Re: [swinog] Yet another "need hardware now" - 100mbit SFP

[Silvan Gebhardt]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

We run BIDI SFP on all the 100mbit ports.

They are all the same switches, M3400
We have "end user" CPE that complete the 1410/1390nm BIDI 100baseBX

But I have some local stuff that goes only 10 rack units in the same
room, and I would prefer not to have to install a CPE to cross 50 CM
but rather use an SX Fibre instead (the SX SFP on the other end is
already there, currently to a (to be replaced) Alcatel switch


Does this help a bit?


This is a FTTH installation with some local stuff in the Central
office. I prefer to have it with as few hops as possible.

LG
Silvan

Am 22.11.2012 16:04, schrieb vwat...@dancendrumarts.com:
> Silvan:
> 
> Well, you said you had the all SFP switch with the 2 gig uplinks 
> completing the ring of 5 switches and having only 24 Fast Ethernet
> ports with SFP capability availablehow were you intending to
> use these ports ? Why do you say your cpe devices are not
> appropriate? Also are the ring of switches all the same make/model?
> What are the 24 100mbit ports on that last switch NOT doing? Please
> bring some more details of your plan if you would. Are all switches
> running same config and IOS verson and feature set?
> 
> Regards,
> 
> Vinnie
> 
> 
> -Original Message- *From:* Silvan Gebhardt
> [mailto:gebha...@openfactory.ch] *Sent:* Thursday, November 22,
> 2012 02:37 PM *To:* vwat...@dancendrumarts.com *Cc:*
> swi...@swinog.ch, 'Frederic Gargula' *Subject:* Re: [swinog] Yet
> another "need hardware now" - 100mbit SFP
> 
> -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 so basically what I
> have is the all SFP Switch, with 24 Fibre Ports on FastEthernet and
> 2 Gigabit Ports. Gigabit is all taken since we have 5 switches in a
> ring. Therefore I have some situation where my CPE is not
> appropriate and I wanted to use SX or LX fibre there. 1000BASE TX
> do not work. Best Silvan Am 22.11.2012 13:08, schrieb
> vwat...@dancendrumarts.com: > Frederic: > > You are quite right, I
> stand corrected! The 3400g-2cs has only two > 10/100/1000 ports and
> the 3400g-12cs has 12 such ports. My main > point was that these
> switches support SFP on other than uplink > ports and the me
> 3400-24ts does not. Thanks for the correction. > Best Regards, > > 
> Vinnie > > > -Original Message- *From:* Frederic Gargula > 
> [mailto:frederic.garg...@ip-max.net] *Sent:* Thursday, November 22,
> > 2012 12:03 PM *To:* vwat...@dancendrumarts.com *Cc:* 'Silvan > 
> Gebhardt', swi...@swinog.ch *Subject:* Re: [swinog] Yet another >
> "need hardware now" - 100mbit SFP > > Hello, ME 3400G-2CS has only
> 2 10/100/1000 ports. Best regards, > Frederic Gargula IP-Max On Nov
> 22, 2012, at 11:58 AM, > vwat...@dancendrumarts.com wrote: > Hi
> Silvan: > > Hope you are > doing well. It looks like there is only
> one model of these switches > that supports SFP on the 100mbit
> ports. That model is ME 3400-24FS. > It supports SFP on the 100mbit
> ports and on the 2 gbit uplink > ports. > > The other switch from
> this platform that has only > 10/100mbit ports (ME 3400-24TS) only
> supports SFP on the 2 gigabit > uplink ports. > > The remainder of
> the switches in this series: >>> ME 3400G-12CS > ME 3400G-2CS > >
> Both have 24 10/100/1000 Dual > purpose ports that support SFP and
> RJ45. I hope this helps. Best > Regards, > > Vinniw Watson > > >
> -Original Message- > > From: Silvan Gebhardt 
> [mailto:gebha...@openfactory.ch] > Sent: > Thursday, November 22,
> 2012 10:54 AM > To: swi...@swinog.ch > > Subject: [swinog] Yet
> another "need hardware now" - 100mbit SFP > > > -BEGIN PGP
> SIGNED MESSAGE- Hash: SHA1 Hi Folks, I have an > ME3400. I need
> SFP that work on the 100mbit ports, I need 1x LX 2x > SX OR: 3x
> 100mbit Copper please note, the fastethernet ports on > this switch
> do not accept the 100BASE-SX or LX from cisco at all. > anyone that
> can help me out with SFP that work in that cisco switch > please
> contact me offlist with a good offer. Best Silvan -BEGIN > PGP
> SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: > Using
> GnuPG with undefined - http://www.enigmail.net/ > 
> iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo > 
> x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -END PGP SIGNATURE-
> > > ___ > swinog
> mailing > list
>> swinog@lists.swinog.ch > >
> http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog -BEGIN
> PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment:
> Using GnuPG with undefined - http://www.enigmail.net/ 
> iEYEARECAAYFAlCuKqwACgkQC82WwYR1u2ockwCfbeUrmdfFo6wOJwtyF5PrbaKJ 
> eZQAn3ikeZemYNxxkonnAe/+bdvgHGzs =gXFz -END PGP SIGNATURE-
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with undefined - http://www.enigmail.net/

iEYEARECAAYFAlCuQv0ACgkQC82WwYR1u2rR7QCgjjHg5Z0GPEkJ64cmhjQGUf9b
PTwAoIw/7z9MSmkZdeuRXtZyc+f8w9aH
=Hy7y
-END PGP SIGNATURE-



sm

Re: [swinog] Yet another "need hardware now" - 100mbit SFP

[vwatson]

 Silvan:


Well, you said you had the all SFP switch with the 2 gig uplinks completing the 
ring of 5 switches and having only 24 Fast Ethernet ports with SFP capability 
availablehow were you intending to use these ports ? Why do you say your 
cpe devices are not appropriate? Also are the ring of switches all the same 
make/model? What are the 24 100mbit ports on that last switch NOT doing? Please 
bring some more details of your plan if you would. Are all switches running 
same config and IOS verson and feature set?


Regards,


Vinnie




-Original Message-
From: Silvan Gebhardt [mailto:gebha...@openfactory.ch]
Sent: Thursday, November 22, 2012 02:37 PM
To: vwat...@dancendrumarts.com
Cc: swi...@swinog.ch, 'Frederic Gargula'
Subject: Re: [swinog] Yet another "need hardware now" - 100mbit SFP

-BEGIN PGP SIGNED MESSAGE-Hash: SHA1so basically what I have is the all 
SFP Switch, with 24 Fibre Ports onFastEthernet and 2 Gigabit Ports. Gigabit is 
all taken since we have 5switches in a ring.Therefore I have some situation 
where my CPE is not appropriate and Iwanted to use SX or LX fibre there. 
1000BASE TX do not work.BestSilvanAm 22.11.2012 13:08, schrieb 
vwat...@dancendrumarts.com:> Frederic:> > You are quite right, I stand 
corrected! The 3400g-2cs has only two > 10/100/1000 ports and the 3400g-12cs 
has 12 such ports. My main> point was that these switches support SFP on other 
than uplink> ports and the me 3400-24ts does not. Thanks for the correction.> 
Best Regards,> > Vinnie> > > -Original Message- *From:* Frederic 
Gargula> [mailto:frederic.garg...@ip-max.net] *Sent:* Thursday, November 22,> 
2012 12:03 PM *To:* vwat...@dancendrumarts.com *Cc:* 'Silvan> Gebhardt', 
swi...@swinog.ch *Subject:* Re: [swinog] Yet another> "need hardware now" - 
100mbit SFP> > Hello, ME 3400G-2CS has only 2 10/100/1000 ports. Best regards,> 
Frederic Gargula IP-Max On Nov 22, 2012, at 11:58 AM,> 
vwat...@dancendrumarts.com wrote: > Hi Silvan: > > Hope you are> doing well. It 
looks like there is only one model of these switches> that supports SFP on the 
100mbit ports. That model is ME 3400-24FS.> It supports SFP on the 100mbit 
ports and on the 2 gbit uplink> ports. > > The other switch from this platform 
that has only> 10/100mbit ports (ME 3400-24TS) only supports SFP on the 2 
gigabit> uplink ports. > > The remainder of the switches in this series:>>> ME 
3400G-12CS > ME 3400G-2CS > > Both have 24 10/100/1000 Dual> purpose ports that 
support SFP and RJ45. I hope this helps. Best > Regards, > > Vinniw Watson > > 
> -Original Message- >> From: Silvan Gebhardt 
[mailto:gebha...@openfactory.ch] > Sent:> Thursday, November 22, 2012 10:54 AM 
> To: swi...@swinog.ch >> Subject: [swinog] Yet another "need hardware now" - 
100mbit SFP > >> -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Folks, I have 
an> ME3400. I need SFP that work on the 100mbit ports, I need 1x LX 2x> SX OR: 
3x 100mbit Copper please note, the fastethernet ports on> this switch do not 
accept the 100BASE-SX or LX from cisco at all.> anyone that can help me out 
with SFP that work in that cisco switch> please contact me offlist with a good 
offer. Best Silvan -BEGIN> PGP SIGNATURE- Version: GnuPG v1.4.11 
(GNU/Linux) Comment:> Using GnuPG with undefined - http://www.enigmail.net/ > 
iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo > 
x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -END PGP SIGNATURE-> > 
___ > swinog mailing> list > 
swinog@lists.swinog.ch > > 
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog-BEGIN PGP 
SIGNATURE-Version: GnuPG v1.4.11 (GNU/Linux)Comment: Using GnuPG with 
undefined - 
http://www.enigmail.net/iEYEARECAAYFAlCuKqwACgkQC82WwYR1u2ockwCfbeUrmdfFo6wOJwtyF5PrbaKJeZQAn3ikeZemYNxxkonnAe/+bdvgHGzs=gXFz-END
 PGP SIGNATURE-

___
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog

Re: [swinog] Yet another "need hardware now" - 100mbit SFP

[Silvan Gebhardt]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

so basically what I have is the all SFP Switch, with 24 Fibre Ports on
FastEthernet and 2 Gigabit Ports. Gigabit is all taken since we have 5
switches in a ring.

Therefore I have some situation where my CPE is not appropriate and I
wanted to use SX or LX fibre there. 1000BASE TX do not work.

Best
Silvan

Am 22.11.2012 13:08, schrieb vwat...@dancendrumarts.com:
> Frederic:
> 
> You are quite right, I stand corrected! The 3400g-2cs has only two 
> 10/100/1000 ports and the 3400g-12cs has 12 such ports. My main
> point was that these switches support SFP on other than uplink
> ports and the me 3400-24ts does not. Thanks for the correction.
> Best Regards,
> 
> Vinnie
> 
> 
> -Original Message- *From:* Frederic Gargula
> [mailto:frederic.garg...@ip-max.net] *Sent:* Thursday, November 22,
> 2012 12:03 PM *To:* vwat...@dancendrumarts.com *Cc:* 'Silvan
> Gebhardt', swi...@swinog.ch *Subject:* Re: [swinog] Yet another
> "need hardware now" - 100mbit SFP
> 
> Hello, ME 3400G-2CS has only 2 10/100/1000 ports. Best regards,
> Frederic Gargula IP-Max On Nov 22, 2012, at 11:58 AM,
> vwat...@dancendrumarts.com wrote: > Hi Silvan: > > Hope you are
> doing well. It looks like there is only one model of these switches
> that supports SFP on the 100mbit ports. That model is ME 3400-24FS.
> It supports SFP on the 100mbit ports and on the 2 gbit uplink
> ports. > > The other switch from this platform that has only
> 10/100mbit ports (ME 3400-24TS) only supports SFP on the 2 gigabit
> uplink ports. > > The remainder of the switches in this series:
>>> ME 3400G-12CS > ME 3400G-2CS > > Both have 24 10/100/1000 Dual
> purpose ports that support SFP and RJ45. I hope this helps. Best 
> Regards, > > Vinniw Watson > > > -Original Message- >
> From: Silvan Gebhardt [mailto:gebha...@openfactory.ch] > Sent:
> Thursday, November 22, 2012 10:54 AM > To: swi...@swinog.ch >
> Subject: [swinog] Yet another "need hardware now" - 100mbit SFP > >
> -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Folks, I have an
> ME3400. I need SFP that work on the 100mbit ports, I need 1x LX 2x
> SX OR: 3x 100mbit Copper please note, the fastethernet ports on
> this switch do not accept the 100BASE-SX or LX from cisco at all.
> anyone that can help me out with SFP that work in that cisco switch
> please contact me offlist with a good offer. Best Silvan -BEGIN
> PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment:
> Using GnuPG with undefined - http://www.enigmail.net/ 
> iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo 
> x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -END PGP SIGNATURE-
> > ___ > swinog mailing
> list > swinog@lists.swinog.ch > 
> http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with undefined - http://www.enigmail.net/

iEYEARECAAYFAlCuKqwACgkQC82WwYR1u2ockwCfbeUrmdfFo6wOJwtyF5PrbaKJ
eZQAn3ikeZemYNxxkonnAe/+bdvgHGzs
=gXFz
-END PGP SIGNATURE-



smime.p7s
Description: S/MIME Kryptografische Unterschrift

___
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog

Re: [swinog] Yet another"needhardwarenow"- 100mbit SFP

[vwatson]

Frederic:


You are quite right, I stand corrected! The 3400g-2cs has only two 10/100/1000 
ports and the 3400g-12cs has 12 such ports. My main point was that these 
switches support SFP on other than uplink ports and the me 3400-24ts does not. 
Thanks for the correction. Best Regards,


Vinnie



-Original Message-
From: Frederic Gargula [mailto:frederic.garg...@ip-max.net]
Sent: Thursday, November 22, 2012 12:03 PM
To: vwat...@dancendrumarts.com
Cc: 'Silvan Gebhardt', swi...@swinog.ch
Subject: Re: [swinog] Yet another "need hardware now" - 100mbit SFP

Hello,ME 3400G-2CS has only 2 10/100/1000 ports.Best regards,Frederic 
GargulaIP-MaxOn Nov 22, 2012, at 11:58 AM, vwat...@dancendrumarts.com wrote:> 
Hi Silvan:> > Hope you are doing well. It looks like there is only one model of 
these switches that supports SFP on the 100mbit ports. That model is ME 
3400-24FS. It supports SFP on the 100mbit ports and on the 2 gbit uplink ports. 
> > The other switch from this platform that has only 10/100mbit ports (ME 
3400-24TS) only supports SFP on the 2 gigabit uplink ports.> > The remainder of 
the switches in this series:> > ME 3400G-12CS> ME 3400G-2CS> > Both have 24 
10/100/1000 Dual purpose ports that support SFP and RJ45. I hope this helps. 
Best Regards,> > Vinniw Watson> > > -Original Message-> From: Silvan 
Gebhardt [mailto:gebha...@openfactory.ch]> Sent: Thursday, November 22, 2012 
10:54 AM> To: swi...@swinog.ch> Subject: [swinog] Yet another "need hardware 
now" - 100mbit SFP> > -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Folks, I 
have an ME3400. I need SFP that work on the 100mbit ports, I need 1x LX 2x SX 
OR: 3x 100mbit Copper please note, the fastethernet ports on this switch do not 
accept the 100BASE-SX or LX from cisco at all. anyone that can help me out with 
SFP that work in that cisco switch please contact me offlist with a good offer. 
Best Silvan -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) 
Comment: Using GnuPG with undefined - http://www.enigmail.net/ 
iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo 
x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -END PGP SIGNATURE- > 
___> swinog mailing list> 
swinog@lists.swinog.ch> http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog

___
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog

Re: [swinog] Yet another "need hardware now" - 100mbit SFP

[Thomas Weible - FLEXOPTIX]

Hi Silvan,

mmmh, I assume you have ME-3400-24FS-A and according to 
http://www.cisco.com/en/US/prod/collateral/switches/ps6568/ps6580/product_data_sheet0900aecd8034fef3.html
 all 24 SFP ports should support 100BASE-FX, LX, BX, etc. even the two SFP 
Gigabit ports do support 100BASE-X operations.

Can you explain in more detail what issue you are facing so we can better help?

regards Thomas

Von: swinog-boun...@lists.swinog.ch [mailto:swinog-boun...@lists.swinog.ch] Im 
Auftrag von Silvan M. Gebhardt
Gesendet: Donnerstag, 22. November 2012 12:06
An: Frederic Gargula; vwat...@dancendrumarts.com
Cc: swi...@swinog.ch
Betreff: Re: [swinog] Yet another "need hardware now" - 100mbit SFP

We use the fully sfp model. The giga ports are taken with sfp cables for 
uplink. We run 100bas bx on the fa ports. But I have some special cases and I 
don't want regular cpe here.


Frederic Gargula 
mailto:frederic.garg...@ip-max.net>> schrieb:

Hello,

ME 3400G-2CS has only 2 10/100/1000 ports.

Best regards,

Frederic Gargula
IP-Max


On Nov 22, 2012, at 11:58 AM, 
vwat...@dancendrumarts.com wrote:

Hi Silvan:

Hope you are doing well. It looks like there is only one model of these 
switches that supports SFP on the 100mbit ports. That model is ME 3400-24FS. It 
supports SFP on the 100mbit ports and on the 2 gbit uplink ports.

The other switch from this platform that has only 10/100mbit ports  (ME 
3400-24TS) only supports SFP on the 2 gigabit uplink ports.

The remainder of the switches in this series:

ME 3400G-12CS
ME 3400G-2CS

Both have 24 10/100/1000 Dual purpose ports that support SFP

  and

RJ45. I hope this helps. Best Regards,

Vinniw Watson


-Original Message-
From: Silvan Gebhardt [mailto:gebha...@openfactory.ch]
Sent: Thursday, November 22, 2012 10:54 AM
To: swi...@swinog.ch
Subject: [swinog] Yet another "need hardware now" - 100mbit SFP

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Folks, I have an ME3400. I 
need SFP that work on the 100mbit ports, I need 1x LX 2x SX OR: 3x 100mbit 
Copper please note, the fastethernet ports on this switch do not accept the 
100BASE-SX or LX from cisco at all. anyone that can help me out with SFP that 
work in that cisco switch please contact me offlist with a good offer. Best 
Silvan -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) 
Comment: Using GnuPG with undefined - http://www.enigmail.net/ 
iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo 
x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -END P

 GP

SIGNATURE-



swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog



--
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet.

___
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog

Re: [swinog] Yet another "need hardware now" - 100mbit SFP

[Silvan M. Gebhardt]

We use the fully sfp model. The giga ports are taken with sfp cables for 
uplink. We run 100bas bx on the fa ports. But I have some special cases and I 
don't want regular cpe here. 



Frederic Gargula  schrieb:

>Hello,
>
>ME 3400G-2CS has only 2 10/100/1000 ports.
>
>Best regards,
>
>Frederic Gargula
>IP-Max
>
>
>On Nov 22, 2012, at 11:58 AM, vwat...@dancendrumarts.com wrote:
>
>> Hi Silvan:
>> 
>> Hope you are doing well. It looks like there is only one model of
>these switches that supports SFP on the 100mbit ports. That model is ME
>3400-24FS. It supports SFP on the 100mbit ports and on the 2 gbit
>uplink ports. 
>> 
>> The other switch from this platform that has only 10/100mbit ports 
>(ME 3400-24TS) only supports SFP on the 2 gigabit uplink ports.
>> 
>> The remainder of the switches in this series:
>> 
>> ME 3400G-12CS
>> ME 3400G-2CS
>> 
>> Both have 24 10/100/1000 Dual purpose ports that support SFP and
>RJ45. I hope this helps. Best Regards,
>> 
>> Vinniw Watson
>> 
>>  
>> -Original Message-
>> From: Silvan Gebhardt [mailto:gebha...@openfactory.ch]
>> Sent: Thursday, November 22, 2012 10:54 AM
>> To: swi...@swinog.ch
>> Subject: [swinog] Yet another "need hardware now" - 100mbit SFP
>> 
>> -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Folks, I have an
>ME3400. I need SFP that work on the 100mbit ports, I need 1x LX 2x SX
>OR: 3x 100mbit Copper please note, the fastethernet ports on this
>switch do not accept the 100BASE-SX or LX from cisco at all. anyone
>that can help me out with SFP that work in that cisco switch please
>contact me offlist with a good offer. Best Silvan -BEGIN PGP
>SIGNATURE- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG
>with undefined - http://www.enigmail.net/
>iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo
>x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J =zFfO -END PGP SIGNATURE- 
>> ___
>> swinog mailing list
>> swinog@lists.swinog.ch
>> http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog

-- 
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet.
___
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog

Re: [swinog] Yet another "need hardware now" - 100mbit SFP

[vwatson]

Hi Silvan:


Hope you are doing well. It looks like there is only one model of these 
switches that supports SFP on the 100mbit ports. That model is ME 3400-24FS. It 
supports SFP on the 100mbit ports and on the 2 gbit uplink ports.


The other switch from this platform that has only 10/100mbit ports (ME 
3400-24TS) only supports SFP on the 2 gigabit uplink ports.


The remainder of the switches in this series:


ME 3400G-12CS
ME 3400G-2CS


Both have 24 10/100/1000 Dual purpose ports that support SFP and RJ45. I hope 
this helps. Best Regards,


Vinniw Watson



-Original Message-
From: Silvan Gebhardt [mailto:gebha...@openfactory.ch]
Sent: Thursday, November 22, 2012 10:54 AM
To: swi...@swinog.ch
Subject: [swinog] Yet another "need hardware now" - 100mbit SFP

-BEGIN PGP SIGNED MESSAGE-Hash: SHA1Hi Folks,I have an ME3400.I need 
SFP that work on the 100mbit ports,I need1x LX2x SXOR:3x 100mbit Copperplease 
note, the fastethernet ports on this switch do not accept the100BASE-SX or LX 
from cisco at all.anyone that can help me out with SFP that work in that cisco 
switchplease contact me offlist with a good offer.BestSilvan-BEGIN PGP 
SIGNATURE-Version: GnuPG v1.4.11 (GNU/Linux)Comment: Using GnuPG with 
undefined - 
http://www.enigmail.net/iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVox0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J=zFfO-END
 PGP SIGNATURE-

___
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog

[swinog] Yet another "need hardware now" - 100mbit SFP

[Silvan Gebhardt]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hi Folks,

I have an ME3400.


I need SFP that work on the 100mbit ports,


I need

1x LX
2x SX

OR:
3x 100mbit Copper


please note, the fastethernet ports on this switch do not accept the
100BASE-SX or LX from cisco at all.


anyone that can help me out with SFP that work in that cisco switch
please contact me offlist with a good offer.

Best
Silvan
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with undefined - http://www.enigmail.net/

iEYEARECAAYFAlCt9msACgkQC82WwYR1u2qv/ACgm/SF7Q5hyfEDPlnlqybLbhVo
x0sAn1tVIo2VXa0HZyYlKbNo/zxv0l3J
=zFfO
-END PGP SIGNATURE-



smime.p7s
Description: S/MIME Kryptografische Unterschrift

___
swinog mailing list
swinog@lists.swinog.ch
http://lists.swinog.ch/cgi-bin/mailman/listinfo/swinog