Author: sbruno Date: Fri Sep 4 17:21:55 2015 New Revision: 287469 URL: https://svnweb.freebsd.org/changeset/base/287469
Log: em(4): Add Skylake/I219 support. - driver rev 7.5.2 - use new functions em_flush* for i219 devices Differential Revision: https://reviews.freebsd.org/D3163 Submitted by: erj jfv Reviewed by: jfv MFC after: 1 month Relnotes: Yes Sponsored by: Intel Corporation Modified: head/sys/dev/e1000/if_em.c head/sys/dev/e1000/if_em.h Modified: head/sys/dev/e1000/if_em.c ============================================================================== --- head/sys/dev/e1000/if_em.c Fri Sep 4 16:59:01 2015 (r287468) +++ head/sys/dev/e1000/if_em.c Fri Sep 4 17:21:55 2015 (r287469) @@ -103,7 +103,7 @@ int em_display_debug_stats = 0; /********************************************************************* * Driver version: *********************************************************************/ -char em_driver_version[] = "7.4.2"; +char em_driver_version[] = "7.5.2"; /********************************************************************* * PCI Device ID Table @@ -191,6 +191,11 @@ static em_vendor_info_t em_vendor_info_a { 0x8086, E1000_DEV_ID_PCH_I218_V2, PCI_ANY_ID, PCI_ANY_ID, 0}, { 0x8086, E1000_DEV_ID_PCH_I218_LM3, PCI_ANY_ID, PCI_ANY_ID, 0}, { 0x8086, E1000_DEV_ID_PCH_I218_V3, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_PCH_SPT_I219_LM, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_PCH_SPT_I219_V, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_PCH_SPT_I219_LM2, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_PCH_SPT_I219_V2, PCI_ANY_ID, PCI_ANY_ID, 0}, /* required last entry */ { 0, 0, 0, 0, 0} }; @@ -238,6 +243,7 @@ static void em_free_pci_resources(struct static void em_local_timer(void *); static void em_reset(struct adapter *); static int em_setup_interface(device_t, struct adapter *); +static void em_flush_desc_rings(struct adapter *); static void em_setup_transmit_structures(struct adapter *); static void em_initialize_transmit_unit(struct adapter *); @@ -584,6 +590,20 @@ em_attach(device_t dev) } /* + ** In the new SPT device flash is not a + ** separate BAR, rather it is also in BAR0, + ** so use the same tag and handle for the + ** FLASH read/write macros in the shared + ** code. + */ + if (hw->mac.type == e1000_pch_spt) { + adapter->osdep.flash_bus_space_tag = + adapter->osdep.mem_bus_space_tag; + adapter->osdep.flash_bus_space_handle = + adapter->osdep.mem_bus_space_handle; + } + + /* * Setup MSI/X or MSI if PCI Express */ adapter->msix = em_setup_msix(adapter); @@ -1168,6 +1188,7 @@ em_ioctl(if_t ifp, u_long command, caddr case e1000_ich10lan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: case e1000_82574: case e1000_82583: case e1000_80003es2lan: /* 9K Jumbo Frame size */ @@ -1369,8 +1390,15 @@ em_init_locked(struct adapter *adapter) if_clearhwassist(ifp); if (if_getcapenable(ifp) & IFCAP_TXCSUM) if_sethwassistbits(ifp, CSUM_TCP | CSUM_UDP, 0); - if (if_getcapenable(ifp) & IFCAP_TSO4) - if_sethwassistbits(ifp, CSUM_TSO, 0); + /* + ** There have proven to be problems with TSO when not + ** at full gigabit speed, so disable the assist automatically + ** when at lower speeds. -jfv + */ + if (if_getcapenable(ifp) & IFCAP_TSO4) { + if (adapter->link_speed == SPEED_1000) + if_sethwassistbits(ifp, CSUM_TSO, 0); + } /* Configure for OS presence */ em_init_manageability(adapter); @@ -2350,6 +2378,8 @@ em_update_link_status(struct adapter *ad switch (hw->phy.media_type) { case e1000_media_type_copper: if (hw->mac.get_link_status) { + if (hw->mac.type == e1000_pch_spt) + msec_delay(50); /* Do the work to read phy */ e1000_check_for_link(hw); link_check = !hw->mac.get_link_status; @@ -2441,6 +2471,10 @@ em_stop(void *arg) EM_TX_UNLOCK(txr); } + /* I219 needs some special flushing to avoid hangs */ + if (adapter->hw.mac.type == e1000_pch_spt) + em_flush_desc_rings(adapter); + e1000_reset_hw(&adapter->hw); E1000_WRITE_REG(&adapter->hw, E1000_WUC, 0); @@ -2860,6 +2894,116 @@ msi: } +/* +** The 3 following flush routines are used as a workaround in the +** I219 client parts and only for them. +** +** em_flush_tx_ring - remove all descriptors from the tx_ring +** +** We want to clear all pending descriptors from the TX ring. +** zeroing happens when the HW reads the regs. We assign the ring itself as +** the data of the next descriptor. We don't care about the data we are about +** to reset the HW. +*/ +static void +em_flush_tx_ring(struct adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct tx_ring *txr = adapter->tx_rings; + struct e1000_tx_desc *txd; + u32 tctl, txd_lower = E1000_TXD_CMD_IFCS; + u16 size = 512; + + tctl = E1000_READ_REG(hw, E1000_TCTL); + E1000_WRITE_REG(hw, E1000_TCTL, tctl | E1000_TCTL_EN); + + txd = &txr->tx_base[txr->next_avail_desc++]; + if (txr->next_avail_desc == adapter->num_tx_desc) + txr->next_avail_desc = 0; + + /* Just use the ring as a dummy buffer addr */ + txd->buffer_addr = txr->txdma.dma_paddr; + txd->lower.data = htole32(txd_lower | size); + txd->upper.data = 0; + + /* flush descriptors to memory before notifying the HW */ + wmb(); + + E1000_WRITE_REG(hw, E1000_TDT(0), txr->next_avail_desc); + mb(); + usec_delay(250); +} + +/* +** em_flush_rx_ring - remove all descriptors from the rx_ring +** +** Mark all descriptors in the RX ring as consumed and disable the rx ring +*/ +static void +em_flush_rx_ring(struct adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl, rxdctl; + + rctl = E1000_READ_REG(hw, E1000_RCTL); + E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN); + E1000_WRITE_FLUSH(hw); + usec_delay(150); + + rxdctl = E1000_READ_REG(hw, E1000_RXDCTL(0)); + /* zero the lower 14 bits (prefetch and host thresholds) */ + rxdctl &= 0xffffc000; + /* + * update thresholds: prefetch threshold to 31, host threshold to 1 + * and make sure the granularity is "descriptors" and not "cache lines" + */ + rxdctl |= (0x1F | (1 << 8) | E1000_RXDCTL_THRESH_UNIT_DESC); + E1000_WRITE_REG(hw, E1000_RXDCTL(0), rxdctl); + + /* momentarily enable the RX ring for the changes to take effect */ + E1000_WRITE_REG(hw, E1000_RCTL, rctl | E1000_RCTL_EN); + E1000_WRITE_FLUSH(hw); + usec_delay(150); + E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN); +} + +/* +** em_flush_desc_rings - remove all descriptors from the descriptor rings +** +** In i219, the descriptor rings must be emptied before resetting the HW +** or before changing the device state to D3 during runtime (runtime PM). +** +** Failure to do this will cause the HW to enter a unit hang state which can +** only be released by PCI reset on the device +** +*/ +static void +em_flush_desc_rings(struct adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + device_t dev = adapter->dev; + u16 hang_state; + u32 fext_nvm11, tdlen; + + /* First, disable MULR fix in FEXTNVM11 */ + fext_nvm11 = E1000_READ_REG(hw, E1000_FEXTNVM11); + fext_nvm11 |= E1000_FEXTNVM11_DISABLE_MULR_FIX; + E1000_WRITE_REG(hw, E1000_FEXTNVM11, fext_nvm11); + + /* do nothing if we're not in faulty state, or if the queue is empty */ + tdlen = E1000_READ_REG(hw, E1000_TDLEN(0)); + hang_state = pci_read_config(dev, PCICFG_DESC_RING_STATUS, 2); + if (!(hang_state & FLUSH_DESC_REQUIRED) || !tdlen) + return; + em_flush_tx_ring(adapter); + + /* recheck, maybe the fault is caused by the rx ring */ + hang_state = pci_read_config(dev, PCICFG_DESC_RING_STATUS, 2); + if (hang_state & FLUSH_DESC_REQUIRED) + em_flush_rx_ring(adapter); +} + + /********************************************************************* * * Initialize the hardware to a configuration @@ -2921,6 +3065,7 @@ em_reset(struct adapter *adapter) case e1000_pchlan: case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: pba = E1000_PBA_26K; break; default: @@ -2979,6 +3124,7 @@ em_reset(struct adapter *adapter) break; case e1000_pch2lan: case e1000_pch_lpt: + case e1000_pch_spt: hw->fc.high_water = 0x5C20; hw->fc.low_water = 0x5048; hw->fc.pause_time = 0x0650; @@ -3003,6 +3149,10 @@ em_reset(struct adapter *adapter) break; } + /* I219 needs some special flushing to avoid hangs */ + if (hw->mac.type == e1000_pch_spt) + em_flush_desc_rings(adapter); + /* Issue a global reset */ e1000_reset_hw(hw); E1000_WRITE_REG(hw, E1000_WUC, 0); @@ -3599,6 +3749,15 @@ em_initialize_transmit_unit(struct adapt /* This write will effectively turn on the transmit unit. */ E1000_WRITE_REG(&adapter->hw, E1000_TCTL, tctl); + if (hw->mac.type == e1000_pch_spt) { + u32 reg; + reg = E1000_READ_REG(hw, E1000_IOSFPC); + reg |= E1000_RCTL_RDMTS_HEX; + E1000_WRITE_REG(hw, E1000_IOSFPC, reg); + reg = E1000_READ_REG(hw, E1000_TARC(0)); + reg |= E1000_TARC0_CB_MULTIQ_3_REQ; + E1000_WRITE_REG(hw, E1000_TARC(0), reg); + } } Modified: head/sys/dev/e1000/if_em.h ============================================================================== --- head/sys/dev/e1000/if_em.h Fri Sep 4 16:59:01 2015 (r287468) +++ head/sys/dev/e1000/if_em.h Fri Sep 4 17:21:55 2015 (r287469) @@ -218,6 +218,9 @@ #define EM_TX_HUNG 0x80000000 #define EM_TX_MAXTRIES 10 +#define PCICFG_DESC_RING_STATUS 0xe4 +#define FLUSH_DESC_REQUIRED 0x100 + /* * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will _______________________________________________ svn-src-all@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
