 connected to one other user in this way, Freenet will be able to 
 determine your external IP address. You can determine your current IP 
 address and tell your node with the 'Temporary IP address hint' 
 configuration parameter http://127.0.0.1:/config/node. Also, it 
 would be a good idea to forward the ports 61616 and 27307 (UDP) on your 
 router to make it easy to connect to your node.
 
 * Temporary IP address hintTemporary hint to what our IP might be;
   deleted after us
 
 
 
 
 ___
 Support mailing list
 Support@freenetproject.org
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:support-requ...@freenetproject.org?subject=unsubscribe


-- 
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://www.freedomporn.org/Freedom Porn, anarchist and activist smut

  None of us are free until all of us are free.~ Mihail Bakunin
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] connection assistance

2009-09-28 Thread Jonathan Bannister
Thank you for this sugestion.  I have done this repeatedly, with no success.

I note the following suggestion: it would be a good idea to forward the 
ports 61616 and 27307 (UDP) on your router.  How is this accomplished?

- Original Message - 
From: VolodyA! V Anarhist volo...@whengendarmesleeps.org
To: support@freenetproject.org
Sent: Monday, September 28, 2009 12:42 PM
Subject: Re: [freenet-support] connection assistance


 Jonathan Bannister пишет:
 I'm having diffuclty connecting.  Can you advise?

 I believe that if you go to http://www.whatismyip.com/ and put in that IP
 address that might help.

   - Volodya

 Unknown external address
 Freenet was unable to determine your external IP address (or the IP
 address of your NAT-device or firewall). You can still exchange
 references with other people, however this will only work if the other
 user is not behind a NAT-device or firewall. As soon as you have
 connected to one other user in this way, Freenet will be able to
 determine your external IP address. You can determine your current IP
 address and tell your node with the 'Temporary IP address hint'
 configuration parameter http://127.0.0.1:/config/node. Also, it
 would be a good idea to forward the ports 61616 and 27307 (UDP) on your
 router to make it easy to connect to your node.

 * Temporary IP address hintTemporary hint to what our IP might be;
   deleted after us


 

 ___
 Support mailing list
 Support@freenetproject.org
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at 
 http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:support-requ...@freenetproject.org?subject=unsubscribe


 -- 
 http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
 http://www.freedomporn.org/Freedom Porn, anarchist and activist smut

  None of us are free until all of us are free.~ Mihail Bakunin
 ___
 Support mailing list
 Support@freenetproject.org
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at 
 http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:support-requ...@freenetproject.org?subject=unsubscribe 

___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] connection assistance

2009-09-28 Thread VolodyA! V Anarhist
Jonathan Bannister пишет:
 Thank you for this sugestion.  I have done this repeatedly, with no success.
 
 I note the following suggestion: it would be a good idea to forward the 
 ports 61616 and 27307 (UDP) on your router.  How is this accomplished?

That will depend on the router, and you will need to have control of it, or at 
least have the ability to explain to those in control why you need that port 
forwarded.

   - Volodya




 - Original Message - 
 From: VolodyA! V Anarhist volo...@whengendarmesleeps.org
 To: support@freenetproject.org
 Sent: Monday, September 28, 2009 12:42 PM
 Subject: Re: [freenet-support] connection assistance
 
 
 Jonathan Bannister пишет:
 I'm having diffuclty connecting.  Can you advise?
 I believe that if you go to http://www.whatismyip.com/ and put in that IP
 address that might help.

   - Volodya

 Unknown external address
 Freenet was unable to determine your external IP address (or the IP
 address of your NAT-device or firewall). You can still exchange
 references with other people, however this will only work if the other
 user is not behind a NAT-device or firewall. As soon as you have
 connected to one other user in this way, Freenet will be able to
 determine your external IP address. You can determine your current IP
 address and tell your node with the 'Temporary IP address hint'
 configuration parameter http://127.0.0.1:/config/node. Also, it
 would be a good idea to forward the ports 61616 and 27307 (UDP) on your
 router to make it easy to connect to your node.

 * Temporary IP address hintTemporary hint to what our IP might be;
   deleted after us


 

 ___
 Support mailing list
 Support@freenetproject.org
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at 
 http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

 -- 
 http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
 http://www.freedomporn.org/Freedom Porn, anarchist and activist smut

  None of us are free until all of us are free.~ Mihail Bakunin
 ___
 Support mailing list
 Support@freenetproject.org
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at 
 http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:support-requ...@freenetproject.org?subject=unsubscribe 
 
 ___
 Support mailing list
 Support@freenetproject.org
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:support-requ...@freenetproject.org?subject=unsubscribe


-- 
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://www.freedomporn.org/Freedom Porn, anarchist and activist smut

  None of us are free until all of us are free.~ Mihail Bakunin
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] connection assistance

2009-09-28 Thread bqz69
On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote:
 Jonathan Bannister пишет:
  Thank you for this sugestion.  I have done this repeatedly, with no
  success.
 
  I note the following suggestion: it would be a good idea to forward the
  ports 61616 and 27307 (UDP) on your router.  How is this accomplished?

I am using firestarter firewall, and that's where I forward my ports (I am 
using ubuntu linux)
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] connection assistance

2009-09-28 Thread VolodyA! V Anarhist
bqz69 пишет:
 On Monday 28 September 2009 21.54.52 VolodyA! V Anarhist wrote:
 Jonathan Bannister пишет:
 Thank you for this sugestion.  I have done this repeatedly, with no
 success.

 I note the following suggestion: it would be a good idea to forward the
 ports 61616 and 27307 (UDP) on your router.  How is this accomplished?
 I am using firestarter firewall, and that's where I forward my ports (I am 
 using ubuntu linux)

The port may be blocked at any level *before* the firestarter even gets a 
chance 
to see it. Think of the network connection as a water pipe, if you have several 
volves prior to the one at the tip of the hose closing any single one of them 
will block the flow of water.

Router is the piece of hardware that takes the traffic it receives from one 
network and sends it to the different network. One of those networks can 
actually be seen as the cloud of the Internet (since it is connected on and 
on 
with more and more networks). At some point there is a closed port before it 
reaches the internet.

ISPs sometimes close the ports, and if you have a router in your house, it may 
have come preconfigured to close everything unless told to do otherwise. I 
honestly do not know enough at this point to help you any more... sorry.

   - Volodya




-- 
http://freedom.libsyn.com/ Echo of Freedom, Radical Podcast
http://www.freedomporn.org/Freedom Porn, anarchist and activist smut

  None of us are free until all of us are free.~ Mihail Bakunin
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:support-requ...@freenetproject.org?subject=unsubscribe

Re: [freenet-support] Connection woes

2005-10-17 Thread Matthew Toseland
On Sun, Oct 16, 2005 at 11:04:13PM +0100, Shane Hare wrote:
 Hi,
 
  
 
 After starting freenet, I find that within a short space of time, my
 internet connection no longer works. It appears that the modem is still
 connected and able to send information, but does not appear to receive any
 information. This results in my internet connection becoming unuseable. The
 only way to reconnect is to perform a reset on the modem and re-initialise
 it. I cannot just disconnect and re-connect.
 
  
 
 I have tried changing the max number of connections as low as 10, but this
 does not improve the situation. Also, I have noticed that if I surf the www
 internet, the modem does not have any problems (even though freenet is
 connected)

Uh, so if you don't browse the WWW, freenet breaks your connection? I'm
not sure what you mean...
 
  
 
 My system is a WinXP Pro OS, Athlon XP 2000 Processor, 768Mb RAM, I have
 over 20Gb free storage. My modem is a Sagem [EMAIL PROTECTED], connected to 
 1Mb
 broadband ADSL.
 
  
 
 Any ideas would be greatly appreciated
 
  
 
 Regards
 
  
 
 Rabbit
 

 ___
 Support mailing list
 Support@freenetproject.org
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:[EMAIL PROTECTED]

-- 
Matthew J Toseland - [EMAIL PROTECTED]
Freenet Project Official Codemonkey - http://freenetproject.org/
ICTHUS - Nothing is impossible. Our Boss says so.


signature.asc
Description: Digital signature
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]

Re: [freenet-support] Connection woes

2005-10-17 Thread Volodya Mozhenkov

Shane Hare wrote:

Hi,

 

After starting freenet, I find that within a short space of time, my 
internet connection no longer works. It appears that the modem is still 
connected and able to send information, but does not appear to receive 
any information. This results in my internet connection becoming 
unuseable. The only way to reconnect is to perform a reset on the modem 
and re-initialise it. I cannot just disconnect and re-connect.


 

I have tried changing the max number of connections as low as 10, but 
this does not improve the situation. Also, I have noticed that if I surf 
the www internet, the modem does not have any problems (even though 
freenet is connected)


 

My system is a WinXP Pro OS, Athlon XP 2000 Processor, 768Mb RAM, I have 
over 20Gb free storage. My modem is a Sagem [EMAIL PROTECTED], connected to 1Mb 
broadband ADSL.


I had something simmilar before switching ISP, for me it's DNS that was going down when 
Freenet was on (or other P2P apps). To test it try and see if when you have the problem 
again you can access http://216.239.59.103/ if you can then it's dns, if not then it's 
completely different problem. (Note: sometimes after running for a long time i couldn't 
even access ip addresses directly any longer, so do it as soon as the problem begins).


--




===
Contact details:
Alt e-mail: [EMAIL PROTECTED]
ICQ: 253627744
Frost: VolodyA! V [EMAIL PROTECTED]
pm4pigs: VolodyA! V [EMAIL PROTECTED],5T0rxHZ7rar4uOtnHlSY5A
Forum: ethical_anarhist on www.kingstonuniversity.org

Please visit http://www.whengendarmesleeps.org/
   When Gendarme Sleeps - Anarchy's Zine of Poetry


None of us are free until all of us are free.
 ~ Mihail Bakunin
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]


Re: [freenet-support] Connection Issue

2005-09-19 Thread Matthew Toseland
On Sun, Sep 18, 2005 at 01:01:35AM -0700, Jake Speed wrote:
 I had been using Freenet for about a week without an
 issue. After having to restart, Freenet would just
 keep trying to connect forever without success.

Trying to connect? What do you mean? Do you have any connections (web
interface - open connections)? What happens normally, and what happens
now?
 
 I have tried re-installing to no avail.
 
 I have double checked my Firewall settings with the
 Port in the Freenet.ini file.
 
 I can't see any reason it should have stopped being
 able to connect.
 
 Jake
-- 
Matthew J Toseland - [EMAIL PROTECTED]
Freenet Project Official Codemonkey - http://freenetproject.org/
ICTHUS - Nothing is impossible. Our Boss says so.


signature.asc
Description: Digital signature
___
Support mailing list
Support@freenetproject.org
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]

Re: [freenet-support] Connection bug in recent builds

2004-07-26 Thread Toad
On Sun, Jul 25, 2004 at 12:14:41PM +0200, Marc wrote:
 Hi toad, you wrote
  Recent builds, both stable and unstable, have a bug that causes
  connections to fail with crypto related errors. This is probably not due
  to NativeBigInteger, as it happens on stable, which doesn't have NBI.
  Iakin has produced it reliably, although most nodes seem to work anyway.
  It can be reliably reproduced on a local test network. I have made some
  progress (an identity appears to be corrupted somehow), but I haven't
  finished yet. I will fix it on Monday.
 
 Do these errors include the following? This doesn't look crypto related.

It is. The other end got a crypto error.
 
 25.07.2004 11:40:14 (freenet.support.io.NIOInputStream, YThread-2822, NORMAL): 
 waited more than 12ms in NIOIS.read() tcp/connection: 
 8481127.0.0.1:36693,[EMAIL PROTECTED]:[EMAIL PROTECTED] closing
 java.lang.Exception: debug
 at freenet.support.io.NIOInputStream.read(NIOInputStream.java:302)
 at 
 freenet.interfaces.FreenetConnectionRunner.handle(FreenetConnectionRunner.java:81)
 at 
 freenet.interfaces.LocalNIOInterface$ConnectionShell.run(LocalNIOInterface.java:268)
 at freenet.thread.YThreadFactory$YThread.run(YThreadFactory.java:285)
 
 I used ethereal, but forgot to save. So from memory this is what
 happens: Frost sends a ClientHello message, but gets no answer and after
 2 minutes, fred resets the connection.

This is on FCP? Ouch. Is the node/machine overloaded (CPU-wise?)?
-- 
Matthew J Toseland - [EMAIL PROTECTED]
Freenet Project Official Codemonkey - http://freenetproject.org/
ICTHUS - Nothing is impossible. Our Boss says so.


signature.asc
Description: Digital signature
___
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]

Re: [freenet-support] Connection bug in recent builds

2004-07-25 Thread Marc
Hi toad, you wrote
 Recent builds, both stable and unstable, have a bug that causes
 connections to fail with crypto related errors. This is probably not due
 to NativeBigInteger, as it happens on stable, which doesn't have NBI.
 Iakin has produced it reliably, although most nodes seem to work anyway.
 It can be reliably reproduced on a local test network. I have made some
 progress (an identity appears to be corrupted somehow), but I haven't
 finished yet. I will fix it on Monday.

Do these errors include the following? This doesn't look crypto related.

25.07.2004 11:40:14 (freenet.support.io.NIOInputStream, YThread-2822, NORMAL): waited 
more than 12ms in NIOIS.read() tcp/connection: 8481127.0.0.1:36693,[EMAIL 
PROTECTED]:[EMAIL PROTECTED] closing
java.lang.Exception: debug
at freenet.support.io.NIOInputStream.read(NIOInputStream.java:302)
at 
freenet.interfaces.FreenetConnectionRunner.handle(FreenetConnectionRunner.java:81)
at 
freenet.interfaces.LocalNIOInterface$ConnectionShell.run(LocalNIOInterface.java:268)
at freenet.thread.YThreadFactory$YThread.run(YThreadFactory.java:285)

I used ethereal, but forgot to save. So from memory this is what
happens: Frost sends a ClientHello message, but gets no answer and after
2 minutes, fred resets the connection.

Adiaux
  Marc
___
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]


Re: [freenet-support] Connection bug in recent builds

2004-07-25 Thread Niklas Bergh
Hmm..I am not so sure about that.. I am also seeing _load_ of those messages
recently.

If there is a crypto error then the link will probably be corrupted, right?
So.. the peer cannot for sure know when it cannot expect more data to
arrive.. But.. this is just a theory.. I haven't inspected the code for the
truth.

/N
- Original Message - 
From: Marc [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, July 25, 2004 12:14 PM
Subject: Re: [freenet-support] Connection bug in recent builds


 Hi toad, you wrote
  Recent builds, both stable and unstable, have a bug that causes
  connections to fail with crypto related errors. This is probably not due
  to NativeBigInteger, as it happens on stable, which doesn't have NBI.
  Iakin has produced it reliably, although most nodes seem to work anyway.
  It can be reliably reproduced on a local test network. I have made some
  progress (an identity appears to be corrupted somehow), but I haven't
  finished yet. I will fix it on Monday.

 Do these errors include the following? This doesn't look crypto related.

 25.07.2004 11:40:14 (freenet.support.io.NIOInputStream, YThread-2822,
NORMAL): waited more than 12ms in NIOIS.read() tcp/connection:
8481127.0.0.1:36693,[EMAIL PROTECTED]:freenet.support
[EMAIL PROTECTED] closing
 java.lang.Exception: debug
 at freenet.support.io.NIOInputStream.read(NIOInputStream.java:302)
 at
freenet.interfaces.FreenetConnectionRunner.handle(FreenetConnectionRunner.ja
va:81)
 at
freenet.interfaces.LocalNIOInterface$ConnectionShell.run(LocalNIOInterface.j
ava:268)
 at
freenet.thread.YThreadFactory$YThread.run(YThreadFactory.java:285)

 I used ethereal, but forgot to save. So from memory this is what
 happens: Frost sends a ClientHello message, but gets no answer and after
 2 minutes, fred resets the connection.

 Adiaux
   Marc
 ___
 Support mailing list
 [EMAIL PROTECTED]
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at
http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:[EMAIL PROTECTED]


___
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]


Re: [freenet-support] Connection/Routing problems?

2004-07-21 Thread Zenon Panoussis
[EMAIL PROTECTED] wrote:
***A couple problems so far.. All 4 sessions, It doesn't even appear to be
able to access the default ... never-fail site.. however there is a ton
of traffic, so i KNOW its finding nodes out there.
I suspect something with your firewall. What does it block?
Can you make it log?
Z
--
Framtiden är som en babianröv, färggrann och full av skit.
 Arne Anka
___
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]


Re: [freenet-support] connection problems

2004-06-15 Thread Toad
You appear to have set outputBandwidthLimit=250. That is not a good
idea!

On Sun, Jun 13, 2004 at 11:15:26AM -0500, [EMAIL PROTECTED] wrote:
 I am having lot of trouble getting anywhere after installation. Can anyone tell me 
 what the problem is from looking at this info?
 
 Node Version  0.5
 Protocol Version  STABLE-1.50
 Build Number  5084
 CVS Revision  1.90.2.50.2.112
   
   
   
   Uptime  
   
   
 31 minutes
   
   
   Load
   
   
   
 Current routingTime   16ms
 Current messageSendTimeRequest911ms
 Pooled threads running jobs   10 (8.3%)
 Pooled threads which are idle 18
 Current upstream bandwidth usage  234 bytes/second (93.7%)
 Current estimated load for QueryReject purposes   8%
 Current estimated load for rate limiting  117.2%
 Reason for load:  Load due to thread limit = 8.3%
 Load due to routingTime = 1.6% = 16ms / 1000ms = overloadLow (100%)
 Load due to messageSendTimeRequest = 91.1% = 911ms / 1000ms = overloadLow (100%)
 Load due to output bandwidth limiting = 117.2% because outputBytes(14059)  limit 
 (12000 ) = outLimitCutoff (0.8) * outputBandwidthLimit (250) * 60
 Load due to expected inbound transfers: 0% because: 436.5417028705223 req/hr * 0.0 
 (pTransfer) * 211740.0 bytes = 0 bytes/hr expected from current requests, but 
 maxInputBytes/minute = 12000 (set input limit) * 60 * 1.1 = 792000 bytes/hr target
 Estimated external pSearchFailed (based only on QueryRejections due to load): 0.0
 Current estimated requests per hour (based on last 10 mins):  1030.5744870593196
 Current global quota (requests per hour): 37.394089166740095
 Highest seen bytes downloaded in one minute:  200614
 Current outgoing request rate 436.5417028705223
 Current probability of a request succeeding   0%
 Current target (best case single node) probability of a request succeeding8.3%
   
   
 
 ___
 Support mailing list
 [EMAIL PROTECTED]
 http://news.gmane.org/gmane.network.freenet.support
 Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
 Or mailto:[EMAIL PROTECTED]

-- 
Matthew J Toseland - [EMAIL PROTECTED]
Freenet Project Official Codemonkey - http://freenetproject.org/
ICTHUS - Nothing is impossible. Our Boss says so.


signature.asc
Description: Digital signature
___
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]

Re: [freenet-support] connection problems

2004-06-13 Thread Phillip Hutchings
On 14/06/2004, at 4:15 AM, [EMAIL PROTECTED] wrote:
I am having lot of trouble getting anywhere after installation. Can 
anyone tell me what the problem is from looking at this info?

[snip]  
Uptime  


  31 minutes
Right there. If your node's only been up for 30 minutes its unlikely to 
know enough about the network to route efficiently. After 12 hours or 
so it'll have more success.

--
Phillip Hutchings
[EMAIL PROTECTED]
http://www.sitharus.com/


smime.p7s
Description: S/MIME cryptographic signature
___
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support
Unsubscribe at http://dodo.freenetproject.org/cgi-bin/mailman/listinfo/support
Or mailto:[EMAIL PROTECTED]

Re: [freenet-support] Connection between stable and unstable network

2004-01-08 Thread Toad
On Tue, Jan 06, 2004 at 06:31:48PM +, Roger Hayter wrote:
 In message [EMAIL PROTECTED], Stephen 
 Mollett [EMAIL PROTECTED] writes
 Hi,
 
 --- Roger Hayter [EMAIL PROTECTED] wrote:
 Has anyone noticed that Frost messages in some
 popular boards seem
 almost all to be retrievable both from the stable
 and the unstable
 network? ... doesn't this suggest that some nodes
 must be
 connecting to both networks?
 
 I haven't noticed this (I've never had much luck with
 Frost) but are you using two totally separate nodes
 for browsing?
 
 Yes
 
 
 If you're just switching one node
 between the networks then, after switching, the
 datastore will still have the messages cached after
 they were retrieved on the other network.
 
 On the same topic, would it be a good idea (or indeed
 feasible) to run two nodes, one on each network, with
 the same datastore encryption key, which are
 periodically stopped and synchronised in order to
 narrow the schism between the networks and aid the
 flow of content?
 
 Regards,
 Stephen
 
 
 Perhaps people doing this is one possible explanation of my observation.

More likely is simply that we get new nodes migrating from stable to
unstable constantly, bringing their datastore with them.
 
 
 
 
 =
 
 -- 
 Roger Hayter
 ___
 Support mailing list
 [EMAIL PROTECTED]
 http://news.gmane.org/gmane.network.freenet.support

-- 
Matthew J Toseland - [EMAIL PROTECTED]
Freenet Project Official Codemonkey - http://freenetproject.org/
ICTHUS - Nothing is impossible. Our Boss says so.


signature.asc
Description: Digital signature
___
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support

Re: [freenet-support] Connection between stable and unstable network

2004-01-08 Thread Toad
On Tue, Jan 06, 2004 at 01:01:19PM +, Stephen Mollett wrote:
 Hi,
 
  --- Roger Hayter [EMAIL PROTECTED] wrote:
  Has anyone noticed that Frost messages in some
  popular boards seem 
  almost all to be retrievable both from the stable
  and the unstable 
  network? ... doesn't this suggest that some nodes
 must be
  connecting to both networks?
 
 I haven't noticed this (I've never had much luck with
 Frost) but are you using two totally separate nodes
 for browsing? If you're just switching one node
 between the networks then, after switching, the
 datastore will still have the messages cached after
 they were retrieved on the other network.
 
 On the same topic, would it be a good idea (or indeed
 feasible) to run two nodes, one on each network, with
 the same datastore encryption key, which are
 periodically stopped and synchronised in order to
 narrow the schism between the networks and aid the
 flow of content?

It would even be possible to spider the network, or scan one's store,
and then reinsert data onto a different network, without necessarily
knowing the decrypted contents or the SSK keys. However unstablenet is a
lot smaller than stablenet, so it wouldn't be very practical.
 
 Regards,
 Stephen
 
 
 =
 ==
 
 Buy a Pentium 4 (tm) for more accurate errors,
 faster crashes, brighter blue screens and
 quicker reboots!
 
 
 Yahoo! Messenger - Communicate instantly...Ping 
 your friends today! Download Messenger Now 
 http://uk.messenger.yahoo.com/download/index.html
 ___
 Support mailing list
 [EMAIL PROTECTED]
 http://news.gmane.org/gmane.network.freenet.support

-- 
Matthew J Toseland - [EMAIL PROTECTED]
Freenet Project Official Codemonkey - http://freenetproject.org/
ICTHUS - Nothing is impossible. Our Boss says so.


signature.asc
Description: Digital signature
___
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support

Re: [freenet-support] Connection between stable and unstable network

2004-01-08 Thread Toad
On Fri, Jan 09, 2004 at 01:55:15AM +, Toad wrote:
 On Tue, Jan 06, 2004 at 01:01:19PM +, Stephen Mollett wrote:
  Hi,
  
   --- Roger Hayter [EMAIL PROTECTED] wrote:
   Has anyone noticed that Frost messages in some
   popular boards seem 
   almost all to be retrievable both from the stable
   and the unstable 
   network? ... doesn't this suggest that some nodes
  must be
   connecting to both networks?
  
  I haven't noticed this (I've never had much luck with
  Frost) but are you using two totally separate nodes
  for browsing? If you're just switching one node
  between the networks then, after switching, the
  datastore will still have the messages cached after
  they were retrieved on the other network.
  
  On the same topic, would it be a good idea (or indeed
  feasible) to run two nodes, one on each network, with
  the same datastore encryption key, which are
  periodically stopped and synchronised in order to
  narrow the schism between the networks and aid the
  flow of content?
 
 It would even be possible to spider the network, or scan one's store,
 and then reinsert data onto a different network, without necessarily
 knowing the decrypted contents or the SSK keys. However unstablenet is a
 lot smaller than stablenet, so it wouldn't be very practical.

Well, it'd be possible with software support for raw inserts. Spidering
one network, downloading the raw data for each key, and then doing a raw
insert on the other network, would be quite feasible.
  
  Regards,
  Stephen
  
  
  =
  ==
  
  Buy a Pentium 4 (tm) for more accurate errors,
  faster crashes, brighter blue screens and
  quicker reboots!
  
  
  Yahoo! Messenger - Communicate instantly...Ping 
  your friends today! Download Messenger Now 
  http://uk.messenger.yahoo.com/download/index.html
  ___
  Support mailing list
  [EMAIL PROTECTED]
  http://news.gmane.org/gmane.network.freenet.support
 
 -- 
 Matthew J Toseland - [EMAIL PROTECTED]
 Freenet Project Official Codemonkey - http://freenetproject.org/
 ICTHUS - Nothing is impossible. Our Boss says so.



 ___
 Support mailing list
 [EMAIL PROTECTED]
 http://news.gmane.org/gmane.network.freenet.support

-- 
Matthew J Toseland - [EMAIL PROTECTED]
Freenet Project Official Codemonkey - http://freenetproject.org/
ICTHUS - Nothing is impossible. Our Boss says so.


signature.asc
Description: Digital signature
___
Support mailing list
[EMAIL PROTECTED]
http://news.gmane.org/gmane.network.freenet.support