Hi Chris, Hi all,
Q-in-Q / L2Tunnel and 802.1ad with LACP works with Cisco switches without
any problem.
On ME switch and I tested it with small low-cost 3560G, it works too.
Here's an example:
Hi all,
http://www.swisscom.com/brand-2008/
Cheers,
Jerome
___
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
Anybody from Fibrlac on the list ?
Please contact me offlist ASAP.
Thanks,
Jerome Tissieres
IP Network Engineer
VTX SERVICES SA
Une société du groupe VTX-Telecom
http://www.vtx.ch
Av. de Lavaux 101 - CH-1009 Pully
Hi Sven, Hi all,
VTX already have ULL in Geneva, Lausanne, Sion, Basel and Zurich.
The list is growing day after day.
http://www.vtx.ch
Rgds,
Jerome
De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de
Sven-Eric Endruscheit
Dear Daniel, and all,
Yes, I confirm if you order a /30, /29, /28, etc to VTX, the first IP of the
subnet is assigned to the CPE with the right mask associated.
This setup works on Cisco and Zyxel ADSL as the WAN interface is using
the IP from the LAN side and the LNS sees both a /32 and a
First usable, 01.
Cu,
Jerome
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Daniel
Roethlisberger
Envoyé : lundi, 4. juin 2007 13:54
À : [EMAIL PROTECTED]
Objet : Re: [swinog] vtx ADSL /30 subnet practice
Jérôme Tissières [EMAIL PROTECTED
From here it works (Level3 @ Zurich link)
1 ge-4-1.hsa1.Zurich1.Level3.net (213.242.67.41) [AS 3356] 0 msec 0 msec 4
msec
2 so-5-0-0.mpls2.Zurich1.Level3.net (4.68.115.93) [AS 3356] 0 msec 0 msec 0
msec
3 ae-0-0.bbr2.SanJose1.Level3.net (64.159.1.130) [AS 3356] 176 msec 172 msec
172
Jérôme Tissières wrote:
Maybe the solution is to limit to two or three persons per
company ? I
count 9 guys from one company, 6 from another, etc...
yeah, of which two thirds won't show up like the last time,
and the one before, and the one before that one...
--
Andre
Hi all,
It seems the CERN have (again) a power outage, but not all is down.
The hotline is not reachable... anybody have more infos ?
Thanks,
Jerome
___
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
.
That's all that I know (not directly from CERN-mouth).
Guillaume
-Message d'origine-
De : [EMAIL PROTECTED] [mailto:swinog-
[EMAIL PROTECTED] De la part de Jérôme Tissières Envoyé :
mardi, 16. mai 2006 14:18 À : swinog@swinog.ch Objet :
[swinog] Power
outage in CERN
Hi
It seems the PA-Jacket-card support only some PA but not all and not PA-GE :-/
Another funny thing i've read on the Cisco doc ;
NPE-G1 SDRAM memory module is not compatible with the NPE-G2 memory module
On the NPE-G2 there's only one memory slot and it's not the same type of memory.
Cheers,
Hi all,
First, my mail was sent four weeks ago :)
2nd, Frederic you send your mails to the whole list :))
Cheers,
Jerome
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Frédéric Jutzet
Envoyé : mercredi, 8. février 2006 10:53
À :
Hi everybody,
I seems Level3 network is down in Zurich and Geneva.
I try to contact Level3 NOC without success...
Anybody have more infos ?
Cu,
Jerome
___
swinog mailing list
swinog@lists.swinog.ch
] Level3 down in Switzerland
One of the services we have through Level3 (in Germany) just
came back up a few minutes ago.
Let's hope they have things under control again. Haven't got
any real feedback from them yet
...mike
Jérôme Tissières wrote:
Ok I diden't read Nanog before my post
I agree with Gunther, for me Rittal is the best.
http://www.rittal.ch/
Jerome
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] De la part de Gunther
Stammwitz
Envoyé : mercredi, 31. août 2005 15:35
À : swinog@swinog.ch
Objet : AW: [swinog] manufacturer for
I confirm,
ADSL national outage ;
---snip---
[To:] ISP
[Trouble Ticket Number:]
[Outage ID - Message ID:] 3373 - 00
[From:] BBCS Support Team
Network-Outage BBCS/ADSL
[Region:] NA
[Affected Locations:] National
[Begin of fault:][Date:] 15.07.2005 [Time:] 09:06
[End of
16 matches
Mail list logo