AW: [swinog] S.HDSL modem

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Michel we're also using the Watson5 :) cheers Alain -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Michel Renfer Gesendet: Mittwoch, 11. August 2004 11:38 An: [EMAIL PROTECTED] Betreff:

AW: [swinog] S.HDSL modem

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 just happy with a produkt we used to have RAD modems/bridge installed, but they are to expensive my 5 cents cheers alain -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von ueli heuer Gesendet:

[swinog] VRRP between Juniper and Cisco

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 hi guys does somebody have a hint how to get vrrp to work between a 7500 and an m40 ? the juniper stays always in master state :( even when changing the priority thanks alain -BEGIN PGP SIGNATURE- Version: PGP 8.0.2

AW: [swinog] 45 Mbit/s Cisco Interface

i just have used the coax one: get a PA-DS3 with BNC connector and buy a 10db attenuator 75ohm from any distributor and put the attenuator on the rx port of the PA-DS3 interface. if you don't use the attenuator, the clocking signal cannot synchonize. if you have both side, pay attention to the

AW: [swinog] IP-Plus Problems?

no problems seen :-) cheers alain traceroute to www.ip-plus.net (164.128.252.6), 30 hops max, 40 byte packets 1 flu-core-01-gig9-0-0.tiscali.ch (212.40.5.2) 0 ms 1 ms 1 ms 2 so-2-1-2.bsl10.ip.tiscali.net (213.200.70.5) 2 ms 1 ms 1 ms 3 so-5-0-0.fra30.ip.tiscali.net (213.200.82.101) 5

AW: [swinog] Catalyst 5500 Supervisor III Ram

Hi Matthias try Kingston Memory Cheers Alain -Tiscali DataComm AG /.\/.\/.\Alain Pellmont /.\/.\/.\Dipl. El.-Ing. ETH /.\/.\/.\Network Engineer - Flughafenstr. 10 CH-4056 Basel Tel: +41 (0)61 561 11 11 Fax: +41 (0)61 383 28 38 Hotline: 0900 57 53 02 Portal: http