I dont think precise measurements will matter to much - but should keep
speakers should be equidistant vertically (and horizontally) -the debate
would be - should you have one at ear height as that one could appear
louder than the others I would think you should have one at ear height
- so wh
Having said this we are doing a spatial audio zone in a festival this year
where we boast of "5D" audio
On 18 May 2017 at 09:58, Augustine Leudar wrote:
> Ha its you ! I think you were the person who told me about the daisy -
> chained firewire devices. Re putting the thing up - being the l
Ha its you ! I think you were the person who told me about the daisy -
chained firewire devices. Re putting the thing up - being the least DIYish
person in history I would not know other than to say have four on each
column, or even three, one at the top, one/two in the middle and one at the
bottom
wait, hold up... thank you! but
due mostly to financial circumstances & a lack of experience with anything
other than ⅛" or ¼" cables,
i am buying & daisy-chaining 6 presonus firestudio interfaces <
https://www.presonus.com/products/firestudio> (you can find for ~$150
usually) which will giv
Another reasonably priced possibility is to set up an Ethernet AVB network. For
48 speakers one could use 6 x N-DAC8s ($299 each) from miniDSP together with
two MOTU AVB switches. miniDSP have also recently come out with a PoE Ethernet
AVB capable speaker. This allows for incremental expansion o
Awesome project! Another audio interface suggestion: a TCP/IP network of
Raspberry Pis (or similar computers) with 5.1 USB modules (so one Pi
per 5.1 surround system). The Pis would be interfaced with netJACK2
with the Opus codec. Not tested...
--
Marc
On Wed, 17 May 2017 12:41:41 +0100
Augustine
An interface suggestion might be a Motu 24ao with 3 Behringer ADA8200 adats
- that will give you 48 outs for around £1000. Somebody mentioned some
daisy-chainable firewire device recently which might wook out cheaper - but
I forget the make/model.
On 17 May 2017 at 05:50, Matthew Palmer wrote
hi group,
i am looking for any advice or suggestions about low-cost materials i could
use to build the columns of this 4d sound system <
http://demonicsweaters.com/2015/03/the-amazing-4d-sound-
system-is-a-nicola-tesla-inspired-fully-immersive-audio-experience/ >
i have bought 48 logitech z506's
